Merge git://git.denx.de/u-boot into x1

Conflicts:

	drivers/usb/usb_ohci.c

1 files changed, 43 insertions, 43 deletions

diff --git a/board/cradle/lowlevel_init.S b/board/cradle/lowlevel_init.S
index 2fd307f1d0..6b5cfb922b 100644
--- a/board/cradle/lowlevel_init.S
+++ b/board/cradle/lowlevel_init.S
@@ -24,7 +24,7 @@
 #include <version.h>
 #include <asm/arch/pxa-regs.h>
 
-DRAM_SIZE:  .long   CFG_DRAM_SIZE
+DRAM_SIZE:  .long   CONFIG_SYS_DRAM_SIZE
 
 /* wait for coprocessor write complete */
    .macro CPWAIT reg
@@ -51,98 +51,98 @@ lowlevel_init:
     /* Set up GPIO pins first */
 
    ldr      r0,   =GPSR0
-   ldr      r1,   =CFG_GPSR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPSR1
-   ldr      r1,   =CFG_GPSR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPSR2
-   ldr      r1,   =CFG_GPSR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPSR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR0
-   ldr      r1,   =CFG_GPCR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR1
-   ldr      r1,   =CFG_GPCR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPCR2
-   ldr      r1,   =CFG_GPCR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPCR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER0
-   ldr      r1,   =CFG_GRER0_VAL
+   ldr      r1,   =CONFIG_SYS_GRER0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER1
-   ldr      r1,   =CFG_GRER1_VAL
+   ldr      r1,   =CONFIG_SYS_GRER1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GRER2
-   ldr      r1,   =CFG_GRER2_VAL
+   ldr      r1,   =CONFIG_SYS_GRER2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER0
-   ldr      r1,   =CFG_GFER0_VAL
+   ldr      r1,   =CONFIG_SYS_GFER0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER1
-   ldr      r1,   =CFG_GFER1_VAL
+   ldr      r1,   =CONFIG_SYS_GFER1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GFER2
-   ldr      r1,   =CFG_GFER2_VAL
+   ldr      r1,   =CONFIG_SYS_GFER2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR0
-   ldr      r1,   =CFG_GPDR0_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR0_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR1
-   ldr      r1,   =CFG_GPDR1_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR1_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GPDR2
-   ldr      r1,   =CFG_GPDR2_VAL
+   ldr      r1,   =CONFIG_SYS_GPDR2_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR0_L
-   ldr      r1,   =CFG_GAFR0_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR0_U
-   ldr      r1,   =CFG_GAFR0_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR0_U_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR1_L
-   ldr      r1,   =CFG_GAFR1_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR1_U
-   ldr      r1,   =CFG_GAFR1_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR1_U_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR2_L
-   ldr      r1,   =CFG_GAFR2_L_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_L_VAL
    str      r1,   [r0]
 
    ldr      r0,   =GAFR2_U
-   ldr      r1,   =CFG_GAFR2_U_VAL
+   ldr      r1,   =CONFIG_SYS_GAFR2_U_VAL
    str      r1,   [r0]
 
    /* enable GPIO pins */
    ldr      r0,   =PSSR
-   ldr      r1,   =CFG_PSSR_VAL
+   ldr      r1,   =CONFIG_SYS_PSSR_VAL
    str      r1,   [r0]
 
    SET_LED 1
 
    ldr    r3, =MSC1             /* low - bank 2 Lubbock Registers / SRAM */
-   ldr    r2, =CFG_MSC1_VAL     /* high - bank 3 Ethernet Controller */
+   ldr    r2, =CONFIG_SYS_MSC1_VAL     /* high - bank 3 Ethernet Controller */
    str    r2, [r3]              /* need to set MSC1 before trying to write to the HEX LEDs */
    ldr    r2, [r3]              /* need to read it back to make sure the value latches (see MSC section of manual) */
 
@@ -181,47 +181,47 @@ mem_init:
    @ Step 2a
    @ write msc0, read back to ensure data latches
    @
-   ldr     r2,   =CFG_MSC0_VAL
+   ldr     r2,   =CONFIG_SYS_MSC0_VAL
    str     r2,   [r1, #MSC0_OFFSET]
    ldr     r2,   [r1, #MSC0_OFFSET]
 
    @ write msc1
-   ldr     r2,  =CFG_MSC1_VAL
+   ldr     r2,  =CONFIG_SYS_MSC1_VAL
    str     r2,  [r1, #MSC1_OFFSET]
    ldr     r2,  [r1, #MSC1_OFFSET]
 
    @ write msc2
-   ldr     r2,  =CFG_MSC2_VAL
+   ldr     r2,  =CONFIG_SYS_MSC2_VAL
    str     r2,  [r1, #MSC2_OFFSET]
    ldr     r2,  [r1, #MSC2_OFFSET]
 
