powerpc/CoreNet: add tool to support pbl image build.

Provides a tool to build boot Image for PBL(Pre boot loader) which is
used on Freescale CoreNet SoCs, PBL can be used to load some instructions
and/or data for pre-initialization. The default output image is u-boot.pbl,
for more details please refer to doc/README.pblimage.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

4 files changed, 84 insertions, 0 deletions

diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg
new file mode 100644
index 0000000000..50806ca8a0
--- /dev/null
+++ b/board/freescale/corenet_ds/pbi.cfg
@@ -0,0 +1,51 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Initialize CPC1 as 1MB SRAM
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/corenet_ds/rcw_p3041ds.cfg b/board/freescale/corenet_ds/rcw_p3041ds.cfg
new file mode 100644
index 0000000000..8813156219
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p3041ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P3041DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+12600000 00000000 241C0000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p4080ds.cfg b/board/freescale/corenet_ds/rcw_p4080ds.cfg
new file mode 100644
index 0000000000..6a26339599
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p4080ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P4080DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+105a0000 00000000 1e1e181e 0000cccc
+58400000 3c3c2000 58000000 e1000000
+00000000 00000000 00000000 008b6000
+00000000 00000000 00000000 00000000
diff --git a/board/freescale/corenet_ds/rcw_p5020ds.cfg b/board/freescale/corenet_ds/rcw_p5020ds.cfg
new file mode 100644
index 0000000000..b09e409bbf
--- /dev/null
+++ b/board/freescale/corenet_ds/rcw_p5020ds.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for P5020DS.
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+0C540000 00000000 1E120000 00000000
+D8984A01 03002000 58000000 41000000
+00000000 00000000 00000000 10070000
+00000000 00000000 00000000 00000000