Tegra114: Add common CPU (shared) files

These files are used by both SPL and main U-Boot.

Signed-off-by: Tom Warren <twarren@nvidia.com>

6 files changed, 1291 insertions, 4 deletions

diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index aebe29e4b7..236cda8419 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -31,6 +31,7 @@
 #include <asm/arch-tegra/fuse.h>
 #include <asm/arch-tegra/pmc.h>
 #include <asm/arch-tegra/scu.h>
+#include <asm/arch-tegra/tegra.h>
 #include <asm/arch-tegra/warmboot.h>
 
 int tegra_get_chip_type(void)
@@ -42,7 +43,7 @@ int tegra_get_chip_type(void)
 	/*
 	 * This is undocumented, Chip ID is bits 15:8 of the register
 	 * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
-	 * Tegra30
+	 * Tegra30, and 0x35 for T114.
 	 */
 	gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
 	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
@@ -68,6 +69,12 @@ int tegra_get_chip_type(void)
 			return TEGRA_SOC_T30;
 		}
 		break;
+	case CHIPID_TEGRA114:
+		switch (tegra_sku_id) {
+		case SKU_ID_T114_ENG:
+			return TEGRA_SOC_T114;
+		}
+		break;
 	}
 	/* unknown sku id */
 	return TEGRA_SOC_UNKNOWN;
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index 15ac0c56f3..58ea6289d3 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -37,8 +37,10 @@ enum {
 	/* UARTs which we can enable */
 	UARTA	= 1 << 0,
 	UARTB	= 1 << 1,
+	UARTC	= 1 << 2,
 	UARTD	= 1 << 3,
-	UART_COUNT = 4,
+	UARTE	= 1 << 4,
+	UART_COUNT = 5,
 };
 
 /*
@@ -68,7 +70,7 @@ unsigned int query_sdram_size(void)
 	case 3:
 		return 0x40000000;	/* 1GB */
 	}
-#else	/* Tegra30 */
+#else	/* Tegra30/Tegra114 */
 	/* bits 31:28 in OdmData are used for RAM size on T30  */
 	switch ((reg) >> 28) {
 	case 0:
@@ -117,12 +119,18 @@ static int uart_configs[] = {
 	-1,
 	FUNCMUX_UART4_GMC,
 	-1,
-#else	/* Tegra30 */
+#elif defined(CONFIG_TEGRA30)
 	FUNCMUX_UART1_ULPI,	/* UARTA */
 	-1,
 	-1,
 	-1,
 	-1,
+#else	/* Tegra114 */
+	-1,
+	-1,
+	-1,
+	FUNCMUX_UART4_GMI,	/* UARTD */
+	-1,
 #endif
 };
 
@@ -138,6 +146,7 @@ static void setup_uarts(int uart_ids)
 		PERIPH_ID_UART2,
 		PERIPH_ID_UART3,
 		PERIPH_ID_UART4,
+		PERIPH_ID_UART5,
 	};
 	size_t i;
 
@@ -161,9 +170,15 @@ void board_init_uart_f(void)
 #ifdef CONFIG_TEGRA_ENABLE_UARTB
 	uart_ids |= UARTB;
 #endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTC
+	uart_ids |= UARTC;
+#endif
 #ifdef CONFIG_TEGRA_ENABLE_UARTD
 	uart_ids |= UARTD;
 #endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTE
+	uart_ids |= UARTE;
+#endif
 	setup_uarts(uart_ids);
 }
 
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/cpu/tegra114-common/Makefile
new file mode 100644
index 0000000000..5b53a71ba3
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC)-common.o
+
+COBJS-y	+= clock.o funcmux.o pinmux.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c
new file mode 100644
index 0000000000..9b29ce1dd2
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/clock.c
@@ -0,0 +1,655 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra114 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+	CLOCK_TYPE_AXPT,	/* PLL_A, PLL_X, PLL_P, CLK_M */
+	CLOCK_TYPE_MCPA,	/* and so on */
+	CLOCK_TYPE_MCPT,
+	CLOCK_TYPE_PCM,
+	CLOCK_TYPE_PCMT,
+	CLOCK_TYPE_PCMT16,
+	CLOCK_TYPE_PDCT,
+	CLOCK_TYPE_ACPT,
+	CLOCK_TYPE_ASPTE,
+	CLOCK_TYPE_PMDACD2T,
+	CLOCK_TYPE_PCST,
+
+	CLOCK_TYPE_COUNT,
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
+};
+
+enum {
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
+};
+
+enum {
+	MASK_BITS_31_30	= 2,	/* num of bits used to specify clock source */
+	MASK_BITS_31_29,
+	MASK_BITS_29_28,
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ *  The extra column in each clock source array is used to store the mask
+ *  bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_30},
+	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
+		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
+		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+		MASK_BITS_31_29},
+	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
+		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+		MASK_BITS_29_28}
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+	/* 0x00 */
+	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x08 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_I2C5,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+
+	/* 0x10 */
+	TYPE(PERIPHC_CVE,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
+
+	/* 0x18 */
