Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h

5 files changed, 62 insertions, 23 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index a31bf40e5b..453effa541 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -32,6 +32,7 @@
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
 #include <asm/omap_musb.h>
+#include <asm/davinci_rtc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -150,15 +151,15 @@ __weak void am33xx_spl_board_init(void)
 
 static void rtc32k_enable(void)
 {
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+	struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
 
 	/*
 	 * Unlock the RTC's registers.  For more details please see the
 	 * RTC_SS section of the TRM.  In order to unlock we need to
 	 * write these specific values (keys) in this order.
 	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
+	writel(RTC_KICK0R_WE, &rtc->kick0r);
+	writel(RTC_KICK1R_WE, &rtc->kick1r);
 
 	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
 	writel((1 << 3) | (1 << 6), &rtc->osc);
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 25fadf6487..f5bc6728b7 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -45,6 +45,12 @@
 #endif
 
 	mcr 15, 1, r0, c9, c0, 2
+
+	/* enable L2 cache */
+	mrc 15, 0, r0, c1, c0, 1
+	orr r0, r0, #2
+	mcr 15, 0, r0, c1, c0, 1
+
 .endm /* init_l2cc */
 
 /* AIPS setup - Only setup MPROTx registers.
@@ -369,12 +375,6 @@ setup_pll_func:
 #endif	/* CONFIG_MX53 */
 .endm
 
-.macro setup_wdog
-	ldr r0, =WDOG1_BASE_ADDR
-	mov r1, #0x30
-	strh r1, [r0]
-.endm
-
 ENTRY(lowlevel_init)
 	mov r10, lr
 	mov r4, #0	/* Fix R4 to 0 */
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index cf3a38e813..873d9d0fd8 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -100,6 +100,32 @@ static u32 decode_pll(enum pll_clocks pll, u32 infreq)
 	}
 	/* NOTREACHED */
 }
+static u32 mxc_get_pll_pfd(enum pll_clocks pll, int pfd_num)
+{
+	u32 div;
+	u64 freq;
+
+	switch (pll) {
+	case PLL_BUS:
+		if (pfd_num == 3) {
+			/* No PFD3 on PPL2 */
+			return 0;
+		}
+		div = __raw_readl(&imx_ccm->analog_pfd_528);
+		freq = (u64)decode_pll(PLL_BUS, MXC_HCLK);
+		break;
+	case PLL_USBOTG:
+		div = __raw_readl(&imx_ccm->analog_pfd_480);
+		freq = (u64)decode_pll(PLL_USBOTG, MXC_HCLK);
+		break;
+	default:
+		/* No PFD on other PLL					     */
+		return 0;
+	}
+
+	return (freq * 18) / ((div & ANATOP_PFD_FRAC_MASK(pfd_num)) >>
+			      ANATOP_PFD_FRAC_SHIFT(pfd_num));
+}
 
 static u32 get_mcu_main_clk(void)
 {
@@ -144,13 +170,14 @@ u32 get_periph_clk(void)
 			freq = decode_pll(PLL_BUS, MXC_HCLK);
 			break;
 		case 1:
-			freq = PLL2_PFD2_FREQ;
+			freq = mxc_get_pll_pfd(PLL_BUS, 2);
 			break;
 		case 2:
-			freq = PLL2_PFD0_FREQ;
+			freq = mxc_get_pll_pfd(PLL_BUS, 0);
 			break;
 		case 3:
-			freq = PLL2_PFD2_DIV_FREQ;
+			/* static / 2 divider */
+			freq = mxc_get_pll_pfd(PLL_BUS, 2) / 2;
 			break;
 		default:
 			break;
@@ -184,7 +211,7 @@ static u32 get_ipg_per_clk(void)
 static u32 get_uart_clk(void)
 {
 	u32 reg, uart_podf;
-	u32 freq = PLL3_80M;
+	u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
 	reg = __raw_readl(&imx_ccm->cscdr1);
 #ifdef CONFIG_MX6SL
 	if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
@@ -204,7 +231,7 @@ static u32 get_cspi_clk(void)
 	reg &= MXC_CCM_CSCDR2_ECSPI_CLK_PODF_MASK;
 	cspi_podf = reg >> MXC_CCM_CSCDR2_ECSPI_CLK_PODF_OFFSET;
 
