ARM: davinci: move SoC sources to mach-davinci

Move
arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>

24 files changed, 0 insertions, 3230 deletions

diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index f41357aaeb..27b4353a9d 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -15,7 +15,6 @@ endif
 endif
 
 obj-$(CONFIG_ARMADA100) += armada100/
-obj-$(CONFIG_ARCH_DAVINCI) += davinci/
 obj-$(CONFIG_KIRKWOOD) += kirkwood/
 obj-$(if $(filter lpc32xx,$(SOC)),y) += lpc32xx/
 obj-$(CONFIG_MB86R0x) += mb86r0x/
diff --git a/arch/arm/cpu/arm926ejs/davinci/Kconfig b/arch/arm/cpu/arm926ejs/davinci/Kconfig
deleted file mode 100644
index 613f04d8b0..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/Kconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-if ARCH_DAVINCI
-
-choice
-	prompt "DaVinci board select"
-
-config TARGET_ENBW_CMC
-	bool "EnBW CMC board"
-
-config TARGET_IPAM390
-	bool "IPAM390 board"
-	select SUPPORT_SPL
-
-config TARGET_DA830EVM
-	bool "DA830 EVM board"
-
-config TARGET_DA850EVM
-	bool "DA850 EVM board"
-	select SUPPORT_SPL
-
-config TARGET_CAM_ENC_4XX
-	bool "CAM ENC 4xx board"
-	select SUPPORT_SPL
-
-config TARGET_HAWKBOARD
-	bool "Hawkboard"
-	select SUPPORT_SPL
-
-config TARGET_DAVINCI_DM355EVM
-	bool "DM355 EVM board"
-
-config TARGET_DAVINCI_DM355LEOPARD
-	bool "DM355 Leopard board"
-
-config TARGET_DAVINCI_DM365EVM
-	bool "DM365 EVM board"
-
-config TARGET_DAVINCI_DM6467EVM
-	bool "DM6467 EVM board"
-
-config TARGET_DAVINCI_DVEVM
-	bool "DVEVM board"
-
-config TARGET_EA20
-	bool "EA20 board"
-
-config TARGET_DAVINCI_SCHMOOGIE
-	bool "Schmoogie board"
-
-config TARGET_DAVINCI_SFFSDR
-	bool "SFFSDR board"
-
-config TARGET_DAVINCI_SONATA
-	bool "Sonata board"
-
-config TARGET_CALIMAIN
-	bool "Calimain board"
-
-endchoice
-
-config SYS_SOC
-	default "davinci"
-
-source "board/enbw/enbw_cmc/Kconfig"
-source "board/ait/cam_enc_4xx/Kconfig"
-source "board/Barix/ipam390/Kconfig"
-source "board/davinci/da8xxevm/Kconfig"
-source "board/davinci/dm355evm/Kconfig"
-source "board/davinci/dm355leopard/Kconfig"
-source "board/davinci/dm365evm/Kconfig"
-source "board/davinci/dm6467evm/Kconfig"
-source "board/davinci/dvevm/Kconfig"
-source "board/davinci/ea20/Kconfig"
-source "board/davinci/schmoogie/Kconfig"
-source "board/davinci/sffsdr/Kconfig"
-source "board/davinci/sonata/Kconfig"
-source "board/omicron/calimain/Kconfig"
-
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
deleted file mode 100644
index 7d67191de8..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y				+= cpu.o misc.o timer.o psc.o pinmux.o reset.o
-obj-$(CONFIG_DA850_LOWLEVEL)	+= da850_lowlevel.o
-obj-$(CONFIG_SOC_DM355)	+= dm355.o
-obj-$(CONFIG_SOC_DM365)	+= dm365.o
-obj-$(CONFIG_SOC_DM644X)	+= dm644x.o
-obj-$(CONFIG_SOC_DM646X)	+= dm646x.o
-obj-$(CONFIG_SOC_DA830)	+= da830_pinmux.o
-obj-$(CONFIG_SOC_DA850)	+= da850_pinmux.o
-obj-$(CONFIG_DRIVER_TI_EMAC)	+= lxt972.o dp83848.o et1011c.o ksz8873.o
-
-ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK)	+= spl.o
-obj-$(CONFIG_SOC_DM365)	+= dm365_lowlevel.o
-obj-$(CONFIG_SOC_DA8XX)	+= da850_lowlevel.o
-endif
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y	+= lowlevel_init.o
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/config.mk b/arch/arm/cpu/arm926ejs/davinci/config.mk
deleted file mode 100644
index 69e9d5ab21..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Copyright (C) 2012, Texas Instruments, Incorporated - http://www.ti.com/
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-ifndef CONFIG_SPL_BUILD
-ALL-$(CONFIG_SPL_FRAMEWORK)	+= u-boot.ais
-endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
deleted file mode 100644
index ff61147757..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) 2004 Texas Instruments.
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* offsets from PLL controller base */
-#define PLLC_PLLCTL	0x100
-#define PLLC_PLLM	0x110
-#define PLLC_PREDIV	0x114
-#define PLLC_PLLDIV1	0x118
-#define PLLC_PLLDIV2	0x11c
-#define PLLC_PLLDIV3	0x120
-#define PLLC_POSTDIV	0x128
-#define PLLC_BPDIV	0x12c
-#define PLLC_PLLDIV4	0x160
-#define PLLC_PLLDIV5	0x164
-#define PLLC_PLLDIV6	0x168
-#define PLLC_PLLDIV7	0x16c
-#define PLLC_PLLDIV8	0x170
-#define PLLC_PLLDIV9	0x174
-
-#define BIT(x)		(1 << (x))
-
-/* SOC-specific pll info */
-#ifdef CONFIG_SOC_DM355
-#define ARM_PLLDIV	PLLC_PLLDIV1
-#define DDR_PLLDIV	PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DM644X
-#define ARM_PLLDIV	PLLC_PLLDIV2
-#define DSP_PLLDIV	PLLC_PLLDIV1
-#define DDR_PLLDIV	PLLC_PLLDIV2
-#endif
-
-#ifdef CONFIG_SOC_DM646X
-#define DSP_PLLDIV	PLLC_PLLDIV1
-#define ARM_PLLDIV	PLLC_PLLDIV2
-#define DDR_PLLDIV	PLLC_PLLDIV1
-#endif
-
-#ifdef CONFIG_SOC_DA8XX
-unsigned int sysdiv[9] = {
-	PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
-	PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
-};
-
-int clk_get(enum davinci_clk_ids id)
-{
-	int pre_div;
-	int pllm;
-	int post_div;
-	int pll_out;
-	unsigned int pll_base;
-
-	pll_out = CONFIG_SYS_OSCIN_FREQ;
-
-	if (id == DAVINCI_AUXCLK_CLKID)
-		goto out;
-
-	if ((id >> 16) == 1)
-		pll_base = (unsigned int)davinci_pllc1_regs;
-	else
-		pll_base = (unsigned int)davinci_pllc0_regs;
-
-	id &= 0xFFFF;
-
-	/*
-	 * Lets keep this simple. Combining operations can result in
-	 * unexpected approximations
-	 */
-	pre_div = (readl(pll_base + PLLC_PREDIV) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-	pllm = readl(pll_base + PLLC_PLLM) + 1;
-
-	pll_out /= pre_div;
-	pll_out *= pllm;
-
-	if (id == DAVINCI_PLLM_CLKID)
-		goto out;
-
-	post_div = (readl(pll_base + PLLC_POSTDIV) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-
-	pll_out /= post_div;
-
-	if (id == DAVINCI_PLLC_CLKID)
-		goto out;
-
-	pll_out /= (readl(pll_base + sysdiv[id - 1]) &
-		DAVINCI_PLLC_DIV_MASK) + 1;
-
-out:
-	return pll_out;
-}
-
-int set_cpu_clk_info(void)
-{
-	gd->bd->bi_arm_freq = clk_get(DAVINCI_ARM_CLKID) / 1000000;
-	/* DDR PHY uses an x2 input clock */
-	gd->bd->bi_ddr_freq = cpu_is_da830() ? 0 :
-				(clk_get(DAVINCI_DDR_CLKID) / 1000000);
-	gd->bd->bi_dsp_freq = 0;
-	return 0;
-}
-
-#else /* CONFIG_SOC_DA8XX */
-
-static unsigned pll_div(volatile void *pllbase, unsigned offset)
-{
-	u32	div;
-
-	div = REG(pllbase + offset);
-	return (div & BIT(15)) ? (1 + (div & 0x1f)) : 1;
-}
-
-static inline unsigned pll_prediv(volatile void *pllbase)
-{
-#ifdef CONFIG_SOC_DM355
-	/* this register read seems to fail on pll0 */
-	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
-		return 8;
-	else
-		return pll_div(pllbase, PLLC_PREDIV);
-#elif defined(CONFIG_SOC_DM365)
-	return pll_div(pllbase, PLLC_PREDIV);
-#endif
-	return 1;
-}
-
-static inline unsigned pll_postdiv(volatile void *pllbase)
-{
-#if defined(CONFIG_SOC_DM355) || defined(CONFIG_SOC_DM365)
-	return pll_div(pllbase, PLLC_POSTDIV);
-#elif defined(CONFIG_SOC_DM6446)
-	if (pllbase == (volatile void *)DAVINCI_PLL_CNTRL0_BASE)
-		return pll_div(pllbase, PLLC_POSTDIV);
-#endif
-	return 1;
-}
-
-static unsigned pll_sysclk_mhz(unsigned pll_addr, unsigned div)
-{
-	volatile void	*pllbase = (volatile void *) pll_addr;
-#ifdef CONFIG_SOC_DM646X
-	unsigned	base = CONFIG_REFCLK_FREQ / 1000;
-#else
-	unsigned	base = CONFIG_SYS_HZ_CLOCK / 1000;
-#endif
-
-	/* the PLL might be bypassed */
-	if (readl(pllbase + PLLC_PLLCTL) & BIT(0)) {
-		base /= pll_prediv(pllbase);
-#if defined(CONFIG_SOC_DM365)
-		base *=  2 * (readl(pllbase + PLLC_PLLM) & 0x0ff);
-#else
-		base *= 1 + (REG(pllbase + PLLC_PLLM) & 0x0ff);
-#endif
-		base /= pll_postdiv(pllbase);
-	}
-	return DIV_ROUND_UP(base, 1000 * pll_div(pllbase, div));
-}
-
-#ifdef DAVINCI_DM6467EVM
-unsigned int davinci_arm_clk_get()
-{
-	return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
-}
-#endif
-
-#if defined(CONFIG_SOC_DM365)
-unsigned int davinci_clk_get(unsigned int div)
-{
-	return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, div) * 1000000;
-}
-#endif
-
-int set_cpu_clk_info(void)
-{
-	unsigned int pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#if defined(CONFIG_SOC_DM365)
-	pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#endif
-	gd->bd->bi_arm_freq = pll_sysclk_mhz(pllbase, ARM_PLLDIV);
-
-#ifdef DSP_PLLDIV
-	gd->bd->bi_dsp_freq =
-		pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, DSP_PLLDIV);
-#else
-	gd->bd->bi_dsp_freq = 0;
-#endif
-
