x86: Coding Style Cleanup

Perform some basic code cleanups of the x86 files

4 files changed, 362 insertions, 373 deletions

diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c
index 519bfd8b0c..7acd471d96 100644
--- a/arch/i386/cpu/sc520/sc520.c
+++ b/arch/i386/cpu/sc520/sc520.c
@@ -41,7 +41,8 @@ volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000;
 
 void init_sc520(void)
 {
-	/* Set the UARTxCTL register at it's slower,
+	/*
+	 * Set the UARTxCTL register at it's slower,
 	 * baud clock giving us a 1.8432 MHz reference
 	 */
 	writeb(0x07, &sc520_mmcr->uart1ctl);
@@ -50,25 +51,30 @@ void init_sc520(void)
 	/* first set the timer pin mapping */
 	writeb(0x72, &sc520_mmcr->clksel);	/* no clock frequency selected, use 1.1892MHz */
 
-	/* enable PCI bus arbitrer */
-	writeb(0x02, &sc520_mmcr->sysarbctl);	/* enable concurrent mode */
+	/* enable PCI bus arbiter (concurrent mode) */
+	writeb(0x02, &sc520_mmcr->sysarbctl);
 
-	writeb(0x1f, &sc520_mmcr->sysarbmenb);	/* enable external grants */
-	writeb(0x04, &sc520_mmcr->hbctl);	/* enable posted-writes */
+	/* enable external grants */
+	writeb(0x1f, &sc520_mmcr->sysarbmenb);
+
+	/* enable posted-writes */
+	writeb(0x04, &sc520_mmcr->hbctl);
 
 	if (CONFIG_SYS_SC520_HIGH_SPEED) {
-		writeb(0x02, &sc520_mmcr->cpuctl);	/* set it to 133 MHz and write back */
+		/* set it to 133 MHz and write back */
+		writeb(0x02, &sc520_mmcr->cpuctl);
 		gd->cpu_clk = 133000000;
 		printf("## CPU Speed set to 133MHz\n");
 	} else {
-		writeb(0x01, &sc520_mmcr->cpuctl);	/* set it to 100 MHz and write back */
+		/* set it to 100 MHz and write back */
+		writeb(0x01, &sc520_mmcr->cpuctl);
 		printf("## CPU Speed set to 100MHz\n");
 		gd->cpu_clk = 100000000;
 	}
 
 
 	/* wait at least one millisecond */
-	asm("movl	$0x2000,%%ecx\n"
+	asm("movl	$0x2000, %%ecx\n"
 	    "0:		pushl %%ecx\n"
 	    "popl	%%ecx\n"
 	    "loop 0b\n": : : "ecx");
@@ -107,15 +113,15 @@ unsigned long init_sc520_dram(void)
 
 	/* set SDRAM speed here */
 
-	refresh_rate/=78;
-	if (refresh_rate<=1) {
-		val = 0;  /* 7.8us */
-	} else if (refresh_rate==2) {
-		val = 1;  /* 15.6us */
-	} else if (refresh_rate==3 || refresh_rate==4) {
-		val = 2;  /* 31.2us */
+	refresh_rate /= 78;
+	if (refresh_rate <= 1) {
+		val = 0;	/* 7.8us */
+	} else if (refresh_rate == 2) {
+		val = 1;	/* 15.6us */
+	} else if (refresh_rate == 3 || refresh_rate == 4) {
+		val = 2;	/* 31.2us */
 	} else {
-		val = 3;  /* 62.4us */
+		val = 3;	/* 62.4us */
 	}
 
 	tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4);
@@ -124,9 +130,9 @@ unsigned long init_sc520_dram(void)
 	val = readb(&sc520_mmcr->drctmctl) & 0xf0;
 
 	if (cas_precharge_delay==3) {
-		val |= 0x04;   /* 3T */
+		val |= 0x04;	/* 3T */
 	} else if (cas_precharge_delay==4) {
-		val |= 0x08;   /* 4T */
+		val |= 0x08;	/* 4T */
 	} else if (cas_precharge_delay>4) {
 		val |= 0x0c;
 	}
@@ -139,8 +145,10 @@ unsigned long init_sc520_dram(void)
 	writeb(val, &c520_mmcr->drctmctl);
 #endif
 
