Merge branch 'master' of git://git.denx.de/u-boot into resolve

Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

1 files changed, 114 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 2be192d578..e5ecf5dae5 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -24,6 +24,109 @@
 #include <command.h>
 #include <linux/compiler.h>
 #include <asm/processor.h>
+#include "fsl_corenet_serdes.h"
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in DCSR.
+ *
+ * Array offsets[] contains a list of offsets within DCSR.  According to the
+ * erratum document, the value at each offset should be 2.
+ */
+static void check_erratum_a4849(uint32_t svr)
+{
+	void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
+	unsigned int i;
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	static const uint8_t offsets[] = {
+		0x50, 0x54, 0x58, 0x90, 0x94, 0x98
+	};
+#endif
+#ifdef CONFIG_PPC_P4080
+	static const uint8_t offsets[] = {
+		0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
+	};
+#endif
+	uint32_t x108; /* The value that should be at offset 0x108 */
+
+	for (i = 0; i < ARRAY_SIZE(offsets); i++) {
+		if (in_be32(dcsr + offsets[i]) != 2) {
+			printf("Work-around for Erratum A004849 is not enabled\n");
+			return;
+		}
+	}
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	x108 = 0x12;
+#endif
+
+#ifdef CONFIG_PPC_P4080
+	/*
+	 * For P4080, the erratum document says that the value at offset 0x108
+	 * should be 0x12 on rev2, or 0x1c on rev3.
+	 */
+	if (SVR_MAJ(svr) == 2)
+		x108 = 0x12;
+	if (SVR_MAJ(svr) == 3)
+		x108 = 0x1c;
+#endif
+
+	if (in_be32(dcsr + 0x108) != x108) {
+		printf("Work-around for Erratum A004849 is not enabled\n");
+		return;
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004849 enabled\n");
+}
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in the SerDes register block.
+ *
+ * The work-around says that for each SerDes lane, write BnTTLCRy0 =
+ * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
+
+ */
+static void check_erratum_a4580(uint32_t svr)
+{
+	const serdes_corenet_t __iomem *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	unsigned int lane;
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		if (serdes_lane_enabled(lane)) {
+			const struct serdes_lane __iomem *srds_lane =
+				&srds_regs->lane[serdes_get_lane_idx(lane)];
+
+			/*
+			 * Verify that the values we were supposed to write in
+			 * the PBI are actually there.  Also, the lower 15
+			 * bits of res4[3] should be the same as the upper 15
+			 * bits of res4[1].
+			 */
+			if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
+			    (in_be32(&srds_lane->res4[1]) != 0x880000) ||
+			    (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
+				printf("Work-around for Erratum A004580 is "
+				       "not enabled\n");
+				return;
+			}
+		}
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004580 enabled\n");
+}
+#endif
 
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
@@ -137,6 +240,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
 	puts("Work-around for Erratum A004934 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4849(svr);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4580(svr);
+#endif
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+	puts("Work-around for Erratum PCIe-A003 enabled\n");
+#endif
 	return 0;
 }