-	pllbase = DAVINCI_PLL_CNTRL1_BASE;
-#if defined(CONFIG_SOC_DM365)
-	pllbase = DAVINCI_PLL_CNTRL0_BASE;
-#endif
-	gd->bd->bi_ddr_freq = pll_sysclk_mhz(pllbase, DDR_PLLDIV) / 2;
-
-	return 0;
-}
-
-#endif /* !CONFIG_SOC_DA8XX */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_DRIVER_TI_EMAC)
-	davinci_emac_initialize();
-#endif
-	return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
deleted file mode 100644
index edaab45327..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/da830_pinmux.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Pinmux configurations for the DA830 SoCs
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pinmux_defs.h>
-
-/* SPI0 pin muxer settings */
-const struct pinmux_config spi0_pins_base[] = {
-	{ pinmux(7), 1, 3 },  /* SPI0_SOMI */
-	{ pinmux(7), 1, 4 },  /* SPI0_SIMO */
-	{ pinmux(7), 1, 6 }   /* SPI0_CLK */
-};
-
-const struct pinmux_config spi0_pins_scs0[] = {
-	{ pinmux(7), 1, 7 }   /* SPI0_SCS[0] */
-};
-
-const struct pinmux_config spi0_pins_ena[] = {
-	{ pinmux(7), 1, 5 }   /* SPI0_ENA */
-};
-
-/* NAND pin muxer settings */
-const struct pinmux_config emifa_pins_cs0[] = {
-	{ pinmux(18), 1, 2 }   /* EMA_CS[0] */
-};
-
-const struct pinmux_config emifa_pins_cs2[] = {
-	{ pinmux(18), 1, 3 }   /* EMA_CS[2] */
-};
-
-const struct pinmux_config emifa_pins_cs3[] = {
-	{ pinmux(18), 1, 4 }   /* EMA_CS[3] */
-};
-
-#ifdef CONFIG_USE_NAND
-const struct pinmux_config emifa_pins[] = {
-	{ pinmux(13), 1, 6 },  /* EMA_D[0] */
-	{ pinmux(13), 1, 7 },  /* EMA_D[1] */
-	{ pinmux(14), 1, 0 },  /* EMA_D[2] */
-	{ pinmux(14), 1, 1 },  /* EMA_D[3] */
-	{ pinmux(14), 1, 2 },  /* EMA_D[4] */
-	{ pinmux(14), 1, 3 },  /* EMA_D[5] */
-	{ pinmux(14), 1, 4 },  /* EMA_D[6] */
-	{ pinmux(14), 1, 5 },  /* EMA_D[7] */
-	{ pinmux(14), 1, 6 },  /* EMA_D[8] */
-	{ pinmux(14), 1, 7 },  /* EMA_D[9] */
-	{ pinmux(15), 1, 0 },  /* EMA_D[10] */
-	{ pinmux(15), 1, 1 },  /* EMA_D[11] */
-	{ pinmux(15), 1, 2 },  /* EMA_D[12] */
-	{ pinmux(15), 1, 3 },  /* EMA_D[13] */
-	{ pinmux(15), 1, 4 },  /* EMA_D[14] */
-	{ pinmux(15), 1, 5 },  /* EMA_D[15] */
-	{ pinmux(15), 1, 6 },  /* EMA_A[0] */
-	{ pinmux(15), 1, 7 },  /* EMA_A[1] */
-	{ pinmux(16), 1, 0 },  /* EMA_A[2] */
-	{ pinmux(16), 1, 1 },  /* EMA_A[3] */
-	{ pinmux(16), 1, 2 },  /* EMA_A[4] */
-	{ pinmux(16), 1, 3 },  /* EMA_A[5] */
-	{ pinmux(16), 1, 4 },  /* EMA_A[6] */
-	{ pinmux(16), 1, 5 },  /* EMA_A[7] */
-	{ pinmux(16), 1, 6 },  /* EMA_A[8] */
-	{ pinmux(16), 1, 7 },  /* EMA_A[9] */
-	{ pinmux(17), 1, 0 },  /* EMA_A[10] */
-	{ pinmux(17), 1, 1 },  /* EMA_A[11] */
-	{ pinmux(17), 1, 2 },  /* EMA_A[12] */
-	{ pinmux(17), 1, 3 },  /* EMA_BA[1] */
-	{ pinmux(17), 1, 4 },  /* EMA_BA[0] */
-	{ pinmux(17), 1, 5 },  /* EMA_CLK */
-	{ pinmux(17), 1, 6 },  /* EMA_SDCKE */
-	{ pinmux(17), 1, 7 },  /* EMA_CAS */
-	{ pinmux(18), 1, 0 },  /* EMA_CAS */
-	{ pinmux(18), 1, 1 },  /* EMA_WE */
-	{ pinmux(18), 1, 5 },  /* EMA_OE */
-	{ pinmux(18), 1, 6 },  /* EMA_WE_DQM[1] */
-	{ pinmux(18), 1, 7 },  /* EMA_WE_DQM[0] */
-	{ pinmux(10), 1, 0 }   /* Tristate */
-};
-#endif
-
-/* EMAC PHY interface pins */
-const struct pinmux_config emac_pins_rmii[] = {
-	{ pinmux(10), 2, 1 },  /* RMII_TXD[0] */
-	{ pinmux(10), 2, 2 },  /* RMII_TXD[1] */
-	{ pinmux(10), 2, 3 },  /* RMII_TXEN */
-	{ pinmux(10), 2, 4 },  /* RMII_CRS_DV */
-	{ pinmux(10), 2, 5 },  /* RMII_RXD[0] */
-	{ pinmux(10), 2, 6 },  /* RMII_RXD[1] */
-	{ pinmux(10), 2, 7 }   /* RMII_RXER */
-};
-
-const struct pinmux_config emac_pins_mdio[] = {
-	{ pinmux(11), 2, 0 },  /* MDIO_CLK */
-	{ pinmux(11), 2, 1 }   /* MDIO_D */
-};
-
-const struct pinmux_config emac_pins_rmii_clk_source[] = {
-	{ pinmux(9), 0, 5 }    /* ref.clk from external source */
-};
-
-/* UART2 pin muxer settings */
-const struct pinmux_config uart2_pins_txrx[] = {
-	{ pinmux(8), 2, 7 },   /* UART2_RXD */
-	{ pinmux(9), 2, 0 }    /* UART2_TXD */
-};
-
-/* I2C0 pin muxer settings */
-const struct pinmux_config i2c0_pins[] = {
-	{ pinmux(8), 2, 3 },   /* I2C0_SDA */
-	{ pinmux(8), 2, 4 }    /* I2C0_SCL */
-};
-
-/* USB0_DRVVBUS pin muxer settings */
-const struct pinmux_config usb_pins[] = {
-	{ pinmux(9), 1, 1 }    /* USB0_DRVVBUS */
-};
-
-#ifdef CONFIG_DAVINCI_MMC
-/* MMC0 pin muxer settings */
-const struct pinmux_config mmc0_pins_8bit[] = {
-	{ pinmux(15), 2, 7 },  /* MMCSD0_CLK */
-	{ pinmux(16), 2, 0 },  /* MMCSD0_CMD */
-	{ pinmux(13), 2, 6 },  /* MMCSD0_DAT_0 */
-	{ pinmux(13), 2, 7 },  /* MMCSD0_DAT_1 */
-	{ pinmux(14), 2, 0 },  /* MMCSD0_DAT_2 */
-	{ pinmux(14), 2, 1 },  /* MMCSD0_DAT_3 */
-	{ pinmux(14), 2, 2 },  /* MMCSD0_DAT_4 */
-	{ pinmux(14), 2, 3 },  /* MMCSD0_DAT_5 */
-	{ pinmux(14), 2, 4 },  /* MMCSD0_DAT_6 */
-	{ pinmux(14), 2, 5 }   /* MMCSD0_DAT_7 */
-	/* DA830 supports 8-bit mode */
-};
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
deleted file mode 100644
index 19730cef8c..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * SoC-specific lowlevel code for DA850
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/arch/da850_lowlevel.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/ddr2_defs.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/pll_defs.h>
-
-void davinci_enable_uart0(void)
-{
-	lpsc_on(DAVINCI_LPSC_UART0);
-
-	/* Bringup UART0 out of reset */
-	REG(UART0_PWREMU_MGMT) = 0x00006001;
-}
-
-#if defined(CONFIG_SYS_DA850_PLL_INIT)
-static void da850_waitloop(unsigned long loopcnt)
-{
-	unsigned long	i;
-
-	for (i = 0; i < loopcnt; i++)
-		asm("   NOP");
-}
-
-static int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
-{
-	if (reg == davinci_pllc0_regs)
-		/* Unlock PLL registers. */
-		clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
-
-	/*
-	 * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
-	 * through MMR
-	 */
-	clrbits_le32(&reg->pllctl, PLLCTL_PLLENSRC);
-	/* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
-	clrbits_le32(&reg->pllctl, PLLCTL_EXTCLKSRC);
-
-	/* Set PLLEN=0 => PLL BYPASS MODE */
-	clrbits_le32(&reg->pllctl, PLLCTL_PLLEN);
-
-	da850_waitloop(150);
-
-	if (reg == davinci_pllc0_regs) {
-		/*
-		 * Select the Clock Mode bit 8 as External Clock or On Chip
-		 * Oscilator
-		 */
-		dv_maskbits(&reg->pllctl, ~PLLCTL_RES_9);
-		setbits_le32(&reg->pllctl,
-			(CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
-	}
-
-	/* Clear PLLRST bit to reset the PLL */
-	clrbits_le32(&reg->pllctl, PLLCTL_PLLRST);
-
-	/* Disable the PLL output */
-	setbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
-
-	/* PLL initialization sequence */
-	/*
-	 * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
-	 * power down bit
-	 */
-	clrbits_le32(&reg->pllctl, PLLCTL_PLLPWRDN);
-
-	/* Enable the PLL from Disable Mode PLLDIS bit to 0 */
-	clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
-
-#if defined(CONFIG_SYS_DA850_PLL0_PREDIV)
-	/* program the prediv */
-	if (reg == davinci_pllc0_regs && CONFIG_SYS_DA850_PLL0_PREDIV)
-		writel((PLL_DIVEN | CONFIG_SYS_DA850_PLL0_PREDIV),
-			&reg->prediv);
-#endif
-
-	/* Program the required multiplier value in PLLM */
-	writel(pllmult, &reg->pllm);
-
-	/* program the postdiv */
-	if (reg == davinci_pllc0_regs)
-		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
-			&reg->postdiv);
-	else
-		writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
-			&reg->postdiv);
-
-	/*
-	 * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
-	 * no GO operation is currently in progress
-	 */
-	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
-		;
-
-	if (reg == davinci_pllc0_regs) {
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, &reg->plldiv1);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, &reg->plldiv2);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, &reg->plldiv3);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, &reg->plldiv4);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, &reg->plldiv5);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, &reg->plldiv6);
-		writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, &reg->plldiv7);
-	} else {
-		writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, &reg->plldiv1);
-		writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, &reg->plldiv2);
-		writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, &reg->plldiv3);
-	}
-
-	/*
-	 * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
-	 * transition.
