x86: Fix MMCR Access

Change sc520 MMCR Access to use memory accessor functions

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>

1 files changed, 43 insertions, 43 deletions

diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c
index 6d0b15a0fa..f794bebc25 100644
--- a/board/eNET/eNET.c
+++ b/board/eNET/eNET.c
@@ -46,7 +46,7 @@ unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
 void init_sc520_enet (void)
 {
 	/* Set CPU Speed to 100MHz */
-	sc520_mmcr->cpuctl = 0x01;
+	writeb(0x01, &sc520_mmcr->cpuctl);
 
 	/* wait at least one millisecond */
 	asm("movl	$0x2000,%%ecx\n"
@@ -55,7 +55,7 @@ void init_sc520_enet (void)
 	    "loop 0b\n": : : "ecx");
 
 	/* turn on the SDRAM write buffer */
-	sc520_mmcr->dbctl = 0x11;
+	writeb(0x11, &sc520_mmcr->dbctl);
 
 	/* turn on the cache and disable write through */
 	asm("movl	%%cr0, %%eax\n"
@@ -70,51 +70,51 @@ int board_early_init_f(void)
 {
 	init_sc520_enet();
 
-	sc520_mmcr->gpcsrt = 0x01;		/* GP Chip Select Recovery Time */
-	sc520_mmcr->gpcspw = 0x07;		/* GP Chip Select Pulse Width */
-	sc520_mmcr->gpcsoff = 0x00;		/* GP Chip Select Offset */
-	sc520_mmcr->gprdw = 0x05;		/* GP Read pulse width */
-	sc520_mmcr->gprdoff = 0x01;		/* GP Read offset */
-	sc520_mmcr->gpwrw = 0x05;		/* GP Write pulse width */
-	sc520_mmcr->gpwroff = 0x01;		/* GP Write offset */
-
-	sc520_mmcr->piodata15_0 = 0x0630;	/* PIO15_PIO0 Data */
-	sc520_mmcr->piodata31_16 = 0x2000;	/* PIO31_PIO16 Data */
-	sc520_mmcr->piodir31_16 = 0x2000;	/* GPIO Direction */
-	sc520_mmcr->piodir15_0 = 0x87b5;	/* GPIO Direction */
-	sc520_mmcr->piopfs31_16 = 0x0dfe;	/* GPIO pin function 31-16 reg */
-	sc520_mmcr->piopfs15_0 = 0x200a;	/* GPIO pin function 15-0 reg */
-	sc520_mmcr->cspfs = 0x00f8;		/* Chip Select Pin Function Select */
-
-	sc520_mmcr->par[2] = 0x200713f8;	/* Uart A (GPCS0, 0x013f8, 8 Bytes) */
-	sc520_mmcr->par[3] = 0x2c0712f8;	/* Uart B (GPCS3, 0x012f8, 8 Bytes) */
-	sc520_mmcr->par[4] = 0x300711f8;	/* Uart C (GPCS4, 0x011f8, 8 Bytes) */
-	sc520_mmcr->par[5] = 0x340710f8;	/* Uart D (GPCS5, 0x010f8, 8 Bytes) */
-	sc520_mmcr->par[6] =  0xe3ffc000;	/* SDRAM (0x00000000, 128MB) */
-	sc520_mmcr->par[7] = 0xaa3fd000;	/* StrataFlash (ROMCS1, 0x10000000, 16MB) */
-	sc520_mmcr->par[8] = 0xca3fd100;	/* StrataFlash (ROMCS2, 0x11000000, 16MB) */
-	sc520_mmcr->par[9] = 0x4203d900;	/* SRAM (GPCS0, 0x19000000, 1MB) */
-	sc520_mmcr->par[10] = 0x4e03d910;	/* SRAM (GPCS3, 0x19100000, 1MB) */
-	sc520_mmcr->par[11] = 0x50018100;	/* DP-RAM (GPCS4, 0x18100000, 4kB) */
-	sc520_mmcr->par[12] = 0x54020000;	/* CFLASH1 (0x200000000, 4kB) */
-	sc520_mmcr->par[13] = 0x5c020001;	/* CFLASH2 (0x200010000, 4kB) */
-/*	sc520_mmcr->par14 = 0x8bfff800; */	/* BOOTCS at  0x18000000 */
-/*	sc520_mmcr->par15 = 0x38201000; */	/* LEDs etc (GPCS6, 0x1000, 20 Bytes */
+	writeb(0x01, &sc520_mmcr->gpcsrt);		/* GP Chip Select Recovery Time */
+	writeb(0x07, &sc520_mmcr->gpcspw);		/* GP Chip Select Pulse Width */
+	writeb(0x00, &sc520_mmcr->gpcsoff);		/* GP Chip Select Offset */
+	writeb(0x05, &sc520_mmcr->gprdw);		/* GP Read pulse width */
+	writeb(0x01, &sc520_mmcr->gprdoff);		/* GP Read offset */
+	writeb(0x05, &sc520_mmcr->gpwrw);		/* GP Write pulse width */
+	writeb(0x01, &sc520_mmcr->gpwroff);		/* GP Write offset */
+
+	writew(0x0630, &sc520_mmcr->piodata15_0);	/* PIO15_PIO0 Data */
+	writew(0x2000, &sc520_mmcr->piodata31_16);	/* PIO31_PIO16 Data */
+	writew(0x2000, &sc520_mmcr->piodir31_16);	/* GPIO Direction */
+	writew(0x87b5, &sc520_mmcr->piodir15_0);	/* GPIO Direction */
+	writew(0x0dfe, &sc520_mmcr->piopfs31_16);	/* GPIO pin function 31-16 reg */
+	writew(0x200a, &sc520_mmcr->piopfs15_0);	/* GPIO pin function 15-0 reg */
+	writeb(0xf8, &sc520_mmcr->cspfs);		/* Chip Select Pin Function Select */
+
+	writel(0x200713f8, &sc520_mmcr->par[2]);	/* Uart A (GPCS0, 0x013f8, 8 Bytes) */
+	writel(0x2c0712f8, &sc520_mmcr->par[3]);	/* Uart B (GPCS3, 0x012f8, 8 Bytes) */
+	writel(0x300711f8, &sc520_mmcr->par[4]);	/* Uart C (GPCS4, 0x011f8, 8 Bytes) */
+	writel(0x340710f8, &sc520_mmcr->par[5]);	/* Uart D (GPCS5, 0x010f8, 8 Bytes) */
+	writel(0xe3ffc000, &sc520_mmcr->par[6]);	/* SDRAM (0x00000000, 128MB) */
+	writel(0xaa3fd000, &sc520_mmcr->par[7]);	/* StrataFlash (ROMCS1, 0x10000000, 16MB) */
+	writel(0xca3fd100, &sc520_mmcr->par[8]);	/* StrataFlash (ROMCS2, 0x11000000, 16MB) */
+	writel(0x4203d900, &sc520_mmcr->par[9]);	/* SRAM (GPCS0, 0x19000000, 1MB) */
+	writel(0x4e03d910, &sc520_mmcr->par[10]);	/* SRAM (GPCS3, 0x19100000, 1MB) */
+	writel(0x50018100, &sc520_mmcr->par[11]);	/* DP-RAM (GPCS4, 0x18100000, 4kB) */
+	writel(0x54020000, &sc520_mmcr->par[12]);	/* CFLASH1 (0x200000000, 4kB) */
+	writel(0x5c020001, &sc520_mmcr->par[13]);	/* CFLASH2 (0x200010000, 4kB) */
+/*	writel(0x8bfff800, &sc520_mmcr->par14); */	/* BOOTCS at  0x18000000 */
+/*	writel(0x38201000, &sc520_mmcr->par15); */	/* LEDs etc (GPCS6, 0x1000, 20 Bytes */
 
