Merge branch 'master' of git://www.denx.de/git/u-boot-imx

3 files changed, 177 insertions, 3 deletions

diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 8aeeaecfd2..a34675c795 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -21,6 +21,7 @@
 #include <asm/arch/crm_regs.h>
 #include <dm.h>
 #include <imx_thermal.h>
+#include <mmc.h>
 
 enum ldo_reg {
 	LDO_ARM,
@@ -355,7 +356,7 @@ __weak int board_mmc_get_env_dev(int devno)
 	return CONFIG_SYS_MMC_ENV_DEV;
 }
 
-int mmc_get_env_dev(void)
+static int mmc_get_boot_dev(void)
 {
 	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
 	u32 soc_sbmr = readl(&src_regs->sbmr1);
@@ -370,15 +371,44 @@ int mmc_get_env_dev(void)
 	 */
 	bootsel = (soc_sbmr & 0x000000FF) >> 6;
 
-	/* If not boot from sd/mmc, use default value */
+	/* No boot from sd/mmc */
 	if (bootsel != 1)
-		return CONFIG_SYS_MMC_ENV_DEV;
+		return -1;
 
 	/* BOOT_CFG2[3] and BOOT_CFG2[4] */
 	devno = (soc_sbmr & 0x00001800) >> 11;
 
+	return devno;
+}
+
+int mmc_get_env_dev(void)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_DEV;
+
 	return board_mmc_get_env_dev(devno);
 }
+
+#ifdef CONFIG_SYS_MMC_ENV_PART
+__weak int board_mmc_get_env_part(int devno)
+{
+	return CONFIG_SYS_MMC_ENV_PART;
+}
+
+uint mmc_get_env_part(struct mmc *mmc)
+{
+	int devno = mmc_get_boot_dev();
+
+	/* If not boot from sd/mmc, use default value */
+	if (devno < 0)
+		return CONFIG_SYS_MMC_ENV_PART;
+
+	return board_mmc_get_env_part(devno);
+}
+#endif
 #endif
 
 int board_postclk_init(void)
@@ -537,3 +567,41 @@ void imx_setup_hdmi(void)
 	writel(reg, &mxc_ccm->chsccdr);
 }
 #endif
+
+#ifdef CONFIG_IMX_BOOTAUX
+int arch_auxiliary_core_up(u32 core_id, u32 boot_private_data)
+{
+	struct src *src_reg;
+	u32 stack, pc;
+
+	if (!boot_private_data)
+		return -EINVAL;
+
+	stack = *(u32 *)boot_private_data;
+	pc = *(u32 *)(boot_private_data + 4);
+
+	/* Set the stack and pc to M4 bootROM */
+	writel(stack, M4_BOOTROM_BASE_ADDR);
+	writel(pc, M4_BOOTROM_BASE_ADDR + 4);
+
+	/* Enable M4 */
+	src_reg = (struct src *)SRC_BASE_ADDR;
+	clrsetbits_le32(&src_reg->scr, SRC_SCR_M4C_NON_SCLR_RST_MASK,
+			SRC_SCR_M4_ENABLE_MASK);
+
+	return 0;
+}
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+	struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+	unsigned val;
+
+	val = readl(&src_reg->scr);
+
+	if (val & SRC_SCR_M4C_NON_SCLR_RST_MASK)
+		return 0;  /* assert in reset */
+
+	return 1;
+}
+#endif
diff --git a/arch/arm/cpu/armv7/mx7/clock.c b/arch/arm/cpu/armv7/mx7/clock.c
index 77db6e8306..4d68ad2615 100644
--- a/arch/arm/cpu/armv7/mx7/clock.c
+++ b/arch/arm/cpu/armv7/mx7/clock.c
@@ -1067,6 +1067,12 @@ void clock_init(void)
 #ifdef CONFIG_NAND_MXS
 	clock_enable(CCGR_RAWNAND, 1);
 #endif
+
+	if (IS_ENABLED(CONFIG_IMX_RDC)) {
+		clock_enable(CCGR_RDC, 1);
+		clock_enable(CCGR_SEMA1, 1);
+		clock_enable(CCGR_SEMA2, 1);
+	}
 }
 
 #ifdef CONFIG_SECURE_BOOT
diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
index a6ab551a4a..ba6cfb9dce 100644
--- a/arch/arm/cpu/armv7/mx7/soc.c
+++ b/arch/arm/cpu/armv7/mx7/soc.c
@@ -12,6 +12,8 @@
 #include <asm/imx-common/boot_mode.h>
 #include <asm/imx-common/dma.h>
 #include <asm/imx-common/hab.h>
+#include <asm/imx-common/rdc-sema.h>
+#include <asm/arch/imx-rdc.h>
 #include <asm/arch/crm_regs.h>
 #include <dm.h>
 #include <imx_thermal.h>
@@ -29,6 +31,65 @@ U_BOOT_DEVICE(imx7_thermal) = {
 };
 #endif
 