-	 */
-	setbits_le32(&reg->pllcmd, PLLCMD_GOSTAT);
-
-	/*
-	 * Wait for the GOSTAT bit in PLLSTAT to clear to 0
-	 * (completion of phase alignment).
-	 */
-	while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
-		;
-
-	/* Wait for PLL to reset properly. See PLL spec for PLL reset time */
-	da850_waitloop(200);
-
-	/* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
-	setbits_le32(&reg->pllctl, PLLCTL_PLLRST);
-
-	/* Wait for PLL to lock. See PLL spec for PLL lock time */
-	da850_waitloop(2400);
-
-	/*
-	 * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
-	 * mode
-	 */
-	setbits_le32(&reg->pllctl, PLLCTL_PLLEN);
-
-
-	/*
-	 * clear EMIFA and EMIFB clock source settings, let them
-	 * run off SYSCLK
-	 */
-	if (reg == davinci_pllc0_regs)
-		dv_maskbits(&davinci_syscfg_regs->cfgchip3,
-			~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
-
-	return 0;
-}
-#endif /* CONFIG_SYS_DA850_PLL_INIT */
-
-#if defined(CONFIG_SYS_DA850_DDR_INIT)
-static int da850_ddr_setup(void)
-{
-	unsigned long	tmp;
-
-	/* Enable the Clock to DDR2/mDDR */
-	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
-	tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-	if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
-		/* Begin VTP Calibration */
-		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
-		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-		clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-
-		/* Polling READY bit to see when VTP calibration is done */
-		tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-		while ((tmp & VTP_READY) != VTP_READY)
-			tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-
-		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
-		setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-	}
-	setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
-	writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-
-	if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) {
-		/* DDR2 */
-		clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
-			(1 << DDR_SLEW_DDR_PDENA_BIT) |
-			(1 << DDR_SLEW_CMOSEN_BIT));
-	} else {
-		/* MOBILE DDR */
-		setbits_le32(&davinci_syscfg1_regs->ddr_slew,
-			(1 << DDR_SLEW_DDR_PDENA_BIT) |
-			(1 << DDR_SLEW_CMOSEN_BIT));
-	}
-
-	/*
-	 * SDRAM Configuration Register (SDCR):
-	 * First set the BOOTUNLOCK bit to make configuration bits
-	 * writeable.
-	 */
-	setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
-
-	/*
-	 * Write the new value of these bits and clear BOOTUNLOCK.
-	 * At the same time, set the TIMUNLOCK bit to allow changing
-	 * the timing registers
-	 */
-	tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
-	tmp &= ~DV_DDR_BOOTUNLOCK;
-	tmp |= DV_DDR_TIMUNLOCK;
-	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
-
-	/* write memory configuration and timing */
-	if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) {
-		/* MOBILE DDR only*/
-		writel(CONFIG_SYS_DA850_DDR2_SDBCR2,
-			&dv_ddr2_regs_ctrl->sdbcr2);
-	}
-	writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
-	writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
-	/* clear the TIMUNLOCK bit and write the value of the CL field */
-	tmp &= ~DV_DDR_TIMUNLOCK;
-	writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
-
-	/*
-	 * LPMODEN and MCLKSTOPEN must be set!
-	 * Without this bits set, PSC don;t switch states !!
-	 */
-	writel(CONFIG_SYS_DA850_DDR2_SDRCR |
-		(1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
-		(1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
-		&dv_ddr2_regs_ctrl->sdrcr);
-
-	/* SyncReset the Clock to EMIF3A SDRAM */
-	lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
-	/* Enable the Clock to EMIF3A SDRAM */
-	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
-	/* disable self refresh */
-	clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
-		DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN);
-	writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
-
-	return 0;
-}
-#endif /* CONFIG_SYS_DA850_DDR_INIT */
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
-	return;
-}
-
-int arch_cpu_init(void)
-{
-	/* Unlock kick registers */
-	writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
-	writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
-
-	dv_maskbits(&davinci_syscfg_regs->suspsrc,
-		CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
-
-	/* configure pinmux settings */
-	if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size))
-		return 1;
-
-#if defined(CONFIG_SYS_DA850_PLL_INIT)
-	/* PLL setup */
-	da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
-	da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
-#endif
-	/* setup CSn config */
-#if defined(CONFIG_SYS_DA850_CS2CFG)
-	writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
-#endif
-#if defined(CONFIG_SYS_DA850_CS3CFG)
-	writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
-#endif
-
-	da8xx_configure_lpsc_items(lpsc, lpsc_size);
-
-	/* GPIO setup */
-	board_gpio_init();
-
-
-	NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
-			CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
-	/*
-	 * Fix Power and Emulation Management Register
-	 * see sprufw3a.pdf page 37 Table 24
-	 */
-	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
-		DAVINCI_UART_PWREMU_MGMT_UTRST),
-#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE)
-	       &davinci_uart0_ctrl_regs->pwremu_mgmt);
-#else
-	       &davinci_uart2_ctrl_regs->pwremu_mgmt);
-#endif
-
-#if defined(CONFIG_SYS_DA850_DDR_INIT)
-	da850_ddr_setup();
-#endif
-
-	return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
deleted file mode 100644
index 6105f6390c..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Pinmux configurations for the DA850 SoCs
- *
- * Copyright (C) 2011 OMICRON electronics GmbH
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/davinci_misc.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pinmux_defs.h>
-
-/* SPI pin muxer settings */
-const struct pinmux_config spi1_pins_base[] = {
-	{ pinmux(5), 1, 2 }, /* SPI1_CLK */
-	{ pinmux(5), 1, 4 }, /* SPI1_SOMI */
-	{ pinmux(5), 1, 5 }, /* SPI1_SIMO */
-};
-
-const struct pinmux_config spi1_pins_scs0[] = {
-	{ pinmux(5), 1, 1 }, /* SPI1_SCS[0] */
-};
-
-/* UART pin muxer settings */
-const struct pinmux_config uart0_pins_txrx[] = {
-	{ pinmux(3), 2, 4 }, /* UART0_RXD */
-	{ pinmux(3), 2, 5 }, /* UART0_TXD */
-};
-
-const struct pinmux_config uart0_pins_rtscts[] = {
-	{ pinmux(3), 2, 6 },
-	{ pinmux(3), 2, 7 },
-};
-
-const struct pinmux_config uart1_pins_txrx[] = {
-	{ pinmux(4), 2, 6 }, /* UART1_RXD */
-	{ pinmux(4), 2, 7 }, /* UART1_TXD */
-};
-
-const struct pinmux_config uart2_pins_txrx[] = {
-	{ pinmux(4), 2, 4 }, /* UART2_RXD */
-	{ pinmux(4), 2, 5 }, /* UART2_TXD */
-};
-
-const struct pinmux_config uart2_pins_rtscts[] = {
-	{ pinmux(0), 4, 6 }, /* UART2_RTS */
-	{ pinmux(0), 4, 7 }, /* UART2_CTS */
-};
-
-/* EMAC pin muxer settings*/
-const struct pinmux_config emac_pins_rmii[] = {
-	{ pinmux(14), 8, 2 }, /* RMII_TXD[1] */
-	{ pinmux(14), 8, 3 }, /* RMII_TXD[0] */
-	{ pinmux(14), 8, 4 }, /* RMII_TXEN */
-	{ pinmux(14), 8, 5 }, /* RMII_RXD[1] */
-	{ pinmux(14), 8, 6 }, /* RMII_RXD[0] */
-	{ pinmux(14), 8, 7 }, /* RMII_RXER */
-	{ pinmux(15), 0, 0 }, /* RMII_MHz_50_CLK */
-	{ pinmux(15), 8, 1 }, /* RMII_CRS_DV */
-};
-
-const struct pinmux_config emac_pins_mii[] = {
-	{ pinmux(2), 8, 1 }, /* MII_TXEN */
-	{ pinmux(2), 8, 2 }, /* MII_TXCLK */
-	{ pinmux(2), 8, 3 }, /* MII_COL */
-	{ pinmux(2), 8, 4 }, /* MII_TXD[3] */
-	{ pinmux(2), 8, 5 }, /* MII_TXD[2] */
-	{ pinmux(2), 8, 6 }, /* MII_TXD[1] */
-	{ pinmux(2), 8, 7 }, /* MII_TXD[0] */
-	{ pinmux(3), 8, 0 }, /* MII_RXCLK */
-	{ pinmux(3), 8, 1 }, /* MII_RXDV */
-	{ pinmux(3), 8, 2 }, /* MII_RXER */
-	{ pinmux(3), 8, 3 }, /* MII_CRS */
-	{ pinmux(3), 8, 4 }, /* MII_RXD[3] */
-	{ pinmux(3), 8, 5 }, /* MII_RXD[2] */
-	{ pinmux(3), 8, 6 }, /* MII_RXD[1] */
-	{ pinmux(3), 8, 7 }, /* MII_RXD[0] */
-};
-
-const struct pinmux_config emac_pins_mdio[] = {
-	{ pinmux(4), 8, 0 }, /* MDIO_CLK */
-	{ pinmux(4), 8, 1 }, /* MDIO_D */
-};
-
-/* I2C pin muxer settings */
-const struct pinmux_config i2c0_pins[] = {
-	{ pinmux(4), 2, 2 }, /* I2C0_SCL */
-	{ pinmux(4), 2, 3 }, /* I2C0_SDA */
-};
-
-const struct pinmux_config i2c1_pins[] = {
-	{ pinmux(4), 4, 4 }, /* I2C1_SCL */
-	{ pinmux(4), 4, 5 }, /* I2C1_SDA */
-};
-
-/* EMIFA pin muxer settings */
-const struct pinmux_config emifa_pins_cs2[] = {
-	{ pinmux(7), 1, 0 }, /* EMA_CS2 */
-};
-
-const struct pinmux_config emifa_pins_cs3[] = {
