Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

32 files changed, 783 insertions, 88 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 97056859d0..408e4ff144 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -589,36 +589,46 @@ config TARGET_VEXPRESS64_JUNO
 	bool "Support Versatile Express Juno Development Platform"
 	select ARM64
 
-config TARGET_LS2085A_EMU
-	bool "Support ls2085a_emu"
+config TARGET_LS2080A_EMU
+	bool "Support ls2080a_emu"
 	select ARM64
 	select ARMV8_MULTIENTRY
+	help
+	  Support for Freescale LS2080A_EMU platform
+	  The LS2080A Development System (EMULATOR) is a pre silicon
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
 
-config TARGET_LS2085A_SIMU
-	bool "Support ls2085a_simu"
+config TARGET_LS2080A_SIMU
+	bool "Support ls2080a_simu"
 	select ARM64
 	select ARMV8_MULTIENTRY
+	help
+	  Support for Freescale LS2080A_SIMU platform
+	  The LS2080A Development System (QDS) is a pre silicon
+	  development platform that supports the QorIQ LS2080A
+	  Layerscape Architecture processor.
 
-config TARGET_LS2085AQDS
-	bool "Support ls2085aqds"
+config TARGET_LS2080AQDS
+	bool "Support ls2080aqds"
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select SUPPORT_SPL
 	help
-	  Support for Freescale LS2085AQDS platform
-	  The LS2085A Development System (QDS) is a high-performance
-	  development platform that supports the QorIQ LS2085A
+	  Support for Freescale LS2080AQDS platform
+	  The LS2080A Development System (QDS) is a high-performance
+	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
-config TARGET_LS2085ARDB
-	bool "Support ls2085ardb"
+config TARGET_LS2080ARDB
+	bool "Support ls2080ardb"
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select SUPPORT_SPL
 	help
-	  Support for Freescale LS2085ARDB platform.
-	  The LS2085A Reference design board (RDB) is a high-performance
-	  development platform that supports the QorIQ LS2085A
+	  Support for Freescale LS2080ARDB platform.
+	  The LS2080A Reference design board (RDB) is a high-performance
+	  development platform that supports the QorIQ LS2080A
 	  Layerscape Architecture processor.
 
 config TARGET_HIKEY
@@ -640,6 +650,14 @@ config TARGET_LS1021ATWR
 	select CPU_V7
 	select SUPPORT_SPL
 
+config TARGET_LS1043AQDS
+	bool "Support ls1043aqds"
+	select ARM64
+	select ARMV8_MULTIENTRY
+	select SUPPORT_SPL
+	help
+	  Support for Freescale LS1043AQDS platform.
+
 config TARGET_LS1043ARDB
 	bool "Support ls1043ardb"
 	select ARM64
@@ -759,10 +777,11 @@ source "board/compulab/cm_t43/Kconfig"
 source "board/creative/xfi3/Kconfig"
 source "board/denx/m28evk/Kconfig"
 source "board/denx/m53evk/Kconfig"
-source "board/freescale/ls2085a/Kconfig"
-source "board/freescale/ls2085aqds/Kconfig"
-source "board/freescale/ls2085ardb/Kconfig"
+source "board/freescale/ls2080a/Kconfig"
+source "board/freescale/ls2080aqds/Kconfig"
+source "board/freescale/ls2080ardb/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
+source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
 source "board/freescale/ls1043ardb/Kconfig"
 source "board/freescale/mx23evk/Kconfig"
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index df2e1b76f1..2215fe93cf 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -372,3 +372,13 @@ void reset_cpu(ulong addr)
 		 */
 	}
 }
+
+void arch_preboot_os(void)
+{
+	unsigned long ctrl;
+
+	/* Disable PL1 Physical Timer */
+	asm("mrc p15, 0, %0, c14, c2, 1" : "=r" (ctrl));
+	ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+	asm("mcr p15, 0, %0, c14, c2, 1" : : "r" (ctrl));
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
index 11b17b2c74..e6a32caafc 100644
--- a/arch/arm/cpu/armv7/ls102xa/timer.c
+++ b/arch/arm/cpu/armv7/ls102xa/timer.c
@@ -56,7 +56,8 @@ static inline unsigned long long us_to_tick(unsigned long long usec)
 int timer_init(void)
 {
 	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
-	unsigned long ctrl, val, freq;
+	unsigned long ctrl, freq;
+	unsigned long long val;
 
 	/* Enable System Counter */
 	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 1ece6a2c12..53bac3b449 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -13,13 +13,13 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 inline void set_pgtable_section(u64 *page_table, u64 index, u64 section,
-			 u64 memory_type, u64 share)
+			 u64 memory_type, u64 attribute)
 {
 	u64 value;
 
 	value = section | PMD_TYPE_SECT | PMD_SECT_AF;
 	value |= PMD_ATTRINDX(memory_type);
-	value |= share;
+	value |= attribute;
 	page_table[index] = value;
 }
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 6fa08c8f3c..cce74052f7 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -21,10 +21,14 @@ obj-$(CONFIG_SYS_HAS_SERDES) += fsl_lsch2_serdes.o
 endif
 endif
 
+ifneq ($(CONFIG_LS2080A),)
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
+endif
+
 ifneq ($(CONFIG_LS2085A),)
-obj-$(CONFIG_SYS_HAS_SERDES) += ls2085a_serdes.o
-else
+obj-$(CONFIG_SYS_HAS_SERDES) += ls2080a_serdes.o
+endif
+
 ifneq ($(CONFIG_LS1043A),)
 obj-$(CONFIG_SYS_HAS_SERDES) += ls1043a_serdes.o
 endif
-endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
index 03e18f6573..f9323c1d28 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
+++ b/arch/arm/cpu/armv8/fsl-layerscape/README.lsch3
@@ -7,7 +7,7 @@
 Freescale LayerScape with Chassis Generation 3
 
 This architecture supports Freescale ARMv8 SoCs with Chassis generation 3,
-for example LS2085A.
+for example LS2080A.
 