-	/* We read-back the configuration of the dram
-	 * controller that the assembly code wrote */
+	/*
+	 * We read-back the configuration of the dram
+	 * controller that the assembly code wrote
+	 */
 	dram_ctrl = readl(&sc520_mmcr->drcbendadr);
 
 	bd->bi_dram[0].start = 0;
@@ -148,7 +156,6 @@ unsigned long init_sc520_dram(void)
 		/* bank 0 enabled */
 		dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
 		bd->bi_dram[0].size = bd->bi_dram[1].start;
-
 	} else {
 		bd->bi_dram[0].size = 0;
 		bd->bi_dram[1].start = bd->bi_dram[0].start;
@@ -179,11 +186,6 @@ unsigned long init_sc520_dram(void)
 	} else {
 		bd->bi_dram[3].size = 0;
 	}
-
-
-#if 0
-	printf("Configured %d bytes of dram\n", dram_present);
-#endif
 	gd->ram_size = dram_present;
 
 	return dram_present;
diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S
index fff56c00b4..7c2de31134 100644
--- a/arch/i386/cpu/sc520/sc520_asm.S
+++ b/arch/i386/cpu/sc520/sc520_asm.S
@@ -172,366 +172,349 @@
 .equ            ROW11_DATA, 0x07070707    /* 11 row data/also bank switch (MASK) */
 .equ            ROW10_DATA, 0xaaaaaaaa    /* 10 row data/also bank switch (MASK) */
 
-
- /*
-  * initialize dram controller registers
-  */
 .globl mem_init
 mem_init:
-	xorw    %ax,%ax
-	movl    $DBCTL, %edi
-	movb     %al, (%edi)             /* disable write buffer */
-
-	movl    $ECCCTL, %edi
-	movb     %al, (%edi)             /* disable ECC */
-
-	movl    $DRCTMCTL, %edi
-	movb    $0x1E,%al                /* Set SDRAM timing for slowest */
-	movb     %al, (%edi)
-
- /*
-  * setup loop to do 4 external banks starting with bank 3
-  */
-	movl    $0xff000000,%eax         /* enable last bank and setup */
-	movl    $DRCBENDADR, %edi        /* ending address register */
-	movl     %eax, (%edi)
-
-	movl    $DRCCFG, %edi            /* setup */
-	movw    $0xbbbb,%ax              /* dram config register for  */
-	movw    %ax, (%edi)
-
- /*
-  * issue a NOP to all DRAMs
-  */
-	movl    $DRCCTL, %edi            /* setup DRAM control register with */
-	movb    $0x1,%al                 /* Disable refresh,disable write buffer */
-	movb     %al, (%edi)
-	movl    $CACHELINESZ, %esi       /* just a dummy address to write for */
-	movw     %ax, (%esi)
- /*
-  * delay for 100 usec? 200?
-  * ******this is a cludge for now *************
-  */
-	movw    $100,%cx
+	/* initialize dram controller registers */
+	xorw	%ax, %ax
+	movl	$DBCTL, %edi
+	movb	%al, (%edi)		/* disable write buffer */
+
+	movl	$ECCCTL, %edi
+	movb	%al, (%edi)		/* disable ECC */
+
+	movl	$DRCTMCTL, %edi
+	movb	$0x1e, %al		/* Set SDRAM timing for slowest */
+	movb	%al, (%edi)
+
+	/* setup loop to do 4 external banks starting with bank 3 */
+	movl	$0xff000000, %eax	/* enable last bank and setup */
+	movl	$DRCBENDADR, %edi	/* ending address register */
+	movl	%eax, (%edi)
+
+	movl	$DRCCFG, %edi		/* setup */
+	movw	$0xbbbb, %ax		/* dram config register for  */
+	movw	%ax, (%edi)
+
+	/* issue a NOP to all DRAMs */
+	movl	$DRCCTL, %edi		/* setup DRAM control register with */
+	movb	$0x01, %al		/* Disable refresh,disable write buffer */
+	movb	%al, (%edi)
+	movl	$CACHELINESZ, %esi	/* just a dummy address to write for */
+	movw	%ax, (%esi)
+
+	/* delay for 100 usec? */
+	movw	$100, %cx
 sizdelay:
-	loop    sizdelay                 /* we need 100 usec here */
- /***********************************************/
+	loop	sizdelay
 
- /*
-  * issue all banks precharge
-  */
-	movb    $0x2,%al                 /* All banks precharge */
-	movb     %al, (%edi)
-	movw     %ax, (%esi)
+	/* issue all banks precharge */
+	movb	$0x02, %al
+	movb	%al, (%edi)
+	movw	%ax, (%esi)
 
