ARM: tegra: pinctrl: remove duplication

Much of arch/arm/cpu/tegra*-common/pinmux.c is identical. Remove the
duplication by creating pinmux-common.c for all the identical code.

This leaves:
* arch/arm/include/asm/arch-tegra*/pinmux.h defining only the names of
  the various pins/pin groups, drive groups, and mux functions.
* arch/arm/cpu/tegra*-common/pinmux.c containing only the lookup table
  stating which pin groups support which mux functions.

The code in pinmux-common.c is semantically identical to that in the
various original pinmux.c, but had some consistency and cleanup fixes
applied during migration.

I removed the definition of struct pmux_tri_ctlr, since this is different
between SoCs (especially Tegra20 vs all others), and it's much simpler to
deal with this via the new REG/MUX_REG/... defines. spl.c, warmboot.c,
and warmboot_avp.c needed updates due to this, since they previously
hijacked this struct to encode the location of some non-pinmux registers.
Now, that code simply calculates these register addresses directly using
simple and obvious math. I like this method better irrespective of the
pinmux code cleanup anyway.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

5 files changed, 210 insertions, 698 deletions

diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
new file mode 100644
index 0000000000..e97fffdcf8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -0,0 +1,189 @@
+/*
+ * (C) Copyright 2010-2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef _TEGRA_PINMUX_H_
+#define _TEGRA_PINMUX_H_
+
+#include <asm/arch/tegra.h>
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+	PMUX_PULL_NORMAL = 0,
+	PMUX_PULL_DOWN,
+	PMUX_PULL_UP,
+};
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+	PMUX_TRI_NORMAL = 0,
+	PMUX_TRI_TRISTATE = 1,
+};
+
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+enum pmux_pin_io {
+	PMUX_PIN_OUTPUT = 0,
+	PMUX_PIN_INPUT = 1,
+	PMUX_PIN_NONE,
+};
+
+enum pmux_pin_lock {
+	PMUX_PIN_LOCK_DEFAULT = 0,
+	PMUX_PIN_LOCK_DISABLE,
+	PMUX_PIN_LOCK_ENABLE,
+};
+
+enum pmux_pin_od {
+	PMUX_PIN_OD_DEFAULT = 0,
+	PMUX_PIN_OD_DISABLE,
+	PMUX_PIN_OD_ENABLE,
+};
+
+enum pmux_pin_ioreset {
+	PMUX_PIN_IO_RESET_DEFAULT = 0,
+	PMUX_PIN_IO_RESET_DISABLE,
+	PMUX_PIN_IO_RESET_ENABLE,
+};
+
+#ifdef TEGRA_PMX_HAS_RCV_SEL
+enum pmux_pin_rcv_sel {
+	PMUX_PIN_RCV_SEL_DEFAULT = 0,
+	PMUX_PIN_RCV_SEL_NORMAL,
+	PMUX_PIN_RCV_SEL_HIGH,
+};
+#endif /* TEGRA_PMX_HAS_RCV_SEL */
+#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
+	enum pmux_func func;		/* function to assign FUNC_...      */
+	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
+	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
+	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
+	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
+	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
+#ifdef TEGRA_PMX_HAS_RCV_SEL
+	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
+					/* VIL/VIH receivers */
+#endif
+#endif
+};
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set a pin group to tristate or normal */
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+#endif
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(const struct pingroup_config *config);
+
+/**
+ * Configure a list of pin groups
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void pinmux_config_table(const struct pingroup_config *config, int len);
+
+#ifdef TEGRA_PMX_HAS_PADGRPS
+
+#define PGRP_SLWF_MIN	0
+#define PGRP_SLWF_MAX	3
+#define PGRP_SLWF_NONE	-1
+
+#define PGRP_SLWR_MIN	0
+#define PGRP_SLWR_MAX	3
+#define PGRP_SLWR_NONE	-1
+
+#define PGRP_DRVUP_MIN	0
+#define PGRP_DRVUP_MAX	127
+#define PGRP_DRVUP_NONE	-1
+
+#define PGRP_DRVDN_MIN	0
+#define PGRP_DRVDN_MAX	127
+#define PGRP_DRVDN_NONE	-1
+
+/* Defines a pin group cfg's low-power mode select */
+enum pgrp_lpmd {
+	PGRP_LPMD_X8 = 0,
+	PGRP_LPMD_X4,
+	PGRP_LPMD_X2,
+	PGRP_LPMD_X,
+	PGRP_LPMD_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's schmidt is enabled or not */
+enum pgrp_schmt {
+	PGRP_SCHMT_DISABLE = 0,
+	PGRP_SCHMT_ENABLE = 1,
+	PGRP_SCHMT_NONE = -1,
+};
+
+/* Defines whether a pin group cfg's high-speed mode is enabled or not */
+enum pgrp_hsm {
+	PGRP_HSM_DISABLE = 0,
+	PGRP_HSM_ENABLE = 1,
+	PGRP_HSM_NONE = -1,
+};
+
+/*
+ * This defines the configuration for a pin group's pad control config
+ */
+struct padctrl_config {
+	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
+	int slwf;			/* falling edge slew         */
+	int slwr;			/* rising edge slew          */
+	int drvup;			/* pull-up drive strength    */
+	int drvdn;			/* pull-down drive strength  */
+	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
+	enum pgrp_schmt schmt;		/* schmidt enable            */
+	enum pgrp_hsm hsm;		/* high-speed mode enable    */
+};
+
+/**
+ * Set the GP pad configs
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void padgrp_config_table(const struct padctrl_config *config, int len);
+
+#endif /* TEGRA_PMX_HAS_PADGRPS */
+
+struct tegra_pingroup_desc {
+	enum pmux_func funcs[4];
+#if defined(CONFIG_TEGRA20)
+	u32 ctl_id;
+	u32 pull_id;
+#endif /* CONFIG_TEGRA20 */
+};
+
+extern const struct tegra_pingroup_desc *tegra_soc_pingroups;
+
+#endif /* _TEGRA_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
index a06b24f412..00ef542354 100644
--- a/arch/arm/include/asm/arch-tegra114/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -367,7 +367,7 @@ enum pmux_func {
 	PMUX_FUNC_RESET_OUT_N,
 	/* End of Tegra114 MUX selectors */
 