 DDR Layout
 ============
@@ -152,7 +152,7 @@ u-boot command
 nand write <rcw image in memory> 0 <size of rcw image>
 
 To form the NAND image, build u-boot with NAND config, for example,
-ls2085aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
+ls2080aqds_nand_defconfig. The image needed is u-boot-with-spl.bin.
 The u-boot image should be written to match SRC_ADDR, in above example 0x20000.
 
 nand write <u-boot image in memory> 200000 <size of u-boot image>
@@ -242,3 +242,84 @@ MMU Translation Tables
                           | 0x81_0000_0000 |        | 0x08_0080_0000 |
                           ------------------        ------------------
 			         ...	                   ...
+
+
+DPAA2 commands to manage Management Complex (MC)
+------------------------------------------------
+DPAA2 commands has been introduced to manage Management Complex
+(MC). These commands are used to start mc, aiop and apply DPL
+from u-boot command prompt.
+
+Please note Management complex Firmware(MC), DPL and DPC are no
+more deployed during u-boot boot-sequence.
+
+Commands:
+a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+c) fsl_mc start aiop <FW_addr> - Start AIOP
+
+How to use commands :-
+1. Command sequence for u-boot ethernet:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) DPMAC net-devices are now available for use
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> ping $serverip
+
+2. Command sequence for Linux boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   c) No DPMAC net-devices are available for use in u-boot
+   d) boot Linux
+
+   Example-
+	Assumption: MC firmware, DPL and DPC dtb is already programmed
+	on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> setenv ethact DPMAC1@xgmii
+	=> tftp a0000000 kernel.itb
+	=> fsl_mc apply dpl 580700000
+	=> bootm a0000000
+
+3. Command sequence for AIOP boot:
+   a) fsl_mc start mc <FW_addr> <DPC_addr> - Start Management Complex
+   b) fsl_mc start aiop <FW_addr> - Start AIOP
+   c) fsl_mc apply DPL <DPL_addr> - Apply DPL file
+   d) No DPMAC net-devices are availabe for use in u-boot
+  Please note actual AIOP start will happen during DPL parsing of
+  Management complex
+
+  Example-
+	Assumption: MC firmware, DPL, DPC dtb and AIOP firmware is already
+	programmed on NOR flash.
+
+	=> fsl_mc start mc 580300000 580800000
+	=> fsl_mc start aiop 0x580900000
+	=> setenv ethact DPMAC1@xgmii
+	=> fsl_mc apply dpl 580700000
+
+Errata A009635
+---------------
+If the core runs at higher than x3 speed of the platform, there is
+possiblity about sev instruction to getting missed by other cores.
+This is because of SoC Run Control block may not able to sample
+the EVENTI(Sev) signals.
+
+Workaround: Configure Run Control and EPU to periodically send out EVENTI signals to
+wake up A57 cores
+
+Errata workaround uses Env variable "a009635_interval_val". It uses decimal
+value.
+- Default value of env variable is platform clock (MHz)
+
+- User can modify default value by updating the env variable
+  setenv a009635_interval_val 600; saveenv;
+  It configure platform clock as 600 MHz
+
+- Env variable as 0 signifies no workaround
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 0cb0afa0b3..8847fc0287 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -76,7 +76,7 @@ static int set_block_entry(const struct sys_mmu_table *list,
 				    index,
 				    block_addr,
 				    list->memory_type,
-				    list->share);
+				    list->attribute);
 		block_addr += block_size;
 		index++;
 	}
@@ -438,7 +438,7 @@ int print_cpuinfo(void)
 #ifdef CONFIG_SYS_DPAA_FMAN
 	printf("  FMAN:     %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
 #endif
-#ifdef CONFIG_FSL_LSCH3
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	printf("     DP-DDR:   %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus2));
 #endif
 	puts("\n");
@@ -484,7 +484,13 @@ int arch_early_init_r(void)
 {
 #ifdef CONFIG_MP
 	int rv = 1;
+#endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+	erratum_a009635();
+#endif
+
+#ifdef CONFIG_MP
 	rv = fsl_layerscape_wake_seconday_cores();
 	if (rv)
 		printf("Did not wake secondary cores\n");
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
index 47599c1217..eafdd71a84 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fdt.c
@@ -141,7 +141,7 @@ void append_mmu_masters(void *blob, const char *smmu_path,
 
 /*
  * The info below summarizes how streamID partitioning works
- * for ls2085a and how it is conveyed to the OS via the device tree.
+ * for ls2080a and how it is conveyed to the OS via the device tree.
  *
  *  -non-PCI legacy, platform devices (USB, SD/MMC, SATA, DMA)
  *     -all legacy devices get a unique ICID assigned and programmed in
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 2ab8da6403..918e889052 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -18,6 +18,11 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
 static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
 #endif
 
