Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'

14 files changed, 383 insertions, 9 deletions

diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 7626b5c1a3..816d0c5da7 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -14,6 +14,9 @@ void lowlevel_init(void)
 {
 }
 
+#define ZYNQ_SILICON_VER_MASK	0xF0000000
+#define ZYNQ_SILICON_VER_SHIFT	28
+
 int arch_cpu_init(void)
 {
 	zynq_slcr_unlock();
@@ -42,6 +45,16 @@ int arch_cpu_init(void)
 	return 0;
 }
 
+unsigned int zynq_get_silicon_version(void)
+{
+	unsigned int ver;
+
+	ver = (readl(&devcfg_base->mctrl) &
+	       ZYNQ_SILICON_VER_MASK) >> ZYNQ_SILICON_VER_SHIFT;
+
+	return ver;
+}
+
 void reset_cpu(ulong addr)
 {
 	zynq_slcr_cpu_reset();
diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c
index ba6a6aee5c..e0ed3bfb43 100644
--- a/arch/arm/cpu/armv7/zynq/ddrc.c
+++ b/arch/arm/cpu/armv7/zynq/ddrc.c
@@ -40,11 +40,8 @@ void zynq_ddrc_init(void)
 		 * first stage bootloader. To get ECC to work all memory has
 		 * been initialized by writing any value.
 		 */
-		memset(0, 0, 1 * 1024 * 1024);
+		memset((void *)0, 0, 1 * 1024 * 1024);
 	} else {
 		puts("Memory: ECC disabled\n");
 	}
-
-	if (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)
-		gd->ram_size /= 2;
 }
diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c
index d7c1882332..934ccc31c8 100644
--- a/arch/arm/cpu/armv7/zynq/slcr.c
+++ b/arch/arm/cpu/armv7/zynq/slcr.c
@@ -8,26 +8,75 @@
 #include <asm/io.h>
 #include <malloc.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/arch/clk.h>
 
 #define SLCR_LOCK_MAGIC		0x767B
 #define SLCR_UNLOCK_MAGIC	0xDF0D
 
+#define SLCR_USB_L1_SEL			0x04
+
 #define SLCR_IDCODE_MASK	0x1F000
 #define SLCR_IDCODE_SHIFT	12
 
+/*
+ * zynq_slcr_mio_get_status - Get the status of MIO peripheral.
+ *
+ * @peri_name: Name of the peripheral for checking MIO status
+ * @get_pins: Pointer to array of get pin for this peripheral
+ * @num_pins: Number of pins for this peripheral
+ * @mask: Mask value
+ * @check_val: Required check value to get the status of  periph
+ */
+struct zynq_slcr_mio_get_status {
+	const char *peri_name;
+	const int *get_pins;
+	int num_pins;
+	u32 mask;
+	u32 check_val;
+};
+
+static const int usb0_pins[] = {
+	28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39
+};
+
+static const int usb1_pins[] = {
+	40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51
+};
+
+static const struct zynq_slcr_mio_get_status mio_periphs[] = {
+	{
+		"usb0",
+		usb0_pins,
+		ARRAY_SIZE(usb0_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+	{
+		"usb1",
+		usb1_pins,
+		ARRAY_SIZE(usb1_pins),
+		SLCR_USB_L1_SEL,
+		SLCR_USB_L1_SEL,
+	},
+};
+
 static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */
 
 void zynq_slcr_lock(void)
 {
-	if (!slcr_lock)
+	if (!slcr_lock) {
 		writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock);
+		slcr_lock = 1;
+	}
 }
 
 void zynq_slcr_unlock(void)
 {
-	if (slcr_lock)
+	if (slcr_lock) {
 		writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock);
+		slcr_lock = 0;
+	}
 }
 
 /* Reset the entire system */
@@ -82,7 +131,7 @@ void zynq_slcr_devcfg_disable(void)
 {
 	zynq_slcr_unlock();
 
-	/* Disable AXI interface */
+	/* Disable AXI interface by asserting FPGA resets */
 	writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl);
 
 	/* Set Level Shifters DT618760 */
@@ -98,7 +147,7 @@ void zynq_slcr_devcfg_enable(void)
 	/* Set Level Shifters DT618760 */
 	writel(0xF, &slcr_base->lvl_shftr_en);
 