-	PMUX_FUNC_MAX,
+	PMUX_FUNC_COUNT,
 
 	PMUX_FUNC_INVALID = 0x4000,
 	PMUX_FUNC_RSVD1 = 0x8000,
@@ -376,216 +376,9 @@ enum pmux_func {
 	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
-/* return 1 if a pmux_func is in range */
-#define pmux_func_isvalid(func) ((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) \
-	|| (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+#define TEGRA_PMX_HAS_RCV_SEL
+#define TEGRA_PMX_HAS_PADGRPS
+#include <asm/arch-tegra/pinmux.h>
 
-/* return 1 if a pingrp is in range */
-#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
-
-/* The pullup/pulldown state of a pin group */
-enum pmux_pull {
-	PMUX_PULL_NORMAL = 0,
-	PMUX_PULL_DOWN,
-	PMUX_PULL_UP,
-};
-/* return 1 if a pin_pupd_is in range */
-#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
-				((pupd) <= PMUX_PULL_UP))
-
-/* Defines whether a pin group is tristated or in normal operation */
-enum pmux_tristate {
-	PMUX_TRI_NORMAL = 0,
-	PMUX_TRI_TRISTATE = 1,
-};
-/* return 1 if a pin_tristate_is in range */
-#define pmux_pin_tristate_isvalid(tristate) (((tristate) >= PMUX_TRI_NORMAL) \
-				&& ((tristate) <= PMUX_TRI_TRISTATE))
-
-enum pmux_pin_io {
-	PMUX_PIN_OUTPUT = 0,
-	PMUX_PIN_INPUT = 1,
-	PMUX_PIN_NONE,
-};
-/* return 1 if a pin_io_is in range */
-#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
-				((io) <= PMUX_PIN_INPUT))
-
-enum pmux_pin_lock {
-	PMUX_PIN_LOCK_DEFAULT = 0,
-	PMUX_PIN_LOCK_DISABLE,
-	PMUX_PIN_LOCK_ENABLE,
-};
-/* return 1 if a pin_lock is in range */
-#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
-				((lock) <= PMUX_PIN_LOCK_ENABLE))
-
-enum pmux_pin_od {
-	PMUX_PIN_OD_DEFAULT = 0,
-	PMUX_PIN_OD_DISABLE,
-	PMUX_PIN_OD_ENABLE,
-};
-/* return 1 if a pin_od is in range */
-#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
-				((od) <= PMUX_PIN_OD_ENABLE))
-
-enum pmux_pin_ioreset {
-	PMUX_PIN_IO_RESET_DEFAULT = 0,
-	PMUX_PIN_IO_RESET_DISABLE,
-	PMUX_PIN_IO_RESET_ENABLE,
-};
-/* return 1 if a pin_ioreset_is in range */
-#define pmux_pin_ioreset_isvalid(ioreset) \
-				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
-				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
-
-enum pmux_pin_rcv_sel {
-	PMUX_PIN_RCV_SEL_DEFAULT = 0,
-	PMUX_PIN_RCV_SEL_NORMAL,
-	PMUX_PIN_RCV_SEL_HIGH,
-};
-/* return 1 if a pin_rcv_sel_is in range */
-#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
-				(((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \
-				((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
-
-#define PGRP_SLWF_NONE	-1
-#define PGRP_SLWF_MAX	3
-#define PGRP_SLWR_NONE	PGRP_SLWF_NONE
-#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
-
-#define PGRP_DRVUP_NONE	-1
-#define PGRP_DRVUP_MAX	127
-#define PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
-#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
-
-#define PGRP_SCHMT_NONE	-1
-#define PGRP_HSM_NONE	PGRP_SCHMT_NONE
-
-/* return 1 if a padgrp is in range */
-#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
-
-/* return 1 if a slew-rate rising/falling edge value is in range */
-#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \
-				(((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)))
-
-/* return 1 if a driver output pull-up/down strength code value is in range */
-#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \
-				(((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)))
-
-/* return 1 if a low-power mode value is in range */
-#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \
-				(((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)))
-
-/* Defines a pin group cfg's low-power mode select */
-enum pgrp_lpmd {
-	PGRP_LPMD_X8 = 0,
-	PGRP_LPMD_X4,
-	PGRP_LPMD_X2,
-	PGRP_LPMD_X,
-	PGRP_LPMD_NONE = -1,
-};
-
-/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pgrp_schmt {
-	PGRP_SCHMT_DISABLE = 0,