+#ifdef CONFIG_FSL_MC_ENET
+int xfi_dpmac[XFI8 + 1];
+int sgmii_dpmac[SGMII16 + 1];
+#endif
+
 int is_serdes_configured(enum srds_prtcl device)
 {
 	int ret = 0;
@@ -116,9 +121,15 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 				wriop_init_dpmac(sd, 12, (int)lane_prtcl);
 				break;
 			default:
+				if (lane_prtcl >= XFI1 && lane_prtcl <= XFI8)
+					wriop_init_dpmac(sd,
+							 xfi_dpmac[lane_prtcl],
+							 (int)lane_prtcl);
+
 				 if (lane_prtcl >= SGMII1 &&
-					   lane_prtcl <= SGMII16)
-					wriop_init_dpmac(sd, lane + 1,
+				     lane_prtcl <= SGMII16)
+					wriop_init_dpmac(sd, sgmii_dpmac[
+							 lane_prtcl],
 							 (int)lane_prtcl);
 				break;
 			}
@@ -129,6 +140,16 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift,
 
 void fsl_serdes_init(void)
 {
+#ifdef CONFIG_FSL_MC_ENET
+	int i , j;
+
+	for (i = XFI1, j = 1; i <= XFI8; i++, j++)
+		xfi_dpmac[i] = j;
+
+	for (i = SGMII1, j = 1; i <= SGMII16; i++, j++)
+		sgmii_dpmac[i] = j;
+#endif
+
 #ifdef CONFIG_SYS_FSL_SRDS_1
 	serdes_init(FSL_SRDS_1,
 		    CONFIG_SYS_FSL_LSCH3_SERDES_ADDR,
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
index 4054c3c7d2..81cf47049f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
@@ -11,6 +11,7 @@
 #include <fsl_ifc.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/arch-fsl-layerscape/immap_lsch3.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/soc.h>
 #include "cpu.h"
@@ -77,11 +78,15 @@ void get_sys_info(struct sys_info *sys_info)
 	sys_info->freq_systembus = sysclk;
 #ifdef CONFIG_DDR_CLK_FREQ
 	sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = CONFIG_DDR_CLK_FREQ;
+#endif
 #else
 	sys_info->freq_ddrbus = sysclk;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 = sysclk;
 #endif
+#endif
 
 	sys_info->freq_systembus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_SYS_PLL_RAT_SHIFT) &
@@ -91,9 +96,11 @@ void get_sys_info(struct sys_info *sys_info)
 	sys_info->freq_ddrbus *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM_PLL_RAT_MASK;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	sys_info->freq_ddrbus2 *= (gur_in32(&gur->rcwsr[0]) >>
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_SHIFT) &
 			FSL_CHASSIS3_RCWSR0_MEM2_PLL_RAT_MASK;
+#endif
 
 	for (i = 0; i < CONFIG_SYS_FSL_NUM_CC_PLLS; i++) {
 		/*
@@ -133,7 +140,9 @@ int get_clocks(void)
 	gd->cpu_clk = sys_info.freq_processor[0];
 	gd->bus_clk = sys_info.freq_systembus;
 	gd->mem_clk = sys_info.freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	gd->arch.mem2_clk = sys_info.freq_ddrbus2;
+#endif
 #if defined(CONFIG_FSL_ESDHC)
 	gd->arch.sdhc_clk = gd->bus_clk / 2;
 #endif /* defined(CONFIG_FSL_ESDHC) */
@@ -169,8 +178,10 @@ ulong get_ddr_freq(ulong ctrl_num)
 	 * DDR controller 0 & 1 are on memory complex 0
 	 * DDR controler 2 is on memory complext 1
 	 */
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	if (ctrl_num >= 2)
 		return gd->arch.mem2_clk;
+#endif
 
 	return gd->mem_clk;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
index ea3114cca4..8ef4f1c38f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ls2085a_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ls2080a_serdes.c
@@ -28,7 +28,12 @@ static struct serdes_config serdes1_cfg_tbl[] = {
 		SGMII1 } },
 	{0x26, {SGMII8, SGMII7, SGMII6, SGMII5, SGMII4, SGMII3, XFI2, XFI1 } },
 	{0x28, {SGMII8, SGMII7, SGMII6, SGMII5, XFI4, XFI3, XFI2, XFI1 } },
+#ifdef CONFIG_LS2080A
+	{0x2A, {NONE, NONE, NONE, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+#endif
+#ifdef CONFIG_LS2085A
 	{0x2A, {XFI8, XFI7, XFI6, XFI5, XFI4, XFI3, XFI2, XFI1 } },
+#endif
 	{0x2B, {SGMII8, SGMII7, SGMII6, SGMII5, XAUI1, XAUI1, XAUI1, XAUI1  } },
 	{0x32, {XAUI2, XAUI2, XAUI2, XAUI2, XAUI1, XAUI1, XAUI1, XAUI1  } },
 	{0x33, {PCIE2, PCIE2, PCIE2, PCIE2, QSGMII_C, QSGMII_D, QSGMII_A,
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/mp.c b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
index 0d600db090..df7ffb88f6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/mp.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/mp.c
@@ -192,6 +192,12 @@ int cpu_release(int nr, int argc, char * const argv[])
 			   (unsigned long)table + SPIN_TABLE_ELEM_SIZE);
 	asm volatile("dsb st");
 	smp_kick_all_cpus();	/* only those with entry addr set will run */
+	/*
+	 * When the first release command runs, all cores are set to go. Those
+	 * without a valid entry address will be trapped by "wfe". "sev" kicks
+	 * them off to check the address again. When set, they continue to run.
+	 */
+	asm volatile("sev");
 
