Cleanup of NAND support of delta board using the Monahans Data Flash

Controller.

1 files changed, 78 insertions, 202 deletions

diff --git a/board/delta/nand.c b/board/delta/nand.c
index 88e190268e..5876727f4e 100644
--- a/board/delta/nand.c
+++ b/board/delta/nand.c
@@ -28,17 +28,6 @@
 #include <nand.h>
 #include <asm/arch/pxa-regs.h>
 
-/* mk@tbd move this to pxa-regs */
-#define OSCR_CLK_FREQ 3.250 /* MHz */
-
-/* usefull */
-#define CFG_DFC_DEBUG1
-/* noisy */
-#undef CFG_DFC_DEBUG2
-/* wild west */
-#undef CFG_DFC_DEBUG3
-
-
 #ifdef CFG_DFC_DEBUG1
 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args)
 #else
@@ -57,6 +46,9 @@
 # define DFC_DEBUG3(fmt, args...)
 #endif
 
+#define MIN(x, y)		((x < y) ? x : y)
+
+/* These really don't belong here, as they are specific to the NAND Model */
 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
 
 static struct nand_bbt_descr delta_bbt_descr = {
@@ -77,13 +69,14 @@ static struct nand_oobinfo delta_oob = {
 /*
  * not required for Monahans DFC
  */
-static void delta_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
 {
 	return;
 }
 
+#if 0
 /* read device ready pin */
-static int delta_device_ready(struct mtd_info *mtdinfo)
+static int dfc_device_ready(struct mtd_info *mtdinfo)
 {
 	if(NDSR & NDSR_RDY)
 		return 1;
@@ -91,18 +84,19 @@ static int delta_device_ready(struct mtd_info *mtdinfo)
 		return 0;
 	return 0;
 }
+#endif
 
 /*
  * Write buf to the DFC Controller Data Buffer
  */
-static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 {
 	unsigned long bytes_multi = len & 0xfffffffc;
 	unsigned long rest = len & 0x3;
 	unsigned long *long_buf;
 	int i;
 	
-	DFC_DEBUG2("delta_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
+	DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf));
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
 			long_buf = (unsigned long*) &buf[i];
@@ -110,7 +104,7 @@ static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
 		}
 	}
 	if(rest) {
-		printf("delta_write_buf: ERROR, writing non 4-byte aligned data.\n");
+		printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n");
 	}
 	return;
 }
@@ -126,23 +120,23 @@ static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
  *
  * Solution: Don't use these with Mona's DFC and complain loudly.
  */
-static void delta_write_word(struct mtd_info *mtd, u16 word)
+static void dfc_write_word(struct mtd_info *mtd, u16 word)
 {
-	printf("delta_write_word: WARNING, this function does not work with the Monahans DFC!\n");
+	printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n");
 }
-static void delta_write_byte(struct mtd_info *mtd, u_char byte)
+static void dfc_write_byte(struct mtd_info *mtd, u_char byte)
 {
-	printf("delta_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
+	printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n");
 }
 
 /* The original:
- * static void delta_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
+ * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len)
  *
  * Shouldn't this be "u_char * const buf" ?
  */
-static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
+static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
 {
-	int i, j;
+	int i=0, j;
 
 	/* we have to be carefull not to overflow the buffer if len is
 	 * not a multiple of 4 */
@@ -150,7 +144,7 @@ static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
 	unsigned long rest = len & 0x3;
 	unsigned long *long_buf;
 
-	DFC_DEBUG3("delta_read_buf: reading %d bytes.\n", len);
+	DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len);
 	/* if there are any, first copy multiple of 4 bytes */
 	if(bytes_multi) {
 		for(i=0; i<bytes_multi; i+=4) {
@@ -172,23 +166,31 @@ static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len)
 /*
  * read a word. Not implemented as not used in NAND code.
  */
-static u16 delta_read_word(struct mtd_info *mtd)
+static u16 dfc_read_word(struct mtd_info *mtd)
 {
-	printf("delta_write_byte: UNIMPLEMENTED.\n");
+	printf("dfc_write_byte: UNIMPLEMENTED.\n");
+	return 0;
 }
 
 /* global var, too bad: mk@tbd: move to ->priv pointer */
 static unsigned long read_buf = 0;
 static int bytes_read = -1;
-static unsigned long last_cmd = 0;
 