-	PGRP_SCHMT_ENABLE = 1,
-};
-
-/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pgrp_hsm {
-	PGRP_HSM_DISABLE = 0,
-	PGRP_HSM_ENABLE = 1,
-};
-
-/*
- * This defines the configuration for a pin group's pad control config
- */
-struct padctrl_config {
-	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
-	int slwf;			/* falling edge slew         */
-	int slwr;			/* rising edge slew          */
-	int drvup;			/* pull-up drive strength    */
-	int drvdn;			/* pull-down drive strength  */
-	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
-	enum pgrp_schmt schmt;		/* schmidt enable            */
-	enum pgrp_hsm hsm;		/* high-speed mode enable    */
-};
-
-/* t114 pin drive group and pin mux registers */
-#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
-#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
-				PDRIVE_PINGROUP_COUNT)
-struct pmux_tri_ctlr {
-	uint pmt_reserved0;		/* ABP_MISC_PP_ reserved offset 00 */
-	uint pmt_reserved1;		/* ABP_MISC_PP_ reserved offset 04 */
-	uint pmt_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 08   */
-	uint pmt_reserved2;		/* ABP_MISC_PP_ reserved offset 0C */
-	uint pmt_reserved3;		/* ABP_MISC_PP_ reserved offset 10 */
-	uint pmt_reserved4[4];		/* _TRI_STATE_REG_A/B/C/D in t20 */
-	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
-
-	uint pmt_reserved[528];		/* ABP_MISC_PP_ reserved offs 28-864 */
-
-	uint pmt_drive[PDRIVE_PINGROUP_COUNT];	/* pin drive grps offs 868 */
-	uint pmt_reserved5[PMUX_OFFSET];
-	uint pmt_ctl[PINGRP_COUNT];	/* mux/pupd/tri regs, offset 0x3000 */
-};
-
-/*
- * This defines the configuration for a pin, including the function assigned,
- * pull up/down settings and tristate settings. Having set up one of these
- * you can call pinmux_config_pingroup() to configure a pin in one step. Also
- * available is pinmux_config_table() to configure a list of pins.
- */
-struct pingroup_config {
-	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
-	enum pmux_func func;		/* function to assign FUNC_...      */
-	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
-	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
-	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
-	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
-	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
-	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
-	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
-					/* VIL/VIH receivers */
-};
-
-/* Set a pin group to tristate */
-void pinmux_tristate_enable(enum pmux_pingrp pin);
-
-/* Set a pin group to normal (non tristate) */
-void pinmux_tristate_disable(enum pmux_pingrp pin);
-
-/* Set the pull up/down feature for a pin group */
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
-
-/* Set the mux function for a pin group */
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
-
-/* Set the complete configuration for a pin group */
-void pinmux_config_pingroup(struct pingroup_config *config);
-
-/* Set a pin group to tristate or normal */
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
-
-/* Set a pin group as input or output */
-void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
-
-/**
- * Configure a list of pin groups
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void pinmux_config_table(struct pingroup_config *config, int len);
-
-/**
- * Set the GP pad configs
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void padgrp_config_table(struct padctrl_config *config, int len);
-
-#endif	/* _TEGRA114_PINMUX_H_ */
+#endif /* _TEGRA114_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h
index 900cf44622..2c6f0d8e60 100644
--- a/arch/arm/include/asm/arch-tegra124/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra124/pinmux.h
@@ -374,7 +374,7 @@ enum pmux_func {
 	PMUX_FUNC_RESET_OUT_N,
 	/* End of Tegra114 MUX selectors */
 