 	return 0;
 }
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 637853d51f..8896b70e78 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -9,10 +9,53 @@
 #include <asm/arch/soc.h>
 #include <asm/io.h>
 #include <asm/global_data.h>
+#include <asm/arch-fsl-layerscape/config.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+#define PLATFORM_CYCLE_ENV_VAR	"a009635_interval_val"
+
+static unsigned long get_internval_val_mhz(void)
+{
+	char *interval = getenv(PLATFORM_CYCLE_ENV_VAR);
+	/*
+	 *  interval is the number of platform cycles(MHz) between
+	 *  wake up events generated by EPU.
+	 */
+	ulong interval_mhz = get_bus_freq(0) / (1000 * 1000);
+
+	if (interval)
+		interval_mhz = simple_strtoul(interval, NULL, 10);
+
+	return interval_mhz;
+}
+
+void erratum_a009635(void)
+{
+	u32 val;
+	unsigned long interval_mhz = get_internval_val_mhz();
+
+	if (!interval_mhz)
+		return;
+
+	val = in_le32(DCSR_CGACRE5);
+	writel(val | 0x00000200, DCSR_CGACRE5);
+
+	val = in_le32(EPU_EPCMPR5);
+	writel(interval_mhz, EPU_EPCMPR5);
+	val = in_le32(EPU_EPCCR5);
+	writel(val | 0x82820000, EPU_EPCCR5);
+	val = in_le32(EPU_EPSMCR5);
+	writel(val | 0x002f0000, EPU_EPSMCR5);
+	val = in_le32(EPU_EPECR5);
+	writel(val | 0x20000000, EPU_EPECR5);
+	val = in_le32(EPU_EPGCR);
+	writel(val | 0x80000000, EPU_EPGCR);
+}
+#endif	/* CONFIG_SYS_FSL_ERRATUM_A009635 */
+
 static void erratum_a008751(void)
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_A008751
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index ba551aaa6e..f434c443ed 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -44,11 +44,9 @@ u32 spl_boot_mode(void)
 #ifdef CONFIG_SPL_BUILD
 void board_init_f(ulong dummy)
 {
-	/* Set global data pointer */
-	gd = &gdata;
 	/* Clear global data */
 	memset((void *)gd, 0, sizeof(gd_t));
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	arch_cpu_init();
 #endif
 #ifdef CONFIG_FSL_IFC
@@ -56,7 +54,7 @@ void board_init_f(ulong dummy)
 #endif
 	board_early_init_f();
 	timer_init();
-#ifdef CONFIG_LS2085A
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	env_init();
 #endif
 	get_clocks();
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 65e76ace90..76d1fafde7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -87,8 +87,10 @@ dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
 
 dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
 	ls1021a-twr.dtb
-dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2085a-qds.dtb \
-	fsl-ls2085a-rdb.dtb
+dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
+	fsl-ls2080a-rdb.dtb
+dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds.dtb \
+	fsl-ls1043a-rdb.dtb
 