- /*
-  * issue 2 auto refreshes to all banks
-  */
-	movb    $0x4,%al                 /* Auto refresh cmd */
-	movb     %al, (%edi)
-	movw    $2,%cx
+	/* issue 2 auto refreshes to all banks */
+	movb	$0x04, %al	/* Auto refresh cmd */
+	movb	%al, (%edi)
+	movw	$0x02, %cx
 refresh1:
-	movw     %ax, (%esi)
-	loop    refresh1
-
- /*
-  * issue LOAD MODE REGISTER command
-  */
-	movb    $0x3,%al                 /* Load mode register cmd */
-	movb     %al, (%edi)
-	movw     %ax, (%esi)
-
- /*
-  * issue 8 more auto refreshes to all banks
-  */
-	movb    $0x4,%al                 /* Auto refresh cmd */
-	movb     %al, (%edi)
-	movw    $8,%cx
+	movw	%ax, (%esi)
+	loop	refresh1
+
+	/* issue LOAD MODE REGISTER command */
+	movb	$0x03, %al	/* Load mode register cmd */
+	movb	%al, (%edi)
+	movw	%ax, (%esi)
+
+	/* issue 8 more auto refreshes to all banks */
+	movb	$0x04, %al	/* Auto refresh cmd */
+	movb	%al, (%edi)
+	movw	$0x0008, %cx
 refresh2:
-	movw     %ax, (%esi)
-	loop    refresh2
+	movw	%ax, (%esi)
+	loop	refresh2
 
- /*
-  * set control register to NORMAL mode
-  */
-	movb    $0x0,%al                 /* Normal mode value */
-	movb     %al, (%edi)
+	/* set control register to NORMAL mode */
+	movb	$0x00, %al	/* Normal mode value */
+	movb	%al, (%edi)
 
- /*
-  * size dram starting with external bank 3 moving to external bank 0
-  */
-	movl    $0x3,%ecx                /* start with external bank 3 */
+	/*
+	 * size dram starting with external bank 3
+	 * moving to external bank 0
+	 */
+	movl	$0x3, %ecx	/* start with external bank 3 */
 
 nextbank:
 
- /*
-  * write col 11 wrap adr
-  */
-	movl    $COL11_ADR, %esi         /* set address to max col (11) wrap addr */
-	movl    $COL11_DATA, %eax        /* pattern for max supported columns(11) */
-	movl    %eax, (%esi)             /* write max col pattern at max col adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write col 10 wrap adr
-  */
+	/* write col 11 wrap adr */
+	movl	$COL11_ADR, %esi	/* set address to max col (11) wrap addr */
+	movl	$COL11_DATA, %eax	/* pattern for max supported columns(11) */
+	movl	%eax, (%esi)		/* write max col pattern at max col adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write col 10 wrap adr */
+	movl	$COL10_ADR, %esi	/* set address to 10 col wrap address */
+	movl	$COL10_DATA, %eax	/* pattern for 10 col wrap */
+	movl	%eax, (%esi)		/* write 10 col pattern @ 10 col wrap adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write col 9 wrap adr */
+	movl	$COL09_ADR, %esi	/* set address to 9 col wrap address */
+	movl	$COL09_DATA, %eax	/* pattern for 9 col wrap */
+	movl	%eax, (%esi)		/* write 9 col pattern @ 9 col wrap adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write col 8 wrap adr */
+	movl	$COL08_ADR, %esi	/* set address to min(8) col wrap address */
+	movl	$COL08_DATA, %eax	/* pattern for min (8) col wrap */
+	movl	%eax, (%esi)		/* write min col pattern @ min col adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write row 14 wrap adr */
+	movl	$ROW14_ADR, %esi	/* set address to max row (14) wrap addr */
+	movl	$ROW14_DATA, %eax	/* pattern for max supported rows(14) */
+	movl	%eax, (%esi)		/* write max row pattern at max row adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write row 13 wrap adr */
+	movl	$ROW13_ADR, %esi	/* set address to 13 row wrap address */
+	movl	$ROW13_DATA, %eax	/* pattern for 13 row wrap */
+	movl	%eax, (%esi)		/* write 13 row pattern @ 13 row wrap adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write row 12 wrap adr */
+	movl	$ROW12_ADR, %esi	/* set address to 12 row wrap address */
+	movl	$ROW12_DATA, %eax	/* pattern for 12 row wrap */
+	movl	%eax, (%esi)		/* write 12 row pattern @ 12 row wrap adr */
+	movl	(%esi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/* write row 11 wrap adr */
+	movl	$ROW11_ADR, %edi	/* set address to 11 row wrap address */
+	movl	$ROW11_DATA, %eax	/* pattern for 11 row wrap */
+	movl	%eax, (%edi)		/* write 11 row pattern @ 11 row wrap adr */
+	movl	(%edi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
 