-	PMUX_FUNC_MAX,
+	PMUX_FUNC_COUNT,
 
 	PMUX_FUNC_INVALID = 0x4000,
 	PMUX_FUNC_RSVD1 = 0x8000,
@@ -383,213 +383,9 @@ enum pmux_func {
 	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
-/* return 1 if a pmux_func is in range */
-#define pmux_func_isvalid(func) \
-	((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) || \
-	(((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+#define TEGRA_PMX_HAS_RCV_SEL
+#define TEGRA_PMX_HAS_PADGRPS
+#include <asm/arch-tegra/pinmux.h>
 
-/* return 1 if a pingrp is in range */
-#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
-
-/* The pullup/pulldown state of a pin group */
-enum pmux_pull {
-	PMUX_PULL_NORMAL = 0,
-	PMUX_PULL_DOWN,
-	PMUX_PULL_UP,
-};
-/* return 1 if a pin_pupd_is in range */
-#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
-				((pupd) <= PMUX_PULL_UP))
-
-/* Defines whether a pin group is tristated or in normal operation */
-enum pmux_tristate {
-	PMUX_TRI_NORMAL = 0,
-	PMUX_TRI_TRISTATE = 1,
-};
-/* return 1 if a pin_tristate_is in range */
-#define pmux_pin_tristate_isvalid(tristate) \
-	(((tristate) >= PMUX_TRI_NORMAL) && \
-	((tristate) <= PMUX_TRI_TRISTATE))
-
-enum pmux_pin_io {
-	PMUX_PIN_OUTPUT = 0,
-	PMUX_PIN_INPUT = 1,
-	PMUX_PIN_NONE,
-};
-/* return 1 if a pin_io_is in range */
-#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
-				((io) <= PMUX_PIN_INPUT))
-
-enum pmux_pin_lock {
-	PMUX_PIN_LOCK_DEFAULT = 0,
-	PMUX_PIN_LOCK_DISABLE,
-	PMUX_PIN_LOCK_ENABLE,
-};
-/* return 1 if a pin_lock is in range */
-#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
-				((lock) <= PMUX_PIN_LOCK_ENABLE))
-
-enum pmux_pin_od {
-	PMUX_PIN_OD_DEFAULT = 0,
-	PMUX_PIN_OD_DISABLE,
-	PMUX_PIN_OD_ENABLE,
-};
-/* return 1 if a pin_od is in range */
-#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
-				((od) <= PMUX_PIN_OD_ENABLE))
-
-enum pmux_pin_ioreset {
-	PMUX_PIN_IO_RESET_DEFAULT = 0,
-	PMUX_PIN_IO_RESET_DISABLE,
-	PMUX_PIN_IO_RESET_ENABLE,
-};
-/* return 1 if a pin_ioreset_is in range */
-#define pmux_pin_ioreset_isvalid(ioreset) \
-				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
-				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
-
-enum pmux_pin_rcv_sel {
-	PMUX_PIN_RCV_SEL_DEFAULT = 0,
-	PMUX_PIN_RCV_SEL_NORMAL,
-	PMUX_PIN_RCV_SEL_HIGH,
-};
-/* return 1 if a pin_rcv_sel_is in range */
-#define pmux_pin_rcv_sel_isvalid(rcv_sel) \
-				(((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \
-				((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH))
-
-#define PGRP_SLWF_NONE	-1
-#define PGRP_SLWF_MAX	3
-#define PGRP_SLWR_NONE	PGRP_SLWF_NONE
-#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
-
-#define PGRP_DRVUP_NONE	-1
-#define PGRP_DRVUP_MAX	127
-#define PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
-#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
-
-#define PGRP_SCHMT_NONE	-1
-#define PGRP_HSM_NONE	PGRP_SCHMT_NONE
-
-/* return 1 if a padgrp is in range */
-#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
-
-/* return 1 if a slew-rate rising/falling edge value is in range */
-#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \
-				(((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)))
-
-/* return 1 if a driver output pull-up/down strength code value is in range */
-#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \
-				(((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)))
-
-/* return 1 if a low-power mode value is in range */
-#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \
-				(((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)))
-
-/* Defines a pin group cfg's low-power mode select */
-enum pgrp_lpmd {
-	PGRP_LPMD_X8 = 0,
-	PGRP_LPMD_X4,
-	PGRP_LPMD_X2,
-	PGRP_LPMD_X,