+	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,	CLOCK_TYPE_PCMT),	/* MIPI base-band HSI */
+	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PCMT),
+
+	/* 0x20 */
+	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,	CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
+
+	/* 0x28 */
+	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PCMT),
+
+	/* 0x30 */
+	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S0,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+
+	/* 0x38h */  /* Jumps to reg offset 0x3B0h */
+	TYPE(PERIPHC_G3D2,      CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MSELECT,   CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_TSENSOR,   CLOCK_TYPE_PCST),	/* s/b PCTS */
+	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PCMT),
+
+	/* 0x40 */
+	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
+	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+	/* 0x48 */
+	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+	TYPE(PERIPHC_NANDSPEED,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
+	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPEEDO,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+
+	/* 0x50 */
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),	/* offset 0x420h */
+	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ *	uint vi_sensor;	 _VI_SENSOR_0,		0x1A8
+ *	SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+	/* Low word: 31:0 */
+	NONE(CPU),
+	NONE(COP),
+	NONE(TRIGSYS),
+	NONE(RESERVED3),
+	NONE(RTC),
+	NONE(TMR),
+	PERIPHC_UART1,
+	PERIPHC_UART2,	/* and vfir 0x68 */
+
+	/* 8 */
+	NONE(GPIO),
+	PERIPHC_SDMMC2,
+	NONE(SPDIF),		/* 0x08 and 0x0c, unclear which to use */
+	PERIPHC_I2S1,
+	PERIPHC_I2C1,
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC4,
+
+	/* 16 */
+	NONE(RESERVED16),
+	PERIPHC_PWM,
+	PERIPHC_I2S2,
+	PERIPHC_EPP,
+	PERIPHC_VI,
+	PERIPHC_G2D,
+	NONE(USBD),
+	NONE(ISP),
+
+	/* 24 */
+	PERIPHC_G3D,
+	NONE(RESERVED25),
+	PERIPHC_DISP2,
+	PERIPHC_DISP1,
+	PERIPHC_HOST1X,
+	NONE(VCP),
+	PERIPHC_I2S0,
+	NONE(CACHE2),
+
+	/* Middle word: 63:32 */
+	NONE(MEM),
+	NONE(AHBDMA),
+	NONE(APBDMA),
+	NONE(RESERVED35),
+	NONE(RESERVED36),
+	NONE(STAT_MON),
+	NONE(RESERVED38),
+	NONE(RESERVED39),
+
+	/* 40 */
+	NONE(KFUSE),
+	NONE(SBC1),	/* SBC1, 0x34, is this SPI1? */
+	PERIPHC_NOR,
+	NONE(RESERVED43),
+	PERIPHC_SBC2,
+	NONE(RESERVED45),
+	PERIPHC_SBC3,
+	PERIPHC_I2C5,
+
+	/* 48 */
+	NONE(DSI),
+	PERIPHC_TVO,	/* also CVE 0x40 */
+	PERIPHC_MIPI,
+	PERIPHC_HDMI,
+	NONE(CSI),
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_UART3,
+
+	/* 56 */
+	NONE(RESERVED56),
+	PERIPHC_EMC,
+	NONE(USB2),
+	NONE(USB3),
+	PERIPHC_MPE,
+	PERIPHC_VDE,
+	NONE(BSEA),
+	NONE(BSEV),
+
+	/* Upper word 95:64 */
+	PERIPHC_SPEEDO,
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_I2C3,
+	PERIPHC_SBC4,
+	PERIPHC_SDMMC3,
+	NONE(PCIE),
+	PERIPHC_OWR,
+
+	/* 72 */
+	NONE(AFI),
+	PERIPHC_CSITE,
+	NONE(PCIEXCLK),
+	NONE(AVPUCQ),
+	NONE(RESERVED76),
+	NONE(RESERVED77),
+	NONE(RESERVED78),
+	NONE(DTV),
+
+	/* 80 */
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	NONE(DSIB),
+	NONE(RESERVED83),
+	NONE(IRAMA),
+	NONE(IRAMB),
+	NONE(IRAMC),
+	NONE(IRAMD),
+
+	/* 88 */
+	NONE(CRAM2),
+	NONE(RESERVED89),
+	NONE(MDOUBLER),
+	NONE(RESERVED91),
+	NONE(SUSOUT),
+	NONE(RESERVED93),
+	NONE(RESERVED94),
+	NONE(RESERVED95),
+
+	/* V word: 31:0 */
+	NONE(CPUG),
+	NONE(CPULP),
+	PERIPHC_G3D2,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+
+	/* 08 */
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+	PERIPHC_AUDIO,
+	NONE(APBIF),
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+
+	/* 16 */
+	NONE(ATOMICS),
+	NONE(RESERVED17),
+	NONE(RESERVED18),
+	NONE(RESERVED19),
+	NONE(RESERVED20),
+	NONE(RESERVED21),
+	NONE(RESERVED22),
+	PERIPHC_ACTMON,
+
+	/* 24 */
+	NONE(RESERVED24),
+	NONE(RESERVED25),
+	NONE(RESERVED26),
+	NONE(RESERVED27),
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+	NONE(RESERVED30),
+	NONE(RESERVED31),
+
+	/* W word: 31:0 */
+	NONE(HDA2HDMICODEC),
+	NONE(RESERVED1_SATACOLD),
+	NONE(RESERVED2_PCIERX0),
+	NONE(RESERVED3_PCIERX1),
+	NONE(RESERVED4_PCIERX2),
+	NONE(RESERVED5_PCIERX3),
+	NONE(RESERVED6_PCIERX4),
+	NONE(RESERVED7_PCIERX5),
+
+	/* 40 */
+	NONE(CEC),
+	NONE(PCIE2_IOBIST),
+	NONE(EMC_IOBIST),
+	NONE(HDMI_IOBIST),
+	NONE(SATA_IOBIST),
+	NONE(MIPI_IOBIST),
+	NONE(EMC1_IOBIST),
+	NONE(XUSB),
+
+	/* 48 */
+	NONE(CILAB),
+	NONE(CILCD),
+	NONE(CILE),
+	NONE(DSIA_LP),
+	NONE(DSIB_LP),
+	NONE(RESERVED21_ENTROPY),
+	NONE(RESERVED22_W),