-	return	PLL3_60M / (cspi_podf + 1);
+	return	decode_pll(PLL_USBOTG, MXC_HCLK) / (8 * (cspi_podf + 1));
 }
 
 static u32 get_axi_clk(void)
@@ -217,9 +244,9 @@ static u32 get_axi_clk(void)
 
 	if (cbcdr & MXC_CCM_CBCDR_AXI_SEL) {
 		if (cbcdr & MXC_CCM_CBCDR_AXI_ALT_SEL)
-			root_freq = PLL2_PFD2_FREQ;
+			root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
 		else
-			root_freq = PLL3_PFD1_FREQ;
+			root_freq = mxc_get_pll_pfd(PLL_USBOTG, 1);
 	} else
 		root_freq = get_periph_clk();
 
@@ -244,10 +271,10 @@ static u32 get_emi_slow_clk(void)
 		root_freq = decode_pll(PLL_USBOTG, MXC_HCLK);
 		break;
 	case 2:
-		root_freq = PLL2_PFD2_FREQ;
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 2);
 		break;
 	case 3:
-		root_freq = PLL2_PFD0_FREQ;
+		root_freq =  mxc_get_pll_pfd(PLL_BUS, 0);
 		break;
 	}
 
@@ -270,13 +297,14 @@ static u32 get_mmdc_ch0_clk(void)
 		freq = decode_pll(PLL_BUS, MXC_HCLK);
 		break;
 	case 1:
-		freq = PLL2_PFD2_FREQ;
+		freq = mxc_get_pll_pfd(PLL_BUS, 2);
 		break;
 	case 2:
-		freq = PLL2_PFD0_FREQ;
+		freq = mxc_get_pll_pfd(PLL_BUS, 0);
 		break;
 	case 3:
-		freq = PLL2_PFD2_DIV_FREQ;
+		/* static / 2 divider */
+		freq =  mxc_get_pll_pfd(PLL_BUS, 2) / 2;
 	}
 
 	return freq / (podf + 1);
@@ -359,9 +387,9 @@ static u32 get_usdhc_clk(u32 port)
 	}
 
 	if (clk_sel)
-		root_freq = PLL2_PFD0_FREQ;
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 0);
 	else
-		root_freq = PLL2_PFD2_FREQ;
+		root_freq = mxc_get_pll_pfd(PLL_BUS, 2);
 
 	return root_freq / (usdhc_podf + 1);
 }
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index 0ffa03ac01..69fff323d3 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -14,6 +14,7 @@
 #include <asm/arch/omap.h>
 #include <asm/arch/mmc_host_def.h>
 #include <asm/arch/sys_proto.h>
+#include <watchdog.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -76,6 +77,9 @@ void spl_board_init(void)
 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
 	arch_misc_init();
 #endif
+#if defined(CONFIG_HW_WATCHDOG)
+	hw_watchdog_init();
+#endif
 #ifdef CONFIG_AM33XX
 	am33xx_spl_board_init();
 #endif
diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c
index 49149861f8..2bb38438ae 100644
--- a/arch/arm/cpu/armv7/zynq/cpu.c
+++ b/arch/arm/cpu/armv7/zynq/cpu.c
@@ -11,6 +11,10 @@
 
 void lowlevel_init(void)
 {
+}
+
+int arch_cpu_init(void)
+{
 	zynq_slcr_unlock();
 	/* remap DDR to zero, FILTERSTART */
 	writel(0, &scu_base->filter_start);
@@ -31,6 +35,8 @@ void lowlevel_init(void)
 	writel(0xC, &slcr_base->ddr_urgent);
 
 	zynq_slcr_lock();
+
+	return 0;
 }
 
 void reset_cpu(ulong addr)