arm, am33xx: update for siemens am335x based boards

updates for the siemens am335x based boards:

- draco: add delay for DDR3 configuration
- change MTD partition layout and add a possibility
  to redefine MTD layout in board header.
- move ubi support to common header file
- draco: improve dtb naming
- draco: set CONFIG_SYS_CBSIZE to 1024
- add generic env based led
  Leds can now be defined in Environment
- add generic env based dfu button
  Which gpio is used for the dfu button can be defined
  through the Environment
- set MACH_TYPE only if defined
- draco: increase CPU freq to 300MHz
- Add time command to siemens am33xx boards
- DDR3: increase default tRFC
- draco: enable pullup for DFU and ERST pin
- change print format DDR3

Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Acked-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Heiko Schocher <hs@denx.de>

4 files changed, 168 insertions, 68 deletions

diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index fb2de48fbc..c127f6ca27 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -75,8 +75,9 @@ int board_init(void)
 	i2c_set_bus_num(0);
 	if (read_eeprom() < 0)
 		puts("Could not get board ID.\n");
-
+#ifdef CONFIG_MACH_TYPE
 	gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
+#endif
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
 
 #ifdef CONFIG_FACTORYSET
@@ -102,21 +103,29 @@ const struct dpll_params *get_dpll_ddr_params(void)
 }
 
 #ifndef CONFIG_SPL_BUILD
+
+#define MAX_NR_LEDS	10
+#define MAX_PIN_NUMBER	128
+#define STARTUP	0
+
 #if defined(BOARD_DFU_BUTTON_GPIO)
-/*
- * This command returns the status of the user button on
- * Input - none
- * Returns -	1 if button is held down
- *		0 if button is not held down
- */
-static int
-do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+unsigned char get_button_state(char * const envname, unsigned char def)
 {
 	int button = 0;
 	int gpio;
+	char *ptr_env;
 
-	gpio = BOARD_DFU_BUTTON_GPIO;
-	gpio_request(gpio, "DFU");
+	/* If button is not found we take default */
+	ptr_env = getenv(envname);
+	if (NULL == ptr_env) {
+		gpio = def;
+	} else {
+		gpio = (unsigned char)simple_strtoul(ptr_env, NULL, 0);
+		if (gpio > MAX_PIN_NUMBER)
+			gpio = def;
+	}
+
+	gpio_request(gpio, "");
 	gpio_direction_input(gpio);
 	if (gpio_get_value(gpio))
 		button = 1;
@@ -127,53 +136,27 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 	return button;
 }
-
-U_BOOT_CMD(
-	dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
-	"Return the status of the DFU button",
-	""
-);
-#endif
-/*
- * This command sets led
- * Input -	name of led
- *		value of led
- * Returns -	1 if input does not match
- *		0 if led was set
+/**
+ * This command returns the status of the user button on
+ * Input - none
+ * Returns -	1 if button is held down
+ *		0 if button is not held down
  */
 static int
-do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	int gpio = 0;
-	if (argc != 3)
-		goto exit;
-#if defined(BOARD_STATUS_LED)
-	if (!strcmp(argv[1], "stat"))
-		gpio = BOARD_STATUS_LED;
-#endif
-#if defined(BOARD_DFU_BUTTON_LED)
-	if (!strcmp(argv[1], "dfu"))
-		gpio = BOARD_DFU_BUTTON_LED;
-#endif
-	/* If argument does not mach exit */
-	if (gpio == 0)
-		goto exit;
-	gpio_request(gpio, "");
-	gpio_direction_output(gpio, 1);
-	if (!strcmp(argv[2], "1"))
-		gpio_set_value(gpio, 1);
-	else
-		gpio_set_value(gpio, 0);
-	return 0;
-exit:
-	return 1;
+	int button = 0;
+	button = get_button_state("button_dfu0", BOARD_DFU_BUTTON_GPIO);
+	button |= get_button_state("button_dfu1", BOARD_DFU_BUTTON_GPIO);
+	return button;
 }
 