-	movl    $COL10_ADR, %esi         /* set address to 10 col wrap address */
-	movl    $COL10_DATA, %eax        /* pattern for 10 col wrap */
-	movl    %eax, (%esi)             /* write 10 col pattern @ 10 col wrap adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write col 9 wrap adr
-  */
-	movl    $COL09_ADR, %esi         /* set address to 9 col wrap address */
-	movl    $COL09_DATA, %eax        /* pattern for 9 col wrap */
-	movl    %eax, (%esi)             /* write 9 col pattern @ 9 col wrap adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write col 8 wrap adr
-  */
-	movl    $COL08_ADR, %esi         /* set address to min(8) col wrap address */
-	movl    $COL08_DATA, %eax        /* pattern for min (8) col wrap */
-	movl    %eax, (%esi)             /* write min col pattern @ min col adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write row 14 wrap adr
-  */
-	movl    $ROW14_ADR, %esi         /* set address to max row (14) wrap addr */
-	movl    $ROW14_DATA, %eax        /* pattern for max supported rows(14) */
-	movl    %eax, (%esi)             /* write max row pattern at max row adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write row 13 wrap adr
-  */
-	movl    $ROW13_ADR, %esi         /* set address to 13 row wrap address */
-	movl    $ROW13_DATA, %eax        /* pattern for 13 row wrap */
-	movl    %eax, (%esi)             /* write 13 row pattern @ 13 row wrap adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write row 12 wrap adr
-  */
-	movl    $ROW12_ADR, %esi         /* set address to 12 row wrap address */
-	movl    $ROW12_DATA, %eax        /* pattern for 12 row wrap */
-	movl    %eax, (%esi)             /* write 12 row pattern @ 12 row wrap adr */
-	movl    (%esi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write row 11 wrap adr
-  */
-	movl    $ROW11_ADR, %edi         /* set address to 11 row wrap address */
-	movl    $ROW11_DATA, %eax        /* pattern for 11 row wrap */
-	movl    %eax, (%edi)             /* write 11 row pattern @ 11 row wrap adr */
-	movl    (%edi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * write row 10 wrap adr --- this write is really to determine number of banks
-  */
-	movl    $ROW10_ADR, %edi         /* set address to 10 row wrap address */
-	movl    $ROW10_DATA, %eax        /* pattern for 10 row wrap (AA) */
-	movl    %eax, (%edi)             /* write 10 row pattern @ 10 row wrap adr */
-	movl    (%edi), %ebx             /* optional read */
-	cmpl    %ebx,%eax                /* to verify write */
-	jnz     bad_ram                  /* this ram is bad */
- /*
-  * read data @ row 12 wrap adr to determine  * banks,
-  * and read data @ row 14 wrap adr to determine  * rows.
-  * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
-  * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
-  * if data @ row 12 wrap == 11 or 12, we have 4 banks,
-  */
-	xorw    %di,%di                  /* value for 2 banks in DI */
-	movl    (%esi), %ebx             /* read from 12 row wrap to check banks
-					  * (esi is setup from the write to row 12 wrap) */
-	cmpl    %ebx,%eax                /* check for AA pattern  (eax holds the aa pattern) */
-	jz      only2                    /* if pattern == AA, we only have 2 banks */
+	/*
+	 * write row 10 wrap adr --- this write is really to determine
+	 * number of banks
+	 */
+	movl	$ROW10_ADR, %edi	/* set address to 10 row wrap address */
+	movl	$ROW10_DATA, %eax	/* pattern for 10 row wrap (AA) */
+	movl	%eax, (%edi)		/* write 10 row pattern @ 10 row wrap adr */
+	movl	(%edi), %ebx		/* optional read */
+	cmpl	%ebx, %eax		/* to verify write */
+	jnz	bad_ram			/* this ram is bad */
+
+	/*
+	 * read data @ row 12 wrap adr to determine  * banks,
+	 * and read data @ row 14 wrap adr to determine  * rows.
+	 * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+	 * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+	 * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+	 */
+	xorw	%di, %di		/* value for 2 banks in DI */
+	movl	(%esi), %ebx		/* read from 12 row wrap to check banks */
+					/* (esi is setup from the write to row 12 wrap) */
+	cmpl	%ebx, %eax		/* check for AA pattern  (eax holds the aa pattern) */
+	jz	only2			/* if pattern == AA, we only have 2 banks */
 
