arm: atmel: Add SAMA5D2 Xplained board

The board supports following features:
 - Boot media support: SD card/e.MMC/SPI flash,
 - Support LCD display (optional, disabled by default),
 - Support ethernet,
 - Support USB mass storage.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
[fix checkpatch warnings]
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

4 files changed, 313 insertions, 0 deletions

diff --git a/board/atmel/sama5d2_xplained/Kconfig b/board/atmel/sama5d2_xplained/Kconfig
new file mode 100644
index 0000000000..55712e9745
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_SAMA5D2_XPLAINED
+
+config SYS_BOARD
+	default "sama5d2_xplained"
+
+config SYS_VENDOR
+	default "atmel"
+
+config SYS_SOC
+	default "at91"
+
+config SYS_CONFIG_NAME
+	default "sama5d2_xplained"
+
+endif
diff --git a/board/atmel/sama5d2_xplained/MAINTAINERS b/board/atmel/sama5d2_xplained/MAINTAINERS
new file mode 100644
index 0000000000..ff9c86f538
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/MAINTAINERS
@@ -0,0 +1,7 @@
+SAMA5D2 XPLAINED BOARD
+M:	Wenyou Yang <wenyou.yang@atmel.com>
+S:	Maintained
+F:	board/atmel/sama5d2_xplained/
+F:	include/configs/sama5d2_xplained.h
+F:	configs/sama5d2_xplained_mmc_defconfig
+F:	configs/sama5d2_xplained_spiflash_defconfig
diff --git a/board/atmel/sama5d2_xplained/Makefile b/board/atmel/sama5d2_xplained/Makefile
new file mode 100644
index 0000000000..420870b561
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2015 Atmel Corporation
+#		     Wenyou Yang <wenyou.yang@atmel.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += sama5d2_xplained.o
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
new file mode 100644
index 0000000000..0b3397fa09
--- /dev/null
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) 2015 Atmel Corporation
+ *		      Wenyou.Yang <wenyou.yang@atmel.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <atmel_hlcdc.h>
+#include <lcd.h>
+#include <mmc.h>
+#include <net.h>
+#include <netdev.h>
+#include <spi.h>
+#include <version.h>
+#include <asm/io.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/atmel_pio4.h>
+#include <asm/arch/atmel_usba_udc.h>
+#include <asm/arch/atmel_sdhci.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/sama5d2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs == 0;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 0);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
+}
+
+static void board_spi0_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 14, 0);
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 15, 0);
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 16, 0);
+
+	atmel_pio4_set_pio_output(AT91_PIO_PORTA, 17, 1);
+
+	at91_periph_clk_enable(ATMEL_ID_SPI0);
+}
+
+static void board_usb_hw_init(void)
+{
+	atmel_pio4_set_pio_output(AT91_PIO_PORTB, 10, 1);
+}
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	.vl_col = 480,
+	.vl_row = 272,
+	.vl_clk = 9000000,
+	.vl_bpix = LCD_BPP,
+	.vl_tft = 1,
+	.vl_hsync_len = 41,
+	.vl_left_margin = 2,
+	.vl_right_margin = 2,
+	.vl_vsync_len = 11,
+	.vl_upper_margin = 2,
+	.vl_lower_margin = 2,
+	.mmio = ATMEL_BASE_LCDC,
+};
+
+/* No power up/down pin for the LCD pannel */
+void lcd_enable(void)	{ /* Empty! */ }
+void lcd_disable(void)	{ /* Empty! */ }
+
+unsigned int has_lcdc(void)
+{
+	return 1;
+}
+
+static void board_lcd_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDPWM */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDISP */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDVSYNC */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 31, 0);	/* LCDHSYNC */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  0, 0);	/* LCDPCK */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD,  1, 0);	/* LCDDEN */
+
+	/* LCDDAT0 */
+	/* LCDDAT1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDDAT2 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDDAT3 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDDAT4 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDDAT5 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDDAT6 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDDAT7 */
+
+	/* LCDDAT8 */
+	/* LCDDAT9 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDDAT10 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDDAT11 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDDAT12 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDDAT13 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDDAT14 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDDAT15 */
+
+	/* LCDD16 */
+	/* LCDD17 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDDAT18 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDDAT19 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDAT20 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 25, 0);	/* LCDDAT21 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDDAT22 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDDAT23 */