+#ifdef CONFIG_IMX_RDC
+/*
+ * In current design, if any peripheral was assigned to both A7 and M4,
+ * it will receive ipg_stop or ipg_wait when any of the 2 platforms enter
+ * low power mode. So M4 sleep will cause some peripherals fail to work
+ * at A7 core side. At default, all resources are in domain 0 - 3.
+ *
+ * There are 26 peripherals impacted by this IC issue:
+ * SIM2(sim2/emvsim2)
+ * SIM1(sim1/emvsim1)
+ * UART1/UART2/UART3/UART4/UART5/UART6/UART7
+ * SAI1/SAI2/SAI3
+ * WDOG1/WDOG2/WDOG3/WDOG4
+ * GPT1/GPT2/GPT3/GPT4
+ * PWM1/PWM2/PWM3/PWM4
+ * ENET1/ENET2
+ * Software Workaround:
+ * Here we setup some resources to domain 0 where M4 codes will move
+ * the M4 out of this domain. Then M4 is not able to access them any longer.
+ * This is a workaround for ic issue. So the peripherals are not shared
+ * by them. This way requires the uboot implemented the RDC driver and
+ * set the 26 IPs above to domain 0 only. M4 code will assign resource
+ * to its own domain, if it want to use the resource.
+ */
+static rdc_peri_cfg_t const resources[] = {
+	(RDC_PER_SIM1 | RDC_DOMAIN(0)),
+	(RDC_PER_SIM2 | RDC_DOMAIN(0)),
+	(RDC_PER_UART1 | RDC_DOMAIN(0)),
+	(RDC_PER_UART2 | RDC_DOMAIN(0)),
+	(RDC_PER_UART3 | RDC_DOMAIN(0)),
+	(RDC_PER_UART4 | RDC_DOMAIN(0)),
+	(RDC_PER_UART5 | RDC_DOMAIN(0)),
+	(RDC_PER_UART6 | RDC_DOMAIN(0)),
+	(RDC_PER_UART7 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI1 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI2 | RDC_DOMAIN(0)),
+	(RDC_PER_SAI3 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG1 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG2 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG3 | RDC_DOMAIN(0)),
+	(RDC_PER_WDOG4 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT1 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT2 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT3 | RDC_DOMAIN(0)),
+	(RDC_PER_GPT4 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM1 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM2 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM3 | RDC_DOMAIN(0)),
+	(RDC_PER_PWM4 | RDC_DOMAIN(0)),
+	(RDC_PER_ENET1 | RDC_DOMAIN(0)),
+	(RDC_PER_ENET2 | RDC_DOMAIN(0)),
+};
+
+static void isolate_resource(void)
+{
+	imx_rdc_setup_peripherals(resources, ARRAY_SIZE(resources));
+}
+#endif
+
 #if defined(CONFIG_SECURE_BOOT)
 struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
 	.bank = 1,
@@ -163,6 +224,9 @@ int arch_cpu_init(void)
 	mxs_dma_init();
 #endif
 
+	if (IS_ENABLED(CONFIG_IMX_RDC))
+		isolate_resource();
+
 	return 0;
 }
 
@@ -211,6 +275,42 @@ void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 }
 #endif
 
+#ifdef CONFIG_IMX_BOOTAUX
+int arch_auxiliary_core_up(u32 core_id, u32 boot_private_data)
+{
+	u32 stack, pc;
+	struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+
+	if (!boot_private_data)
+		return 1;
+
+	stack = *(u32 *)boot_private_data;
+	pc = *(u32 *)(boot_private_data + 4);
+
+	/* Set the stack and pc to M4 bootROM */
+	writel(stack, M4_BOOTROM_BASE_ADDR);
+	writel(pc, M4_BOOTROM_BASE_ADDR + 4);
+
+	/* Enable M4 */
+	clrsetbits_le32(&src_reg->m4rcr, SRC_M4RCR_M4C_NON_SCLR_RST_MASK,
+			SRC_M4RCR_ENABLE_M4_MASK);
+
+	return 0;
+}
+
+int arch_auxiliary_core_check_up(u32 core_id)
+{
+	uint32_t val;
+	struct src *src_reg = (struct src *)SRC_BASE_ADDR;
+
+	val = readl(&src_reg->m4rcr);
+	if (val & 0x00000001)
+		return 0; /* assert in reset */
+
+	return 1;
+}
+#endif
+
 void set_wdog_reset(struct wdog_regs *wdog)
 {
 	u32 reg = readw(&wdog->wcr);