-	{ pinmux(7), 1, 1 }, /* EMA_CS[3] */
-};
-
-const struct pinmux_config emifa_pins_cs4[] = {
-	{ pinmux(7), 1, 2 }, /* EMA_CS[4] */
-};
-
-const struct pinmux_config emifa_pins_nand[] = {
-	{ pinmux(7), 1, 4 },  /* EMA_WE */
-	{ pinmux(7), 1, 5 },  /* EMA_OE */
-	{ pinmux(9), 1, 0 },  /* EMA_D[7] */
-	{ pinmux(9), 1, 1 },  /* EMA_D[6] */
-	{ pinmux(9), 1, 2 },  /* EMA_D[5] */
-	{ pinmux(9), 1, 3 },  /* EMA_D[4] */
-	{ pinmux(9), 1, 4 },  /* EMA_D[3] */
-	{ pinmux(9), 1, 5 },  /* EMA_D[2] */
-	{ pinmux(9), 1, 6 },  /* EMA_D[1] */
-	{ pinmux(9), 1, 7 },  /* EMA_D[0] */
-	{ pinmux(12), 1, 5 }, /* EMA_A[2] */
-	{ pinmux(12), 1, 6 }, /* EMA_A[1] */
-};
-
-/* NOR pin muxer settings */
-const struct pinmux_config emifa_pins_nor[] = {
-	{ pinmux(5), 1, 6 },  /* EMA_BA[1] */
-	{ pinmux(6), 1, 6 },  /* EMA_WAIT[1] */
-	{ pinmux(7), 1, 4 },  /* EMA_WE */
-	{ pinmux(7), 1, 5 },  /* EMA_OE */
-	{ pinmux(8), 1, 0 },  /* EMA_D[15] */
-	{ pinmux(8), 1, 1 },  /* EMA_D[14] */
-	{ pinmux(8), 1, 2 },  /* EMA_D[13] */
-	{ pinmux(8), 1, 3 },  /* EMA_D[12] */
-	{ pinmux(8), 1, 4 },  /* EMA_D[11] */
-	{ pinmux(8), 1, 5 },  /* EMA_D[10] */
-	{ pinmux(8), 1, 6 },  /* EMA_D[9] */
-	{ pinmux(8), 1, 7 },  /* EMA_D[8] */
-	{ pinmux(9), 1, 0 },  /* EMA_D[7] */
-	{ pinmux(9), 1, 1 },  /* EMA_D[6] */
-	{ pinmux(9), 1, 2 },  /* EMA_D[5] */
-	{ pinmux(9), 1, 3 },  /* EMA_D[4] */
-	{ pinmux(9), 1, 4 },  /* EMA_D[3] */
-	{ pinmux(9), 1, 5 },  /* EMA_D[2] */
-	{ pinmux(9), 1, 6 },  /* EMA_D[1] */
-	{ pinmux(9), 1, 7 },  /* EMA_D[0] */
-	{ pinmux(10), 1, 1 }, /* EMA_A[22] */
-	{ pinmux(10), 1, 2 }, /* EMA_A[21] */
-	{ pinmux(10), 1, 3 }, /* EMA_A[20] */
-	{ pinmux(10), 1, 4 }, /* EMA_A[19] */
-	{ pinmux(10), 1, 5 }, /* EMA_A[18] */
-	{ pinmux(10), 1, 6 }, /* EMA_A[17] */
-	{ pinmux(10), 1, 7 }, /* EMA_A[16] */
-	{ pinmux(11), 1, 0 }, /* EMA_A[15] */
-	{ pinmux(11), 1, 1 }, /* EMA_A[14] */
-	{ pinmux(11), 1, 2 }, /* EMA_A[13] */
-	{ pinmux(11), 1, 3 }, /* EMA_A[12] */
-	{ pinmux(11), 1, 4 }, /* EMA_A[11] */
-	{ pinmux(11), 1, 5 }, /* EMA_A[10] */
-	{ pinmux(11), 1, 6 }, /* EMA_A[9] */
-	{ pinmux(11), 1, 7 }, /* EMA_A[8] */
-	{ pinmux(12), 1, 0 }, /* EMA_A[7] */
-	{ pinmux(12), 1, 1 }, /* EMA_A[6] */
-	{ pinmux(12), 1, 2 }, /* EMA_A[5] */
-	{ pinmux(12), 1, 3 }, /* EMA_A[4] */
-	{ pinmux(12), 1, 4 }, /* EMA_A[3] */
-	{ pinmux(12), 1, 5 }, /* EMA_A[2] */
-	{ pinmux(12), 1, 6 }, /* EMA_A[1] */
-	{ pinmux(12), 1, 7 }, /* EMA_A[0] */
-};
-
-/* MMC0 pin muxer settings */
-const struct pinmux_config mmc0_pins[] = {
-	{ pinmux(10), 2, 0 },	/* MMCSD0_CLK */
-	{ pinmux(10), 2, 1 },	/* MMCSD0_CMD */
-	{ pinmux(10), 2, 2 },	/* MMCSD0_DAT_0 */
-	{ pinmux(10), 2, 3 },	/* MMCSD0_DAT_1 */
-	{ pinmux(10), 2, 4 },	/* MMCSD0_DAT_2 */
-	{ pinmux(10), 2, 5 },	/* MMCSD0_DAT_3 */
-	/* DA850 supports only 4-bit mode, remaining pins are not configured */
-};
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm355.c b/arch/arm/cpu/arm926ejs/davinci/dm355.c
deleted file mode 100644
index f9550a16d3..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm355.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * SoC-specific code for tms320dm355 and similar chips
- *
- * Copyright (C) 2009 David Brownell
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-void davinci_enable_uart0(void)
-{
-	lpsc_on(DAVINCI_LPSC_UART0);
-
-	/* Bringup UART0 out of reset */
-	REG(UART0_PWREMU_MGMT) = 0x00006001;
-}
-
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
-	lpsc_on(DAVINCI_LPSC_I2C);
-
-	/* Enable I2C pin Mux */
-	REG(PINMUX3) |= (1 << 20) | (1 << 19);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365.c b/arch/arm/cpu/arm926ejs/davinci/dm365.c
deleted file mode 100644
index f6ca527e74..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm365.c
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * SoC-specific code for tms320dm365 and similar chips
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
-	lpsc_on(DAVINCI_LPSC_UART0);
-}
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
-	lpsc_on(DAVINCI_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
deleted file mode 100644
index c8b44988d3..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ /dev/null
@@ -1,460 +0,0 @@
-/*
- * SoC-specific lowlevel code for tms320dm365 and similar chips
- * Actually used for booting from NAND with nand_spl.
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/dm365_lowlevel.h>
-#include <asm/arch/hardware.h>
-
-void dm365_waitloop(unsigned long loopcnt)
-{
-	unsigned long	i;
-
-	for (i = 0; i < loopcnt; i++)
-		asm("   NOP");
-}
-
-int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
-{
-	unsigned int clksrc = 0x0;
-
-	/* Power up the PLL */
-	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
-
-	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
-	setbits_le32(&dv_pll0_regs->pllctl,
-		clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
-	/*
-	 * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
-	 * through MMR
-	 */
-	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLENSRC);
-
-	/* Set PLLEN=0 => PLL BYPASS MODE */
-	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
-	dm365_waitloop(150);
-
-	 /* PLLRST=1(reset assert) */
-	setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
-	dm365_waitloop(300);
-
-	/*Bring PLL out of Reset*/
-	clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLRST);
-
-	/* Program the Multiper and Pre-Divider for PLL1 */
-	writel(pllmult, &dv_pll0_regs->pllm);
-	writel(prediv, &dv_pll0_regs->prediv);
-
-	/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
-		PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
-	/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
-		&dv_pll0_regs->secctl);
-	/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
-	writel(PLLSECCTL_STOPMODE, &dv_pll0_regs->secctl);
-	/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
-
-	/* Program the PostDiv for PLL1 */
-	writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
-
-	/* Post divider setting for PLL1 */
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV2, &dv_pll0_regs->plldiv2);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV3, &dv_pll0_regs->plldiv3);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV4, &dv_pll0_regs->plldiv4);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV5, &dv_pll0_regs->plldiv5);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV6, &dv_pll0_regs->plldiv6);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV7, &dv_pll0_regs->plldiv7);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV8, &dv_pll0_regs->plldiv8);
-	writel(CONFIG_SYS_DM36x_PLL1_PLLDIV9, &dv_pll0_regs->plldiv9);
-
-	dm365_waitloop(300);
-
-	/* Set the GOSET bit */
-	writel(PLLCMD_GOSET, &dv_pll0_regs->pllcmd); /* Go */
-
-	dm365_waitloop(300);
-
-	/* Wait for PLL to LOCK */
-	while (!((readl(&dv_sys_module_regs->pll0_config) & PLL0_LOCK)
-		== PLL0_LOCK))
-		;
-
-	/* Enable the PLL Bit of PLLCTL*/
-	setbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLEN);
-
-	return 0;
-}
-
-int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
-{
-	unsigned int clksrc = 0x0;
-
-	/* Power up the PLL*/
-	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLPWRDN);
-
-	/*
-	 * Select the Clock Mode as Onchip Oscilator or External Clock on
-	 * MXI pin
-	 * VDB has input on MXI pin
-	 */
-	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
-	setbits_le32(&dv_pll1_regs->pllctl,
-		clksrc << PLLCTL_CLOCK_MODE_SHIFT);
-
-	/*
-	 * Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
-	 * through MMR
-	 */
-	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLENSRC);
-
-	/* Set PLLEN=0 => PLL BYPASS MODE */
-	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
-	dm365_waitloop(50);
-
-	 /* PLLRST=1(reset assert) */
-	setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
-	dm365_waitloop(300);
-
-	/* Bring PLL out of Reset */
-	clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLRST);
-
-	/* Program the Multiper and Pre-Divider for PLL2 */
-	writel(pllm, &dv_pll1_regs->pllm);
-	writel(prediv, &dv_pll1_regs->prediv);
-
-	writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
-
-	/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
-		PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
-	/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 0 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE,
-		&dv_pll1_regs->secctl);
-	/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 0 */
-	writel(PLLSECCTL_STOPMODE, &dv_pll1_regs->secctl);
-	/* Assert TENABLE = 0, TENABLEDIV = 0, TINITZ = 1 */
