ehci-omap: Clean up added ehci-omap.c

Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci will use
internally dma for all usb ops.

* Add a generic common header ehci-omap.h having common ip block
  data and reg shifts.
* Rename and modify ehci-omap3 to ehci.h retain only conflicting
  sysc reg shifts remove others and move to common header file.
* pass the board data for beagle/panda accordinly to use
  ehci ports.

Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>

1 files changed, 142 insertions, 0 deletions

diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h
new file mode 100644
index 0000000000..e72c5df11e
--- /dev/null
+++ b/arch/arm/include/asm/ehci-omap.h
@@ -0,0 +1,142 @@
+/*
+ * OMAP EHCI port support
+ * Based on LINUX KERNEL
+ * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com*
+ * Author: Govindraj R <govindraj.raja@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _OMAP_COMMON_EHCI_H_
+#define _OMAP_COMMON_EHCI_H_
+
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
+};
+
+#ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
+#define OMAP_HS_USB_PORTS	CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS
+#else
+#define OMAP_HS_USB_PORTS	3
+#endif
+
+#define is_ehci_phy_mode(x)	((x) == OMAP_EHCI_PORT_MODE_PHY)
+#define is_ehci_tll_mode(x)	((x) == OMAP_EHCI_PORT_MODE_TLL)
+#define is_ehci_hsic_mode(x)	((x) == OMAP_EHCI_PORT_MODE_HSIC)
+
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_USBHS_REV1					0x00000010 /* OMAP3 */
+#define OMAP_USBHS_REV2					0x50700100 /* OMAP4 */
+
+/* UHH Register Set */
+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
+
+#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		1
+#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
+#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
+#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK		(1 << 31)
+
+#define OMAP_P1_MODE_CLEAR				(3 << 16)
+#define OMAP_P1_MODE_TLL				(1 << 16)
+#define OMAP_P1_MODE_HSIC				(3 << 16)
+#define OMAP_P2_MODE_CLEAR				(3 << 18)
+#define OMAP_P2_MODE_TLL				(1 << 18)
+#define OMAP_P2_MODE_HSIC				(3 << 18)
+#define OMAP_P3_MODE_HSIC				(3 << 20)
+
+/* EHCI Register Set */
+#define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
+#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
+#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
+#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
+#define EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
+
+#define OMAP_REV1_TLL_CHANNEL_COUNT			3
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
+/* TLL Register Set */
+#define OMAP_TLL_CHANNEL_CONF(num)			(0x004 * num)
+#define OMAP_TLL_CHANNEL_CONF_DRVVBUS			(1 << 16)
+#define OMAP_TLL_CHANNEL_CONF_CHRGVBUS			(1 << 15)
+#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
+#define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI	(2 << 1)
+#define OMAP_TLL_CHANNEL_CONF_CHANEN			1
+
+struct omap_usbhs_board_data {
+	enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS];
+};
+
+struct omap_usbtll {
+	u32 rev;		/* 0x00 */
+	u32 hwinfo;		/* 0x04 */
+	u8 reserved1[0x8];
+	u32 sysc;		/* 0x10 */
+	u32 syss;		/* 0x14 */
+	u32 irqst;		/* 0x18 */
+	u32 irqen;		/* 0x1c */
+	u8 reserved2[0x10];
+	u32 shared_conf;	/* 0x30 */
+	u8 reserved3[0xc];
+	u32 channel_conf;	/* 0x40 */
+};
+
+struct omap_uhh {
+	u32 rev;	/* 0x00 */
+	u32 hwinfo;	/* 0x04 */
+	u8 reserved1[0x8];
+	u32 sysc;	/* 0x10 */
+	u32 syss;	/* 0x14 */
+	u8 reserved2[0x28];
+	u32 hostconfig;	/* 0x40 */
+	u32 debugcsr;	/* 0x44 */
+};
+
+struct omap_ehci {
+	u32 hccapbase;		/* 0x00 */
+	u32 hcsparams;		/* 0x04 */
+	u32 hccparams;		/* 0x08 */
+	u8 reserved1[0x04];
+	u32 usbcmd;		/* 0x10 */
+	u32 usbsts;		/* 0x14 */
+	u32 usbintr;		/* 0x18 */
+	u32 frindex;		/* 0x1c */
+	u32 ctrldssegment;	/* 0x20 */
+	u32 periodiclistbase;	/* 0x24 */
+	u32 asysnclistaddr;	/* 0x28 */
+	u8 reserved2[0x24];
+	u32 configflag;		/* 0x50 */
+	u32 portsc_i;		/* 0x54 */
+	u8 reserved3[0x38];
+	u32 insreg00;		/* 0x90 */
+	u32 insreg01;		/* 0x94 */
+	u32 insreg02;		/* 0x98 */
+	u32 insreg03;		/* 0x9c */
+	u32 insreg04;		/* 0xa0 */
+	u32 insreg05_utmi_ulpi;	/* 0xa4 */
+	u32 insreg06;		/* 0xa8 */
+	u32 insreg07;		/* 0xac */
+	u32 insreg08;		/* 0xb0 */
+};
+
+int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata);
+int omap_ehci_hcd_stop(void);
+
+#endif /* _OMAP_COMMON_EHCI_H_ */