-/* read a byte from NDDB Because we can only read 4 bytes from NDDB at
+/* 
+ * read a byte from NDDB Because we can only read 4 bytes from NDDB at
  * a time, we buffer the remaining bytes. The buffer is reset when a
  * new command is sent to the chip.
+ *
+ * WARNING:
+ * This function is currently only used to read status and id
+ * bytes. For these commands always 8 bytes need to be read from
+ * NDDB. So we read and discard these bytes right now. In case this
+ * function is used for anything else in the future, we must check
+ * what was the last command issued and read the appropriate amount of
+ * bytes respectively.
  */
-static u_char delta_read_byte(struct mtd_info *mtd)
+static u_char dfc_read_byte(struct mtd_info *mtd)
 {
-/* 	struct nand_chip *this = mtd->priv; */
 	unsigned char byte;
 	unsigned long dummy;
 
@@ -201,7 +203,7 @@ static u_char delta_read_byte(struct mtd_info *mtd)
 	if(bytes_read >= 4)
 		bytes_read = -1;
 
-	DFC_DEBUG2("delta_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
+	DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf);
 	return byte;
 }
 
@@ -227,14 +229,14 @@ static void wait_us(unsigned long us)
 	}
 }
 
-static void delta_clear_nddb()
+static void dfc_clear_nddb()
 {
 	NDCR &= ~NDCR_ND_RUN;
 	wait_us(CFG_NAND_OTHER_TO);
 }
 
 /* wait_event with timeout */
-static unsigned long delta_wait_event2(unsigned long event)
+static unsigned long dfc_wait_event(unsigned long event)
 {
 	unsigned long ndsr, timeout, start = OSCR;
 	
@@ -252,7 +254,7 @@ static unsigned long delta_wait_event2(unsigned long event)
 			break;
 		}
 		if(get_delta(start) > timeout) {
-			DFC_DEBUG1("delta_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
+			DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event);
 			return 0xff000000;
 		}
 		
@@ -260,25 +262,8 @@ static unsigned long delta_wait_event2(unsigned long event)
 	return ndsr;
 }
 
-
-#if DEADCODE
-/* poll the NAND Controller Status Register for event */
-static void delta_wait_event(unsigned long event)
-{
-	if(!event)
-		return;
-	
-	while(1) {
-		if(NDSR & event) {
-			NDSR |= event;
-			break;
-		}
-	}
-}
-#endif
-
 /* we don't always wan't to do this */
-static void delta_new_cmd()
+static void dfc_new_cmd()
 {
 	int retry = 0;
 	unsigned long status;
@@ -291,29 +276,20 @@ static void delta_new_cmd()
 		if(!(NDCR & NDCR_ND_RUN))
 			NDCR |= NDCR_ND_RUN;
 		
-		status = delta_wait_event2(NDSR_WRCMDREQ);
+		status = dfc_wait_event(NDSR_WRCMDREQ);
 		
 		if(status & NDSR_WRCMDREQ)
 			return;
 
-		DFC_DEBUG2("delta_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
-		delta_clear_nddb();
-	}
-	DFC_DEBUG1("delta_new_cmd: giving up after %d retries.\n", retry);
-		
-#if DEADCODE		
-	while(1) {
-		if(NDSR & NDSR_WRCMDREQ) {
-			NDSR |= NDSR_WRCMDREQ; /* Ack */
-			break;
-		}
+		DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry);
+		dfc_clear_nddb();
 	}
-#endif
-	
+	DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry);
 }
+
 /* this function is called after Programm and Erase Operations to
  * check for success or failure */
-static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
+static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 {
 	unsigned long ndsr=0, event=0;
 
@@ -328,7 +304,7 @@ static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 		event = NDSR_CS0_CMDD | NDSR_CS0_BBD;
 	}
 	
-	ndsr = delta_wait_event2(event);
+	ndsr = dfc_wait_event(event);
 
 	if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000))
 		return(0x1); /* Status Read error */
@@ -336,26 +312,20 @@ static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
 }
 
 /* cmdfunc send commands to the DFC */
-static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, 
-			  int column, int page_addr)
+static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command, 
+			int column, int page_addr)
 {
 	/* register struct nand_chip *this = mtd->priv; */
 	unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0;
-	unsigned long what_the_hack;
 