 	/* 4 banks */
 
-	movw    $8,%di                   /* value for 4 banks in DI (BNK_CNT bit) */
-	cmpl    $ROW11_DATA, %ebx        /* only other legitimate values are 11 */
-	jz      only2
-	cmpl    $ROW12_DATA, %ebx        /* and 12 */
-	jnz     bad_ram                  /* its bad if not 11 or 12! */
+	movw	$0x008, %di		/* value for 4 banks in DI (BNK_CNT bit) */
+	cmpl	$ROW11_DATA, %ebx	/* only other legitimate values are 11 */
+	jz	only2
+	cmpl	$ROW12_DATA, %ebx	/* and 12 */
+	jnz	bad_ram			/* its bad if not 11 or 12! */
 
 	/* fall through */
 only2:
  /*
   * validate row mask
   */
-	movl    $ROW14_ADR, %esi         /* set address back to max row wrap addr */
-	movl    (%esi), %eax             /* read actual number of rows @ row14 adr */
+	movl	$ROW14_ADR, %esi	/* set address back to max row wrap addr */
+	movl	(%esi), %eax		/* read actual number of rows @ row14 adr */
 
-	cmpl    $ROW11_DATA, %eax        /* row must be greater than 11 pattern */
-	jb      bad_ram
+	cmpl	$ROW11_DATA, %eax	/* row must be greater than 11 pattern */
+	jb	bad_ram
 
-	cmpl    $ROW14_DATA, %eax        /* and row must be less than 14 pattern */
-	ja      bad_ram
+	cmpl	$ROW14_DATA, %eax	/* and row must be less than 14 pattern */
+	ja	bad_ram
+
+	cmpb	%ah, %al		/* verify all 4 bytes of dword same */
+	jnz	bad_ram
+	movl	%eax, %ebx
+	shrl	$16, %ebx
+	cmpw	%bx, %ax
+	jnz	bad_ram
+
+	/*
+	 * read col 11 wrap adr for real column data value
+	 */
+	movl	$COL11_ADR, %esi	/* set address to max col (11) wrap addr */
+	movl	(%esi), %eax		/* read real col number at max col adr */
+
+	/*
+	 * validate column data
+	 */
+	cmpl	$COL08_DATA, %eax	/* col must be greater than 8 pattern */
+	jb	bad_ram
+
+	cmpl	$COL11_DATA, %eax	/* and row must be less than 11 pattern */
+	ja	bad_ram
+
+	subl	$COL08_DATA, %eax	/* normalize column data to zero */
+	jc	bad_ram
+	cmpb	%ah, %al		/* verify all 4 bytes of dword equal */
+	jnz	bad_ram
+	movl	%eax, %edx
+	shrl	$16, %edx
+	cmpw	%dx, %ax
+	jnz	bad_ram
+
+	/*
+	 * merge bank and col data together
+	 */
+	addw	%di, %dx		/* merge of bank and col info in dl */
+
+	/*
+	 * fix ending addr mask based upon col info
+	 */
+	movb	$0x03, %al
+	subb	%dh, %al		/* dh contains the overflow from the bank/col merge  */
+	movb	%bl, %dh		/* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
+	xchgw	%cx, %ax		/* cx = ax = 3 or 2 depending on 2 or 4 bank device */
+	shrb	%cl, %dh
+	incb	%dh			/* ending addr is 1 greater than real end */
+	xchgw	%cx, %ax		/* cx is bank number again */
 
-	cmpb    %ah,%al                  /* verify all 4 bytes of dword same */
-	jnz     bad_ram
-	movl    %eax,%ebx
-	shrl    $16,%ebx
-	cmpw    %bx,%ax
-	jnz     bad_ram
- /*
-  * read col 11 wrap adr for real column data value
-  */
-	movl    $COL11_ADR, %esi         /* set address to max col (11) wrap addr */
-	movl    (%esi), %eax             /* read real col number at max col adr */
- /*
-  * validate column data
-  */
-	cmpl    $COL08_DATA, %eax        /* col must be greater than 8 pattern */
-	jb      bad_ram
-
-	cmpl    $COL11_DATA, %eax        /* and row must be less than 11 pattern */
-	ja      bad_ram
-
-	subl    $COL08_DATA, %eax        /* normalize column data to zero */
-	jc      bad_ram
-	cmpb    %ah,%al                  /* verify all 4 bytes of dword equal */
-	jnz     bad_ram
-	movl    %eax,%edx
-	shrl    $16,%edx
-	cmpw    %dx,%ax
-	jnz     bad_ram
- /*
-  * merge bank and col data together
-  */
-	addw    %di,%dx                  /* merge of bank and col info in dl */
- /*
-  * fix ending addr mask based upon col info
-  */
-	movb    $3,%al
-	subb    %dh,%al                  /* dh contains the overflow from the bank/col merge  */
-	movb    %bl,%dh                  /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
-	xchgw   %cx,%ax                  /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
-	shrb    %cl,%dh	                 /*  */
-	incb    %dh                      /* ending addr is 1 greater than real end */
-	xchgw   %cx,%ax                  /* cx is bank number again */
- /*
-  * issue all banks precharge
-  */
 bad_reint:
-	movl    $DRCCTL, %esi            /* setup DRAM control register with */
-	movb    $0x2,%al                 /* All banks precharge */
-	movb     %al, (%esi)
-	movl    $CACHELINESZ, %esi       /* address to init read buffer */
-	movw     %ax, (%esi)
+	/*
+	 * issue all banks precharge
+	 */
+	movl	$DRCCTL, %esi		/* setup DRAM control register with */
+	movb	$0x02, %al		/* All banks precharge */
+	movb	%al, (%esi)
+	movl	$CACHELINESZ, %esi	/* address to init read buffer */
+	movw	%ax, (%esi)
 