-	PGRP_LPMD_NONE = -1,
-};
-
-/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pgrp_schmt {
-	PGRP_SCHMT_DISABLE = 0,
-	PGRP_SCHMT_ENABLE = 1,
-};
-
-/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pgrp_hsm {
-	PGRP_HSM_DISABLE = 0,
-	PGRP_HSM_ENABLE = 1,
-};
-
-/*
- * This defines the configuration for a pin group's pad control config
- */
-struct padctrl_config {
-	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
-	int slwf;			/* falling edge slew         */
-	int slwr;			/* rising edge slew          */
-	int drvup;			/* pull-up drive strength    */
-	int drvdn;			/* pull-down drive strength  */
-	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
-	enum pgrp_schmt schmt;		/* schmidt enable            */
-	enum pgrp_hsm hsm;		/* high-speed mode enable    */
-};
-
-/* Tegra124 pin drive group and pin mux registers */
-#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
-#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
-				PDRIVE_PINGROUP_COUNT)
-struct pmux_tri_ctlr {
-	uint pmt_reserved0[9];		/* ABP_MISC_PP_ offsets 00-20 */
-	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
-
-	uint pmt_reserved[528];		/* ABP_MISC_PP_ reserved offs 28-864 */
-
-	uint pmt_drive[PDRIVE_PINGROUP_COUNT];	/* pin drive grps offs 868 */
-	uint pmt_reserved5[PMUX_OFFSET];
-	uint pmt_ctl[PINGRP_COUNT];	/* mux/pupd/tri regs, offset 0x3000 */
-};
-
-/*
- * This defines the configuration for a pin, including the function assigned,
- * pull up/down settings and tristate settings. Having set up one of these
- * you can call pinmux_config_pingroup() to configure a pin in one step. Also
- * available is pinmux_config_table() to configure a list of pins.
- */
-struct pingroup_config {
-	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
-	enum pmux_func func;		/* function to assign FUNC_...      */
-	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
-	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
-	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
-	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
-	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
-	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
-	enum pmux_pin_rcv_sel rcv_sel;	/* select between High and Normal  */
-					/* VIL/VIH receivers */
-};
-
-/* Set a pin group to tristate */
-void pinmux_tristate_enable(enum pmux_pingrp pin);
-
-/* Set a pin group to normal (non tristate) */
-void pinmux_tristate_disable(enum pmux_pingrp pin);
-
-/* Set the pull up/down feature for a pin group */
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
-
-/* Set the mux function for a pin group */
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
-
-/* Set the complete configuration for a pin group */
-void pinmux_config_pingroup(struct pingroup_config *config);
-
-/* Set a pin group to tristate or normal */
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
-
-/* Set a pin group as input or output */
-void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
-
-/**
- * Configure a list of pin groups
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void pinmux_config_table(struct pingroup_config *config, int len);
-
-/**
- * Set the GP pad configs
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void padgrp_config_table(struct padctrl_config *config, int len);
-
-#endif	/* _TEGRA124_PINMUX_H_ */
+#endif /* _TEGRA124_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h
index 1980201ce8..5517c0783d 100644
--- a/arch/arm/include/asm/arch-tegra20/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra20/pinmux.h
@@ -5,8 +5,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
-#ifndef _PINMUX_H_
-#define _PINMUX_H_
+#ifndef _TEGRA20_PINMUX_H_
+#define _TEGRA20_PINMUX_H_
 