    @ Step 2b
    @ write mecr
-   ldr     r2,  =CFG_MECR_VAL
+   ldr     r2,  =CONFIG_SYS_MECR_VAL
    str     r2,  [r1, #MECR_OFFSET]
 
    @ write mcmem0
-   ldr     r2,  =CFG_MCMEM0_VAL
+   ldr     r2,  =CONFIG_SYS_MCMEM0_VAL
    str     r2,  [r1, #MCMEM0_OFFSET]
 
    @ write mcmem1
-   ldr     r2,  =CFG_MCMEM1_VAL
+   ldr     r2,  =CONFIG_SYS_MCMEM1_VAL
    str     r2,  [r1, #MCMEM1_OFFSET]
 
    @ write mcatt0
-   ldr     r2,  =CFG_MCATT0_VAL
+   ldr     r2,  =CONFIG_SYS_MCATT0_VAL
    str     r2,  [r1, #MCATT0_OFFSET]
 
    @ write mcatt1
-   ldr     r2,  =CFG_MCATT1_VAL
+   ldr     r2,  =CONFIG_SYS_MCATT1_VAL
    str     r2,  [r1, #MCATT1_OFFSET]
 
    @ write mcio0
-   ldr     r2,  =CFG_MCIO0_VAL
+   ldr     r2,  =CONFIG_SYS_MCIO0_VAL
    str     r2,  [r1, #MCIO0_OFFSET]
 
    @ write mcio1
-   ldr     r2,  =CFG_MCIO1_VAL
+   ldr     r2,  =CONFIG_SYS_MCIO1_VAL
    str     r2,  [r1, #MCIO1_OFFSET]
 
    /*SET_LED 3 */
@@ -229,14 +229,14 @@ mem_init:
    @ Step 2c
    @ fly-by-dma is defeatured on this part
    @ write flycnfg
-   @ldr     r2,  =CFG_FLYCNFG_VAL
+   @ldr     r2,  =CONFIG_SYS_FLYCNFG_VAL
    @str     r2,  [r1, #FLYCNFG_OFFSET]
 
 /* FIXME Does this sequence really make sense */
 #ifdef REDBOOT_WAY
    @ Step 2d
    @ get the mdrefr settings
-   ldr     r3,  =CFG_MDREFR_VAL
+   ldr     r3,  =CONFIG_SYS_MDREFR_VAL
 
    @ extract DRI field (we need a valid DRI field)
    @
@@ -319,7 +319,7 @@ mem_init:
 #else
    @ Step 2d
    @ get the mdrefr settings
-   ldr     r3,  =CFG_MDREFR_VAL
+   ldr     r3,  =CONFIG_SYS_MDREFR_VAL
 
    @ write back mdrefr
    @
@@ -363,7 +363,7 @@ mem_init:
    @ Step 4d
    @ fetch platform value of mdcnfg
    @
-   ldr     r2,  =CFG_MDCNFG_VAL
+   ldr     r2,  =CONFIG_SYS_MDCNFG_VAL
 
    @ disable all sdram banks
    @
@@ -400,7 +400,7 @@ mem_init:
    @ Access memory *not yet enabled* for CBR refresh cycles (8)
    @ - CBR is generated for all banks
 
-   ldr     r2, =CFG_DRAM_BASE
+   ldr     r2, =CONFIG_SYS_DRAM_BASE
    str     r2, [r2]
    str     r2, [r2]
    str     r2, [r2]
@@ -430,7 +430,7 @@ mem_init:
    @ Step 4h
    @ write mdmrs
    @
-   ldr     r2,  =CFG_MDMRS_VAL
+   ldr     r2,  =CONFIG_SYS_MDMRS_VAL
    str     r2,  [r1, #MDMRS_OFFSET]
 
    @ Done Memory Init
@@ -449,7 +449,7 @@ mem_init:
 
    @ Set interrupt mask register
    @
-   ldr     r1,  =CFG_ICMR_VAL
+   ldr     r1,  =CONFIG_SYS_ICMR_VAL
    ldr     r2,  =ICMR
    str     r1,  [r2]
 
@@ -465,7 +465,7 @@ mem_init:
 
    @ set core clocks
    @
-   ldr     r2,  =CFG_CCCR_VAL
+   ldr     r2,  =CONFIG_SYS_CCCR_VAL
    ldr     r1,  =CCCR
    str     r2,  [r1]
 
@@ -488,7 +488,7 @@ mem_init:
 	@ Turn on needed clocks
 	@
    ldr     r1,  =CKEN
-   ldr     r2,  =CFG_CKEN_VAL
+   ldr     r2,  =CONFIG_SYS_CKEN_VAL
    str     r2,  [r1]
 
    /*SET_LED 7 */