- /*
-  * update ENDING ADDRESS REGISTER
-  */
-	movl    $DRCBENDADR, %edi        /* DRAM ending address register */
-	movl    %ecx,%ebx
+	/*
+	 * update ENDING ADDRESS REGISTER
+	 */
+	movl	$DRCBENDADR, %edi	/* DRAM ending address register */
+	movl	%ecx, %ebx
 	addl	%ebx, %edi
-	movb    %dh, (%edi)
- /*
-  * update CONFIG REGISTER
-  */
-	xorb    %dh,%dh
-	movw    $0x00f,%bx
-	movw    %cx,%ax
-	shlw    $2,%ax
-	xchgw   %cx,%ax
-	shlw    %cl,%dx
-	shlw    %cl,%bx
-	notw    %bx
-	xchgw   %cx,%ax
-	movl    $DRCCFG, %edi
-	mov     (%edi), %ax
-	andw    %bx,%ax
-	orw     %dx,%ax
-	movw    %ax, (%edi)
-	jcxz    cleanup
-
-	decw    %cx
-	movl    %ecx,%ebx
-	movl    $DRCBENDADR, %edi        /* DRAM ending address register */
-	movb    $0xff,%al
+	movb	%dh, (%edi)
+
+	/*
+	 * update CONFIG REGISTER
+	 */
+	xorb	%dh, %dh
+	movw	$0x000f, %bx
+	movw	%cx, %ax
+	shlw	$2, %ax
+	xchgw	%cx, %ax
+	shlw	%cl, %dx
+	shlw	%cl, %bx
+	notw	%bx
+	xchgw	%cx, %ax
+	movl	$DRCCFG, %edi
+	movw	(%edi), %ax
+	andw	%bx, %ax
+	orw	%dx, %ax
+	movw	%ax, (%edi)
+	jcxz	cleanup
+
+	decw	%cx
+	movl	%ecx, %ebx
+	movl	$DRCBENDADR, %edi	/* DRAM ending address register */
+	movb	$0xff, %al
 	addl	%ebx, %edi
-	movb    %al, (%edi)
- /*
-  * set control register to NORMAL mode
-  */
-	movl    $DRCCTL, %esi            /* setup DRAM control register with */
-	movb    $0x0,%al                 /* Normal mode value */
-	movb    %al, (%esi)
-	movl    $CACHELINESZ, %esi       /* address to init read buffer */
-	movw    %ax, (%esi)
-	jmp     nextbank
+	movb	%al, (%edi)
+
+	/*
+	 * set control register to NORMAL mode
+	 */
+	movl	$DRCCTL, %esi		/* setup DRAM control register with */
+	movb	$0x00, %al		/* Normal mode value */
+	movb	%al, (%esi)
+	movl	$CACHELINESZ, %esi	/* address to init read buffer */
+	movw	%ax, (%esi)
+	jmp	nextbank
 
 cleanup:
-	movl    $DRCBENDADR, %edi        /* DRAM ending address register  */
-	movw    $4,%cx
-	xorw    %ax,%ax
+	movl	$DRCBENDADR, %edi	/* DRAM ending address register  */
+	movw	$0x04, %cx
+	xorw	%ax, %ax
 cleanuplp:
-	movb   (%edi), %al
-	orb     %al,%al
-	jz      emptybank
+	movb	(%edi), %al
+	orb	%al, %al
+	jz	emptybank
 