-	/* Disable AXI interface */
+	/* Enable AXI interface by de-asserting FPGA resets */
 	writel(0x0, &slcr_base->fpga_rst_ctrl);
 
 	zynq_slcr_lock();
@@ -115,3 +164,33 @@ u32 zynq_slcr_get_idcode(void)
 	return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >>
 							SLCR_IDCODE_SHIFT;
 }
+
+/*
+ * zynq_slcr_get_mio_pin_status - Get the MIO pin status of peripheral.
+ *
+ * @periph: Name of the peripheral
+ *
+ * Returns count to indicate the number of pins configured for the
+ * given @periph.
+ */
+int zynq_slcr_get_mio_pin_status(const char *periph)
+{
+	const struct zynq_slcr_mio_get_status *mio_ptr;
+	int val, i, j;
+	int mio = 0;
+
+	for (i = 0; i < ARRAY_SIZE(mio_periphs); i++) {
+		if (strcmp(periph, mio_periphs[i].peri_name) == 0) {
+			mio_ptr = &mio_periphs[i];
+			for (j = 0; j < mio_ptr->num_pins; j++) {
+				val = readl(&slcr_base->mio_pin
+						[mio_ptr->get_pins[j]]);
+				if ((val & mio_ptr->mask) == mio_ptr->check_val)
+					mio++;
+			}
+			break;
+		}
+	}
+
+	return mio;
+}
diff --git a/arch/arm/cpu/armv7/zynq/spl.c b/arch/arm/cpu/armv7/zynq/spl.c
index fcad762c03..d73e5cbaa7 100644
--- a/arch/arm/cpu/armv7/zynq/spl.c
+++ b/arch/arm/cpu/armv7/zynq/spl.c
@@ -28,6 +28,13 @@ void board_init_f(ulong dummy)
 	board_init_r(NULL, 0);
 }
 
+#ifdef CONFIG_SPL_BOARD_INIT
+void spl_board_init(void)
+{
+	board_init();
+}
+#endif
+
 u32 spl_boot_device(void)
 {
 	u32 mode;
@@ -67,3 +74,11 @@ int spl_start_uboot(void)
 	return 0;
 }
 #endif
+
+__weak void ps7_init(void)
+{
+	/*
+	 * This function is overridden by the one in
+	 * board/xilinx/zynq/ps7_init.c, if it exists.
+	 */
+}
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index f20b8bd604..2d076f194e 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -10,4 +10,198 @@
 