 /*
  * Pin groups which we adjust. There are three basic attributes of each pin
@@ -236,83 +236,6 @@ enum pmux_func {
 	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
-/* return 1 if a pmux_func is in range */
-#define pmux_func_isvalid(func) \
-	((((func) >= 0) && ((func) < PMUX_FUNC_COUNT)) ||\
-	 (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+#include <asm/arch-tegra/pinmux.h>
 
-/* The pullup/pulldown state of a pin group */
-enum pmux_pull {
-	PMUX_PULL_NORMAL = 0,
-	PMUX_PULL_DOWN,
-	PMUX_PULL_UP,
-};
-
-/* Defines whether a pin group is tristated or in normal operation */
-enum pmux_tristate {
-	PMUX_TRI_NORMAL = 0,
-	PMUX_TRI_TRISTATE = 1,
-};
-
-enum {
-	PMUX_TRISTATE_REGS	= 4,
-	PMUX_MUX_REGS		= 7,
-	PMUX_PULL_REGS		= 5,
-};
-
-/* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */
-struct pmux_tri_ctlr {
-	uint pmt_reserved0;		/* ABP_MISC_PP_ reserved offset 00 */
-	uint pmt_reserved1;		/* ABP_MISC_PP_ reserved offset 04 */
-	uint pmt_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 08   */
-	uint pmt_reserved2;		/* ABP_MISC_PP_ reserved offset 0C */
-	uint pmt_reserved3;		/* ABP_MISC_PP_ reserved offset 10 */
-	uint pmt_tri[PMUX_TRISTATE_REGS];/* _TRI_STATE_REG_A/B/C/D_0 14-20 */
-	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
-
-	uint pmt_reserved[22];		/* ABP_MISC_PP_ reserved offs 28-7C */
-
-	uint pmt_ctl[PMUX_MUX_REGS];	/* _PIN_MUX_CTL_A-G_0, offset 80   */
-	uint pmt_reserved4;		/* ABP_MISC_PP_ reserved offset 9c */
-	uint pmt_pull[PMUX_PULL_REGS];	/* APB_MISC_PP_PULLUPDOWN_REG_A-E  */
-};
-
-/*
- * This defines the configuration for a pin, including the function assigned,
- * pull up/down settings and tristate settings. Having set up one of these
- * you can call pinmux_config_pingroup() to configure a pin in one step. Also
- * available is pinmux_config_table() to configure a list of pins.
- */
-struct pingroup_config {
-	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
-	enum pmux_func func;		/* function to assign FUNC_...      */
-	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
-	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
-};
-
-/* Set a pin group to tristate */
-void pinmux_tristate_enable(enum pmux_pingrp pin);
-
-/* Set a pin group to normal (non tristate) */
-void pinmux_tristate_disable(enum pmux_pingrp pin);
-
-/* Set the pull up/down feature for a pin group */
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
-
-/* Set the mux function for a pin group */
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
-
-/* Set the complete configuration for a pin group */
-void pinmux_config_pingroup(const struct pingroup_config *config);
-
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
-
-/**
- * Configuure a list of pin groups
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void pinmux_config_table(const struct pingroup_config *config, int len);
-
-#endif	/* PINMUX_H */
+#endif /* _TEGRA20_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 1449f53b33..e10df76342 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -439,7 +439,7 @@ enum pmux_func {
 	PMUX_FUNC_PWR_INT_N,
 	PMUX_FUNC_CLK_32K_IN,
 
