* Code cleanup:

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

4 files changed, 15 insertions, 13 deletions

diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile
index f912451b3e..0121ddc79c 100644
--- a/board/rbc823/Makefile
+++ b/board/rbc823/Makefile
@@ -28,7 +28,7 @@ LIB	= lib$(BOARD).a
 OBJS	= $(BOARD).o flash.o kbd.o
 
 $(LIB):	.depend $(OBJS)
-	$(AR) crv $@ $^
+	$(AR) crv $@ $(OBJS)
 
 #########################################################################
 
diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c
index f1424e4700..c27929dcd3 100644
--- a/board/rbc823/kbd.c
+++ b/board/rbc823/kbd.c
@@ -48,7 +48,7 @@ void smc1_setbrg (void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
-        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t *cp = &(im->im_cpm);
 
 	/* Set up the baud rate generator.
@@ -65,7 +65,7 @@ void smc1_setbrg (void)
 
 int smc1_init (void)
 {
-        volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile smc_t *sp;
 	volatile smc_uart_t *up;
 	volatile cbd_t *tbdf, *rbdf;
@@ -182,7 +182,7 @@ void smc1_putc(const char c)
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
 	volatile smc_uart_t	*up;
-        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
@@ -210,7 +210,7 @@ int smc1_getc(void)
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
 	volatile smc_uart_t	*up;
-        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 	unsigned char		c;
 
@@ -235,7 +235,7 @@ int smc1_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile smc_uart_t	*up;
-        volatile immap_t	*im = (immap_t *)CFG_IMMR;
+	volatile immap_t	*im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c
index 24ed5018f6..9bb1c1d535 100644
--- a/board/rbc823/rbc823.c
+++ b/board/rbc823/rbc823.c
@@ -151,7 +151,7 @@ long int initdram (int board_type)
     upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
 
     /*
-     * 1 Bank of 64Mbit x 2 devices 
+     * 1 Bank of 64Mbit x 2 devices
      */
     memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
     memctl->memc_mar  = 0x00000088;
@@ -164,8 +164,8 @@ long int initdram (int board_type)
     memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
     udelay(200);
 
-    /* 
-     * Perform SDRAM initializsation sequence 
+    /*
+     * Perform SDRAM initializsation sequence
      */
     memctl->memc_mcr  = 0x80008105;	/* SDRAM bank 0 */
     udelay(1);
@@ -174,7 +174,7 @@ long int initdram (int board_type)
     memctl->memc_mcr  = 0x80008130;	/* SDRAM bank 0 - execute twice */
     udelay(1);
     memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
-    udelay(200); 
+    udelay(200);
 
     memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
     udelay (1000);
@@ -185,7 +185,7 @@ long int initdram (int board_type)
      * with two SDRAM banks or four cycles every 31.2 us with one
      * bank. It will be adjusted after memory sizing.
      */
-    memctl->memc_mptpr = CFG_MPTPR_2BK_4K; // 16: but should be: CFG_MPTPR_1BK_4K
+    memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /* 16: but should be: CFG_MPTPR_1BK_4K */
 
     /*
      * Check Bank 0 Memory Size for re-configuration
@@ -289,4 +289,3 @@ void doc_init(void)
 
     doc_probe(FLASH_BASE1_PRELIM);
 }
-
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
index ffe7495da1..05f655571f 100644
--- a/board/rbc823/u-boot.lds
+++ b/board/rbc823/u-boot.lds
@@ -109,6 +109,10 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
@@ -131,4 +135,3 @@ SECTIONS
   _end = . ;
   PROVIDE (end = .);
 }
-