Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

12 files changed, 333 insertions, 3 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123cd21..da5bc73185 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
 	/* Not yet implemented */
 	return;
 }
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)AM335X_USB1_OTG_BASE);
+#endif
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb657c..0b4cb4e529 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
 #define CLK_MODE_MASK		0xfffffff8
 #define CLK_DIV_SEL		0xFFFFFFE0
 #define CPGMAC0_IDLE		0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
 	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
 		;
+
+	/* MUSB */
+	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
 
 	while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
 		;
+
+	writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
 }
 
 void ddr_pll_config(unsigned int ddrpll_m)
diff --git a/arch/arm/cpu/armv7/omap3/Makefile b/arch/arm/cpu/armv7/omap3/Makefile
index ac597be25a..de167eea56 100644
--- a/arch/arm/cpu/armv7/omap3/Makefile
+++ b/arch/arm/cpu/armv7/omap3/Makefile
@@ -38,6 +38,7 @@ endif
 COBJS-$(CONFIG_DRIVER_TI_EMAC)	+= emac.o
 COBJS-$(CONFIG_EMIF4)	+= emif4.o
 COBJS-$(CONFIG_SDRC)	+= sdrc.o
+COBJS-$(CONFIG_USB_MUSB_AM35X)	+= am35x_musb.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap3/am35x_musb.c b/arch/arm/cpu/armv7/omap3/am35x_musb.c
new file mode 100644
index 0000000000..7183c4f248
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/am35x_musb.c
@@ -0,0 +1,75 @@
+/*
+ * This file configures the internal USB PHY in AM35X.
+ *
+ * Copyright (C) 2012 Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * Based on omap_phy_internal.c code from Linux by
+ * Hema HK <hemahk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/am35x_def.h>
+
+void am35x_musb_reset(void)
+{
+	/* Reset the musb interface */
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			0, USBOTGSS_SW_RST);
+	clrsetbits_le32(&am35x_scm_general_regs->ip_sw_reset,
+			USBOTGSS_SW_RST, 0);
+}
+
+void am35x_musb_phy_power(u8 on)
+{
+	unsigned long start = get_timer(0);
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN,
+				CONF2_PHY_PLLON);
+
+		debug("Waiting for PHY clock good...\n");
+		while (!(readl(&am35x_scm_general_regs->devconf2)
+				& CONF2_PHYCLKGD)) {
+
+			if (get_timer(start) > CONFIG_SYS_HZ / 10) {
+				printf("musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+				CONF2_PHY_PLLON,
+				CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+	}
+}
+
+void am35x_musb_clear_irq(void)
+{
+	clrsetbits_le32(&am35x_scm_general_regs->lvl_intr_clr,
+			0, USBOTGSS_INT_CLR);
+	readl(&am35x_scm_general_regs->lvl_intr_clr);
+}
+
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 819fd2f026..d6c038e3ae 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -82,7 +82,8 @@ struct cm_wkuppll {
 	unsigned int clkseldpllcore;	/* offset 0x68 */
 	unsigned int resv9[1];
 	unsigned int idlestdpllper;	/* offset 0x70 */
-	unsigned int resv10[3];
+	unsigned int resv10[2];
+	unsigned int clkdcoldodpllper;	/* offset 0x7c */
 	unsigned int divm4dpllcore;	/* offset 0x80 */
 	unsigned int divm5dpllcore;	/* offset 0x84 */
 	unsigned int clkmoddpllmpu;	/* offset 0x88 */
@@ -275,12 +276,16 @@ struct ctrl_stat {
 /* Control Device Register */
 struct ctrl_dev {
 	unsigned int deviceid;		/* offset 0x00 */
-	unsigned int resv1[11];
+	unsigned int resv1[7];
+	unsigned int usb_ctrl0;		/* offset 0x20 */
+	unsigned int resv2;
+	unsigned int usb_ctrl1;		/* offset 0x28 */
+	unsigned int resv3;
 	unsigned int macid0l;		/* offset 0x30 */
 	unsigned int macid0h;		/* offset 0x34 */
 	unsigned int macid1l;		/* offset 0x38 */
 	unsigned int macid1h;		/* offset 0x3c */
-	unsigned int resv2[4];
+	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
 };
 #endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 5bd4bc8722..24ab365ea3 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -87,4 +87,8 @@
 /* RTC base address */
 #define AM335X_RTC_BASE			0x44E3E000
 
