Merge git://git.denx.de/u-boot-dm

Fix a trivial conflict over adding <dm.h>

Conflicts:
	arch/arm/cpu/armv7/omap3/board.c

Signed-off-by: Tom Rini <trini@ti.com>

8 files changed, 134 insertions, 1 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 828d10bb5a..29b1d73438 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -9,7 +9,9 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
+#include <ns16550.h>
 #include <spl.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>
@@ -36,6 +38,63 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata am33xx_gpio[] = {
+	{ 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
+	{ 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
+	{ 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX },
+	{ 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_AM43XX
+	{ 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX },
+#endif
+};
+
+U_BOOT_DEVICES(am33xx_gpios) = {
+	{ "gpio_omap", &am33xx_gpio[0] },
+	{ "gpio_omap", &am33xx_gpio[1] },
+	{ "gpio_omap", &am33xx_gpio[2] },
+	{ "gpio_omap", &am33xx_gpio[3] },
+#ifdef CONFIG_AM43XX
+	{ "gpio_omap", &am33xx_gpio[4] },
+	{ "gpio_omap", &am33xx_gpio[5] },
+#endif
+};
+
+# ifndef CONFIG_OF_CONTROL
+/*
+ * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove
+ * the CONFIGs. At the same time, we should move this to the board files.
+ */
+static const struct ns16550_platdata am33xx_serial[] = {
+	{ CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+#  ifdef CONFIG_SYS_NS16550_COM2
+	{ CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+#   ifdef CONFIG_SYS_NS16550_COM3
+	{ CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
+	{ CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
+	{ CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
+	{ CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+#   endif
+#  endif
+};
+
+U_BOOT_DEVICES(am33xx_uarts) = {
+	{ "serial_omap", &am33xx_serial[0] },
+#  ifdef CONFIG_SYS_NS16550_COM2
+	{ "serial_omap", &am33xx_serial[1] },
+#   ifdef CONFIG_SYS_NS16550_COM3
+	{ "serial_omap", &am33xx_serial[2] },
+	{ "serial_omap", &am33xx_serial[3] },
+	{ "serial_omap", &am33xx_serial[4] },
+	{ "serial_omap", &am33xx_serial[5] },
+#   endif
+#  endif
+};
+# endif
+
+#else
+
 static const struct gpio_bank gpio_bank_am33xx[] = {
 	{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -49,6 +108,8 @@ static const struct gpio_bank gpio_bank_am33xx[] = {
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
 
+#endif
+
 #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
 int cpu_mmc_init(bd_t *bis)
 {
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index a1c5b09916..c942fe67ee 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -17,6 +17,7 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <dm.h>
 #include <mmc.h>
 #include <spl.h>
 #include <asm/io.h>
@@ -24,7 +25,7 @@
 #include <asm/arch/mem.h>
 #include <asm/cache.h>
 #include <asm/armv7.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mmc_host_def.h>
 #include <i2c.h>
@@ -39,6 +40,27 @@ static void omap3_setup_aux_cr(void);
 static void omap3_invalidate_l2_cache_secure(void);
 #endif
 
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata omap34xx_gpio[] = {
+	{ 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
+	{ 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
+	{ 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
+	{ 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
+	{ 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
+	{ 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+U_BOOT_DEVICES(am33xx_gpios) = {
+	{ "gpio_omap", &omap34xx_gpio[0] },
+	{ "gpio_omap", &omap34xx_gpio[1] },
+	{ "gpio_omap", &omap34xx_gpio[2] },
+	{ "gpio_omap", &omap34xx_gpio[3] },
+	{ "gpio_omap", &omap34xx_gpio[4] },
+	{ "gpio_omap", &omap34xx_gpio[5] },
+};
+
+#else
+
 static const struct gpio_bank gpio_bank_34xx[6] = {
 	{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
 	{ (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
@@ -50,6 +72,8 @@ static const struct gpio_bank gpio_bank_34xx[6] = {
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
 
+#endif
+
 #ifdef CONFIG_SPL_BUILD
 /*
 * We use static variables because global data is not ready yet.
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index b385e19544..781b511a97 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
 		sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
new file mode 100644
index 0000000000..0047223181
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		36864000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index 712afd1bee..e11f4f6d8b 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \
 				sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
new file mode 100644
index 0000000000..6da921e920
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		73728000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index b385e19544..781b511a97 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
 		sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
new file mode 100644
index 0000000000..59d054a310
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		80000000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)