mtd: nand: omap: move omap_gpmc.h from arch/arm/include/asm to drivers/mtd/nand

omap_gpmc.h is a generic header used by OMAP NAND driver for all TI platfoms.
Hence this file should be present in generic folder instead of architecture
specific include folder.
Build tested using: ./MAKEALL -s am33xx -s omap3 -s omap4 -s omap5

Signed-off-by: Pekon Gupta <pekon@ti.com>

1 files changed, 0 insertions, 84 deletions

diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h
deleted file mode 100644
index 22f6573969..0000000000
--- a/arch/arm/include/asm/omap_gpmc.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com>
- * Rohit Choraria <rohitkc@ti.com>
- *
- * (C) Copyright 2013 Andreas Bießmann <andreas.devel@googlemail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef __ASM_OMAP_GPMC_H
-#define __ASM_OMAP_GPMC_H
-
-#define GPMC_BUF_EMPTY	0
-#define GPMC_BUF_FULL	1
-
-enum omap_ecc {
-	/* 1-bit  ECC calculation by Software, Error detection by Software */
-	OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */
-	/* 1-bit  ECC calculation by GPMC, Error detection by Software */
-	/* ECC layout compatible to legacy ROMCODE. */
-	OMAP_ECC_HAM1_CODE_HW,
-	/* 4-bit  ECC calculation by GPMC, Error detection by Software */
-	OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
-	/* 4-bit  ECC calculation by GPMC, Error detection by ELM */
-	OMAP_ECC_BCH4_CODE_HW,
-	/* 8-bit  ECC calculation by GPMC, Error detection by Software */
-	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
-	/* 8-bit  ECC calculation by GPMC, Error detection by ELM */
-	OMAP_ECC_BCH8_CODE_HW,
-};
-
-struct gpmc_cs {
-	u32 config1;		/* 0x00 */
-	u32 config2;		/* 0x04 */
-	u32 config3;		/* 0x08 */
-	u32 config4;		/* 0x0C */
-	u32 config5;		/* 0x10 */
-	u32 config6;		/* 0x14 */
-	u32 config7;		/* 0x18 */
-	u32 nand_cmd;		/* 0x1C */
-	u32 nand_adr;		/* 0x20 */
-	u32 nand_dat;		/* 0x24 */
-	u8 res[8];		/* blow up to 0x30 byte */
-};
-
-struct bch_res_0_3 {
-	u32 bch_result_x[4];
-};
-
-struct gpmc {
-	u8 res1[0x10];
-	u32 sysconfig;		/* 0x10 */
-	u8 res2[0x4];
-	u32 irqstatus;		/* 0x18 */
-	u32 irqenable;		/* 0x1C */
-	u8 res3[0x20];
-	u32 timeout_control;	/* 0x40 */
-	u8 res4[0xC];
-	u32 config;		/* 0x50 */
-	u32 status;		/* 0x54 */
-	u8 res5[0x8];		/* 0x58 */
-	struct gpmc_cs cs[8];	/* 0x60, 0x90, .. */
-	u8 res6[0x14];		/* 0x1E0 */
-	u32 ecc_config;		/* 0x1F4 */
-	u32 ecc_control;	/* 0x1F8 */
-	u32 ecc_size_config;	/* 0x1FC */
-	u32 ecc1_result;	/* 0x200 */
-	u32 ecc2_result;	/* 0x204 */
-	u32 ecc3_result;	/* 0x208 */
-	u32 ecc4_result;	/* 0x20C */
-	u32 ecc5_result;	/* 0x210 */
-	u32 ecc6_result;	/* 0x214 */
-	u32 ecc7_result;	/* 0x218 */
-	u32 ecc8_result;	/* 0x21C */
-	u32 ecc9_result;	/* 0x220 */
-	u8 res7[12];		/* 0x224 */
-	u32 testmomde_ctrl;	/* 0x230 */
-	u8 res8[12];		/* 0x234 */
-	struct bch_res_0_3 bch_result_0_3[2];	/* 0x240 */
-};
-
-/* Used for board specific gpmc initialization */
-extern struct gpmc *gpmc_cfg;
-
-#endif /* __ASM_OMAP_GPMC_H */