ARM: OMAP4+: Make control module register structure generic

A seperate omap_sys_ctrl_regs structure is defined for
omap4 & 5. If there is any change in control module for
any of the ES versions, a new structure needs to be created.
In order to remove this dependency, making the register
structure generic for all the omap4+ boards.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index cdc4864919..0f58b2f1a7 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -304,3 +304,77 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_sldo_mm_setup = 0x4ae07bd4,
 	.prm_sldo_mm_ctrl = 0x4ae07bd8,
 };
+
+struct omap_sys_ctrl_regs const omap5_ctrl = {
+	.control_status				= 0x4A002134,
+	.control_paconf_global			= 0x4A002DA0,
+	.control_paconf_mode			= 0x4A002DA4,
+	.control_smart1io_padconf_0		= 0x4A002DA8,
+	.control_smart1io_padconf_1		= 0x4A002DAC,
+	.control_smart1io_padconf_2		= 0x4A002DB0,
+	.control_smart2io_padconf_0		= 0x4A002DB4,
+	.control_smart2io_padconf_1		= 0x4A002DB8,
+	.control_smart2io_padconf_2		= 0x4A002DBC,
+	.control_smart3io_padconf_0		= 0x4A002DC0,
+	.control_smart3io_padconf_1		= 0x4A002DC4,
+	.control_pbias				= 0x4A002E00,
+	.control_i2c_0				= 0x4A002E04,
+	.control_camera_rx			= 0x4A002E08,
+	.control_hdmi_tx_phy			= 0x4A002E0C,
+	.control_uniportm			= 0x4A002E10,
+	.control_dsiphy				= 0x4A002E14,
+	.control_mcbsplp			= 0x4A002E18,
+	.control_usb2phycore			= 0x4A002E1C,
+	.control_hdmi_1				= 0x4A002E20,
+	.control_hsi				= 0x4A002E24,
+	.control_ddr3ch1_0			= 0x4A002E30,
+	.control_ddr3ch2_0			= 0x4A002E34,
+	.control_ddrch1_0			= 0x4A002E38,
+	.control_ddrch1_1			= 0x4A002E3C,
+	.control_ddrch2_0			= 0x4A002E40,
+	.control_ddrch2_1			= 0x4A002E44,
+	.control_lpddr2ch1_0			= 0x4A002E48,
+	.control_lpddr2ch1_1			= 0x4A002E4C,
+	.control_ddrio_0			= 0x4A002E50,
+	.control_ddrio_1			= 0x4A002E54,
+	.control_ddrio_2			= 0x4A002E58,
+	.control_hyst_1				= 0x4A002E5C,
+	.control_usbb_hsic_control		= 0x4A002E60,
+	.control_c2c				= 0x4A002E64,
+	.control_core_control_spare_rw		= 0x4A002E68,
+	.control_core_control_spare_r		= 0x4A002E6C,
+	.control_core_control_spare_r_c0	= 0x4A002E70,
+	.control_srcomp_north_side		= 0x4A002E74,
+	.control_srcomp_south_side		= 0x4A002E78,
+	.control_srcomp_east_side		= 0x4A002E7C,
+	.control_srcomp_west_side		= 0x4A002E80,
+	.control_srcomp_code_latch		= 0x4A002E84,
+	.control_port_emif1_sdram_config	= 0x4AE0C110,
+	.control_port_emif1_lpddr2_nvm_config	= 0x4AE0C114,
+	.control_port_emif2_sdram_config	= 0x4AE0C118,
+	.control_emif1_sdram_config_ext		= 0x4AE0C144,
+	.control_emif2_sdram_config_ext		= 0x4AE0C148,
+	.control_smart1nopmio_padconf_0		= 0x4AE0CDA0,
+	.control_smart1nopmio_padconf_1		= 0x4AE0CDA4,
+	.control_padconf_mode			= 0x4AE0CDA8,
+	.control_xtal_oscillator		= 0x4AE0CDAC,
+	.control_i2c_2				= 0x4AE0CDB0,
+	.control_ckobuffer			= 0x4AE0CDB4,
+	.control_wkup_control_spare_rw		= 0x4AE0CDB8,
+	.control_wkup_control_spare_r		= 0x4AE0CDBC,
+	.control_wkup_control_spare_r_c0	= 0x4AE0CDC0,
+	.control_srcomp_east_side_wkup		= 0x4AE0CDC4,
+	.control_efuse_1			= 0x4AE0CDC8,
+	.control_efuse_2			= 0x4AE0CDCC,
+	.control_efuse_3			= 0x4AE0CDD0,
+	.control_efuse_4			= 0x4AE0CDD4,
+	.control_efuse_5			= 0x4AE0CDD8,
+	.control_efuse_6			= 0x4AE0CDDC,
+	.control_efuse_7			= 0x4AE0CDE0,
+	.control_efuse_8			= 0x4AE0CDE4,
+	.control_efuse_9			= 0x4AE0CDE8,
+	.control_efuse_10			= 0x4AE0CDEC,
+	.control_efuse_11			= 0x4AE0CDF0,
+	.control_efuse_12			= 0x4AE0CDF4,
+	.control_efuse_13			= 0x4AE0CDF8,
+};