 U_BOOT_CMD(
-	led, CONFIG_SYS_MAXARGS, 2, do_setled,
-	"Set led on or off",
-	"dfu val - set dfu led\nled stat val - set status led"
+	dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
+	"Return the status of the DFU button",
+	""
 );
+#endif
 
 static int
 do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -189,4 +172,95 @@ U_BOOT_CMD(
 	"Sends U-Boot into infinite loop",
 	""
 );
+
+/**
+ * Get led gpios from env and set them.
+ * The led define in environment need to need to be of the form ledN=NN,S0,S1
+ * where N is an unsigned integer from 0 to 9 and S0 and S1 is 0 or 1. S0
+ * defines the startup state of the led, S1 the special state of the led when
+ * it enters e.g. dfu mode.
+ */
+void set_env_gpios(unsigned char state)
+{
+	char *ptr_env;
+	char str_tmp[5];	/* must contain "ledX"*/
+	char num[1];
+	unsigned char i, idx, pos1, pos2, ccount;
+	unsigned char gpio_n, gpio_s0, gpio_s1;
+
+	for (i = 0; i < MAX_NR_LEDS; i++) {
+		strcpy(str_tmp, "led");
+		sprintf(num, "%d", i);
+		strcat(str_tmp, num);
+
+		/* If env var is not found we stop */
+		ptr_env = getenv(str_tmp);
+		if (NULL == ptr_env)
+			break;
+
+		/* Find sperators position */
+		pos1 = 0;
+		pos2 = 0;
+		ccount = 0;
+		for (idx = 0; ptr_env[idx] != '\0'; idx++) {
+			if (ptr_env[idx] == ',') {
+				if (ccount++ < 1)
+					pos1 = idx;
+				else
+					pos2 = idx;
+			}
+		}
+		/* Bad led description skip this definition */
+		if (pos2 <= pos1 || ccount > 2)
+			continue;
+
+		/* Get pin number and request gpio */
+		memset(str_tmp, 0, sizeof(str_tmp));
+		strncpy(str_tmp, ptr_env, pos1*sizeof(char));
+		gpio_n = (unsigned char)simple_strtoul(str_tmp, NULL, 0);
+
+		/* Invalid gpio number skip definition */
+		if (gpio_n > MAX_PIN_NUMBER)
+			continue;
+
+		gpio_request(gpio_n, "");
+
+		if (state == STARTUP) {
+			/* get pin state 0 and set */
+			memset(str_tmp, 0, sizeof(str_tmp));
+			strncpy(str_tmp, ptr_env+pos1+1,
+				(pos2-pos1-1)*sizeof(char));
+			gpio_s0 = (unsigned char)simple_strtoul(str_tmp, NULL,
+								0);
+
+			gpio_direction_output(gpio_n, gpio_s0);
+
+		} else {
+			/* get pin state 1 and set */
+			memset(str_tmp, 0, sizeof(str_tmp));
+			strcpy(str_tmp, ptr_env+pos2+1);
+			gpio_s1 = (unsigned char)simple_strtoul(str_tmp, NULL,
+								0);
+			gpio_direction_output(gpio_n, gpio_s1);
+		}
+	} /* loop through defined led in environment */
+}
+
+static int do_board_led(cmd_tbl_t *cmdtp, int flag, int argc,
+			   char *const argv[])
+{
+	if (argc != 2)
+		return CMD_RET_USAGE;
+	if ((unsigned char)simple_strtoul(argv[1], NULL, 0) == STARTUP)
+		set_env_gpios(0);
+	else
+		set_env_gpios(1);
+	return 0;
+};
+
+U_BOOT_CMD(
+	draco_led, CONFIG_SYS_MAXARGS, 2,	do_board_led,
+	"Set LEDs defined in environment",
+	"<0|1>"
+);
 #endif /* !CONFIG_SPL_BUILD */
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index ede73baf3e..2697762076 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -43,7 +43,7 @@ static struct draco_baseboard_id __attribute__((section(".data"))) settings;
 /* Default@303MHz-i0 */
 const struct ddr3_data ddr3_default = {
 	0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
-	0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+	0x0079, 0x0888A39B, 0x26517FDA, 0x501F84EF, 0x00100206, 0x61A44A32,
 	0x0000093B, 0x0000014A,
 	"default name @303MHz           \0",
 	"default marking                \0",
@@ -71,8 +71,8 @@ static void print_ddr3_timings(void)
 	printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
 	printf("device:\t\t%s\n", settings.ddr3.manu_name);
 	printf("marking:\t%s\n", settings.ddr3.manu_marking);
-	printf("timing parameters\n");
-	printf("diff\teeprom\tdefault\n");
+	printf("%-20s, %-8s, %-8s, %-4s\n", "timing parameters", "eeprom",
+	       "default", "diff");
 	PRINTARGS(magic);
 	PRINTARGS(version);
 	PRINTARGS(ddr3_sratio);
@@ -96,9 +96,12 @@ static void print_ddr3_timings(void)
 