+	NONE(RESERVED23_W),
+
+	/* 56 */
+	NONE(RESERVED24_W),
+	NONE(AMX0),
+	NONE(ADX0),
+	NONE(DVFS),
+	NONE(XUSB_SS),
+	NONE(EMC_DLL),
+	NONE(MC1),
+	NONE(EMC1),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30/T114 support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+	struct clk_rst_ctlr *clkrst =
+			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 reg;
+
+	reg = readl(&clkrst->crc_osc_ctrl);
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+	if (reg & 1)				/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+	return reg >> 2;	/* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	enum periphc_internal_id internal_id;
+
+	/* Coresight is a special case */
+	if (periph_id == PERIPH_ID_CSI)
+		return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+	assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(internal_id != -1);
+	if (internal_id >= PERIPHC_VW_FIRST) {
+		internal_id -= PERIPHC_VW_FIRST;
+		return &clkrst->crc_clk_src_vw[internal_id];
+	} else
+		return &clkrst->crc_clk_src[internal_id];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id	peripheral to start
+ * @param source	PLL id of required parent clock
+ * @param mux_bits	Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+	enum clock_type_id type;
+	enum periphc_internal_id internal_id;
+	int mux;
+
+	assert(clock_periph_id_isvalid(periph_id));
+
+	internal_id = periph_id_to_internal_id[periph_id];
+	assert(periphc_internal_id_isvalid(internal_id));
+
+	type = clock_periph_type[internal_id];
+	assert(clock_type_id_isvalid(type));
+
+	*mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+	if (type == CLOCK_TYPE_PCMT16)
+		*divider_bits = 16;
+	else
+		*divider_bits = 8;
+
+	for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+		if (clock_source[type][mux] == parent)
+			return mux;
+
+	/* if we get here, either us or the caller has made a mistake */
+	printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+		parent);
+	return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *clk;
+	u32 reg;
+
+	/* Enable/disable the clock to this peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+		clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+	else
+		clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+	reg = readl(clk);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+	u32 *reset;
+	u32 reg;
+
+	/* Enable/disable reset to the peripheral */
+	assert(clock_periph_id_isvalid(periph_id));
+	if (periph_id < PERIPH_ID_VW_FIRST)
+		reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+	else
+		reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+	reg = readl(reset);
+	if (enable)
+		reg |= PERIPH_MASK(periph_id);
+	else
+		reg &= ~PERIPH_MASK(periph_id);
+	writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id    Clock ID according to tegra114 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+	if (clk_id > PERIPH_ID_COUNT)
+		return PERIPH_ID_NONE;
+
+	switch (clk_id) {
+	case PERIPH_ID_RESERVED3:
+	case PERIPH_ID_RESERVED16:
+	case PERIPH_ID_RESERVED24:
+	case PERIPH_ID_RESERVED35:
+	case PERIPH_ID_RESERVED43:
+	case PERIPH_ID_RESERVED45:
+	case PERIPH_ID_RESERVED56:
+	case PERIPH_ID_RESERVED76:
+	case PERIPH_ID_RESERVED77:
+	case PERIPH_ID_RESERVED78:
+	case PERIPH_ID_RESERVED83:
+	case PERIPH_ID_RESERVED89:
+	case PERIPH_ID_RESERVED91:
+	case PERIPH_ID_RESERVED93:
+	case PERIPH_ID_RESERVED94:
+	case PERIPH_ID_RESERVED95:
+		return PERIPH_ID_NONE;
+	default:
+		return clk_id;
+	}
+}
+#endif /* CONFIG_OF_CONTROL */
+
+void clock_early_init(void)
+{
+	struct clk_rst_ctlr *clkrst =
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+	/*
+	 * PLLP output frequency set to 408Mhz
+	 * PLLC output frequency set to 600Mhz
+	 * PLLD output frequency set to 925Mhz
+	 */
+	switch (clock_get_osc_freq()) {
+	case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+		break;
+
+	case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+		clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+		clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+		break;
+	case CLOCK_OSC_FREQ_19_2:
+	default:
+		/*
+		 * These are not supported. It is too early to print a
+		 * message and the UART likely won't work anyway due to the
+		 * oscillator being wrong.
+		 */
+		break;
+	}
+
+	/* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+	writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+	/* PLLC_MISC: Set LOCK_ENABLE */
+	writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc);