 	/* clear the ugly byte read buffer */
 	bytes_read = -1;
 	read_buf = 0;
-	last_cmd = 0;
-
-	/* if command is a double byte cmd, we set bit double cmd bit 19  */
-	/* 	command2 = (command>>8) & 0xFF;  */
-	/* 	ndcb0 = command | ((command2 ? 1 : 0) << 19); *\/ */
 
 	switch (command) {
 	case NAND_CMD_READ0:
-		DFC_DEBUG3("delta_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
-		delta_new_cmd();
+		DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		dfc_new_cmd();
 		ndcb0 = (NAND_CMD_READ0 | (4<<16));
 		column >>= 1; /* adjust for 16 bit bus */
 		ndcb1 = (((column>>1) & 0xff) |
@@ -365,35 +335,34 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
 		event = NDSR_RDDREQ;
 		goto write_cmd;
 	case NAND_CMD_READ1:
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n");
 		goto end;
 	case NAND_CMD_READOOB:
-		DFC_DEBUG1("delta_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
+		DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n");
 		goto end;
 	case NAND_CMD_READID:
-		last_cmd = NAND_CMD_READID;
-		delta_new_cmd();
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_READID.\n");
+		dfc_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n");
 		ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/
 		event = NDSR_RDDREQ;
 		goto write_cmd;
 	case NAND_CMD_PAGEPROG:
 		/* sent as a multicommand in NAND_CMD_SEQIN */
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n");
 		goto end;
 	case NAND_CMD_ERASE1:
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE1,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
-		delta_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		dfc_new_cmd();
 		ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16));
 		ndcb1 = (page_addr & 0x00ffffff);
 		goto write_cmd;
 	case NAND_CMD_ERASE2:
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n");
 		goto end;
 	case NAND_CMD_SEQIN:
 		/* send PAGE_PROG command(0x1080) */
-		delta_new_cmd();
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
+		dfc_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG,  page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1));
 		ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16));
 		column >>= 1; /* adjust for 16 bit bus */
 		ndcb1 = (((column>>1) & 0xff) |
@@ -402,72 +371,19 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
 			 ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */
 		event = NDSR_WRDREQ;
 		goto write_cmd;
-/* 	case NAND_CMD_SEQIN_pointer_operation: */
-
-/* 		/\* This is confusing because the command names are */
-/* 		 * different compared to the ones in the K9K12Q0C */
-/* 		 * datasheet. Infact this has nothing to do with */
-/* 		 * reading, as the but with page programming */
-/* 		 * (writing). */
-/* 		 * Here we send the multibyte commands */
-/* 		 * cmd1=0x00, cmd2=0x80 (for programming main area) or */
-/* 		 * cmd1=0x50, cmd2=0x80 (for spare area) */
-/* 		 * */
-/* 		 * When all data is written to the buffer, the page */
-/* 		 * program command (0x10) is sent to actually write */
-/* 		 * the data. */
-/* 		 *\/ */
-
-/* 		printf("delta_cmdfunc: NAND_CMD_SEQIN pointer op called.\n"); */
-
-/* 		ndcb0 = (NAND_CMD_SEQIN<<8) | (1<<21) | (1<<19) | (4<<16); */
-/* 		if(column >= mtd->oobblock) { */
-/* 			/\* OOB area *\/ */
-/* 			column -= mtd->oobblock; */
-/* 			ndcb0 |= NAND_CMD_READOOB; */
-/* 		} else if (column < 256) { */
-/* 			/\* First 256 bytes --> READ0 *\/ */
-/* 			ndcb0 |= NAND_CMD_READ0; */
-/* 		} else { */
-/* 			/\* Only for 8 bit devices - not delta!!! *\/ */
-/* 			column -= 256; */
-/* 			ndcb0 |= NAND_CMD_READ1; */
-/* 		} */
-/* 		event = NDSR_WRDREQ; */
-/* 		break; */
 	case NAND_CMD_STATUS:
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_STATUS.\n");
-		/* oh, this is not nice. for some reason the real
-		 * status byte is in the second read from the data
-		 * buffer. The hack is to read the first byte right
-		 * here, so the next read access by the nand code
-		 * yields the right one.
-		 */
-		delta_new_cmd();
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n");
+		dfc_new_cmd();
 		ndcb0 = NAND_CMD_STATUS | (4<<21);
 		event = NDSR_RDDREQ;
-#undef READ_STATUS_BUG
-#ifdef READ_STATUS_BUG
-		NDCB0 = ndcb0;
-		NDCB0 = ndcb1;
-		NDCB0 = ndcb2;
-		delta_wait_event2(event);
-		what_the_hack = NDDB;
-		if(what_the_hack != 0xffffffff) {
-			DFC_DEBUG2("what the hack.\n");
-			read_buf = what_the_hack;
-			bytes_read = 0;
-		}
-		goto end;
-#endif
 		goto write_cmd;
 	case NAND_CMD_RESET:
-		DFC_DEBUG2("delta_cmdfunc: NAND_CMD_RESET.\n");
+		DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n");
 		ndcb0 = NAND_CMD_RESET | (5<<21);
 		event = NDSR_CS0_CMDD;
 		goto write_cmd;
 	default:
-		printk("delta_cmdfunc: error, unsupported command.\n");
+		printk("dfc_cmdfunc: error, unsupported command.\n");
 		goto end;
 	}
 