 static void print_chip_data(void)
 {
+	struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
 	printf("\nCPU BOARD\n");
 	printf("device: \t'%s'\n", settings.chip.sdevname);
 	printf("hw version: \t'%s'\n", settings.chip.shwver);
+	printf("max freq: \t%d MHz\n", dpll_mpu_opp100.m);
 }
 #endif /* CONFIG_SPL_BUILD */
 
@@ -193,6 +196,11 @@ struct ctrl_ioregs draco_ddr3_ioregs = {
 
 	config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
 		   &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
+
+	/* For Samsung 2Gbit RAM we need this delay otherwise config fails after
+	 * soft reset.
+	 */
+	udelay(2000);
 }
 
 static void spl_siemens_board_init(void)
@@ -201,6 +209,26 @@ static void spl_siemens_board_init(void)
 }
 #endif /* if def CONFIG_SPL_BUILD */
 
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	omap_nand_switch_ecc(1, 8);
+#ifdef CONFIG_FACTORYSET
+	/* Set ASN in environment*/
+	if (factory_dat.asn[0] != 0) {
+		setenv("dtb_name", (char *)factory_dat.asn);
+	} else {
+		/* dtb suffix gets added in load script */
+		setenv("dtb_name", "am335x-draco");
+	}
+#else
+	setenv("dtb_name", "am335x-draco");
+#endif
+
+	return 0;
+}
+#endif
+
 #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
 	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
 static void cpsw_control(int enabled)
@@ -280,13 +308,4 @@ U_BOOT_CMD(
 #endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
 #endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
 
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-	omap_nand_switch_ecc(1, 8);
-
-	return 0;
-}
-#endif
-
 #include "../common/board.c"
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
index ff8ab764c5..8856fd0f86 100644
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@@ -16,9 +16,13 @@
 #ifndef _BOARD_H_
 #define _BOARD_H_
 
-#define PARGS3(x)	settings.ddr3.x-ddr3_default.x, \
-			settings.ddr3.x, ddr3_default.x
-#define PRINTARGS(y)	printf("%x, %8x, %8x : "#y"\n", PARGS3(y))
+#define PARGS(x)	#x , /* Parameter Name */ \
+			settings.ddr3.x, /* EEPROM Value */ \
+			ddr3_default.x, /* Default Value */ \
+			settings.ddr3.x-ddr3_default.x /* Difference */
+
+#define PRINTARGS(y)	printf("%-20s, %8x, %8x, %4d\n", PARGS(y))
+
 #define MAGIC_CHIP	0x50494843
 
 /* Automatic generated definition */
@@ -69,4 +73,7 @@ void enable_uart4_pin_mux(void);
 void enable_uart5_pin_mux(void);
 void enable_i2c0_pin_mux(void);
 void enable_board_pin_mux(void);
+
+/* Forwared declaration, defined in common board.c */
+void set_env_gpios(unsigned char state);
 #endif
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
index eaa3c70798..dbcc80b61f 100644
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@@ -60,7 +60,7 @@ static struct module_pin_mux nand_pin_mux[] = {
 
 static struct module_pin_mux gpios_pin_mux[] = {
 	/* DFU button GPIO0_27*/
-	{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)},
+	{OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)},
 	{OFFSET(gpmc_csn3), MODE(7) },			/* LED0 GPIO2_0 */
 	{OFFSET(emu0), MODE(7)},			/* LED1 GPIO3_7 */
 	/* Triacs in HW Rev 2 */
@@ -222,7 +222,7 @@ static struct module_pin_mux gpios_pin_mux[] = {
 	{OFFSET(vrefp), MODE(7) | RXACTIVE | PULLUDDIS},
 	{OFFSET(vrefn), MODE(7) | RXACTIVE | PULLUDDIS},
 	/* nRST for SMSC LAN9303 switch - GPIO2_24 */
-	{OFFSET(lcd_pclk), MODE(7) },			/* LAN9303 nRST */
+	{OFFSET(lcd_pclk), MODE(7) | PULLUDEN | PULLUP_EN }, /* LAN9303 nRST */
 	{-1},
 };