+	udelay(2);
+
+	/* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */
+	writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+	udelay(2);
+}
diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/cpu/tegra114-common/funcmux.c
new file mode 100644
index 0000000000..5af755034d
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/funcmux.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+	int bad_config = config != FUNCMUX_DEFAULT;
+
+	switch (id) {
+	case PERIPH_ID_UART4:
+		switch (config) {
+		case FUNCMUX_UART4_GMI:
+			pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD);
+			pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD);
+
+			pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT);
+			pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT);
+			pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT);
+			pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT);
+
+			pinmux_tristate_disable(PINGRP_GMI_A16);
+			pinmux_tristate_disable(PINGRP_GMI_A17);
+			pinmux_tristate_disable(PINGRP_GMI_A18);
+			pinmux_tristate_disable(PINGRP_GMI_A19);
+			break;
+		}
+		break;
+
+	/* Add other periph IDs here as needed */
+
+	default:
+		debug("%s: invalid periph_id %d", __func__, id);
+		return -1;
+	}
+
+	if (bad_config) {
+		debug("%s: invalid config %d for periph_id %d", __func__,
+		      config, id);
+		return -1;
+	}
+	return 0;
+}
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
new file mode 100644
index 0000000000..52b3ec47aa
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+	const char *name;
+	enum pmux_func funcs[4];
+	enum pmux_func func_safe;
+	enum pmux_vddio vddio;
+	enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT	0
+#define PMUX_PULL_SHIFT		2
+#define PMUX_TRISTATE_SHIFT	4
+#define PMUX_TRISTATE_MASK	(1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT		5
+#define PMUX_OD_SHIFT		6
+#define PMUX_LOCK_SHIFT		7
+#define PMUX_IO_RESET_SHIFT	8
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod)	\
+	{						\
+		.vddio = PMUX_VDDIO_ ## vdd,		\
+		.funcs = {				\
+			PMUX_FUNC_ ## f0,		\
+			PMUX_FUNC_ ## f1,		\
+			PMUX_FUNC_ ## f2,		\
+			PMUX_FUNC_ ## f3,		\
+		},					\
+		.func_safe = PMUX_FUNC_RSVD1,		\
+		.io = PMUX_PIN_ ## iod,			\
+	}
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+	PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+	/*	NAME	  VDD	   f0		f1	   f2	    f3  */
+	PINI(ULPI_DATA0,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA1,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA2,  BB,	   SPI3,       HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA3,  BB,	   SPI3,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA4,  BB,	   SPI2,	HSI,	   UARTA,   ULPI),
+	PINI(ULPI_DATA5,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_DATA6,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_DATA7,  BB,      SPI2,        HSI,       UARTA,   ULPI),
+	PINI(ULPI_CLK,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_DIR,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_NXT,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(ULPI_STP,    BB,      SPI1,       SPI5,       UARTD,   ULPI),
+	PINI(DAP3_FS,     BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_DIN,    BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_DOUT,   BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(DAP3_SCLK,   BB,      I2S2,       SPI5,       DISPA,   DISPB),
+	PINI(GPIO_PV0,    BB,      USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PV1,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC1_CLK,  SDMMC1,  SDMMC1,     CLK12,      RSVD3,   RSVD4),
+	PINI(SDMMC1_CMD,  SDMMC1,  SDMMC1,     SPDIF,      SPI4,    UARTA),
+	PINI(SDMMC1_DAT3, SDMMC1,  SDMMC1,     SPDIF,      SPI4,    UARTA),
+	PINI(SDMMC1_DAT2, SDMMC1,  SDMMC1,     PWM0,       SPI4,    UARTA),
+	PINI(SDMMC1_DAT1, SDMMC1,  SDMMC1,     PWM1,       SPI4,    UARTA),
+	PINI(SDMMC1_DAT0, SDMMC1,  SDMMC1,     RSVD2,      SPI4,    UARTA),
