* Rename SBC8560 into sbc8560 for consistency

* Patch by Daniel Poirot, 24 Jun 2004:
  Add support for Wind River's sbc8240 board

* Patches by Yasushi Shoji, 26 Jun 2004:
  - drivers/serial_xuartlite.c: fix "return 0" in void function
  - add microblaze support to mkimage tool

1 files changed, 140 insertions, 0 deletions

diff --git a/board/sbc8240/README b/board/sbc8240/README
new file mode 100644
index 0000000000..703565d86c
--- /dev/null
+++ b/board/sbc8240/README
@@ -0,0 +1,140 @@
+The supported features of the SBC8240/8245 board are:
+    8240 or 8245 processor
+    66MHz & 100MHz bus speed
+    Decrementer timer
+    1 UART channel (Console channel)
+    8240 Interrupt Controller
+    8240 PCI bridge
+    8240 Memory Controller
+    SDRAM (16, 64 MB Memory DIMM)
+    FLASH 512K On board
+    FLASH 4MB On board
+
+
+Memory Map from CPU point of view:
+
+    Start        Size   Access to
+    -----------------------------------------------------
+    0x00000000   64MB   SDRAM DIMM
+    0xFF000000    4MB   On Board FLASH
+    0xFFF00000  512K    On Board FLASH or SRAM (Configured by jumper)
+    0xFFE00000    8K    EEPROM
+    0xFFE80000    8Bit  LED
+    0xFFF80000    8Bit  UART
+
+
+Setting the board Jumpers & Switches:
+
+   In order to get the board running with the default configuration the
+   jumpers need to be set as follows:
+
+  General Jumpers:
+    ____________________________________________
+   |   Jumpers   |   Jumpers    |    Jumpers    |
+   |-------------|--------------|---------------|
+   |JP1     1-2  | JP14    1-2  | JP27    1-2   |
+   |JP5     Open | JP15    1-2  | JP28    2-3   |
+   |JP8     1-2  | JP16    1-2  | JP33    Open  |
+   |JP9     1-2  | JP17    1-2  | JP37    Close |
+   |JP10    1-2  | JP18    1-2  |               |
+   |JP11    2-3  | JP19    1-2  |               |
+   |JP12    1-2  | JP20    1-2  |               |
+   |JP13    1-2  | JP25    Open |               |
+   |_____________|______________|_______________|
+
+  Bus speed Jumpers:
+    _________________________
+   | 100MHz Bus | 66 MHz Bus |
+   |------------|------------|
+   | JP2    1-2 | JP2    1-2 |
+   | JP3    1-2 | JP3    2-3 |
+   | JP4    1-2 | JP4    2-3 |
+   | JP6    1-2 | JP6    2-3 |
+   | JP7    1-2 | JP7    1-2 |
+   |____________|____________|
+
+
+U-Boot 1.1.2 (Jun 24 2004 - 17:01:04)
+
+CPU:   MPC8240 Revision 1.1 at 247.500 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: sbc8240 Revision 255 Local Bus at 99 MHz
+DRAM:  64 MB
+FLASH: 512 kB
+        00  11  8086  1229  0200  00
+In:    serial
+Out:   serial
+Err:   serial
+Net:   i82559#0
+
+Welcome to U-Boot for the sbc8240
+
+Type ? or help to get on-line help
+
+Hit any key to stop autoboot:  0
+=> printenv
+bootcmd=version;echo;tftpboot $loadaddr $loadfile;bootvx
+bootdelay=5
+baudrate=9600
+ethaddr=DE:AD:BE:EF:01:01
+ipaddr=192.168.193.102
+preboot=echo;echo Welcome to U-Boot for the sbc8240;echo;echo Type "? or help" to get on-line help;echo
+netmask=255.255.255.248
+clocks_in_mhz=1
+bootargs=$fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei
+ipaddr=192.168.193.102
+loadfile=vxWorks.st
+loadaddr=0x01000000
+net_load=tftpboot $loadaddr $loadfile
+serverip=192.168.193.99
+ethact=i82559#0
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 631/16380 bytes
+=> boot
+
+U-Boot 1.1.2 (Jun 24 2004 - 17:01:04)
+
+Using i82559#0 device
+TFTP from server 192.168.193.99; our IP address is 192.168.193.102
+Filename 'vxWorks.st'.
+Load address: 0x1000000
+Loading: #################################################################
+         #################################################################
+         ##############################################################
+done
+Bytes transferred = 979927 (ef3d7 hex)
+## Ethernet MAC address not copied to NV RAM
+Loading .text @ 0x00100000 (758848 bytes)
+Loading .data @ 0x001b9440 (79904 bytes)
+Clearing .bss @ 0x001ccc60 (20288 bytes)
+## Using bootline (@ 0x4200): $fei(0,0)host:/T221ppc/target/config/sbc8240/vxWorks.st e=192.168.193.102 h=192.168.193.99 u=target pw=hello f=0x08 tn=sbc8240 o=fei
+## Starting vxWorks at 0x00100000 ...
+
+Adding 2845 symbols for standalone.
+
+
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+      ]]]]]]]]]]]  ]]]]     ]]]]]]]]]]       ]]              ]]]]         (R)
+ ]     ]]]]]]]]]  ]]]]]]     ]]]]]]]]       ]]               ]]]]
+ ]]     ]]]]]]]  ]]]]]]]]     ]]]]]] ]     ]]                ]]]]
+ ]]]     ]]]]] ]    ]]]  ]     ]]]] ]]]   ]]]]]]]]]  ]]]] ]] ]]]]  ]]   ]]]]]
+ ]]]]     ]]]  ]]    ]  ]]]     ]] ]]]]] ]]]]]]   ]] ]]]]]]] ]]]] ]]   ]]]]
+ ]]]]]     ]  ]]]]     ]]]]]      ]]]]]]]] ]]]]   ]] ]]]]    ]]]]]]]    ]]]]
+ ]]]]]]      ]]]]]     ]]]]]]    ]  ]]]]]  ]]]]   ]] ]]]]    ]]]]]]]]    ]]]]
+ ]]]]]]]    ]]]]]  ]    ]]]]]]  ]    ]]]   ]]]]   ]] ]]]]    ]]]] ]]]]    ]]]]
+ ]]]]]]]]  ]]]]]  ]]]    ]]]]]]]      ]     ]]]]]]]  ]]]]    ]]]]  ]]]] ]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]       Development System
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]]       VxWorks version 5.5.1
+ ]]]]]]]]]]]]]]]]]]]]]]]]]]       KERNEL: WIND version 2.6
+ ]]]]]]]]]]]]]]]]]]]]]]]]]       Copyright Wind River Systems, Inc., 1984-2003
+
+                               CPU: MPC8240 -- Wind River BSP. SBC8240 Board.  Processor #0.
+                              Memory Size: 0x2000000.  BSP version 1.2/28.
+
+->