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dts b/arch/arm/dts/fsl-ls1043a-qds.dts
new file mode 100644
index 0000000000..74352227d4
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a-qds.dts
@@ -0,0 +1,124 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A QDS Board";
+};
+
+&i2c0 {
+	status = "okay";
+	pca9547@77 {
+		compatible = "philips,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				/* IRQ10_B */
+				interrupts = <0 150 0x4>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			eeprom@56 {
+				compatible = "at24,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "at24,24c512";
+				reg = <0x57>;
+			};
+
+			adt7461a@4c {
+				compatible = "adt7461a";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+	status = "okay";
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		reg = <0x3 0x0 0x0000100>;
+		bank-width = <1>;
+		device-width = <1>;
+		ranges = <0 3 0 0x100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts
new file mode 100644
index 0000000000..16c5c89d7c
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a-rdb.dts
@@ -0,0 +1,103 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "fsl-ls1043a.dtsi"
+
+/ {
+	model = "LS1043A RDB Board";
+
+        aliases {
+		spi1 = &dspi0;
+        };
+
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dspiflash: n25q12a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+};
+
+&i2c0 {
+	status = "okay";
+	ina220@40 {
+		compatible = "ti,ina220";
+		reg = <0x40>;
+		shunt-resistor = <1000>;
+	};
+	adt7461a@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+	eeprom@56 {
+		compatible = "at24,24c512";
+		reg = <0x52>;
+	};
+
+	eeprom@57 {
+		compatible = "at24,24c512";
+		reg = <0x53>;
+	};
+
+	rtc@68 {
+		compatible = "pericom,pt7c4338";
+		reg = <0x68>;
+	};
+};
+
+&ifc {
+	status = "okay";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NOR, NAND Flashes and FPGA on board */
+	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+		  0x2 0x0 0x0 0x7e800000 0x00010000
+		  0x3 0x0 0x0 0x7fb00000 0x00000100>;
+
+		nor@0,0 {
+			compatible = "cfi-flash";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@1,0 {
+			compatible = "fsl,ifc-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x1 0x0 0x10000>;
+		};
+
+		cpld: board-control@2,0 {
+			compatible = "fsl,ls1043ardb-cpld";
+			reg = <0x2 0x0 0x0000100>;
+		};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
new file mode 100644
index 0000000000..85ea81e2a6
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -0,0 +1,186 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
+ *
+ * Copyright (C) 2014-2015, Freescale Semiconductor
+ *
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+	compatible = "fsl,ls1043a";
+	interrupt-parent = <&gic>;
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			clocks = <&clockgen 1 0>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			clocks = <&clockgen 1 0>;
+		};
+	};
+
+	sysclk: sysclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+		clock-output-names = "sysclk";
+	};
+
+	gic: interrupt-controller@1400000 {
+		compatible = "arm,gic-400";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
+		      <0x0 0x1402000 0 0x2000>, /* GICC */
+		      <0x0 0x1404000 0 0x2000>, /* GICH */
+		      <0x0 0x1406000 0 0x2000>; /* GICV */
+		interrupts = <1 9 0xf08>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clockgen: clocking@1ee1000 {
+			compatible = "fsl,ls1043a-clockgen";
+			reg = <0x0 0x1ee1000 0x0 0x1000>;
+			#clock-cells = <2>;
+			clocks = <&sysclk>;
+		};
+
+		dspi0: dspi@2100000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <0 64 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		dspi1: dspi@2110000 {
+			compatible = "fsl,vf610-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <0 65 0x4>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 0>;
+			num-cs = <6>;
+			big-endian;
+			status = "disabled";
+		};
+
+		ifc: ifc@1530000 {
+			compatible = "fsl,ifc", "simple-bus";
+			reg = <0x0 0x1530000 0x0 0x10000>;
+			interrupts = <0 43 0x4>;
+		};
+
+		i2c0: i2c@2180000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2180000 0x0 0x10000>;
+			interrupts = <0 56 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@2190000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2190000 0x0 0x10000>;
+			interrupts = <0 57 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@21a0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21a0000 0x0 0x10000>;
+			interrupts = <0 58 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@21b0000 {
+			compatible = "fsl,vf610-i2c";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x21b0000 0x0 0x10000>;
+			interrupts = <0 59 0x4>;
+			clock-names = "i2c";
+			clocks = <&clockgen 4 0>;
+			status = "disabled";
+		};
+
+		duart0: serial@21c0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0500 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart1: serial@21c0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x00 0x21c0600 0x0 0x100>;
+			interrupts = <0 54 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart2: serial@21d0500 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0500 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+
+		duart3: serial@21d0600 {
+			compatible = "fsl,ns16550", "ns16550a";
+			reg = <0x0 0x21d0600 0x0 0x100>;
+			interrupts = <0 55 0x4>;
+			clocks = <&clockgen 4 0>;
+		};
+	};
+};
diff --git a/arch/arm/dts/fsl-ls2085a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts
index 4477e54154..547ec27837 100644
--- a/arch/arm/dts/fsl-ls2085a-qds.dts
+++ b/arch/arm/dts/fsl-ls2080a-qds.dts
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a QDS board device tree source
+ * Freescale ls2080a QDS board device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -8,11 +8,11 @@
 
 /dts-v1/;
 
-#include "fsl-ls2085a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
-	model = "Freescale Layerscape 2085a QDS Board";
-	compatible = "fsl,ls2085a-qds", "fsl,ls2085a";
+	model = "Freescale Layerscape 2080a QDS Board";
+	compatible = "fsl,ls2080a-qds", "fsl,ls2080a";
 
 	aliases {
 		spi1 = &dspi;
diff --git a/arch/arm/dts/fsl-ls2085a-rdb.dts b/arch/arm/dts/fsl-ls2080a-rdb.dts
index 25278dfaf8..1a1813bdbf 100644
--- a/arch/arm/dts/fsl-ls2085a-rdb.dts
+++ b/arch/arm/dts/fsl-ls2080a-rdb.dts
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a RDB board device tree source
+ * Freescale ls2080a RDB board device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -8,11 +8,11 @@
 
 /dts-v1/;
 
-#include "fsl-ls2085a.dtsi"
+#include "fsl-ls2080a.dtsi"
 
 / {
-	model = "Freescale Layerscape 2085a RDB Board";
-	compatible = "fsl,ls2085a-rdb", "fsl,ls2085a";
+	model = "Freescale Layerscape 2080a RDB Board";
+	compatible = "fsl,ls2080a-rdb", "fsl,ls2080a";
 
 	aliases {
 		spi1 = &dspi;
diff --git a/arch/arm/dts/fsl-ls2085a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index 96404c5d65..a5c579c5a5 100644
--- a/arch/arm/dts/fsl-ls2085a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -1,5 +1,5 @@
 /*
- * Freescale ls2085a SOC common device tree source
+ * Freescale ls2080a SOC common device tree source
  *
  * Copyright 2013-2015 Freescale Semiconductor, Inc.
  *
@@ -7,7 +7,7 @@
  */
 
 / {
-	compatible = "fsl,ls2085a";
+	compatible = "fsl,ls2080a";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h
index 87bb937582..b5a2d28c08 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/config.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h
@@ -17,10 +17,16 @@
 #define CONFIG_SYS_FSL_DDR		/* Freescale DDR driver */
 #define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_5_0
 