+	PINI(GPIO_PV2,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PV3,    BB,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK2_OUT,    SDMMC1,  EXTPERIPH2, RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK2_REQ,    SDMMC1,  DAP,        RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_PWR1,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_PWR2,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_SDIN,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_SDOUT,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_WR_N,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_CS0_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_DC0,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_SCK,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_PWR0,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_PCLK,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_DE,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D0,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D2,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D3,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D4,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D5,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D6,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D7,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D8,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D9,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D10,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D11,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D12,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D13,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D14,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D15,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D16,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D17,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D18,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D19,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D20,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D21,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D22,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_D23,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_CS1_N,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_M1,      LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINO(LCD_DC1,     LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(HDMI_INT,    LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DDC_SCL,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DDC_SDA,     LCD,     I2C4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(CRT_HSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(CRT_VSYNC,   LCD,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D0,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D1,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D2,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D3,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D4,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D5,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D6,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D7,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D8,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D9,       VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D10,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_D11,      VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_PCLK,     VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_MCLK,     VI,      RSVD1,      RSVD3,      RSVD3,   RSVD4),
+	PINI(VI_VSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(VI_HSYNC,    VI,      RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(UART2_RXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
+	PINI(UART2_TXD,   UART,    UARTB,      SPDIF,      UARTA,   SPI4),
+	PINI(UART2_RTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
+	PINI(UART2_CTS_N, UART,    UARTA,      UARTB,      RSVD3,   SPI4),
+	PINI(UART3_TXD,   UART,    UARTC,      RSVD2,      RSVD3,   SPI4),
+	PINI(UART3_RXD,   UART,    UARTC,      RSVD2,      RSVD3,   SPI4),
+	PINI(UART3_CTS_N, UART,    UARTC,      SDMMC1,     DTV,     SPI4),
+	PINI(UART3_RTS_N, UART,    UARTC,      PWM0,       DTV,     DISPA),
+	PINI(GPIO_PU0,    UART,    OWR,        UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU1,    UART,    RSVD1,      UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU2,    UART,    RSVD1,      UARTA,      RSVD3,   RSVD4),
+	PINI(GPIO_PU3,    UART,    PWM0,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU4,    UART,    PWM1,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU5,    UART,    PWM2,       UARTA,      DISPA,   DISPB),
+	PINI(GPIO_PU6,    UART,    PWM3,       UARTA,      USB,     DISPB),
+	PINI(GEN1_I2C_SDA, UART,   I2C1,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GEN1_I2C_SCL, UART,   I2C1,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP4_FS,     UART,    I2S3,       RSVD2,      DTV,     RSVD4),