-	addb    %ah,%al
-	jns     nottoomuch
+	addb	%ah, %al
+	jns	nottoomuch
 
-	movb    $0x7f,%al
+	movb	$0x7f, %al
 nottoomuch:
-	movb    %al,%ah
-	orb     $0x80,%al
-	movb    %al, (%edi)
+	movb	%al, %ah
+	orb	$0x80, %al
+	movb	%al, (%edi)
 emptybank:
-	incl    %edi
-	loop    cleanuplp
+	incl	%edi
+	loop	cleanuplp
 
 #if defined CONFIG_SYS_SDRAM_DRCTMCTL
 	/* just have your hardware desinger _GIVE_ you what you need here! */
-	movl    $DRCTMCTL, %edi
-	movb    $CONFIG_SYS_SDRAM_DRCTMCTL,%al
-	movb    %al, (%edi)
+	movl	$DRCTMCTL, %edi
+	movb	$CONFIG_SYS_SDRAM_DRCTMCTL, %al
+	movb	%al, (%edi)
 #else
 #if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
-	/* set the CAS latency now since it is hard to do
-	 * when we run from the RAM */
-	movl    $DRCTMCTL, %edi          /* DRAM timing register */
-	movb    (%edi), %al
+	/*
+	 * Set the CAS latency now since it is hard to do
+	 * when we run from the RAM
+	 */
+	movl	$DRCTMCTL, %edi	/* DRAM timing register */
+	movb	(%edi), %al
 #ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
-	andb    $0xef, %al
+	andb	$0xef, %al
 #endif
 #ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
-	orb     $0x10, %al
+	orb	$0x10, %al
 #endif
-	movb    %al, (%edi)
+	movb	%al, (%edi)
 #endif
 #endif
-	movl    $DRCCTL, %edi            /* DRAM Control register */
-	movb    $0x3,%al                 /* Load mode register cmd */
-	movb     %al, (%edi)
-	movw     %ax, (%esi)
+	movl	$DRCCTL, %edi	/* DRAM Control register */
+	movb	$0x03, %al	/* Load mode register cmd */
+	movb	%al, (%edi)
+	movw	%ax, (%esi)
 
 
-	movl    $DRCCTL, %edi            /* DRAM Control register */
-	movb    $0x18,%al                /*  Enable refresh and NORMAL mode */
-	movb    %al, (%edi)
+	movl	$DRCCTL, %edi	/* DRAM Control register */
+	movb	$0x18, %al	/*  Enable refresh and NORMAL mode */
+	movb	%al, (%edi)
 
-	jmp     dram_done
+	jmp	dram_done
 
 bad_ram:
-	xorl    %edx,%edx
-	xorl    %edi,%edi
-	jmp     bad_reint
+	xorl	%edx, %edx
+	xorl	%edi, %edi
+	jmp	bad_reint
 
 dram_done:
 
@@ -551,17 +534,17 @@ init_ecc:
 	movl	%ebx, %ebp
 
 	/* A nominal memory test: just a byte at each address line */
-	movl    %eax, %ecx
-	shrl    $0x1, %ecx
+	movl	%eax, %ecx
+	shrl	$0x1, %ecx
 	movl	$0x1, %edi
 memtest0:
 	movb	$0xa5, (%edi)
-	cmpb    $0xa5, (%edi)
+	cmpb	$0xa5, (%edi)
 	jne	out
-	shrl	$1, %ecx
-	andl	%ecx,%ecx
+	shrl	$0x1, %ecx
+	andl	%ecx, %ecx
 	jz	set_ecc
-	shll	$1, %edi
+	shll	$0x1, %edi
 	jmp	memtest0
 
 set_ecc:
@@ -570,21 +553,24 @@ set_ecc:
 	xorl	%esi, %esi
 	xorl	%edi, %edi
 	xorl	%eax, %eax
-	shrl	$2, %ecx
+	shrl	$0x2, %ecx
 	cld
 	rep	stosl
-			/* enable read, write buffers */
-	movb    $0x11, %al
-	movl    $DBCTL, %edi
-	movb    %al, (%edi)
-			/* enable NMI mapping for ECC */
-	movl    $ECCINT, %edi
-	mov	$0x10, %al
-	movb    %al, (%edi)
-			/* Turn on ECC */
-	movl    $ECCCTL, %edi
-	mov	$0x05, %al
-	movb    %al, (%edi)
+
+	/* enable read, write buffers */
+	movb	$0x11, %al
+	movl	$DBCTL, %edi
+	movb	%al, (%edi)
+
+	/* enable NMI mapping for ECC */
+	movl	$ECCINT, %edi
+	movb	$0x10, %al
+	movb	%al, (%edi)
+
+	/* Turn on ECC */
+	movl	$ECCCTL, %edi
+	movb	$0x05, %al
+	movb	%al,(%edi)
 #endif
 
 out:
@@ -596,7 +582,7 @@ out:
  */
 .globl get_mem_size
 get_mem_size:
-	movl    $DRCBENDADR, %edi        /* DRAM ending address register  */
+	movl	$DRCBENDADR, %edi	/* DRAM ending address register */
 
 bank0:	movl	(%edi), %eax
 	movl	%eax, %ecx
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index 3cea04b4ce..f67a1b7a6e 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -45,7 +45,7 @@ _i386boot_start:
 
