* Patch by Rick Bronson, 16 Mar 2003:

  Add support for Atmel AT91RM9200DK w/NAND

* Patches by Robert Schwebel, 19 Mar 2003:
  - use arm-linux-gcc as default compiler for ARM
  - fix i2c fixup code
  - fix missing baudrate setting
  - added $loadaddr / CFG_LOAD_ADDR support to loadb
  - moved "ignoring trailing characters" _before_ u-boot wants to
    print out diagnostics messages; removes bogus characters at the
    end of transmission

* Patch by John Zhan, 18 Mar 2003:
  Add support for SinoVee Microsystems SC8xx boards

* Patch by Rolf Offermanns, 21 Mar 2003:
  ported the dnp1110 related changes from the current armboot cvs to
  current u-boot cvs. smc91111 does not work. problem marked in
  smc91111.c, grep for "FIXME".

* Patch by Brian Auld, 25 Mar 2003:
  Add support for STM flash chips on ebony board

 * Add PCI support for MPC8250 Boards (PM825 module)

 * Patch by Stefan Roese, 25 Mar 2003:

2 files changed, 22 insertions, 8 deletions

diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index b56707d232..32c57d8d96 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -9,6 +9,9 @@
  * (C) Copyright 2002
  * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
  *
+ * (C) Copyright 2002
+ * Kai-Uwe Bloem, GDS, <kai-uwe.bloem@auerswald.de>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 0176d9c2c3..5ee511764a 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -39,20 +39,28 @@
  * The Innokom board has GPIO70 connected to SCLK which can be toggled
  * until all chips think that their current cycles are finished.
  */
-void i2c_init_board(void)
+int i2c_init_board(void)
 {
-	int i;
+	int i, icr;
 
-	/* set gpio pin to output */
-        GPDR(70) |= GPIO_bit(70);
-	for (i = 0; i < 11; i++) {
+	/* disable I2C controller first, otherwhise it thinks we want to    */
+	/* talk to the slave port...                                        */
+	icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
+	
+	/* set gpio pin low _before_ we change direction to output          */
 		GPCR(70) = GPIO_bit(70);
+	
+	/* now toggle between output=low and high-impedance                 */
+	for (i = 0; i < 20; i++) {
+		GPDR(70) |= GPIO_bit(70);  /* output */
 		udelay(10);
-		GPSR(70)  = GPIO_bit(70);
+		GPDR(70) &= ~GPIO_bit(70); /* input  */
 		udelay(10);
 	}
-        /* set gpio pin to input */
-        GPDR(70) &= ~GPIO_bit(70);
+
+	ICR = icr;
+
+	return 0;
 }
 
 
@@ -98,6 +106,9 @@ int board_init (void)
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = 0xa0000100;
 
+	/* baud rate */
+	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
+
 	return 0;
 }