+	PINI(DAP4_DIN,    UART,    I2S3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP4_DOUT,   UART,    I2S3,       RSVD2,      DTV,     RSVD4),
+	PINI(DAP4_SCLK,   UART,    I2S3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK3_OUT,    UART,    EXTPERIPH3, RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK3_REQ,    UART,    DEV3,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GMI_WP_N,    GMI,     RSVD1,      NAND,       GMI,     GMI_ALT),
+	PINI(GMI_IORDY,   GMI,     SDMMC2,     RSVD2,      GMI,     TRACE),
+	PINI(GMI_WAIT,    GMI,     SPI4,       NAND,       GMI,     DTV),
+	PINI(GMI_ADV_N,   GMI,     RSVD1,      NAND,       GMI,     TRACE),
+	PINI(GMI_CLK,     GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_CS0_N,   GMI,     RSVD1,      NAND,       GMI,     USB),
+	PINI(GMI_CS1_N,   GMI,     RSVD1,      NAND,       GMI,     SOC),
+	PINI(GMI_CS2_N,   GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_CS3_N,   GMI,     SDMMC2,     NAND,       GMI,     GMI_ALT),
+	PINI(GMI_CS4_N,   GMI,     USB,        NAND,       GMI,     TRACE),
+	PINI(GMI_CS6_N,   GMI,     NAND,       NAND_ALT,   GMI,     SPI4),
+	PINI(GMI_CS7_N,   GMI,     NAND,       NAND_ALT,   GMI,     SDMMC2),
+	PINI(GMI_AD0,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD1,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD2,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD3,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD4,     GMI,     RSVD1,      NAND,       GMI,     RSVD4),
+	PINI(GMI_AD5,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD6,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD7,     GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_AD8,     GMI,     PWM0,       NAND,       GMI,     DTV),
+	PINI(GMI_AD9,     GMI,     PWM1,       NAND,       GMI,     CLDVFS),
+	PINI(GMI_AD10,    GMI,     PWM2,       NAND,       GMI,     CLDVFS),
+	PINI(GMI_AD11,    GMI,     PWM3,       NAND,       GMI,     USB),
+	PINI(GMI_AD12,    GMI,     SDMMC2,     NAND,       GMI,     RSVD4),
+	PINI(GMI_AD13,    GMI,     SDMMC2,     NAND,       GMI,     RSVD4),
+	PINI(GMI_AD14,    GMI,     SDMMC2,     NAND,       GMI,     DTV),
+	PINI(GMI_AD15,    GMI,     SDMMC2,     NAND,       GMI,     DTV),
+	PINI(GMI_A16,     GMI,     UARTD,      TRACE,      GMI,     GMI_ALT),
+	PINI(GMI_A17,     GMI,     UARTD,      RSVD2,      GMI,     TRACE),
+	PINI(GMI_A18,     GMI,     UARTD,      RSVD2,      GMI,     TRACE),
+	PINI(GMI_A19,     GMI,     UARTD,      SPI4,       GMI,     TRACE),
+	PINI(GMI_WR_N,    GMI,     RSVD1,      NAND,       GMI,     SPI4),
+	PINI(GMI_OE_N,    GMI,     RSVD1,      NAND,       GMI,     SOC),
+	PINI(GMI_DQS,     GMI,     SDMMC2,     NAND,       GMI,     TRACE),
+	PINI(GMI_RST_N,   GMI,     NAND,       NAND_ALT,   GMI,     RSVD4),
+	PINI(GEN2_I2C_SCL, GMI,    I2C2,       RSVD2,      GMI,     RSVD4),
+	PINI(GEN2_I2C_SDA, GMI,    I2C2,       RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_CLK,  SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_CMD,  SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_DAT0, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT1, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT2, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT3, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT4, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT5, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT6, SDMMC4,  SDMMC4,     SPI3,       GMI,     RSVD4),
+	PINI(SDMMC4_DAT7, SDMMC4,  SDMMC4,     RSVD2,      GMI,     RSVD4),
+	PINI(SDMMC4_RST_N, SDMMC4, RSVD1,      RSVD2,      RSVD3,   SDMMC4),
+	PINI(CAM_MCLK,    CAM,     VI,         VI_ALT1,    VI_ALT2, RSVD4),
+	PINI(GPIO_PCC1,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PBB0,   CAM,     I2S4,       VI,         VI_ALT1, VI_ALT3),
+	PINI(CAM_I2C_SCL, CAM,     VGP1,       I2C3,       RSVD3,   RSVD4),
+	PINI(CAM_I2C_SDA, CAM,     VGP2,       I2C3,       RSVD3,   RSVD4),
+	PINI(GPIO_PBB3,   CAM,     VGP3,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB4,   CAM,     VGP4,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB5,   CAM,     VGP5,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB6,   CAM,     VGP6,       DISPA,      DISPB,   RSVD4),
+	PINI(GPIO_PBB7,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(GPIO_PCC2,   CAM,     I2S4,       RSVD2,      RSVD3,   RSVD4),