-	writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll1_regs->secctl);
-
-	/* Post divider setting for PLL2 */
-	writel(CONFIG_SYS_DM36x_PLL2_PLLDIV1, &dv_pll1_regs->plldiv1);
-	writel(CONFIG_SYS_DM36x_PLL2_PLLDIV2, &dv_pll1_regs->plldiv2);
-	writel(CONFIG_SYS_DM36x_PLL2_PLLDIV3, &dv_pll1_regs->plldiv3);
-	writel(CONFIG_SYS_DM36x_PLL2_PLLDIV4, &dv_pll1_regs->plldiv4);
-	writel(CONFIG_SYS_DM36x_PLL2_PLLDIV5, &dv_pll1_regs->plldiv5);
-
-	/* GoCmd for PostDivider to take effect */
-	writel(PLLCMD_GOSET, &dv_pll1_regs->pllcmd);
-
-	dm365_waitloop(150);
-
-	/* Wait for PLL to LOCK */
-	while (!((readl(&dv_sys_module_regs->pll1_config) & PLL1_LOCK)
-		== PLL1_LOCK))
-		;
-
-	dm365_waitloop(4100);
-
-	/* Enable the PLL2 */
-	setbits_le32(&dv_pll1_regs->pllctl, PLLCTL_PLLEN);
-
-	/* do this after PLL's have been set up */
-	writel(CONFIG_SYS_DM36x_PERI_CLK_CTRL,
-		&dv_sys_module_regs->peri_clkctl);
-
-	return 0;
-}
-
-int dm365_ddr_setup(void)
-{
-	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-	clrbits_le32(&dv_sys_module_regs->vtpiocr,
-		VPTIO_IOPWRDN | VPTIO_CLRZ | VPTIO_LOCK | VPTIO_PWRDN);
-
-	/* Set bit CLRZ (bit 13) */
-	setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_CLRZ);
-
-	/* Check VTP READY Status */
-	while (!(readl(&dv_sys_module_regs->vtpiocr) & VPTIO_RDY))
-		;
-
-	/* Set bit VTP_IOPWRDWN bit 14 for DDR input buffers) */
-	setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_IOPWRDN);
-
-	/* Set bit LOCK(bit7) */
-	setbits_le32(&dv_sys_module_regs->vtpiocr, VPTIO_LOCK);
-
-	/*
-	 * Powerdown VTP as it is locked (bit 6)
-	 * Set bit VTP_IOPWRDWN bit 14 for DDR input buffers)
-	 */
-	setbits_le32(&dv_sys_module_regs->vtpiocr,
-		VPTIO_IOPWRDN | VPTIO_PWRDN);
-
-	/* Wait for calibration to complete */
-	dm365_waitloop(150);
-
-	/* Set the DDR2 to synreset, then enable it again */
-	lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
-	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
-	writel(CONFIG_SYS_DM36x_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
-
-	/* Program SDRAM Bank Config Register */
-	writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_BOOTUNLOCK),
-		&dv_ddr2_regs_ctrl->sdbcr);
-	writel((CONFIG_SYS_DM36x_DDR2_SDBCR | DV_DDR_TIMUNLOCK),
-		&dv_ddr2_regs_ctrl->sdbcr);
-
-	/* Program SDRAM Timing Control Register1 */
-	writel(CONFIG_SYS_DM36x_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
-	/* Program SDRAM Timing Control Register2 */
-	writel(CONFIG_SYS_DM36x_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
-	writel(CONFIG_SYS_DM36x_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
-
-	writel(CONFIG_SYS_DM36x_DDR2_SDBCR, &dv_ddr2_regs_ctrl->sdbcr);
-
-	/* Program SDRAM Refresh Control Register */
-	writel(CONFIG_SYS_DM36x_DDR2_SDRCR, &dv_ddr2_regs_ctrl->sdrcr);
-
-	lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
-	lpsc_on(DAVINCI_LPSC_DDR_EMIF);
-
-	return 0;
-}
-
-static void dm365_vpss_sync_reset(void)
-{
-	unsigned int PdNum = 0;
-
-	/* VPSS_CLKMD 1:1 */
-	setbits_le32(&dv_sys_module_regs->vpss_clkctl,
-		VPSS_CLK_CTL_VPSS_CLKMD);
-
-	/* LPSC SyncReset DDR Clock Enable */
-	writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
-		~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
-		&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
-
-	writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
-	while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
-		;
-	while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
-		PSC_MD_STATE_MSK) == PSC_SYNCRESET))
-		;
-}
-
-static void dm365_por_reset(void)
-{
-	struct davinci_timer *wdog =
-		(struct davinci_timer *)DAVINCI_WDOG_BASE;
-
-	if (readl(&dv_pll0_regs->rstype) &
-		(PLL_RSTYPE_POR | PLL_RSTYPE_XWRST)) {
-		dm365_vpss_sync_reset();
-
-		writel(DV_TMPBUF_VAL, TMPBUF);
-		setbits_le32(TMPSTATUS, FLAG_PORRST);
-		writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
-		writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
-		while (1);
-	}
-}
-
-static void dm365_wdt_reset(void)
-{
-	struct davinci_timer *wdog =
-		(struct davinci_timer *)DAVINCI_WDOG_BASE;
-
-	if (readl(TMPBUF) != DV_TMPBUF_VAL) {
-		writel(DV_TMPBUF_VAL, TMPBUF);
-		setbits_le32(TMPSTATUS, FLAG_PORRST);
-		setbits_le32(TMPSTATUS, FLAG_FLGOFF);
-
-		dm365_waitloop(100);
-
-		dm365_vpss_sync_reset();
-
-		writel(DV_WDT_ENABLE_SYS_RESET, &wdog->na1);
-		writel(DV_WDT_TRIGGER_SYS_RESET, &wdog->na2);
-
-		while (1);
-	}
-}
-
-static void dm365_wdt_flag_on(void)
-{
-	/* VPSS_CLKMD 1:2 */
-	clrbits_le32(&dv_sys_module_regs->vpss_clkctl,
-		VPSS_CLK_CTL_VPSS_CLKMD);
-	writel(0, TMPBUF);
-	setbits_le32(TMPSTATUS, FLAG_FLGON);
-}
-
-void dm365_psc_init(void)
-{
-	unsigned char i = 0;
-	unsigned char lpsc_start;
-	unsigned char lpsc_end, lpscgroup, lpscmin, lpscmax;
-	unsigned int  PdNum = 0;
-
-	lpscmin = 0;
-	lpscmax = 2;
-
-	for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
-		if (lpscgroup == 0) {
-			/* Enabling LPSC 3 to 28 SCR first */
-			lpsc_start = DAVINCI_LPSC_VPSSMSTR;
-			lpsc_end   = DAVINCI_LPSC_TIMER1;
-		} else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
-			lpsc_start = DAVINCI_LPSC_CFG5;
-			lpsc_end   = DAVINCI_LPSC_VPSSMASTER;
-		} else {
-			lpsc_start = DAVINCI_LPSC_MJCP;
-			lpsc_end   = DAVINCI_LPSC_HDVICP;
-		}
-
-		/* NEXT=0x3, Enable LPSC's */
-		for (i = lpsc_start; i <= lpsc_end; i++)
-			setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
-
-		/*
-		 * Program goctl to start transition sequence for LPSCs
-		 * CSL_PSC_0_REGS->PTCMD = (1<<PdNum); Kick off Power
-		 * Domain 0 Modules
-		 */
-		writel((1 << PdNum), &dv_psc_regs->ptcmd);
-
-		/*
-		 * Wait for GOSTAT = NO TRANSITION from PSC for Powerdomain 0
-		 */
-		while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT)
-			== 0))
-			;
-
-		/* Wait for MODSTAT = ENABLE from LPSC's */
-		for (i = lpsc_start; i <= lpsc_end; i++)
-			while (!((readl(&dv_psc_regs->mdstat[i]) &
-				PSC_MD_STATE_MSK) == PSC_ENABLE))
-				;
-	}
-}
-
-static void dm365_emif_init(void)
-{
-	writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
-	writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
-
-	setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
-
-	writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
-
-	return;
-}
-
-void dm365_pinmux_ctl(unsigned long offset, unsigned long mask,
-	unsigned long value)
-{
-	clrbits_le32(&dv_sys_module_regs->pinmux[offset], mask);
-	setbits_le32(&dv_sys_module_regs->pinmux[offset], (mask & value));
-}
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
-	return;
-}
-
-#if defined(CONFIG_POST)
-int post_log(char *format, ...)
-{
-	return 0;
-}
-#endif
-
-void dm36x_lowlevel_init(ulong bootflag)
-{
-	struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
-		(struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
-		DAVINCI_UART_CTRL_BASE);
-
-	/* Mask all interrupts */
-	writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
-	writel(0x0, &dv_aintc_regs->eabase);
-	writel(0x0, &dv_aintc_regs->eint0);
-	writel(0x0, &dv_aintc_regs->eint1);
-
-	/* Clear all interrupts */
-	writel(0xffffffff, &dv_aintc_regs->fiq0);
-	writel(0xffffffff, &dv_aintc_regs->fiq1);
-	writel(0xffffffff, &dv_aintc_regs->irq0);
-	writel(0xffffffff, &dv_aintc_regs->irq1);
-
-	dm365_por_reset();
-	dm365_wdt_reset();
-
-	/* System PSC setup - enable all */
-	dm365_psc_init();
-
-	/* Setup Pinmux */
-	dm365_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX0);
-	dm365_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX1);
-	dm365_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX2);
-	dm365_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX3);
-	dm365_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DM36x_PINMUX4);
-
-	/* PLL setup */
-	dm365_pll1_init(CONFIG_SYS_DM36x_PLL1_PLLM,
-		CONFIG_SYS_DM36x_PLL1_PREDIV);
-	dm365_pll2_init(CONFIG_SYS_DM36x_PLL2_PLLM,
-		CONFIG_SYS_DM36x_PLL2_PREDIV);
-
-	/* GPIO setup */
-	board_gpio_init();
-
-	NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
-			CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
-	/*
-	 * Fix Power and Emulation Management Register
-	 * see sprufh2.pdf page 38 Table 22
-	 */
-	writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
-		DAVINCI_UART_PWREMU_MGMT_UTRST),
-	       &davinci_uart_ctrl_regs->pwremu_mgmt);
-
-	puts("ddr init\n");
-	dm365_ddr_setup();
-
-	puts("emif init\n");
-	dm365_emif_init();
-
-	dm365_wdt_flag_on();
-
-#if defined(CONFIG_POST)
-	/*
-	 * Do memory tests, calls arch_memory_failure_handle()
-	 * if error detected.