-	PMUX_FUNC_MAX,
+	PMUX_FUNC_COUNT,
 
 	PMUX_FUNC_RSVD1 = 0x8000,
 	PMUX_FUNC_RSVD2 = 0x8001,
@@ -447,197 +447,8 @@ enum pmux_func {
 	PMUX_FUNC_RSVD4 = 0x8003,
 };
 
-/* return 1 if a pmux_func is in range */
-#define pmux_func_isvalid(func) ((((func) >= 0) && ((func) < PMUX_FUNC_MAX)) \
-	|| (((func) >= PMUX_FUNC_RSVD1) && ((func) <= PMUX_FUNC_RSVD4)))
+#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC
+#define TEGRA_PMX_HAS_PADGRPS
+#include <asm/arch-tegra/pinmux.h>
 
-/* return 1 if a pingrp is in range */
-#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
-
-/* The pullup/pulldown state of a pin group */
-enum pmux_pull {
-	PMUX_PULL_NORMAL = 0,
-	PMUX_PULL_DOWN,
-	PMUX_PULL_UP,
-};
-/* return 1 if a pin_pupd_is in range */
-#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
-				((pupd) <= PMUX_PULL_UP))
-
-/* Defines whether a pin group is tristated or in normal operation */
-enum pmux_tristate {
-	PMUX_TRI_NORMAL = 0,
-	PMUX_TRI_TRISTATE = 1,
-};
-/* return 1 if a pin_tristate_is in range */
-#define pmux_pin_tristate_isvalid(tristate) (((tristate) >= PMUX_TRI_NORMAL) \
-				&& ((tristate) <= PMUX_TRI_TRISTATE))
-
-enum pmux_pin_io {
-	PMUX_PIN_OUTPUT = 0,
-	PMUX_PIN_INPUT = 1,
-};
-/* return 1 if a pin_io_is in range */
-#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
-				((io) <= PMUX_PIN_INPUT))
-
-enum pmux_pin_lock {
-	PMUX_PIN_LOCK_DEFAULT = 0,
-	PMUX_PIN_LOCK_DISABLE,
-	PMUX_PIN_LOCK_ENABLE,
-};
-/* return 1 if a pin_lock is in range */
-#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
-				((lock) <= PMUX_PIN_LOCK_ENABLE))
-
-enum pmux_pin_od {
-	PMUX_PIN_OD_DEFAULT = 0,
-	PMUX_PIN_OD_DISABLE,
-	PMUX_PIN_OD_ENABLE,
-};
-/* return 1 if a pin_od is in range */
-#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
-				((od) <= PMUX_PIN_OD_ENABLE))
-
-enum pmux_pin_ioreset {
-	PMUX_PIN_IO_RESET_DEFAULT = 0,
-	PMUX_PIN_IO_RESET_DISABLE,
-	PMUX_PIN_IO_RESET_ENABLE,
-};
-/* return 1 if a pin_ioreset_is in range */
-#define pmux_pin_ioreset_isvalid(ioreset) \
-				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
-				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
-
-#define PGRP_SLWF_NONE	-1
-#define PGRP_SLWF_MAX	3
-#define	PGRP_SLWR_NONE	PGRP_SLWF_NONE
-#define PGRP_SLWR_MAX	PGRP_SLWF_MAX
-
-#define PGRP_DRVUP_NONE	-1
-#define PGRP_DRVUP_MAX	127
-#define	PGRP_DRVDN_NONE	PGRP_DRVUP_NONE
-#define PGRP_DRVDN_MAX	PGRP_DRVUP_MAX
-
-/* return 1 if a padgrp is in range */
-#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT))
-
-/* return 1 if a slew-rate rising/falling edge value is in range */
-#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))
-
-/* return 1 if a driver output pull-up/down strength code value is in range */
-#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))
-
-/* return 1 if a low-power mode value is in range */
-#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))
-
-/* Defines a pin group cfg's low-power mode select */
-enum pgrp_lpmd {
-	PGRP_LPMD_X8 = 0,
-	PGRP_LPMD_X4,
-	PGRP_LPMD_X2,
-	PGRP_LPMD_X,
-	PGRP_LPMD_NONE = -1,
-};
-
-/* Defines whether a pin group cfg's schmidt is enabled or not */
-enum pgrp_schmt {
-	PGRP_SCHMT_DISABLE = 0,
-	PGRP_SCHMT_ENABLE = 1,
-};
-
-/* Defines whether a pin group cfg's high-speed mode is enabled or not */
-enum pgrp_hsm {
-	PGRP_HSM_DISABLE = 0,
-	PGRP_HSM_ENABLE = 1,
-};
-
-/*
