Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged

Conflicts:
	README
	arch/arm/cpu/armv7/exynos/clock.c
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

17 files changed, 417 insertions, 6 deletions

diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c
index bfea6abeb0..4ff19c37ef 100644
--- a/arch/arm/cpu/arm926ejs/mxs/clock.c
+++ b/arch/arm/cpu/arm926ejs/mxs/clock.c
@@ -333,6 +333,8 @@ uint32_t mxc_get_clock(enum mxc_clock clk)
 		return mx28_get_sspclk(MXC_SSPCLK2);
 	case MXC_SSP3_CLK:
 		return mx28_get_sspclk(MXC_SSPCLK3);
+	case MXC_XTAL_CLK:
+		return XTAL_FREQ_KHZ * 1000;
 	}
 
 	return 0;
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123cd21..da5bc73185 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
 	/* Not yet implemented */
 	return;
 }
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)AM335X_USB1_OTG_BASE);
+#endif
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb657c..0b4cb4e529 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
 #define CLK_MODE_MASK		0xfffffff8
 #define CLK_DIV_SEL		0xFFFFFFE0
 #define CPGMAC0_IDLE		0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
 	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
 		;
+
+	/* MUSB */
+	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
 
 	while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
 		;
+
+	writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
 }
 
 void ddr_pll_config(unsigned int ddrpll_m)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index fe61f88af4..c6c66814e5 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -919,6 +919,20 @@ static int exynos5_set_spi_clk(enum periph_id periph_id,
 	clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift);
 
 	return 0;
+
+static unsigned long exynos4_get_i2c_clk(void)
+{
+	struct exynos4_clock *clk =
+		(struct exynos4_clock *)samsung_get_base_clock();
+	unsigned long sclk, aclk_100;
+	unsigned int ratio;
+
+	sclk = get_pll_clk(APLL);
+
+	ratio = (readl(&clk->div_top)) >> 4;
+	ratio &= 0xf;
+	aclk_100 = sclk / (ratio + 1);
+	return aclk_100;
 }
 
 unsigned long get_pll_clk(int pllreg)
@@ -941,6 +955,8 @@ unsigned long get_i2c_clk(void)
 {
 	if (cpu_is_exynos5()) {
 		return exynos5_get_i2c_clk();
+	} else if (cpu_is_exynos4()) {
+		return exynos4_get_i2c_clk();
 	} else {
 		debug("I2C clock is not set for this CPU\n");
 		return 0;
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index f02f441a8b..b479965743 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -385,6 +385,68 @@ static int exynos4_pinmux_config(int peripheral, int flags)
 	return 0;
 }
 
+static void exynos4_i2c_config(int peripheral, int flags)
+{
+	struct exynos4_gpio_part1 *gpio1 =
+		(struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1();
+
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+		s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C1:
+		s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
+		break;
+	case PERIPH_ID_I2C2:
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C3:
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C4:
+		s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C5:
+		s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
+		break;
+	case PERIPH_ID_I2C6:
+		s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
+		break;
+	case PERIPH_ID_I2C7:
+		s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
+		break;
+	}
+}
+
+static int exynos4_pinmux_config(int peripheral, int flags)
+{
+	switch (peripheral) {
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		exynos4_i2c_config(peripheral, flags);
+		break;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	}
+
+	return 0;
+}
+
 int exynos_pinmux_config(int peripheral, int flags)
 {
 	if (cpu_is_exynos5())
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index ac597be25a..de167eea56 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -38,6 +38,7 @@ endif
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= emac.o
 COBJS-$(CONFIG_EMIF4)	+= emif4.o
 COBJS-$(CONFIG_SDRC)	+= sdrc.o
+COBJS-$(CONFIG_USB_MUSB_AM35X)	+= am35x_musb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c
new file mode 100644
index 0000000000..7183c4f248
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c
@@ -0,0 +1,75 @@
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(void)
+{
+	/* Reset the musb interface */
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			0, USBOTGSS_SW_RST);
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long start = get_timer(0);
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+				CONF2_PHY_PLLON);
+
+		debug("Waiting for PHY clock good...\n");
+		while (!(readl(&am35x_scm_general_regs->devconf2)
+				& CONF2_PHYCLKGD)) {
+
+			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+				printf("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_PHY_PLLON,
+				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+			0, USBOTGSS_INT_CLR);
+	readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
+
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 819fd2f026..d6c038e3ae 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -82,7 +82,8 @@ struct cm_wkuppll {
 	unsigned int clkseldpllcore;	/* offset 0x68 */
 	unsigned int resv9[1];
 	unsigned int idlestdpllper;	/* offset 0x70 */
-	unsigned int resv10[3];
+	unsigned int resv10[2];
+	unsigned int clkdcoldodpllper;	/* offset 0x7c */
 	unsigned int divm4dpllcore;	/* offset 0x80 */
 	unsigned int divm5dpllcore;	/* offset 0x84 */
 	unsigned int clkmoddpllmpu;	/* offset 0x88 */
@@ -275,12 +276,16 @@ struct ctrl_stat {
 /* Control Device Register */
 struct ctrl_dev {
 	unsigned int deviceid;		/* offset 0x00 */
-	unsigned int resv1[11];
+	unsigned int resv1[7];
+	unsigned int usb_ctrl0;		/* offset 0x20 */
+	unsigned int resv2;
+	unsigned int usb_ctrl1;		/* offset 0x28 */
+	unsigned int resv3;
 	unsigned int macid0l;		/* offset 0x30 */
 	unsigned int macid0h;		/* offset 0x34 */
 	unsigned int macid1l;		/* offset 0x38 */
 	unsigned int macid1h;		/* offset 0x3c */
-	unsigned int resv2[4];
+	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
 };
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 5bd4bc8722..24ab365ea3 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -87,4 +87,8 @@
 /* RTC base address */
 #define AM335X_RTC_BASE			0x44E3E000
 