-	 */
-	memory_post_test(0);
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm644x.c b/arch/arm/cpu/arm926ejs/davinci/dm644x.c
deleted file mode 100644
index c58e271e28..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm644x.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * SoC-specific code for tms320dm644x chips
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-
-#define PINMUX0_EMACEN (1 << 31)
-#define PINMUX0_AECS5  (1 << 11)
-#define PINMUX0_AECS4  (1 << 10)
-
-#define PINMUX1_I2C    (1 <<  7)
-#define PINMUX1_UART1  (1 <<  1)
-#define PINMUX1_UART0  (1 <<  0)
-
-
-void davinci_enable_uart0(void)
-{
-	lpsc_on(DAVINCI_LPSC_UART0);
-
-	/* Bringup UART0 out of reset */
-	REG(UART0_PWREMU_MGMT) = 0x00006001;
-
-	/* Enable UART0 MUX lines */
-	REG(PINMUX1) |= PINMUX1_UART0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
-	lpsc_on(DAVINCI_LPSC_EMAC);
-	lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
-	lpsc_on(DAVINCI_LPSC_MDIO);
-
-	/* Enable GIO3.3V cells used for EMAC */
-	REG(VDD3P3V_PWDN) = 0;
-
-	/* Enable EMAC. */
-	REG(PINMUX0) |= PINMUX0_EMACEN;
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
-	lpsc_on(DAVINCI_LPSC_I2C);
-
-	/* Enable I2C pin Mux */
-	REG(PINMUX1) |= PINMUX1_I2C;
-}
-#endif
-
-void davinci_errata_workarounds(void)
-{
-	/*
-	 * Workaround for TMS320DM6446 errata 1.3.22:
-	 *   PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
-	 *   Revision(s) Affected: 1.3 and earlier
-	 */
-	REG(PSC_SILVER_BULLET) = 0;
-
-	/*
-	 * Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
-	 * as suggested in TMS320DM6446 errata 2.1.2:
-	 *
-	 * On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
-	 * low priority modules can occupy the bus and prevent high priority
-	 * modules like the VPSS from getting the required DDR2 throughput.
-	 * A hex value of 0x20 should provide a good ARM (cache enabled)
-	 * performance and still allow good utilization by the VPSS or other
-	 * modules.
-	 */
-	REG(VBPR) = 0x20;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm646x.c b/arch/arm/cpu/arm926ejs/davinci/dm646x.c
deleted file mode 100644
index cfea8300de..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dm646x.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * SoC-specific code for TMS320DM646x chips
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/arch/hardware.h>
-
-void davinci_enable_uart0(void)
-{
-	lpsc_on(DAVINCI_DM646X_LPSC_UART0);
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-void davinci_enable_emac(void)
-{
-	lpsc_on(DAVINCI_DM646X_LPSC_EMAC);
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_DAVINCI
-void davinci_enable_i2c(void)
-{
-	lpsc_on(DAVINCI_DM646X_LPSC_I2C);
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/dp83848.c b/arch/arm/cpu/arm926ejs/davinci/dp83848.c
deleted file mode 100644
index 603d507c70..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/dp83848.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <dp83848.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int dp83848_is_phy_connected(int phy_addr)
-{
-	u_int16_t	id1, id2;
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
-		return(0);
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
-		return(0);
-
-	if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
-		return(1);
-
-	return(0);
-}
-
-int dp83848_get_link_speed(int phy_addr)
-{
-	u_int16_t		tmp;
-	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
-		return(0);
-
-	if (!(tmp & DP83848_LINK_STATUS))	/* link up? */
-		return(0);
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
-		return(0);
-
-	/* Speed doesn't matter, there is no setting for it in EMAC... */
-	if (tmp & DP83848_DUPLEX) {
-		/* set DM644x EMAC for Full Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
-			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
-	} else {
-		/*set DM644x EMAC for Half Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
-	}
-
-	return(1);
-}
-
-
-int dp83848_init_phy(int phy_addr)
-{
-	int	ret = 1;
-
-	if (!dp83848_get_link_speed(phy_addr)) {
-		/* Try another time */
-		udelay(100000);
-		ret = dp83848_get_link_speed(phy_addr);
-	}
-
-	/* Disable PHY Interrupts */
-	davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
-
-	return(ret);
-}
-
-
-int dp83848_auto_negotiate(int phy_addr)
-{
-	u_int16_t	tmp;
-
-
-	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
-		return(0);
-
-	/* Restart Auto_negotiation  */
-	tmp &= ~DP83848_AUTONEG;	/* remove autonegotiation enable */
-	tmp |= DP83848_ISOLATE;		/* Electrically isolate PHY */
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/* Set the Auto_negotiation Advertisement Register
-	 * MII advertising for Next page, 100BaseTxFD and HD,
-	 * 10BaseTFD and HD, IEEE 802.3
-	 */
-	tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
-		DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
-	davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
-
-
-	/* Read Control Register */
-	if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
-		return(0);
-
-	tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/* Restart Auto_negotiation  */
-	tmp |= DP83848_RESTART_AUTONEG;
-	davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
-
-	/*check AutoNegotiate complete */
-	udelay(10000);
-	if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
-		return(0);
-
-	if (!(tmp & DP83848_AUTONEG_COMP))
-		return(0);
-
-	return (dp83848_get_link_speed(phy_addr));
-}
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/et1011c.c b/arch/arm/cpu/arm926ejs/davinci/et1011c.c
deleted file mode 100644
index 9d53875b93..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/et1011c.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * LSI ET1011C PHY Driver for TI DaVinci(TMS320DM6467) board.
- *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-/* LSI PHYSICAL LAYER TRANSCEIVER ET1011C */
-
-#define MII_PHY_CONFIG_REG		22
-
-/* PHY Config bits */
-#define PHY_SYS_CLK_EN			(1 << 4)
-
-int et1011c_get_link_speed(int phy_addr)
-{
-	u_int16_t	data;
-
-	if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &data) && (data & 0x04)) {
-		davinci_eth_phy_read(phy_addr, MII_PHY_CONFIG_REG, &data);
-		/* Enable 125MHz clock sourced from PHY */
-		davinci_eth_phy_write(phy_addr, MII_PHY_CONFIG_REG,
-			data | PHY_SYS_CLK_EN);
-		return (1);
-	}
-	return (0);
-}
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c b/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
deleted file mode 100644
index 4af5dd2135..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Micrel KSZ8873 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2011 Heiko Schocher <hsdenx.de>
- *
- * based on:
- * National Semiconductor DP83848 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <miiphy.h>
-#include <net.h>
-#include <asm/arch/emac_defs.h>
-#include <asm/io.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-int ksz8873_is_phy_connected(int phy_addr)
-{
-	u_int16_t	dummy;
-
-	return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
-}
-
-int ksz8873_get_link_speed(int phy_addr)
-{
-	emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
-	/* we always have a link to the switch, 100 FD */
-	writel((EMAC_MACCONTROL_MIIEN_ENABLE |
-		EMAC_MACCONTROL_FULLDUPLEX_ENABLE),
-	       &emac->MACCONTROL);
-	return 1;
-}
-
-
-int ksz8873_init_phy(int phy_addr)
-{
-	return 1;
-}
-
-
-int ksz8873_auto_negotiate(int phy_addr)
-{
-	return dp83848_get_link_speed(phy_addr);
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S b/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
deleted file mode 100644
index e91623497c..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S
+++ /dev/null
@@ -1,693 +0,0 @@
-/*
- * Low-level board setup code for TI DaVinci SoC based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * Partially based on TI sources, original copyrights follow:
- */
-
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
- *
- * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
- *
- * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005
- *
- * Modified for DV-EVM board by Swaminathan S, Nov 2005
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <config.h>
-
-#define MDSTAT_STATE	0x3f
-
-.globl	lowlevel_init
-lowlevel_init:
-#ifdef CONFIG_SOC_DM644X
-
-	/*-------------------------------------------------------*
-	 * Mask all IRQs by setting all bits in the EINT default *
-	 *-------------------------------------------------------*/
-	mov	r1, $0
-	ldr	r0, =EINT_ENABLE0
-	str	r1, [r0]
-	ldr	r0, =EINT_ENABLE1
-	str	r1, [r0]
-
-	/*------------------------------------------------------*
-	 * Put the GEM in reset					*
-	 *------------------------------------------------------*/
-
-	/* Put the GEM in reset */
-	ldr	r8, PSC_GEM_FLAG_CLEAR
-	ldr	r6, MDCTL_GEM
-	ldr	r7, [r6]
-	and	r7, r7, r8
-	str	r7, [r6]
-
-	/* Enable the Power Domain Transition Command */
-	ldr	r6, PTCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x02
-	str	r7, [r6]
-
-	/* Check for Transition Complete(PTSTAT) */
-checkStatClkStopGem:
-	ldr	r6, PTSTAT
-	ldr	r7, [r6]
-	ands	r7, r7, $0x02
-	bne	checkStatClkStopGem
-
-	/* Check for GEM Reset Completion */
-checkGemStatClkStop:
-	ldr	r6, MDSTAT_GEM
-	ldr	r7, [r6]
-	ands	r7, r7, $0x100