-#if defined(CONFIG_LS2085A)
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 #define CONFIG_MAX_CPUS				16
 #define CONFIG_SYS_FSL_IFC_BANK_COUNT		8
+#ifdef CONFIG_LS2080A
+#define CONFIG_NUM_DDR_CONTROLLERS		2
+#endif
+#ifdef CONFIG_LS2085A
 #define CONFIG_NUM_DDR_CONTROLLERS		3
+#define CONFIG_SYS_FSL_HAS_DP_DDR
+#endif
 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS		{ 1, 1, 4, 4 }
 #define	SRDS_MAX_LANES	8
 #define CONFIG_SYS_FSL_SRDS_1
@@ -44,6 +50,7 @@
 #define CONFIG_SYS_FSL_CCSR_SCFG_LE
 #define CONFIG_SYS_FSL_ESDHC_LE
 #define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_FSL_PEX_LUT_LE
 
 #define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
 
@@ -60,6 +67,13 @@
 #define CCI_MN_DVM_DOMAIN_CTL		0x200
 #define CCI_MN_DVM_DOMAIN_CTL_SET	0x210
 
+#define CCI_HN_F_0_BASE			(CCI_MN_BASE + 0x200000)
+#define CCI_HN_F_1_BASE			(CCI_MN_BASE + 0x210000)
+#define CCN_HN_F_SAM_CTL		0x8	/* offset on base HN_F base */
+#define CCN_HN_F_SAM_NODEID_MASK	0x7f
+#define CCN_HN_F_SAM_NODEID_DDR0	0x4
+#define CCN_HN_F_SAM_NODEID_DDR1	0xe
+
 #define CCI_RN_I_0_BASE			(CCI_MN_BASE + 0x800000)
 #define CCI_RN_I_2_BASE			(CCI_MN_BASE + 0x820000)
 #define CCI_RN_I_6_BASE			(CCI_MN_BASE + 0x860000)
@@ -84,11 +98,20 @@
 #define TZPCDECPROT_2_SET_BASE			(TZPC_BASE + 0x81C)
 #define TZPCDECPROT_2_CLR_BASE			(TZPC_BASE + 0x820)
 
+#define DCSR_CGACRE5		0x700070914ULL
+#define EPU_EPCMPR5		0x700060914ULL
+#define EPU_EPCCR5		0x700060814ULL
+#define EPU_EPSMCR5		0x700060228ULL
+#define EPU_EPECR5		0x700060314ULL
+#define EPU_EPCTR5		0x700060a14ULL
+#define EPU_EPGCR		0x700060000ULL
+
 #define CONFIG_SYS_FSL_ERRATUM_A008336
 #define CONFIG_SYS_FSL_ERRATUM_A008511
 #define CONFIG_SYS_FSL_ERRATUM_A008514
 #define CONFIG_SYS_FSL_ERRATUM_A008585
 #define CONFIG_SYS_FSL_ERRATUM_A008751
+#define CONFIG_SYS_FSL_ERRATUM_A009635
 #elif defined(CONFIG_LS1043A)
 #define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_CACHELINE_SIZE		64
@@ -113,6 +136,7 @@
 #define CONFIG_SYS_FSL_WDOG_BE
 #define CONFIG_SYS_FSL_DSPI_BE
 #define CONFIG_SYS_FSL_QSPI_BE
+#define CONFIG_SYS_FSL_PEX_LUT_BE
 
 #define QE_MURAM_SIZE		0x6000UL
 #define MAX_QE_RISC		1
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
index 29039963f1..454409488a 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h
@@ -8,8 +8,8 @@
 #define _FSL_LAYERSCAPE_CPU_H
 
 static struct cpu_type cpu_type_list[] = {
-	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
 	CPU_TYPE_ENTRY(LS2080, LS2080, 8),
+	CPU_TYPE_ENTRY(LS2085, LS2085, 8),
 	CPU_TYPE_ENTRY(LS2045, LS2045, 4),
 	CPU_TYPE_ENTRY(LS1043, LS1043, 4),
 };
@@ -103,7 +103,7 @@ struct sys_mmu_table {
 	u64 phys_addr;
 	u64 size;
 	u64 memory_type;
-	u64 share;
+	u64 attribute;
 };
 