- * This defines the configuration for a pin group's pad control config
- */
-struct padctrl_config {
-	enum pdrive_pingrp padgrp;	/* pin group PDRIVE_PINGRP_x */
-	int slwf;			/* falling edge slew         */
-	int slwr;			/* rising edge slew          */
-	int drvup;			/* pull-up drive strength    */
-	int drvdn;			/* pull-down drive strength  */
-	enum pgrp_lpmd lpmd;		/* low-power mode selection  */
-	enum pgrp_schmt schmt;		/* schmidt enable            */
-	enum pgrp_hsm hsm;		/* high-speed mode enable    */
-};
-
-/* t30 pin drive group and pin mux registers */
-#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
-#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
-				PDRIVE_PINGROUP_COUNT)
-struct pmux_tri_ctlr {
-	uint pmt_reserved0;		/* ABP_MISC_PP_ reserved offset 00 */
-	uint pmt_reserved1;		/* ABP_MISC_PP_ reserved offset 04 */
-	uint pmt_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 08   */
-	uint pmt_reserved2;		/* ABP_MISC_PP_ reserved offset 0C */
-	uint pmt_reserved3;		/* ABP_MISC_PP_ reserved offset 10 */
-	uint pmt_reserved4[4];		/* _TRI_STATE_REG_A/B/C/D in t20 */
-	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
-
-	uint pmt_reserved[528];		/* ABP_MISC_PP_ reserved offs 28-864 */
-
-	uint pmt_drive[PDRIVE_PINGROUP_COUNT];	/* pin drive grps offs 868 */
-	uint pmt_reserved5[PMUX_OFFSET];
-	uint pmt_ctl[PINGRP_COUNT];	/* mux/pupd/tri regs, offset 0x3000 */
-};
-
-/*
- * This defines the configuration for a pin, including the function assigned,
- * pull up/down settings and tristate settings. Having set up one of these
- * you can call pinmux_config_pingroup() to configure a pin in one step. Also
- * available is pinmux_config_table() to configure a list of pins.
- */
-struct pingroup_config {
-	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
-	enum pmux_func func;		/* function to assign FUNC_...      */
-	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
-	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
-	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
-	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
-	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
-	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
-};
-
-/* Set a pin group to tristate */
-void pinmux_tristate_enable(enum pmux_pingrp pin);
-
-/* Set a pin group to normal (non tristate) */
-void pinmux_tristate_disable(enum pmux_pingrp pin);
-
-/* Set the pull up/down feature for a pin group */
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
-
-/* Set the mux function for a pin group */
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
-
-/* Set the complete configuration for a pin group */
-void pinmux_config_pingroup(struct pingroup_config *config);
-
-/* Set a pin group to tristate or normal */
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
-
-/* Set a pin group as input or output */
-void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
-
-/**
- * Configure a list of pin groups
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void pinmux_config_table(struct pingroup_config *config, int len);
-
-/**
- * Set the GP pad configs
- *
- * @param config	List of config items
- * @param len		Number of config items in list
- */
-void padgrp_config_table(struct padctrl_config *config, int len);
-
-#endif	/* _TEGRA30_PINMUX_H_ */
+#endif /* _TEGRA30_PINMUX_H_ */