@@ -476,13 +392,13 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command,
 	NDCB0 = ndcb1;
 	NDCB0 = ndcb2;
 
- wait_event:
-	delta_wait_event2(event);
+	/*  wait_event: */
+	dfc_wait_event(event);
  end:
 	return;
 }
 
-static void delta_dfc_gpio_init()
+static void dfc_gpio_init()
 {
 	DFC_DEBUG2("Setting up DFC GPIO's.\n");
 
@@ -542,51 +458,11 @@ void board_nand_init(struct nand_chip *nand)
 	unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR;
 
 	/* set up GPIO Control Registers */
-	delta_dfc_gpio_init();
+	dfc_gpio_init();
 
 	/* turn on the NAND Controller Clock (104 MHz @ D0) */
 	CKENA |= (CKENA_4_NAND | CKENA_9_SMC);
 
-	/* wait ? */
-/* 	printf("stupid loop start...\n"); */
-/* 	wait(200); */
-/* 	printf("stupid loop end.\n"); */
-		
-
-	/* NAND Timing Parameters (in ns) */
-#define NAND_TIMING_tCH 	10
-#define NAND_TIMING_tCS 	0
-#define NAND_TIMING_tWH		20
-#define NAND_TIMING_tWP 	40
-
-#define NAND_TIMING_tRH 	20
-#define NAND_TIMING_tRP 	40
-
-/* #define NAND_TIMING_tRH 	25 */
-/* #define NAND_TIMING_tRP 	50 */
-
-#define NAND_TIMING_tR  	11123
-/* #define NAND_TIMING_tWHR	110 */
-#define NAND_TIMING_tWHR	100
-#define NAND_TIMING_tAR		10
-
-/* Maximum values for NAND Interface Timing Registers in DFC clock
- * periods */
-#define DFC_MAX_tCH		7
-#define DFC_MAX_tCS		7
-#define DFC_MAX_tWH		7
-#define DFC_MAX_tWP		7
-#define DFC_MAX_tRH		7
-#define DFC_MAX_tRP		15
-#define DFC_MAX_tR		65535
-#define DFC_MAX_tWHR		15
-#define DFC_MAX_tAR		15
-
-#define DFC_CLOCK		104		/* DFC Clock is 104 MHz */
-#define DFC_CLK_PER_US		DFC_CLOCK/1000	/* clock period in ns */
-#define MIN(x, y)		((x < y) ? x : y)
-
-
 #undef CFG_TIMING_TIGHT
 #ifndef CFG_TIMING_TIGHT 
 	tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1), 
@@ -692,25 +568,25 @@ void board_nand_init(struct nand_chip *nand)
 	/* 	wait(10); */
 	
 	
-	nand->hwcontrol = delta_hwcontrol;
-/* 	nand->dev_ready = delta_device_ready; */
+	nand->hwcontrol = dfc_hwcontrol;
+/* 	nand->dev_ready = dfc_device_ready; */
 	nand->eccmode = NAND_ECC_SOFT;
 	nand->chip_delay = NAND_DELAY_US;
 	nand->options = NAND_BUSWIDTH_16;
-	nand->waitfunc = delta_wait;
-	nand->read_byte = delta_read_byte;
-	nand->write_byte = delta_write_byte;
-	nand->read_word = delta_read_word;
-	nand->write_word = delta_write_word;
-	nand->read_buf = delta_read_buf;
-	nand->write_buf = delta_write_buf;
-
-	nand->cmdfunc = delta_cmdfunc;
+	nand->waitfunc = dfc_wait;
+	nand->read_byte = dfc_read_byte;
+	nand->write_byte = dfc_write_byte;
+	nand->read_word = dfc_read_word;
+	nand->write_word = dfc_write_word;
+	nand->read_buf = dfc_read_buf;
+	nand->write_buf = dfc_write_buf;
+
+	nand->cmdfunc = dfc_cmdfunc;
 	nand->autooob = &delta_oob;
 	nand->badblock_pattern = &delta_bbt_descr;
 }
 
 #else
- #error "U-Boot legacy NAND support not available for delta board."
+ #error "U-Boot legacy NAND support not available for Monahans DFC."
 #endif
 #endif