summaryrefslogtreecommitdiffstats
path: root/board/freescale/t208xrdb
diff options
context:
space:
mode:
authorShengzhou Liu <Shengzhou.Liu@freescale.com>2014-04-18 16:43:41 +0800
committerYork Sun <yorksun@freescale.com>2014-04-22 17:58:52 -0700
commitef531c73570794b7676b62de4224bd294919b83b (patch)
treebb21d9aed665fd694d1f6bac988fc68fa7f86c4a /board/freescale/t208xrdb
parent4d66668300439972abc4990f23fdea771f0830fd (diff)
downloadtalos-obmc-uboot-ef531c73570794b7676b62de4224bd294919b83b.tar.gz
talos-obmc-uboot-ef531c73570794b7676b62de4224bd294919b83b.zip
board/t2080rdb: some update for t2080rdb
- update readme. - add CONFIG_SYS_CORTINA_FW_IN_* for loading Cortina PHY CS4315 ucode from NOR/NAND/SPI/SD/REMOTE. - update cpld vbank with SW3[5:7]=000 as default vbank0 instead of previous SW3[5:7]=111 as default vbank. - fix CONFIG_SYS_I2C_EEPROM_ADDR_LEN to 2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'board/freescale/t208xrdb')
-rw-r--r--board/freescale/t208xrdb/README6
-rw-r--r--board/freescale/t208xrdb/cpld.h4
-rw-r--r--board/freescale/t208xrdb/t208xrdb.c2
3 files changed, 6 insertions, 6 deletions
diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index fe26de55c0..24484cd0ff 100644
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -67,7 +67,7 @@ T2080PCIe-RDB board Overview
- One PCIe x2 end-point device (C293 Crypto co-processor)
- IFC/Local Bus
- NOR: 128MB 16-bit NOR Flash
- - NAND: 512MB 8-bit NAND flash
+ - NAND: 1GB 8-bit NAND flash
- CPLD: for system controlling with programable header on-board
- SATA
- Two SATA 2.0 onnectors on-board
@@ -156,11 +156,11 @@ Software configurations and board settings
Switching between default bank and alternate bank on NOR flash
To change boot source to vbank4:
via software: run command 'cpld reset altbank' in u-boot.
- via DIP-switch: set SW3[5:7] = '011'
+ via DIP-switch: set SW3[5:7] = '100'
To change boot source to vbank0:
via software: run command 'cpld reset' in u-boot.
- via DIP-Switch: set SW3[5:7] = '111'
+ via DIP-Switch: set SW3[5:7] = '000'
2. NAND Boot:
a. build PBL image for NAND boot
diff --git a/board/freescale/t208xrdb/cpld.h b/board/freescale/t208xrdb/cpld.h
index 4cee4e55cf..3f1533888d 100644
--- a/board/freescale/t208xrdb/cpld.h
+++ b/board/freescale/t208xrdb/cpld.h
@@ -35,8 +35,8 @@ void cpld_write(unsigned int reg, u8 value);
#define CPLD_LBMAP_MASK 0x3F
#define CPLD_BANK_SEL_MASK 0x07
#define CPLD_BANK_OVERRIDE 0x40
-#define CPLD_LBMAP_ALTBANK 0x43 /* BANK OR | BANK 4 */
-#define CPLD_LBMAP_DFLTBANK 0x47 /* BANK OR | BANK 0 */
+#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */
+#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK 0 */
#define CPLD_LBMAP_RESET 0xFF
#define CPLD_LBMAP_SHIFT 0x03
#define CPLD_BOOT_SEL 0x80
diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c
index f3fec2aa6e..265c1f97dd 100644
--- a/board/freescale/t208xrdb/t208xrdb.c
+++ b/board/freescale/t208xrdb/t208xrdb.c
@@ -44,7 +44,7 @@ int checkboard(void)
puts("NAND\n");
} else {
reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
- printf("NOR vBank%d\n", ~reg & 0x7);
+ printf("NOR vBank%d\n", reg);
}
#endif
OpenPOWER on IntegriCloud