* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

3 files changed, 34 insertions, 55 deletions

diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 453e4bb0a0..661fbab0ab 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -23,9 +23,9 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch-arm920t/imx-regs.h>
 
 /* ------------------------------------------------------------------------- */
 
@@ -67,7 +67,6 @@ static inline void delay (unsigned long loops) {
  * Miscellaneous platform dependent initialisations
  */
 
-
 void SetAsynchMode(void) {
 	__asm__ (
 		"mrc p15,0,r0,c1,c0,0 \n"
@@ -85,42 +84,34 @@ int board_init (void) {
 
 	volatile unsigned int  tmp;
 
-	mc9328sid	= MX1_SIDR;
+	mc9328sid	= SIDR;
 
-	MX1_GPCR 	= 0x000003AB;		/* I/O pad driving strength 	*/
+	GPCR 		= 0x000003AB;		/* I/O pad driving strength 	*/
 
 /*	MX1_CS1U 	= 0x00000A00;	*/	/* SRAM initialization 		*/
 /*	MX1_CS1L 	= 0x11110601; 	*/
 
-	MX1_MPCTL0 	= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
-
-/*	MX1_MPCTL0 	= 0x003f1437;	*/ /* setting for 192 MHz MCU PLL CLK	*/
+	MPCTL0 		= 0x04632410;	/* setting for 150 MHz MCU PLL CLK	*/
 
 /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
  * BCLK divider to 2 (i.e. BCLK to 48 MHz)
  */
-	MX1_CSCR 	= 0xAF000403;
+	CSCR 	= 0xAF000403;
 
-	MX1_CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
-	MX1_CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
+	CSCR 	|= 0x00200000;   	/* Trigger the restart bit(bit 21)	*/
+	CSCR 	&= 0xFFFF7FFF;		/* Program PRESC bit(bit 15) to 0 to divide-by-1 */
 
 /* setup cs4 for cs8900 ethernet */
 
-	MX1_CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
-	MX1_CS4L	= 0x00001501;
+	CS4U	= 0x00000F00;	/* Initialize CS4 for CS8900 ethernet 	*/
+	CS4L	= 0x00001501;
 
-	MX1_GIUS_A	&= 0xFF3FFFFF;
-	MX1_GPR_A	&= 0xFF3FFFFF;
+	GIUS(0)	&= 0xFF3FFFFF;
+	GPR(0)	&= 0xFF3FFFFF;
 
 	tmp = *(unsigned int *)(0x1500000C);
 	tmp = *(unsigned int *)(0x1500000C);
 
-/* setup timer 1 as system timer  	*/
-
-	MX1_TPRER1	= 0x1f;		/* divide by 32 		*/
-	MX1_TCTL1	= 0x19;		/* clock in from 32k Osc.	*/
-
-
 	SetAsynchMode();
 
 	gd->bd->bi_arch_number = 160;	/* Arch number of MX1ADS Board 		*/
@@ -131,19 +122,19 @@ int board_init (void) {
 	dcache_enable();
 
 /* set PERCLKs				*/
-	MX1_PCDR = 0x00000055;     	/* set PERCLKS				*/
+	PCDR = 0x00000055;     	/* set PERCLKS				*/
 
 /* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
  * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
  * all sources selected as normal interrupt
  */
-	MX1_INTTYPEH = 0;
-	MX1_INTTYPEL = 0;
 
+/*	MX1_INTTYPEH = 0;
+	MX1_INTTYPEL = 0;
+*/
 	return 0;
 }
 
-
 int board_late_init(void) {
 
 	setenv("stdout", "serial");
@@ -163,13 +154,10 @@ int board_late_init(void) {
 		default :
 			printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
 			break;
-
 	}
-
 	return 0;
 }
 
-
 int dram_init (void) {
 	DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index 09fc0f86e4..eb7fde5071 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -24,7 +24,8 @@
  */
 
 #include <common.h>
-#include <mc9328.h>
+/*#include <mc9328.h>*/
+#include <asm/arch/imx-regs.h>
 
 typedef unsigned long * p_u32;
 
@@ -33,27 +34,26 @@ typedef unsigned long * p_u32;
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /*  Following Setting is for CSD1	*/
-#define SFCTL		0x00221004
-#define reg_SFCTL	__REG(SFCTL)
+#define SFCTL			0x00221004
+#define reg_SFCTL		__REG(SFCTL)
 
-#define SYNCFLASH_A10	(0x00100000)
+#define SYNCFLASH_A10		(0x00100000)
 