+
+	at91_periph_clk_enable(ATMEL_ID_LCDC);
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+	ulong dram_size;
+	int i;
+	char temp[32];
+
+	lcd_printf("%s\n", U_BOOT_VERSION);
+	lcd_printf("2015 ATMEL Corp\n");
+	lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
+		   strmhz(temp, get_cpu_clk_rate()));
+
+	dram_size = 0;
+	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+		dram_size += gd->bd->bi_dram[i].size;
+
+	lcd_printf("%ld MB SDRAM\n", dram_size >> 20);
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+static void board_gmac_hw_init(void)
+{
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 14, 0);	/* GTXCK */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 15, 0);	/* GTXEN */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 16, 0);	/* GRXDV */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 17, 0);	/* GRXER */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 18, 0);	/* GRX0 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 19, 0);	/* GRX1 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 20, 0);	/* GTX0 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 21, 0);	/* GTX1 */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 22, 0);	/* GMDC */
+	atmel_pio4_set_f_periph(AT91_PIO_PORTB, 23, 0);	/* GMDIO */
+
+	at91_periph_clk_enable(ATMEL_ID_GMAC);
+}
+
+static void board_sdhci0_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 0, 0);	/* SDMMC0_CK */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* SDMMC0_CMD */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 2, 0);	/* SDMMC0_DAT0 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 3, 0);	/* SDMMC0_DAT1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 4, 0);	/* SDMMC0_DAT2 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 5, 0);	/* SDMMC0_DAT3 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 6, 0);	/* SDMMC0_DAT4 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 7, 0);	/* SDMMC0_DAT5 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 8, 0);	/* SDMMC0_DAT6 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 9, 0);	/* SDMMC0_DAT7 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 10, 0);	/* SDMMC0_RSTN */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SDMMC0_VDDSEL */
+
+	at91_periph_clk_enable(ATMEL_ID_SDMMC0);
+	at91_enable_periph_generated_clk(ATMEL_ID_SDMMC0,
+					 GCK_CSS_PLLA_CLK, 1);
+}
+
+static void board_sdhci1_hw_init(void)
+{
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 18, 0);	/* SDMMC1_DAT0 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 19, 0);	/* SDMMC1_DAT1 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 20, 0);	/* SDMMC1_DAT2 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 21, 0);	/* SDMMC1_DAT3 */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 22, 0);	/* SDMMC1_CK */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 27, 0);	/* SDMMC1_RSTN */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 28, 0);	/* SDMMC1_CMD */
+	atmel_pio4_set_e_periph(AT91_PIO_PORTA, 30, 0);	/* SDMMC1_CD */
+
+	at91_periph_clk_enable(ATMEL_ID_SDMMC1);
+	at91_enable_periph_generated_clk(ATMEL_ID_SDMMC1,
+					 GCK_CSS_PLLA_CLK, 1);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+#ifdef CONFIG_ATMEL_SDHCI0
+	atmel_sdhci_init((void *)ATMEL_BASE_SDMMC0, ATMEL_ID_SDMMC0);
+#endif
+#ifdef CONFIG_ATMEL_SDHCI1
+	atmel_sdhci_init((void *)ATMEL_BASE_SDMMC1, ATMEL_ID_SDMMC1);
+#endif
+
+	return 0;
+}
+
+static void board_uart1_hw_init(void)
+{
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD, 2, 1);	/* URXD1 */
+	atmel_pio4_set_a_periph(AT91_PIO_PORTD, 3, 0);	/* UTXD1 */
+
+	at91_periph_clk_enable(ATMEL_ID_UART1);
+}
+
+int board_early_init_f(void)
+{
+	at91_periph_clk_enable(ATMEL_ID_PIOA);
+	at91_periph_clk_enable(ATMEL_ID_PIOB);
+	at91_periph_clk_enable(ATMEL_ID_PIOC);
+	at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+	board_uart1_hw_init();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_ATMEL_SPI
+	board_spi0_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SDHCI
+#ifdef CONFIG_ATMEL_SDHCI0
+	board_sdhci0_hw_init();
+#endif
+#ifdef CONFIG_ATMEL_SDHCI1
+	board_sdhci1_hw_init();
+#endif
+#endif
+#ifdef CONFIG_MACB
+	board_gmac_hw_init();
+#endif
+#ifdef CONFIG_LCD
+	board_lcd_hw_init();
+#endif
+#ifdef CONFIG_CMD_USB
+	board_usb_hw_init();
+#endif
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	at91_udp_hw_init();
+#endif
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+				    CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
+#endif
+
+#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+	usba_udc_probe(&pdata);
+#ifdef CONFIG_USB_ETH_RNDIS
+	usb_eth_initialize(bis);
+#endif
+#endif
+
+	return rc;
+}