+	PINI(JTAG_RTCK,   SYS,     RTCK,       RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_I2C_SCL, SYS,     I2CPWR,     RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_I2C_SDA, SYS,     I2CPWR,     RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW0,     SYS,     KBC,        RSVD2,      DTV,     RSVD4),
+	PINI(KB_ROW1,     SYS,     KBC,        RSVD2,      DTV,     RSVD4),
+	PINI(KB_ROW2,     SYS,     KBC,        RSVD2,      DTV,     SOC),
+	PINI(KB_ROW3,     SYS,     KBC,        DISPA,      RSVD3,   DISPB),
+	PINI(KB_ROW4,     SYS,     KBC,        DISPA,      SPI2,    DISPB),
+	PINI(KB_ROW5,     SYS,     KBC,        DISPA,      SPI2,    DISPB),
+	PINI(KB_ROW6,     SYS,     KBC,        DISPA,      RSVD3,   DISPB),
+	PINI(KB_ROW7,     SYS,     KBC,        RSVD2,      CLDVFS,  UARTA),
+	PINI(KB_ROW8,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PINI(KB_ROW9,     SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PINI(KB_ROW10,    SYS,     KBC,        RSVD2,      RSVD3,   UARTA),
+	PINI(KB_ROW11,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW12,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW13,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW14,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_ROW15,    SYS,     RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(KB_COL0,     SYS,     KBC,        USB,        SPI2,    EMC_DLL),
+	PINI(KB_COL1,     SYS,     KBC,        RSVD2,      SPI2,    EMC_DLL),
+	PINI(KB_COL2,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(KB_COL3,     SYS,     KBC,        DISPA,      PWM2,    UARTA),
+	PINI(KB_COL4,     SYS,     KBC,        OWR,        SDMMC3,  UARTA),
+	PINI(KB_COL5,     SYS,     KBC,        RSVD2,      SDMMC1,  RSVD4),
+	PINI(KB_COL6,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(KB_COL7,     SYS,     KBC,        RSVD2,      SPI2,    RSVD4),
+	PINI(CLK_32K_OUT, SYS,     BLINK,      SOC,        RSVD3,   RSVD4),
+	PINI(SYS_CLK_REQ, SYS,     SYSCLK,     RSVD2,      RSVD3,   RSVD4),
+	PINI(CORE_PWR_REQ, SYS,    PWRON,      RSVD2,      RSVD3,   RSVD4),
+	PINI(CPU_PWR_REQ, SYS,     CPU,        RSVD2,      RSVD3,   RSVD4),
+	PINI(PWR_INT_N,   SYS,     PMI,        RSVD2,      RSVD3,   RSVD4),
+	PINI(CLK_32K_IN,  SYS,     CLK,        RSVD2,      RSVD3,   RSVD4),
+	PINI(OWR,         SYS,     OWR,        RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP1_FS,     AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_DIN,    AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_DOUT,   AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(DAP1_SCLK,   AUDIO,   I2S0,       HDA,        GMI,     RSVD4),
+	PINI(CLK1_REQ,    AUDIO,   DAP,        DAP1,       RSVD3,   RSVD4),
+	PINI(CLK1_OUT,    AUDIO,   EXTPERIPH1, DAP2,       RSVD3,   RSVD4),
+	PINI(SPDIF_IN,    AUDIO,   SPDIF,      USB,        RSVD3,   RSVD4),
+	PINI(SPDIF_OUT,   AUDIO,   SPDIF,      RSVD2,      RSVD3,   RSVD4),
+	PINI(DAP2_FS,     AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_DIN,    AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_DOUT,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(DAP2_SCLK,   AUDIO,   I2S1,       HDA,        RSVD3,   RSVD4),
+	PINI(SPI2_MOSI,   AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(SPI2_MISO,   AUDIO,   SPI6,       RSVD2,      RSVD3,   RSVD4),
+	PINI(SPI2_CS0_N,  AUDIO,   SPI6,       SPI1,       RSVD3,   RSVD4),
+	PINI(SPI2_SCK,    AUDIO,   SPI6,       CLDVFS,     RSVD3,   RSVD4),
+	PINI(SPI1_MOSI,   AUDIO,   RSVD1,      SPI1,       SPI2,    DAP2),
+	PINI(SPI1_SCK,    AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PINI(SPI1_CS0_N,  AUDIO,   SPI6,       SPI1,       SPI2,    RSVD4),
+	PINI(SPI1_MISO,   AUDIO,   RSVD1,      SPI1,       SPI2,    RSVD4),
+	PINI(SPI2_CS1_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SPI2_CS2_N,  AUDIO,   RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_CLK,  SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
+	PINI(SDMMC3_CMD,  SDMMC3,  SDMMC3,     PWM3,       UARTA,   SPI3),
+	PINI(SDMMC3_DAT0, SDMMC3,  SDMMC3,     RSVD2,      RSVD3,   SPI3),
+	PINI(SDMMC3_DAT1, SDMMC3,  SDMMC3,     PWM2,       UARTA,   SPI3),
+	PINI(SDMMC3_DAT2, SDMMC3,  SDMMC3,     PWM1,       DISPA,   SPI3),
+	PINI(SDMMC3_DAT3, SDMMC3,  SDMMC3,     PWM0,       DISPB,   SPI3),
+	PINI(SDMMC3_DAT4, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_DAT5, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_DAT6, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_DAT7, SDMMC3,  RSVD1,      RSVD2,      RSVD3,   RSVD4),