+/* OTG */
+#define AM335X_USB0_OTG_BASE		0x47401000
+#define AM335X_USB1_OTG_BASE		0x47401800
+
 #endif /* __AM33XX_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
new file mode 100644
index 0000000000..8acdf9b725
--- /dev/null
+++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DWMCI_CLKSEL		0x09C
+#define DWMCI_SHIFT_0		0x0
+#define DWMCI_SHIFT_1		0x1
+#define DWMCI_SHIFT_2		0x2
+#define DWMCI_SHIFT_3		0x3
+#define DWMCI_SET_SAMPLE_CLK(x)	(x)
+#define DWMCI_SET_DRV_CLK(x)	((x) << 16)
+#define DWMCI_SET_DIV_RATIO(x)	((x) << 24)
+
+int exynos_dwmci_init(u32 regbase, int bus_width, int index);
+
+static inline unsigned int exynos_dwmmc_init(int index, int bus_width)
+{
+	unsigned int base = samsung_get_base_mmc() + (0x10000 * index);
+	return exynos_dwmci_init(base, bus_width, index);
+}
diff --git a/arch/arm/include/asm/arch-omap3/am35x_def.h b/arch/arm/include/asm/arch-omap3/am35x_def.h
index bbaf1bc97b..67698bc7ef 100644
--- a/arch/arm/include/asm/arch-omap3/am35x_def.h
+++ b/arch/arm/include/asm/arch-omap3/am35x_def.h
@@ -32,9 +32,34 @@
 #ifndef __KERNEL_STRICT_NAMES
 #ifndef __ASSEMBLY__
 
+/* LVL_INTR_CLEAR bits */
+#define USBOTGSS_INT_CLR	(1 << 4)
+
 /* IP_SW_RESET bits */
+#define USBOTGSS_SW_RST		(1 << 0)	/* reset USBOTG */
 #define CPGMACSS_SW_RST		(1 << 1)	/* reset CPGMAC */
 
+/* DEVCONF2 bits */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
 /* General register mappings of system control module */
 #define AM35X_SCM_GEN_BASE	0x48002270
 struct am35x_scm_general {
@@ -49,6 +74,8 @@ struct am35x_scm_general {
 };
 #define am35x_scm_general_regs ((struct am35x_scm_general *)AM35X_SCM_GEN_BASE)
 
+#define AM35XX_IPSS_USBOTGSS_BASE	0x5C040000
+
 #endif /*__ASSEMBLY__ */
 #endif /* __KERNEL_STRICT_NAMES */
 
diff --git a/arch/arm/include/asm/arch-omap3/musb.h b/arch/arm/include/asm/arch-omap3/musb.h
new file mode 100644
index 0000000000..423ac500f4
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/musb.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2012
+ * Ilya Yanok, <ilya.yanok@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef __ASM_ARCH_OMAP3_MUSB_H
+#define __ASM_ARCH_OMAP3_MUSB_H
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+#endif
diff --git a/arch/arm/include/asm/imx-common/mx5_video.h b/arch/arm/include/asm/imx-common/mx5_video.h
new file mode 100644
index 0000000000..e54c25a560
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/mx5_video.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2012
+ * Anatolij Gustschin, DENX Software Engineering, <agust@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __MX5_VIDEO_H
+#define __MX5_VIDEO_H
+
+#ifdef CONFIG_VIDEO
+void lcd_enable(void);
+void setup_iomux_lcd(void);
+#else
+static inline void lcd_enable(void) { }
+static inline void setup_iomux_lcd(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/omap_musb.h b/arch/arm/include/asm/omap_musb.h
new file mode 100644
index 0000000000..b04d8650ef
--- /dev/null
+++ b/arch/arm/include/asm/omap_musb.h
@@ -0,0 +1,32 @@
+/*
+ * Board data structure for musb gadget on OMAPs
+ *
+ * Copyright (C) 2012, Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARM_OMAP_MUSB_H
+#define __ASM_ARM_OMAP_MUSB_H
+
+extern struct musb_platform_ops musb_dsps_ops;
+extern const struct musb_platform_ops am35x_ops;
+extern const struct musb_platform_ops omap2430_ops;
+
+struct omap_musb_board_data {
+	u8 interface_type;
+	void (*set_phy_power)(u8 on);
+	void (*clear_irq)(void);
+	void (*reset)(void);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+#endif /* __ASM_ARM_OMAP_MUSB_H */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 92cad9a6eb..22a4d9cc0e 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -224,6 +224,13 @@ int __arch_cpu_init(void)
 int arch_cpu_init(void)
 	__attribute__((weak, alias("__arch_cpu_init")));
 
+int __power_init_board(void)
+{
+	return 0;
+}
+int power_init_board(void)
+	__attribute__((weak, alias("__power_init_board")));
+
 init_fnc_t *init_sequence[] = {
 	arch_cpu_init,		/* basic arch cpu dependent setup */
 
@@ -525,6 +532,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #ifdef CONFIG_ARCH_EARLY_INIT_R
 	arch_early_init_r();
 #endif
+	power_init_board();
 
 #if !defined(CONFIG_SYS_NO_FLASH)
 	puts("Flash: ");