 struct table_info {
@@ -115,7 +115,8 @@ struct table_info {
 static const struct sys_mmu_table early_mmu_table[] = {
 #ifdef CONFIG_FSL_LSCH3
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	/* For IFC Region #1, only the first 4MB is cache-enabled */
@@ -129,17 +130,24 @@ static const struct sys_mmu_table early_mmu_table[] = {
 	  CONFIG_SYS_FSL_IFC_SIZE1, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
+	/* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */
+	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
+	  CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2,
+	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #elif defined(CONFIG_FSL_LSCH2)
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
 	  CONFIG_SYS_FSL_IFC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
@@ -152,72 +160,93 @@ static const struct sys_mmu_table early_mmu_table[] = {
 static const struct sys_mmu_table final_mmu_table[] = {
 #ifdef CONFIG_FSL_LSCH3
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 	{ CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2,
-	  CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2,
 	  CONFIG_SYS_FSL_IFC_SIZE2, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_MC_BASE, CONFIG_SYS_FSL_MC_BASE,
-	  CONFIG_SYS_FSL_MC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_MC_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_NI_BASE, CONFIG_SYS_FSL_NI_BASE,
-	  CONFIG_SYS_FSL_NI_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_NI_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	/* For QBMAN portal, only the first 64MB is cache-enabled */
 	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QBMAN_SIZE_1, MT_NORMAL,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
 	  CONFIG_SYS_FSL_QBMAN_BASE + CONFIG_SYS_FSL_QBMAN_SIZE_1,
 	  CONFIG_SYS_FSL_QBMAN_SIZE - CONFIG_SYS_FSL_QBMAN_SIZE_1,
-	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
-#ifdef CONFIG_LS2085A
+	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 	{ CONFIG_SYS_PCIE4_PHYS_ADDR, CONFIG_SYS_PCIE4_PHYS_ADDR,
-	  CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE4_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 #endif
 	{ CONFIG_SYS_FSL_WRIOP1_BASE, CONFIG_SYS_FSL_WRIOP1_BASE,
-	  CONFIG_SYS_FSL_WRIOP1_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_WRIOP1_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_AIOP1_BASE, CONFIG_SYS_FSL_AIOP1_BASE,
-	  CONFIG_SYS_FSL_AIOP1_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_AIOP1_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_PEBUF_BASE, CONFIG_SYS_FSL_PEBUF_BASE,
-	  CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_PEBUF_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #elif defined(CONFIG_FSL_LSCH2)
 	{ CONFIG_SYS_FSL_BOOTROM_BASE, CONFIG_SYS_FSL_BOOTROM_BASE,
-	  CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_BOOTROM_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_CCSR_BASE, CONFIG_SYS_FSL_CCSR_BASE,
-	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_CCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE,
 	  CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DCSR_BASE, CONFIG_SYS_FSL_DCSR_BASE,
-	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_DCSR_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_QSPI_BASE, CONFIG_SYS_FSL_QSPI_BASE,
-	  CONFIG_SYS_FSL_QSPI_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QSPI_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_IFC_BASE, CONFIG_SYS_FSL_IFC_BASE,
 	  CONFIG_SYS_FSL_IFC_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
 	{ CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1,
 	  CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL,
 	  PMD_SECT_OUTER_SHARE | PMD_SECT_NS },
 	{ CONFIG_SYS_FSL_QBMAN_BASE, CONFIG_SYS_FSL_QBMAN_BASE,
-	  CONFIG_SYS_FSL_QBMAN_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_FSL_QBMAN_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE2, CONFIG_SYS_FSL_DRAM_BASE2,
 	  CONFIG_SYS_FSL_DRAM_SIZE2, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 	{ CONFIG_SYS_PCIE1_PHYS_ADDR, CONFIG_SYS_PCIE1_PHYS_ADDR,
-	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE1_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE2_PHYS_ADDR, CONFIG_SYS_PCIE2_PHYS_ADDR,
-	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE2_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_PCIE3_PHYS_ADDR, CONFIG_SYS_PCIE3_PHYS_ADDR,
-	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE, PMD_SECT_NON_SHARE },
+	  CONFIG_SYS_PCIE3_PHYS_SIZE, MT_DEVICE_NGNRNE,
+	  PMD_SECT_NON_SHARE | PMD_SECT_PXN | PMD_SECT_UXN },
 	{ CONFIG_SYS_FSL_DRAM_BASE3, CONFIG_SYS_FSL_DRAM_BASE3,
 	  CONFIG_SYS_FSL_DRAM_SIZE3, MT_NORMAL, PMD_SECT_OUTER_SHARE },
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fdt.h b/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
index 4da73ab142..099563e871 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fdt.h
@@ -11,4 +11,5 @@ void alloc_stream_ids(int start_id, int count, u32 *stream_ids, int max_cnt);
 void append_mmu_masters(void *blob, const char *smmu_path,
 			const char *master_name, u32 *stream_ids, int count);
 void fdt_fixup_smmu_pcie(void *blob);
+void fdt_fixup_board_enet(void *fdt);
 #endif	/* _ASM_ARMV8_FSL_LAYERSCAPE_FDT_H_ */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index e1043b5a5f..d1fbde79d5 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -9,7 +9,7 @@
 
 #include <config.h>
 
-#if defined(CONFIG_LS2085A)
+#if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
 enum srds_prtcl {
 	NONE = 0,
 	PCIE1,
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
index d941437d63..83caa918bd 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
@@ -30,9 +30,9 @@
 #define CONFIG_SYS_NS16550_COM2			(CONFIG_SYS_IMMR + 0x011c0600)
 #define CONFIG_SYS_NS16550_COM3			(CONFIG_SYS_IMMR + 0x011d0500)
 #define CONFIG_SYS_NS16550_COM4			(CONFIG_SYS_IMMR + 0x011d0600)
-#define CONFIG_SYS_FSL_XHCI_USB1_ADDR		(CONFIG_SYS_IMMR + 0x01f00000)
-#define CONFIG_SYS_FSL_XHCI_USB2_ADDR		(CONFIG_SYS_IMMR + 0x02000000)
-#define CONFIG_SYS_FSL_XHCI_USB3_ADDR		(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_LS1043A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x01f00000)
+#define CONFIG_SYS_LS1043A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02000000)
+#define CONFIG_SYS_LS1043A_XHCI_USB3_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
 #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
 #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
 #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
@@ -60,6 +60,10 @@
 #define CONFIG_SYS_PCIE1_PHYS_ADDR		0x4000000000ULL
 #define CONFIG_SYS_PCIE2_PHYS_ADDR		0x4800000000ULL
 #define CONFIG_SYS_PCIE3_PHYS_ADDR		0x5000000000ULL
+/* LUT registers */
+#define PCIE_LUT_BASE				0x10000
+#define PCIE_LUT_LCTRL0				0x7F8
+#define PCIE_LUT_DBG				0x7FC
 