+	PINI(HDMI_CEC,    SYS,     CEC,        SDMMC3,     RSVD3,   SOC),
+	PINI(SDMMC1_WP_N, SDMMC1,  SDMMC1,     CLK12,      SPI4,    UARTA),
+	PINI(SDMMC3_CD_N, SDMMC3,  SDMMC3,     OWR,        RSVD3,   RSVD4),
+	PINI(SPI1_CS1_N,  AUDIO,   SPI6,       RSVD2,      SPI2,    I2C1),
+	PINI(SPI1_CS2_N,  AUDIO,   SPI6,       SPI1,       SPI2,    I2C1),
+	PINI(USB_VBUS_EN0, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(USB_VBUS_EN1, SYS,    USB,        RSVD2,      RSVD3,   RSVD4),
+	PINI(SDMMC3_CLK_LB_IN,  SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2,     RSVD3,   RSVD4),
+	PINO(NAND_GMI_CLK_LB,   GMI,    SDMMC2, NAND,      GMI,     RSVD4),
+	PINO(RESET_OUT_N, SYS,     RSVD1,      RSVD2,      RSVD3, RESET_OUT_N),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *tri = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin */
+	assert(pmux_pingrp_isvalid(pin));
+
+	reg = readl(tri);
+	if (enable)
+		reg |= PMUX_TRISTATE_MASK;
+	else
+		reg &= ~PMUX_TRISTATE_MASK;
+	writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+	pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pull = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and pupd */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_pupd_isvalid(pupd));
+
+	reg = readl(pull);
+	reg &= ~(0x3 << PMUX_PULL_SHIFT);
+	reg |= (pupd << PMUX_PULL_SHIFT);
+	writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *muxctl = &pmt->pmt_ctl[pin];
+	int i, mux = -1;
+	u32 reg;
+
+	/* Error check on pin and func */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_func_isvalid(func));
+
+	/* Handle special values */
+	if (func == PMUX_FUNC_SAFE)
+		func = tegra_soc_pingroups[pin].func_safe;
+
+	if (func & PMUX_FUNC_RSVD1) {
+		mux = func & 0x3;
+	} else {
+		/* Search for the appropriate function */
+		for (i = 0; i < 4; i++) {
+			if (tegra_soc_pingroups[pin].funcs[i] == func) {
+				mux = i;
+				break;
+			}
+		}
+	}
+	assert(mux != -1);
+
+	reg = readl(muxctl);
+	reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+	reg |= (mux << PMUX_MUXCTL_SHIFT);
+	writel(reg, muxctl);
+
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_io = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and io */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_io_isvalid(io));
+
+	reg = readl(pin_io);
+	reg &= ~(0x1 << PMUX_IO_SHIFT);
+	reg |= (io & 0x1) << PMUX_IO_SHIFT;
+	writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_lock = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and lock */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_lock_isvalid(lock));
+
+	if (lock == PMUX_PIN_LOCK_DEFAULT)
+		return 0;
+
+	reg = readl(pin_lock);
+	reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+	if (lock == PMUX_PIN_LOCK_ENABLE)
+		reg |= (0x1 << PMUX_LOCK_SHIFT);
+	else {
+		/* lock == DISABLE, which isn't possible */
+		printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+			__func__, lock);
+	}
+	writel(reg, pin_lock);
+
+	return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_od = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and od */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_od_isvalid(od));
+
+	if (od == PMUX_PIN_OD_DEFAULT)
+		return 0;
+
+	reg = readl(pin_od);
+	reg &= ~(0x1 << PMUX_OD_SHIFT);
+	if (od == PMUX_PIN_OD_ENABLE)
+		reg |= (0x1 << PMUX_OD_SHIFT);
+	writel(reg, pin_od);
+
+	return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+				enum pmux_pin_ioreset ioreset)
+{
+	struct pmux_tri_ctlr *pmt =
+			(struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+	u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+	u32 reg;
+
+	/* Error check on pin and ioreset */
+	assert(pmux_pingrp_isvalid(pin));
+	assert(pmux_pin_ioreset_isvalid(ioreset));
+
+	if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+		return 0;
+
+	reg = readl(pin_ioreset);
+	reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+	if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+		reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+	writel(reg, pin_ioreset);
+
+	return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+	enum pmux_pingrp pin = config->pingroup;
+
+	pinmux_set_func(pin, config->func);
+	pinmux_set_pullupdown(pin, config->pull);
+	pinmux_set_tristate(pin, config->tristate);
+	pinmux_set_io(pin, config->io);
+	pinmux_set_lock(pin, config->lock);
+	pinmux_set_od(pin, config->od);
+	pinmux_set_ioreset(pin, config->ioreset);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		pinmux_config_pingroup(&config[i]);
+}