-	bne	checkGemStatClkStop
-
-	/* Do this for enabling a WDT initiated reset this is a workaround
-	   for a chip bug.  Not required under normal situations */
-	ldr	r6, P1394
-	mov	r10, $0
-	str	r10, [r6]
-
-	/*------------------------------------------------------*
-	 * Enable L1 & L2 Memories in Fast mode                 *
-	 *------------------------------------------------------*/
-	ldr	r6, DFT_ENABLE
-	mov	r10, $0x01
-	str	r10, [r6]
-
-	ldr	r6, MMARG_BRF0
-	ldr	r10, MMARG_BRF0_VAL
-	str	r10, [r6]
-
-	ldr	r6, DFT_ENABLE
-	mov	r10, $0
-	str	r10, [r6]
-
-	/*------------------------------------------------------*
-	 * DDR2 PLL Initialization				*
-	 *------------------------------------------------------*/
-
-	/* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
-	mov	r10, $0
-	ldr	r6, PLL2_CTL
-	ldr	r7, PLL_CLKSRC_MASK
-	ldr	r8, [r6]
-	and	r8, r8, r7
-	mov	r9, r10, lsl $8
-	orr	r8, r8, r9
-	str	r8, [r6]
-
-	/* Select the PLLEN source */
-	ldr	r7, PLL_ENSRC_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Bypass the PLL */
-	ldr	r7, PLL_BYPASS_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
-	mov	r10, $0x20
-WaitPPL2Loop:
-	subs	r10, r10, $1
-	bne	WaitPPL2Loop
-
-	/* Reset the PLL */
-	ldr	r7, PLL_RESET_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Power up the PLL */
-	ldr	r7, PLL_PWRUP_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Enable the PLL from Disable Mode */
-	ldr	r7, PLL_DISABLE_ENABLE_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Program the PLL Multiplier */
-	ldr	r6, PLL2_PLLM
-	mov	r2, $0x17	/* 162 MHz */
-	str	r2, [r6]
-
-	/* Program the PLL2 Divisor Value */
-	ldr	r6, PLL2_DIV2
-	mov	r3, $0x01
-	str	r3, [r6]
-
-	/* Program the PLL2 Divisor Value */
-	ldr	r6, PLL2_DIV1
-	mov	r4, $0x0b	/* 54 MHz */
-	str	r4, [r6]
-
-	/* PLL2 DIV2 MMR */
-	ldr	r8, PLL2_DIV_MASK
-	ldr	r6, PLL2_DIV2
-	ldr	r9, [r6]
-	and	r8, r8, r9
-	mov	r9, $0x01
-	mov	r9, r9, lsl $15
-	orr	r8, r8, r9
-	str	r8, [r6]
-
-	/* Program the GOSET bit to take new divider values */
-	ldr	r6, PLL2_PLLCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Wait for Done */
-	ldr	r6, PLL2_PLLSTAT
-doneLoop_0:
-	ldr	r7, [r6]
-	ands	r7, r7, $0x01
-	bne	doneLoop_0
-
-	/* PLL2 DIV1 MMR */
-	ldr	r8, PLL2_DIV_MASK
-	ldr	r6, PLL2_DIV1
-	ldr	r9, [r6]
-	and	r8, r8, r9
-	mov	r9, $0x01
-	mov	r9, r9, lsl $15
-	orr	r8, r8, r9
-	str	r8, [r6]
-
-	/* Program the GOSET bit to take new divider values */
-	ldr	r6, PLL2_PLLCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Wait for Done */
-	ldr	r6, PLL2_PLLSTAT
-doneLoop:
-	ldr	r7, [r6]
-	ands	r7, r7, $0x01
-	bne	doneLoop
-
-	/* Wait for PLL to Reset Properly */
-	mov	r10, $0x218
-ResetPPL2Loop:
-	subs	r10, r10, $1
-	bne	ResetPPL2Loop
-
-	/* Bring PLL out of Reset */
-	ldr	r6, PLL2_CTL
-	ldr	r8, [r6]
-	orr	r8, r8, $0x08
-	str	r8, [r6]
-
-	/* Wait for PLL to Lock */
-	ldr	r10, PLL_LOCK_COUNT
-PLL2Lock:
-	subs	r10, r10, $1
-	bne	PLL2Lock
-
-	/* Enable the PLL */
-	ldr	r6, PLL2_CTL
-	ldr	r8, [r6]
-	orr	r8, r8, $0x01
-	str	r8, [r6]
-
-	/*------------------------------------------------------*
-	 * Issue Soft Reset to DDR Module			*
-	 *------------------------------------------------------*/
-
-	/* Shut down the DDR2 LPSC Module */
-	ldr	r8, PSC_FLAG_CLEAR
-	ldr	r6, MDCTL_DDR2
-	ldr	r7, [r6]
-	and	r7, r7, r8
-	orr	r7, r7, $0x03
-	str	r7, [r6]
-
-	/* Enable the Power Domain Transition Command */
-	ldr	r6, PTCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Check for Transition Complete(PTSTAT) */
-checkStatClkStop:
-	ldr	r6, PTSTAT
-	ldr	r7, [r6]
-	ands	r7, r7, $0x01
-	bne	checkStatClkStop
-
-	/* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop:
-	ldr	r6, MDSTAT_DDR2
-	ldr	r7, [r6]
-	and	r7, r7, $MDSTAT_STATE
-	cmp	r7, $0x03
-	bne	checkDDRStatClkStop
-
-	/*------------------------------------------------------*
-	 * Program DDR2 MMRs for 162MHz Setting			*
-	 *------------------------------------------------------*/
-
-	/* Program PHY Control Register */
-	ldr	r6, DDRCTL
-	ldr	r7, DDRCTL_VAL
-	str	r7, [r6]
-
-	/* Program SDRAM Bank Config Register */
-	ldr	r6, SDCFG
-	ldr	r7, SDCFG_VAL
-	str	r7, [r6]
-
-	/* Program SDRAM TIM-0 Config Register */
-	ldr	r6, SDTIM0
-	ldr	r7, SDTIM0_VAL_162MHz
-	str	r7, [r6]
-
-	/* Program SDRAM TIM-1 Config Register */
-	ldr	r6, SDTIM1
-	ldr	r7, SDTIM1_VAL_162MHz
-	str	r7, [r6]
-
-	/* Program the SDRAM Bank Config Control Register */
-	ldr	r10, MASK_VAL
-	ldr	r8, SDCFG
-	ldr	r9, SDCFG_VAL
-	and	r9, r9, r10
-	str	r9, [r8]
-
-	/* Program SDRAM SDREF Config Register */
-	ldr	r6, SDREF
-	ldr	r7, SDREF_VAL
-	str	r7, [r6]
-
-	/*------------------------------------------------------*
-	 * Issue Soft Reset to DDR Module			*
-	 *------------------------------------------------------*/
-
-	/* Issue a Dummy DDR2 read/write */
-	ldr	r8, DDR2_START_ADDR
-	ldr	r7, DUMMY_VAL
-	str	r7, [r8]
-	ldr	r7, [r8]
-
-	/* Shut down the DDR2 LPSC Module */
-	ldr	r8, PSC_FLAG_CLEAR
-	ldr	r6, MDCTL_DDR2
-	ldr	r7, [r6]
-	and	r7, r7, r8
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Enable the Power Domain Transition Command */
-	ldr	r6, PTCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Check for Transition Complete(PTSTAT) */
-checkStatClkStop2:
-	ldr	r6, PTSTAT
-	ldr	r7, [r6]
-	ands	r7, r7, $0x01
-	bne	checkStatClkStop2
-
-	/* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkStop2:
-	ldr	r6, MDSTAT_DDR2
-	ldr	r7, [r6]
-	and	r7, r7, $MDSTAT_STATE
-	cmp	r7, $0x01
-	bne	checkDDRStatClkStop2
-
-	/*------------------------------------------------------*
-	 * Turn DDR2 Controller Clocks On			*
-	 *------------------------------------------------------*/
-
-	/* Enable the DDR2 LPSC Module */
-	ldr	r6, MDCTL_DDR2
-	ldr	r7, [r6]
-	orr	r7, r7, $0x03
-	str	r7, [r6]
-
-	/* Enable the Power Domain Transition Command */
-	ldr	r6, PTCMD
-	ldr	r7, [r6]
-	orr	r7, r7, $0x01
-	str	r7, [r6]
-
-	/* Check for Transition Complete(PTSTAT) */
-checkStatClkEn2:
-	ldr	r6, PTSTAT
-	ldr	r7, [r6]
-	ands	r7, r7, $0x01
-	bne	checkStatClkEn2
-
-	/* Check for DDR2 Controller Enable Completion */
-checkDDRStatClkEn2:
-	ldr	r6, MDSTAT_DDR2
-	ldr	r7, [r6]
-	and	r7, r7, $MDSTAT_STATE
-	cmp	r7, $0x03
-	bne	checkDDRStatClkEn2
-
-	/*  DDR Writes and Reads */
-	ldr	r6, CFGTEST
-	mov	r3, $0x01
-	str	r3, [r6]
-
-	/*------------------------------------------------------*
-	 * System PLL Initialization				*
-	 *------------------------------------------------------*/
-
-	/* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
-	mov	r2, $0
-	ldr	r6, PLL1_CTL
-	ldr	r7, PLL_CLKSRC_MASK
-	ldr	r8, [r6]
-	and	r8, r8, r7
-	mov	r9, r2, lsl $8
-	orr	r8, r8, r9
-	str	r8, [r6]
-
-	/* Select the PLLEN source */
-	ldr	r7, PLL_ENSRC_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Bypass the PLL */
-	ldr	r7, PLL_BYPASS_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
-	mov	r10, $0x20
-
-WaitLoop:
-	subs	r10, r10, $1
-	bne	WaitLoop
-
-	/* Reset the PLL */
-	ldr	r7, PLL_RESET_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Disable the PLL */
-	orr	r8, r8, $0x10
-	str	r8, [r6]
-
-	/* Power up the PLL */
-	ldr	r7, PLL_PWRUP_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Enable the PLL from Disable Mode */
-	ldr	r7, PLL_DISABLE_ENABLE_MASK
-	and	r8, r8, r7
-	str	r8, [r6]
-
-	/* Program the PLL Multiplier */
-	ldr	r6, PLL1_PLLM
-	mov	r3, $0x15	/* For 594MHz */
-	str	r3, [r6]
-
-	/* Wait for PLL to Reset Properly */
-	mov	r10, $0xff
-
-ResetLoop:
-	subs	r10, r10, $1
-	bne	ResetLoop
-
-	/* Bring PLL out of Reset */
-	ldr	r6, PLL1_CTL
-	orr	r8, r8, $0x08
-	str	r8, [r6]
-
-	/* Wait for PLL to Lock */
-	ldr	r10, PLL_LOCK_COUNT
-
-PLL1Lock:
-	subs	r10, r10, $1
-	bne	PLL1Lock
-
-	/* Enable the PLL */
-	orr	r8, r8, $0x01
-	str	r8, [r6]
-
-	nop
-	nop
-	nop
-	nop
-
-	/*------------------------------------------------------*
-	 * AEMIF configuration for NOR Flash (double check)     *
-	 *------------------------------------------------------*/
-	ldr	r0, _PINMUX0
-	ldr	r1, _DEV_SETTING
-	str	r1, [r0]
-
-	ldr	r0, WAITCFG
-	ldr	r1, WAITCFG_VAL
-	ldr	r2, [r0]
-	orr	r2, r2, r1
-	str	r2, [r0]
-
-	ldr	r0, ACFG3
-	ldr	r1, ACFG3_VAL
-	ldr	r2, [r0]
-	and	r1, r2, r1
-	str	r1, [r0]
-
-	ldr	r0, ACFG4
-	ldr	r1, ACFG4_VAL
-	ldr	r2, [r0]
-	and	r1, r2, r1
-	str	r1, [r0]
-
-	ldr	r0, ACFG5
-	ldr	r1, ACFG5_VAL
-	ldr	r2, [r0]
-	and	r1, r2, r1
-	str	r1, [r0]
-
-	/*--------------------------------------*
-	 * VTP manual Calibration               *
-	 *--------------------------------------*/
-	ldr	r0, VTPIOCR
-	ldr	r1, VTP_MMR0
-	str	r1, [r0]
-
-	ldr	r0, VTPIOCR
-	ldr	r1, VTP_MMR1
-	str	r1, [r0]
-
-	/* Wait for 33 VTP CLK cycles.  VRP operates at 27 MHz */
-	ldr	r10, VTP_LOCK_COUNT
-VTPLock:
-	subs	r10, r10, $1
-	bne	VTPLock
-
-	ldr	r6, DFT_ENABLE
-	mov	r10, $0x01
-	str	r10, [r6]
-
-	ldr	r6, DDRVTPR
-	ldr	r7, [r6]
-	mov	r8, r7, LSL #32-10
-	mov	r8, r8, LSR #32-10        /* grab low 10 bits  */
-	ldr	r7, VTP_RECAL
-	orr	r8, r7, r8
-	ldr	r7, VTP_EN
-	orr	r8, r7, r8
-	str	r8, [r0]
-
-
-	/* Wait for 33 VTP CLK cycles.  VRP operates at 27 MHz */
-	ldr	r10, VTP_LOCK_COUNT
-VTP1Lock:
-	subs	r10, r10, $1
-	bne	VTP1Lock
-
-	ldr	r1, [r0]
-	ldr	r2, VTP_MASK
-	and	r2, r1, r2
-	str	r2, [r0]
-
-	ldr	r6, DFT_ENABLE
-	mov	r10, $0
-	str	r10, [r6]
-
-	/*
-	 * Call board-specific lowlevel init.
