B4860QDS: SGMII related updates

- Enable SGMII support for 0x8d Serdes 2 protocol.
    - Correct Phy address for DTSECx for 0x8d/0xb2 Serdes 2 protocol.
    - Updated debug statement
    - Add Alternate LC VCO protocols(0x8d-->0x8c, 0xb2-->0xb1)
    - Rename onboard PHY address defines for more readability
    - Add these new Defines in B4860QDS.h file

Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

1 files changed, 38 insertions, 26 deletions

diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 12df9a8d9f..2726cd2d47 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -112,7 +112,10 @@ static void initialize_lane_to_slot(void)
 		 * Lanes: A,B,C,D: PCI
 		 * Lanes: E,F,G,H: XAUI2
 		 */
+	case 0xb1:
 	case 0xb2:
+	case 0x8c:
+	case 0x8d:
 		/*
 		 * Configuration:
 		 * SERDES: 2
@@ -195,34 +198,34 @@ int board_eth_init(bd_t *bis)
 	 * all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
 	 * 6 to on board SGMII phys
 	 */
-	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
-	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
+	fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 
 	switch (serdes1_prtcl) {
 	case 0x29:
 	case 0x2a:
 		/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
-		debug("Setting phy addresses for FM1_DTSEC5: %x and"
-			"FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
-			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		debug("Set phy addresses for FM1_DTSEC5:%x, FM1_DTSEC6:%x\n",
+		      CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+		      CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC5,
-				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+				CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6,
-				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+				CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 		break;
 #ifdef CONFIG_PPC_B4420
 	case 0x17:
 	case 0x18:
 		/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
-		debug("Setting phy addresses for FM1_DTSEC3: %x and"
-			"FM1_DTSEC4: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
-			CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+		debug("Set phy addresses for FM1_DTSEC3:%x, FM1_DTSEC4:%x\n",
+		      CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+		      CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 		/* Fixing Serdes clock by programming FPGA register */
 		QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
 		fm_info_set_phy_address(FM1_DTSEC3,
-				CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+				CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC4,
-				CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+				CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
 		break;
 #endif
 	default:
@@ -233,8 +236,8 @@ int board_eth_init(bd_t *bis)
 	switch (serdes2_prtcl) {
 	case 0x17:
 	case 0x18:
-		debug("Setting phy addresses on SGMII Riser card for"
-				"FM1_DTSEC ports: \n");
+		debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+		      CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC1,
 				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2,
@@ -246,8 +249,8 @@ int board_eth_init(bd_t *bis)
 		break;
 	case 0x48:
 	case 0x49:
-		debug("Setting phy addresses on SGMII Riser card for"
-				"FM1_DTSEC ports: \n");
+		debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+		      CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC1,
 				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC2,
@@ -255,10 +258,12 @@ int board_eth_init(bd_t *bis)
 		fm_info_set_phy_address(FM1_DTSEC3,
 				CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
 		break;
-	case 0x8d:
+	case 0xb1:
 	case 0xb2:
-		debug("Setting phy addresses on SGMII Riser card for"
-				"FM1_DTSEC ports: \n");
+	case 0x8c:
+	case 0x8d:
+		debug("Set phy addresses on SGMII Riser for FM1_DTSEC1:%x\n",
+		      CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC3,
 				CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC4,
@@ -266,18 +271,18 @@ int board_eth_init(bd_t *bis)
 		break;
 	case 0x98:
 		/* XAUI in Slot1 and Slot2 */
-		debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+		debug("Set phy address of AMC2PEX-2S for FM1_10GEC1:%x\n",
 		      CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
 		fm_info_set_phy_address(FM1_10GEC1,
 					CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
-		debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+		debug("Set phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
 		      CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 		fm_info_set_phy_address(FM1_10GEC2,
 					CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 		break;
 	case 0x9E:
 		/* XAUI in Slot2 */
-		debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+		debug("Sett phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
 		      CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
 		fm_info_set_phy_address(FM1_10GEC2,
 					CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
@@ -329,17 +334,20 @@ int board_eth_init(bd_t *bis)
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_XGMII:
 			fm_info_set_mdio(i,
-					 miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+					 miiphy_get_dev_by_name
+					 (DEFAULT_FM_TGEC_MDIO_NAME));
+			break;
+		case PHY_INTERFACE_MODE_NONE:
+			fm_info_set_phy_address(i, 0);
 			break;
 		default:
-			printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+			printf("Fman1: TGEC%u set to unknown interface %i\n",
 			       idx + 1, fm_info_get_enet_if(i));
 			fm_info_set_phy_address(i, 0);
 			break;
 		}
 	}
 
-
 	cpu_eth_init(bis);
 #endif
 
@@ -357,15 +365,19 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 
 		sprintf(alias, "phy_sgmii_%x", phy);
 		fdt_set_phy_handle(fdt, compat, addr, alias);
+		fdt_status_okay_by_alias(fdt, alias);
 	}
 }
 
+/*
+ * Set status to disabled for unused ethernet node
+ */
 void fdt_fixup_board_enet(void *fdt)
 {
 	int i;
 	char alias[32];
 
-	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+	for (i = FM1_DTSEC1; i <= FM1_10GEC2; i++) {
 		switch (fm_info_get_enet_if(i)) {
 		case PHY_INTERFACE_MODE_NONE:
 			sprintf(alias, "ethernet%u", i);