 	/* Disable Watchdog */
-	sc520_mmcr->wdtmrctl = 0x3333;
-	sc520_mmcr->wdtmrctl = 0xcccc;
-	sc520_mmcr->wdtmrctl = 0x0000;
+	writew(0x3333, &sc520_mmcr->wdtmrctl);
+	writew(0xcccc, &sc520_mmcr->wdtmrctl);
+	writew(0x0000, &sc520_mmcr->wdtmrctl);
 
 	/* Chip Select Configuration */
-	sc520_mmcr->bootcsctl = 0x0033;
-	sc520_mmcr->romcs1ctl = 0x0615;
-	sc520_mmcr->romcs2ctl = 0x0615;
-
-	sc520_mmcr->adddecctl = 0x02;
-	sc520_mmcr->uart1ctl = 0x07;
-	sc520_mmcr->sysarbctl = 0x06;
-	sc520_mmcr->sysarbmenb = 0x0003;
+	writew(0x0033, &sc520_mmcr->bootcsctl);
+	writew(0x0615, &sc520_mmcr->romcs1ctl);
+	writew(0x0615, &sc520_mmcr->romcs2ctl);
+
+	writeb(0x02, &sc520_mmcr->adddecctl);
+	writeb(0x07, &sc520_mmcr->uart1ctl);
+	writeb(0x06, &sc520_mmcr->sysarbctl);
+	writew(0x0003, &sc520_mmcr->sysarbmenb);
 
 	return 0;
 }