 / {
 	compatible = "xlnx,zynq-7000";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&clkc 3>;
+			clock-latency = <1000>;
+			operating-points = <
+				/* kHz    uV */
+				666667  1000000
+				333334  1000000
+				222223  1000000
+			>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <1>;
+			clocks = <&clkc 3>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <0 5 4>, <0 6 4>;
+		interrupt-parent = <&intc>;
+		reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
+	};
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		i2c0: zynq-i2c@e0004000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 38>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 25 4>;
+			reg = <0xe0004000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: zynq-i2c@e0005000 {
+			compatible = "cdns,i2c-r1p10";
+			status = "disabled";
+			clocks = <&clkc 39>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 48 4>;
+			reg = <0xe0005000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			arm,data-latency = <3 2 2>;
+			arm,tag-latency = <2 2 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		uart0: uart@e0000000 {
+			compatible = "xlnx,xuartps";
+			status = "disabled";
+			clocks = <&clkc 23>, <&clkc 40>;
+			clock-names = "ref_clk", "aper_clk";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+		};
+
+		uart1: uart@e0001000 {
+			compatible = "xlnx,xuartps";
+			status = "disabled";
+			clocks = <&clkc 24>, <&clkc 41>;
+			clock-names = "ref_clk", "aper_clk";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+		};
+
+		gem0: ethernet@e000b000 {
+			compatible = "cdns,gem";
+			reg = <0xe000b000 0x4000>;
+			status = "disabled";
+			interrupts = <0 22 4>;
+			clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+			clock-names = "pclk", "hclk", "tx_clk";
+		};
+
+		gem1: ethernet@e000c000 {
+			compatible = "cdns,gem";
+			reg = <0xe000c000 0x4000>;
+			status = "disabled";
+			interrupts = <0 45 4>;
+			clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
+			clock-names = "pclk", "hclk", "tx_clk";
+		};
+
+		sdhci0: ps7-sdhci@e0100000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 21>, <&clkc 32>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 24 4>;
+			reg = <0xe0100000 0x1000>;
+		} ;
+
+		sdhci1: ps7-sdhci@e0101000 {
+			compatible = "arasan,sdhci-8.9a";
+			status = "disabled";
+			clock-names = "clk_xin", "clk_ahb";
+			clocks = <&clkc 22>, <&clkc 33>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 47 4>;
+			reg = <0xe0101000 0x1000>;
+		} ;
+
+		slcr: slcr@f8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,zynq-slcr", "syscon";
+			reg = <0xF8000000 0x1000>;
+			ranges;
+			clkc: clkc@100 {
+				#clock-cells = <1>;
+				compatible = "xlnx,ps7-clkc";
+				ps-clk-frequency = <33333333>;
+				fclk-enable = <0>;
+				clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
+						"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
+						"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
+						"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
+						"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
+						"dma", "usb0_aper", "usb1_aper", "gem0_aper",
+						"gem1_aper", "sdio0_aper", "sdio1_aper",
+						"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
+						"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
+						"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
+						"dbg_trc", "dbg_apb";
+				reg = <0x100 0x100>;
+			};
+		};
+
+		global_timer: timer@f8f00200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xf8f00200 0x20>;
+			interrupts = <1 11 0x301>;
+			interrupt-parent = <&intc>;
+			clocks = <&clkc 4>;
+		};
+
+		ttc0: ttc0@f8001000 {
+			interrupt-parent = <&intc>;
+			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8001000 0x1000>;
+		};
+
+		ttc1: ttc1@f8002000 {
+			interrupt-parent = <&intc>;
+			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			compatible = "cdns,ttc";
+			clocks = <&clkc 6>;
+			reg = <0xF8002000 0x1000>;
+		};
+		scutimer: scutimer@f8f00600 {
+			interrupt-parent = <&intc>;
+			interrupts = < 1 13 0x301 >;
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = < 0xf8f00600 0x20 >;
+			clocks = <&clkc 4>;
+		} ;
+	};
 };
diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts
index 6da71c116d..c373a2cc31 100644
--- a/arch/arm/dts/zynq-microzed.dts
+++ b/arch/arm/dts/zynq-microzed.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq MicroZED Board";
 	compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts
index 667dc28256..4fa0b00b31 100644
--- a/arch/arm/dts/zynq-zc702.dts
+++ b/arch/arm/dts/zynq-zc702.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZC702 Board";
 	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts
index 526fc8888b..2a80195757 100644
--- a/arch/arm/dts/zynq-zc706.dts
+++ b/arch/arm/dts/zynq-zc706.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZC706 Board";
 	compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts
index 8b542a109b..5e66174977 100644
--- a/arch/arm/dts/zynq-zc770-xm010.dts
+++ b/arch/arm/dts/zynq-zc770-xm010.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZC770 XM010 Board";
 	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts
index 0379a07068..127a6619c6 100644
--- a/arch/arm/dts/zynq-zc770-xm012.dts
+++ b/arch/arm/dts/zynq-zc770-xm012.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZC770 XM012 Board";
 	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts
index a4f9e05fc0..c61c7e7592 100644
--- a/arch/arm/dts/zynq-zc770-xm013.dts
+++ b/arch/arm/dts/zynq-zc770-xm013.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZC770 XM013 Board";
 	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
 };
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
index 91a5deba4a..70cc8a6c0d 100644
--- a/arch/arm/dts/zynq-zed.dts
+++ b/arch/arm/dts/zynq-zed.dts
@@ -11,4 +11,13 @@
 / {
 	model = "Zynq ZED Board";
 	compatible = "xlnx,zynq-zed", "xlnx,zynq-7000";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
 };
diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h
index 39184da40e..2aede0c552 100644
--- a/arch/arm/include/asm/arch-zynq/hardware.h
+++ b/arch/arm/include/asm/arch-zynq/hardware.h
@@ -22,9 +22,12 @@
 #define ZYNQ_SPI_BASEADDR0		0xE0006000
 #define ZYNQ_SPI_BASEADDR1		0xE0007000
 #define ZYNQ_DDRC_BASEADDR		0xF8006000
+#define ZYNQ_EFUSE_BASEADDR		0xF800D000
+#define ZYNQ_USB_BASEADDR0		0xE0002000
+#define ZYNQ_USB_BASEADDR1		0xE0003000
 
 /* Bootmode setting values */
-#define ZYNQ_BM_MASK		0xF
+#define ZYNQ_BM_MASK		0x7
 #define ZYNQ_BM_NOR		0x2
 #define ZYNQ_BM_SD		0x5
 #define ZYNQ_BM_JTAG		0x0
@@ -130,4 +133,12 @@ struct ddrc_regs {
 };
 #define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR)
 
+struct efuse_reg {
+	u32 reserved1[4];
+	u32 status;
+	u32 reserved2[3];
+};
+
+#define efuse_base ((struct efuse_reg *)ZYNQ_EFUSE_BASEADDR)
+
 #endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h
index a68e1b3d23..53c30ec6cf 100644
--- a/arch/arm/include/asm/arch-zynq/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynq/sys_proto.h
@@ -15,7 +15,9 @@ extern void zynq_slcr_devcfg_disable(void);
 extern void zynq_slcr_devcfg_enable(void);
 extern u32 zynq_slcr_get_boot_mode(void);
 extern u32 zynq_slcr_get_idcode(void);
+extern int zynq_slcr_get_mio_pin_status(const char *periph);
 extern void zynq_ddrc_init(void);
+extern unsigned int zynq_get_silicon_version(void);
 
 /* Driver extern functions */
 extern int zynq_sdhci_init(u32 regbase);