 	/* Turn of cache (this might require a 486-class CPU) */
 	movl	%cr0, %eax
-	orl	$0x60000000,%eax
+	orl	$0x60000000, %eax
 	movl	%eax, %cr0
 	wbinvd
 
@@ -54,13 +54,13 @@ _i386boot_start:
 _start:
 	/* This is the 32-bit cold-reset entry point */
 
-	movl    $0x18,%eax	/* Load our segement registes, the
+	movl	$0x18, %eax	/* Load our segement registes, the
 				 * gdt have already been loaded by start16.S */
-	movw    %ax,%fs
-	movw	%ax,%ds
-	movw    %ax,%gs
-	movw    %ax,%es
-	movw    %ax,%ss
+	movw	%ax, %fs
+	movw	%ax, %ds
+	movw	%ax, %gs
+	movw	%ax, %es
+	movw	%ax, %ss
 
 	/* Clear the interupt vectors */
 	lidt	blank_idt_ptr
@@ -79,7 +79,7 @@ _start:
 	 * to store the return address */
 
 	/* Early platform init (setup gpio, etc ) */
-	mov     $early_board_init_ret, %ebp
+	mov	$early_board_init_ret, %ebp
 	jmp	early_board_init
 early_board_init_ret:
 
@@ -92,12 +92,12 @@ early_board_init_ret:
 
 	/* size memory */
 	mov	$mem_init_ret, %ebp
-	jmp     mem_init
+	jmp	mem_init
 mem_init_ret:
 
 	/* fetch memory size (into %eax) */
 	mov	$get_mem_size_ret, %ebp
-	jmp     get_mem_size
+	jmp	get_mem_size
 get_mem_size_ret:
 
 	/* Check we have enough memory for stack */
@@ -113,7 +113,7 @@ get_mem_size_ret:
 	jmp	die
 mem_ok:
 	/* Set stack pointer to upper memory limit*/
-	movl    %eax, %esp
+	movl	%eax, %esp
 
 	/* indicate progress */
 	movw	$0x02, %ax
@@ -150,12 +150,12 @@ stack_ok:
 	wbinvd
 
 	/* Get upper memory limit */
-	movl %esp, %ecx
-	subl $CONFIG_SYS_STACK_SIZE, %ecx
+	movl	%esp, %ecx
+	subl	$CONFIG_SYS_STACK_SIZE, %ecx
 
 	/* Create a Stack Frame */
-	pushl %ebp
-	movl %esp, %ebp
+	pushl	%ebp
+	movl	%esp, %ebp
 
 	/* stack_limit parameter */
 	pushl	%ecx
diff --git a/arch/i386/cpu/start16.S b/arch/i386/cpu/start16.S
index ebe5835841..2a5cca9d69 100644
--- a/arch/i386/cpu/start16.S
+++ b/arch/i386/cpu/start16.S
@@ -31,7 +31,8 @@
 .code16
 .globl start16
 start16:
-	/* First we let the BSP do some early initialization
+	/*
+	 * First we let the BSP do some early initialization
 	 * this code have to map the flash to its final position
 	 */
 	mov	$board_init16_ret, %bp
@@ -40,7 +41,7 @@ board_init16_ret:
 
 	/* Turn of cache (this might require a 486-class CPU) */
 	movl	%cr0, %eax
-	orl	$0x60000000,%eax
+	orl	$0x60000000, %eax
 	movl	%eax, %cr0
 	wbinvd
 
@@ -50,7 +51,7 @@ o32 cs	lgdt	gdt_ptr
 
 	/* Now, we enter protected mode */
 	movl	%cr0, %eax
-	orl	$1,%eax
+	orl	$1, %eax
 	movl	%eax, %cr0
 
 	/* Flush the prefetch queue */
@@ -61,7 +62,7 @@ ff:
 
 	/* Finally jump to the 32bit initialization code */
 	movw	$code32start, %ax
-	movw	%ax,%bp
+	movw	%ax, %bp
 o32 cs	ljmp	*(%bp)
 
 	/* 48-bit far pointer */