 /* TZ Address Space Controller Definitions */
 #define TZASC1_BASE			0x01100000	/* as per CCSR map. */
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 6a70d44305..cd96604171 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -51,8 +51,8 @@
 #define I2C3_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01020000)
 #define I2C4_BASE_ADDR				(CONFIG_SYS_IMMR + 0x01030000)
 
-#define CONFIG_SYS_LS2085A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
-#define CONFIG_SYS_LS2085A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02110000)
+#define CONFIG_SYS_LS2080A_XHCI_USB1_ADDR	(CONFIG_SYS_IMMR + 0x02100000)
+#define CONFIG_SYS_LS2080A_XHCI_USB2_ADDR	(CONFIG_SYS_IMMR + 0x02110000)
 
 /* TZ Address Space Controller Definitions */
 #define TZASC1_BASE			0x01100000	/* as per CCSR map. */
@@ -78,6 +78,10 @@
 #define CONFIG_SYS_PCIE2_PHYS_ADDR		0x1200000000ULL
 #define CONFIG_SYS_PCIE3_PHYS_ADDR		0x1400000000ULL
 #define CONFIG_SYS_PCIE4_PHYS_ADDR		0x1600000000ULL
+/* LUT registers */
+#define PCIE_LUT_BASE				0x80000
+#define PCIE_LUT_LCTRL0				0x7F8
+#define PCIE_LUT_DBG				0x7FC
 
 /* Device Configuration */
 #define DCFG_BASE		0x01e00000
@@ -115,7 +119,9 @@ struct sys_info {
 	unsigned long freq_processor[CONFIG_MAX_CPUS];
 	unsigned long freq_systembus;
 	unsigned long freq_ddrbus;
+#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
 	unsigned long freq_ddrbus2;
+#endif
 	unsigned long freq_localbus;
 	unsigned long freq_qe;
 #ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
index 5c945309a9..954104b0ee 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/ls2085a_stream_id.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/ls2080a_stream_id.h
@@ -7,7 +7,7 @@
 #ifndef __FSL_STREAM_ID_H
 #define __FSL_STREAM_ID_H
 
-/* Stream IDs on ls2085a devices are not hardwired and are
+/* Stream IDs on ls2080a devices are not hardwired and are
  * programmed by sw.  There are a limited number of stream IDs
  * available, and the partitioning of them is scenario dependent.
  * This header defines the partitioning between legacy, PCI,
@@ -17,7 +17,7 @@
  * on the specific hardware config-- e.g. perhaps not all
  * PEX controllers are in use.
  *
- * On LS2085 stream IDs are programmed in AMQ registers (32-bits) for
+ * On LS2080 stream IDs are programmed in AMQ registers (32-bits) for
  * each of the different bus masters.  The relationship between
  * the AMQ registers and stream IDs is defined in the table below:
  *          AMQ bit    streamID bit
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 5ed456e4e2..504c1f9197 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -23,6 +23,14 @@
 #define scfg_out32(a, v)   out_be32(a, v)
 #endif
 
+#ifdef CONFIG_SYS_FSL_PEX_LUT_LE
+#define pex_lut_in32(a)       in_le32(a)
+#define pex_lut_out32(a, v)   out_le32(a, v)
+#elif defined(CONFIG_SYS_FSL_PEX_LUT_BE)
+#define pex_lut_in32(a)       in_be32(a)
+#define pex_lut_out32(a, v)   out_be32(a, v)
+#endif
+
 struct cpu_type {
 	char name[15];
 	u32 soc_ver;
@@ -50,4 +58,7 @@ void fsl_lsch2_early_init_f(void);
 #endif
 
 void cpu_name(char *name);
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
+void erratum_a009635(void);
+#endif
 #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 09ed9809f1..1bcdf04dd4 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -31,7 +31,7 @@
 #define RCWSR4_SRDS1_PRTCL_SHIFT	24
 #define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
 
-#define TIMER_COMP_VAL			0xffffffff
+#define TIMER_COMP_VAL			0xffffffffffffffffull
 #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
 #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
 
diff --git a/arch/arm/include/asm/armv8/mmu.h b/arch/arm/include/asm/armv8/mmu.h
index d8d9af45db..2e2a3a8226 100644
--- a/arch/arm/include/asm/armv8/mmu.h
+++ b/arch/arm/include/asm/armv8/mmu.h
@@ -119,7 +119,7 @@
 
 void set_pgtable_section(u64 *page_table, u64 index,
 			 u64 section, u64 memory_type,
-			 u64 share);
+			 u64 attribute);
 void set_pgtable_table(u64 *page_table, u64 index,
 		       u64 *table_addr);
 
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index 4e3ea55e29..bd27281e79 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -46,7 +46,7 @@ struct arch_global_data {
 	u32 omap_boot_mode;
 	u8 omap_ch_flags;
 #endif
-#ifdef CONFIG_FSL_LSCH3
+#if defined(CONFIG_FSL_LSCH3) && defined(CONFIG_SYS_FSL_HAS_DP_DDR)
 	unsigned long mem2_clk;
 #endif
 };