x86: Remove Unmaintained Boards

The SC520 CDP boards originally implemented by Daniel Engström are now
very broken. Attempts to contact Daniel via the email address on the
copyright notice have failed. Remove these boards from mainline

1 files changed, 0 insertions, 91 deletions

diff --git a/board/sc520_cdp/u-boot.lds b/board/sc520_cdp/u-boot.lds
deleted file mode 100644
index df437c72a3..0000000000
--- a/board/sc520_cdp/u-boot.lds
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(_start)
-
-SECTIONS
-{
-	. = 0x387c0000;                     /* Where bootcode in the flash is mapped */
-	.text  : { *(.text); }
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = 0x400000;	                    /* Ram data segment to use */
-	_i386boot_romdata_dest = ABSOLUTE(.);
-	.data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) }
-	_i386boot_romdata_start = LOADADDR(.data);
-
-	. = ALIGN(4);
-	.got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) }
-	_i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got);
-
-
-	. = ALIGN(4);
-	_i386boot_bss_start = ABSOLUTE(.);
-	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
-	_i386boot_bss_size = SIZEOF(.bss);
-
-
-	/* 16bit realmode trampoline code */
-	.realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) ) { *(.realmode) }
-
-	_i386boot_realmode = LOADADDR(.realmode);
-	_i386boot_realmode_size = SIZEOF(.realmode);
-
-	/* 16bit BIOS emulation code (just enough to boot Linux) */
-	.bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
-
-	_i386boot_bios = LOADADDR(.bios);
-	_i386boot_bios_size = SIZEOF(.bios);
-
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-	/* The load addresses below assumes that the flash
-	 * will be mapped so that 0x387f0000 == 0xffff0000
-	 * at reset time
-	 *
-	 * The fe00 and ff00 offsets of the start32 and start16
-	 * segments are arbitrary, the just have to be mapped
-	 * at reset and the code have to fit.
-	 * The fff0 offset of resetvec is important, however.
-	 */
-
-
-	. = 0xfffffe00;
-	.start32 : AT (0x387ffe00) { *(.start32); }
-
-	. = 0xff00;
-	.start16 : AT (0x387fff00) { *(.start16); }
-
-	. = 0xfff0;
-	.resetvec : AT (0x387ffff0) { *(.resetvec); }
-	_i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) );
-}