+/* OTG */
+#define AM335X_USB0_OTG_BASE		0x47401000
+#define AM335X_USB1_OTG_BASE		0x47401800
+
 #endif /* __AM33XX_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index d1b2ea8023..f06af2eb85 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -28,6 +28,8 @@
 #define EXYNOS4_ADDR_BASE		0x10000000
 
 /* EXYNOS4 */
+#define EXYNOS4_I2C_SPACING		0x10000
+
 #define EXYNOS4_GPIO_PART3_BASE		0x03860000
 #define EXYNOS4_PRO_ID			0x10000000
 #define EXYNOS4_SYSREG_BASE		0x10010000
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
new file mode 100644
index 0000000000..8acdf9b725
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DWMCI_CLKSEL		0x09C
+#define DWMCI_SHIFT_0		0x0
+#define DWMCI_SHIFT_1		0x1
+#define DWMCI_SHIFT_2		0x2
+#define DWMCI_SHIFT_3		0x3
+#define DWMCI_SET_SAMPLE_CLK(x)	(x)
+#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+
+int exynos_dwmci_init(u32 regbase, int bus_width, int index);
+
+static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	return exynos_dwmci_init(base, bus_width, index);
+}
diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h
index 1700fe3915..3d39ef235d 100644
--- a/arch/arm/include/asm/arch-mxs/clock.h
+++ b/arch/arm/include/asm/arch-mxs/clock.h
@@ -35,6 +35,7 @@ enum mxc_clock {
 	MXC_SSP1_CLK,
 	MXC_SSP2_CLK,
 	MXC_SSP3_CLK,
+	MXC_XTAL_CLK,
 };
 
 enum mxs_ioclock {
diff --git a/arch/arm/include/asm/arch-omap3/am35x_def.h b/arch/arm/include/asm/arch-omap3/am35x_def.h
index bbaf1bc97b..67698bc7ef 100644
--- a/arch/arm/include/asm/arch-omap3/am35x_def.h
+++ b/arch/arm/include/asm/arch-omap3/am35x_def.h
@@ -32,9 +32,34 @@
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 
+/* LVL_INTR_CLEAR bits */
+#define USBOTGSS_INT_CLR	(1 << 4)
+
 /* IP_SW_RESET bits */
+#define USBOTGSS_SW_RST		(1 << 0)	/* reset USBOTG */
 #define CPGMACSS_SW_RST		(1 << 1)	/* reset CPGMAC */
 
+/* DEVCONF2 bits */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
 /* General register mappings of system control module */
 #define AM35X_SCM_GEN_BASE	0x48002270
 struct am35x_scm_general {
@@ -49,6 +74,8 @@ struct am35x_scm_general {
 };
 #define am35x_scm_general_regs ((struct am35x_scm_general *)AM35X_SCM_GEN_BASE)
 
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+
 #endif /*__ASSEMBLY__ */
 #endif /* __KERNEL_STRICT_NAMES */
 
diff --git a/arch/arm/include/asm/arch-omap3/musb.h b/arch/arm/include/asm/arch-omap3/musb.h
new file mode 100644
index 0000000000..423ac500f4
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/musb.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * Ilya Yanok, <ilya.yanok@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef __ASM_ARCH_OMAP3_MUSB_H
+#define __ASM_ARCH_OMAP3_MUSB_H
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+#endif
diff --git a/arch/arm/include/asm/imx-common/mx5_video.h b/arch/arm/include/asm/imx-common/mx5_video.h
new file mode 100644
index 0000000000..e54c25a560
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/mx5_video.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/omap_musb.h b/arch/arm/include/asm/omap_musb.h
new file mode 100644
index 0000000000..b04d8650ef
--- /dev/null
+++ b/arch/arm/include/asm/omap_musb.h
@@ -0,0 +1,32 @@
+/*
+ * Board data structure for musb gadget on OMAPs
+ *
+ * Copyright (C) 2012, Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_OMAP_MUSB_H
+#define __ASM_ARM_OMAP_MUSB_H
+
+extern struct musb_platform_ops musb_dsps_ops;
+extern const struct musb_platform_ops am35x_ops;
+extern const struct musb_platform_ops omap2430_ops;
+
+struct omap_musb_board_data {
+	u8 interface_type;
+	void (*set_phy_power)(u8 on);
+	void (*clear_irq)(void);
+	void (*reset)(void);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+#endif /* __ASM_ARM_OMAP_MUSB_H */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 92cad9a6eb..e0cb6353a3 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -224,6 +224,13 @@ int __arch_cpu_init(void)
 int arch_cpu_init(void)
 	__attribute__((weak, alias("__arch_cpu_init")));
 
+int __power_init_board(void)
+{
+	return 0;
+}
+int power_init_board(void)
+	__attribute__((weak, alias("__power_init_board")));
+
 init_fnc_t *init_sequence[] = {
 	arch_cpu_init,		/* basic arch cpu dependent setup */
 
@@ -525,6 +532,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #ifdef CONFIG_ARCH_EARLY_INIT_R
 	arch_early_init_r();
 #endif
+	power_init_board();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts("Flash: ");
@@ -532,15 +540,13 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	flash_size = flash_init();
 	if (flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-		char *s = getenv("flashchecksum");
-
 		print_size(flash_size, "");
 		/*
 		 * Compute and print flash CRC if flashchecksum is set to 'y'
 		 *
 		 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
 		 */
-		if (s && (*s == 'y')) {
+		if (getenv_yesno("flashchecksum") == 1) {
 			printf("  CRC: %08X", crc32(0,
 				(const unsigned char *) CONFIG_SYS_FLASH_BASE,
 				flash_size));