-#define CMD_NORMAL	(0x81020300)			/* Normal Mode			*/
-#define CMD_PREC	(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
-#define CMD_AUTO	(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
-#define CMD_LMR		(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
-#define CMD_LCR		(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
-#define CMD_PROGRAM	(CMD_NORMAL + 0x70000000)
+#define CMD_NORMAL		(0x81020300)			/* Normal Mode			*/
+#define CMD_PREC		(CMD_NORMAL + 0x10000000) 	/* Precharge Command		*/
+#define CMD_AUTO		(CMD_NORMAL + 0x20000000) 	/* Auto Refresh Command		*/
+#define CMD_LMR			(CMD_NORMAL + 0x30000000) 	/* Load Mode Register Command 	*/
+#define CMD_LCR			(CMD_NORMAL + 0x60000000) 	/* LCR Command			*/
+#define CMD_PROGRAM		(CMD_NORMAL + 0x70000000)
 
-#define MODE_REG_VAL	(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
+#define MODE_REG_VAL		(CFG_FLASH_BASE+0x0008CC00) 	/* Cas Latency 3		*/
 
 /* LCR Command */
-#define LCR_READSTATUS		(0x0001C000)		/* 0x70				*/
-#define LCR_ERASE_CONFIRM	(0x00008000)		/* 0x20				*/
-#define LCR_ERASE_NVMODE	(0x0000C000)		/* 0x30				*/
-#define LCR_PROG_NVMODE		(0x00028000)		/* 0xA0				*/
-#define LCR_SR_CLEAR		(0x00014000)		/* 0x50				*/
-
+#define LCR_READSTATUS		(0x0001C000)			/* 0x70				*/
+#define LCR_ERASE_CONFIRM	(0x00008000)			/* 0x20				*/
+#define LCR_ERASE_NVMODE	(0x0000C000)			/* 0x30				*/
+#define LCR_PROG_NVMODE		(0x00028000)			/* 0xA0				*/
+#define LCR_SR_CLEAR		(0x00014000)			/* 0x50				*/
 
 /* Get Status register 			*/
 u32 SF_SR(void) {
@@ -82,7 +82,6 @@ u8 SF_Ready(void) {
 
 	if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
 		printf ("SyncFlash Error code %08x\n",tmp);
-
 	};
 
 	if (tmp == 0x00800080) 		/* Test Bit 7 of SR	*/
@@ -98,7 +97,6 @@ void SF_PrechargeAll(void) {
 
 	reg_SFCTL	= CMD_PREC;			/* Set Precharge Command 	*/
 	tmp 		= __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
-
 }
 
 /* set SyncFlash to normal mode			*/
@@ -128,7 +126,6 @@ void SF_Erase(u32 RowAddress) {
 	while(!SF_Ready());
 }
 
-
 void SF_NvmodeErase(void) {
 	SF_PrechargeAll();
 
@@ -149,10 +146,8 @@ void SF_NvmodeWrite(void) {
 
 	reg_SFCTL	= CMD_NORMAL;			/* Return to Normal mode 	*/
 	__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; 	/* Confirm not needed 	*/
-
 }
 
-
 /****************************************************************************************/
 
 ulong flash_init(void) {
@@ -195,7 +190,6 @@ ulong flash_init(void) {
 	return FLASH_BANK_SIZE;
 }
 
-
 void flash_print_info (flash_info_t *info) {
 
 	int i;
@@ -209,7 +203,6 @@ void flash_print_info (flash_info_t *info) {
 			break;
 	}
 
-
 	switch (info->flash_id & FLASH_TYPEMASK) {
 		case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
 			printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
@@ -236,7 +229,6 @@ void flash_print_info (flash_info_t *info) {
 	printf ("\n");
 }
 
-
 /*-----------------------------------------------------------------------*/
 
 int flash_erase (flash_info_t *info, int s_first, int s_last) {
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
index 53743cdb80..649216abda 100644
--- a/board/mx1ads/u-boot.lds
+++ b/board/mx1ads/u-boot.lds
@@ -23,7 +23,6 @@
  * MA 02111-1307 USA
  */
 
-
 OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
 OUTPUT_ARCH(arm)
 ENTRY(_start)
@@ -34,7 +33,7 @@ SECTIONS
 	. = ALIGN(4);
 	.text      :
 	{
-	  cpu/mc9328/start.o	(.text)
+	  cpu/arm920t/start.o	(.text)
 	  *(.text)
 	}