-	 * That MUST be present and THAT returns
-	 * back to arch calling code with "mov pc, lr."
-	 */
-	b	dv_board_init
-
-.ltorg
-
-_PINMUX0:
-	.word	0x01c40000		/* Device Configuration Registers */
-_PINMUX1:
-	.word	0x01c40004		/* Device Configuration Registers */
-
-_DEV_SETTING:
-	.word	0x00000c1f
-
-WAITCFG:
-	.word	0x01e00004
-WAITCFG_VAL:
-	.word	0
-ACFG3:
-	.word	0x01e00014
-ACFG3_VAL:
-	.word	0x3ffffffd
-ACFG4:
-	.word	0x01e00018
-ACFG4_VAL:
-	.word	0x3ffffffd
-ACFG5:
-	.word	0x01e0001c
-ACFG5_VAL:
-	.word	0x3ffffffd
-
-MDCTL_DDR2:
-	.word	0x01c41a34
-MDSTAT_DDR2:
-	.word	0x01c41834
-
-PTCMD:
-	.word	0x01c41120
-PTSTAT:
-	.word	0x01c41128
-
-EINT_ENABLE0:
-	.word	0x01c48018
-EINT_ENABLE1:
-	.word	0x01c4801c
-
-PSC_FLAG_CLEAR:
-	.word	0xffffffe0
-PSC_GEM_FLAG_CLEAR:
-	.word	0xfffffeff
-
-/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
-DDRCTL:
-	.word	0x200000e4
-DDRCTL_VAL:
-	.word	0x50006405
-SDREF:
-	.word	0x2000000c
-SDREF_VAL:
-	.word	0x000005c3
-SDCFG:
-	.word	0x20000008
-SDCFG_VAL:
-#ifdef	DDR_4BANKS
-	.word	0x00178622
-#elif defined DDR_8BANKS
-	.word	0x00178632
-#else
-#error "Unknown DDR configuration!!!"
-#endif
-SDTIM0:
-	.word	0x20000010
-SDTIM0_VAL_162MHz:
-	.word	0x28923211
-SDTIM1:
-	.word	0x20000014
-SDTIM1_VAL_162MHz:
-	.word	0x0016c722
-VTPIOCR:
-	.word	0x200000f0	/* VTP IO Control register */
-DDRVTPR:
-	.word	0x01c42030	/* DDR VPTR MMR */
-VTP_MMR0:
-	.word	0x201f
-VTP_MMR1:
-	.word	0xa01f
-DFT_ENABLE:
-	.word	0x01c4004c
-VTP_LOCK_COUNT:
-	.word	0x5b0
-VTP_MASK:
-	.word	0xffffdfff
-VTP_RECAL:
-	.word	0x08000
-VTP_EN:
-	.word	0x02000
-CFGTEST:
-	.word	0x80010000
-MASK_VAL:
-	.word	0x00000fff
-
-/* GEM Power Up & LPSC Control Register */
-MDCTL_GEM:
-	.word	0x01c41a9c
-MDSTAT_GEM:
-	.word	0x01c4189c
-
-/* For WDT reset chip bug */
-P1394:
-	.word	0x01c41a20
-
-PLL_CLKSRC_MASK:
-	.word	0xfffffeff	/* Mask the Clock Mode bit */
-PLL_ENSRC_MASK:
-	.word	0xffffffdf	/* Select the PLLEN source */
-PLL_BYPASS_MASK:
-	.word	0xfffffffe	/* Put the PLL in BYPASS */
-PLL_RESET_MASK:
-	.word	0xfffffff7	/* Put the PLL in Reset Mode */
-PLL_PWRUP_MASK:
-	.word	0xfffffffd	/* PLL Power up Mask Bit  */
-PLL_DISABLE_ENABLE_MASK:
-	.word	0xffffffef	/* Enable the PLL from Disable */
-PLL_LOCK_COUNT:
-	.word	0x2000
-
-/* PLL1-SYSTEM PLL MMRs */
-PLL1_CTL:
-	.word	0x01c40900
-PLL1_PLLM:
-	.word	0x01c40910
-
-/* PLL2-SYSTEM PLL MMRs */
-PLL2_CTL:
-	.word	0x01c40d00
-PLL2_PLLM:
-	.word	0x01c40d10
-PLL2_DIV1:
-	.word	0x01c40d18
-PLL2_DIV2:
-	.word	0x01c40d1c
-PLL2_PLLCMD:
-	.word	0x01c40d38
-PLL2_PLLSTAT:
-	.word	0x01c40d3c
-PLL2_DIV_MASK:
-	.word	0xffff7fff
-
-MMARG_BRF0:
-	.word	0x01c42010	/* BRF margin mode 0 (R/W)*/
-MMARG_BRF0_VAL:
-	.word	0x00444400
-
-DDR2_START_ADDR:
-	.word	0x80000000
-DUMMY_VAL:
-	.word	0xa55aa55a
-#else /* CONFIG_SOC_DM644X */
-	mov pc, lr
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/lxt972.c b/arch/arm/cpu/arm926ejs/davinci/lxt972.c
deleted file mode 100644
index c482fd9378..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/lxt972.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * Intel LXT971/LXT972 PHY Driver for TI DaVinci
- * (TMS320DM644x) based boards.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * --------------------------------------------------------
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-#include <asm/arch/emac_defs.h>
-#include "../../../../../drivers/net/davinci_emac.h"
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-#ifdef CONFIG_CMD_NET
-
-int lxt972_is_phy_connected(int phy_addr)
-{
-	u_int16_t id1, id2;
-
-	if (!davinci_eth_phy_read(phy_addr, MII_PHYSID1, &id1))
-		return(0);
-	if (!davinci_eth_phy_read(phy_addr, MII_PHYSID2, &id2))
-		return(0);
-
-	if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
-		return(1);
-
-	return(0);
-}
-
-int lxt972_get_link_speed(int phy_addr)
-{
-	u_int16_t stat1, tmp;
-	volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
-
-	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
-		return(0);
-
-	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link up? */
-		return(0);
-
-	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
-		return(0);
-
-	tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
-
-	davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
-	/* Read back */
-	if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
-		return(0);
-
-	/* Speed doesn't matter, there is no setting for it in EMAC... */
-	if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-		/* set DM644x EMAC for Full Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE |
-			EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
-	} else {
-		/*set DM644x EMAC for Half Duplex  */
-		emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
-	}
-
-	return(1);
-}
-
-
-int lxt972_init_phy(int phy_addr)
-{
-	int ret = 1;
-
-	if (!lxt972_get_link_speed(phy_addr)) {
-		/* Try another time */
-		ret = lxt972_get_link_speed(phy_addr);
-	}
-
-	/* Disable PHY Interrupts */
-	davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
-
-	return(ret);
-}
-
-
-int lxt972_auto_negotiate(int phy_addr)
-{
-	u_int16_t tmp;
-
-	if (!davinci_eth_phy_read(phy_addr, MII_BMCR, &tmp))
-		return(0);
-
-	/* Restart Auto_negotiation  */
-	tmp |= BMCR_ANRESTART;
-	davinci_eth_phy_write(phy_addr, MII_BMCR, tmp);
-
-	/*check AutoNegotiate complete */
-	udelay (10000);
-	if (!davinci_eth_phy_read(phy_addr, MII_BMSR, &tmp))
-		return(0);
-
-	if (!(tmp & BMSR_ANEGCOMPLETE))
-		return(0);
-
-	return (lxt972_get_link_speed(phy_addr));
-}
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/cpu/arm926ejs/davinci/misc.c
deleted file mode 100644
index e18bdfc729..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/misc.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Miscelaneous DaVinci functions.
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <i2c.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_BUILD
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = get_ram_size(
-			(void *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_MAX_RAM_BANK_SIZE);
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
-	gd->bd->bi_dram[0].size = gd->ram_size;
-}
-#endif
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- * Read ethernet MAC address from EEPROM for DVEVM compatible boards.
- * Returns 1 if found, 0 otherwise.
- */
-int dvevm_read_mac_address(uint8_t *buf)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
-	/* Read MAC address. */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x7F00,
-		CONFIG_SYS_I2C_EEPROM_ADDR_LEN, (uint8_t *) &buf[0], 6))
-		goto i2cerr;
-
-	/* Check that MAC address is valid. */
-	if (!is_valid_ether_addr(buf))
-		goto err;
-
-	return 1; /* Found */
-
-i2cerr:
-	printf("Read from EEPROM @ 0x%02x failed\n",
-		CONFIG_SYS_I2C_EEPROM_ADDR);
-err:
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR */
-
-	return 0;
-}
-
-/*
- * Set the mii mode as MII or RMII
- */
-#if defined(CONFIG_SOC_DA8XX)
-void davinci_emac_mii_mode_sel(int mode_sel)
-{
-	int val;
-
-	val = readl(&davinci_syscfg_regs->cfgchip3);
-	if (mode_sel == 0)
-		val &= ~(1 << 8);
-	else
-		val |= (1 << 8);
-	writel(val, &davinci_syscfg_regs->cfgchip3);
-}
-#endif
-/*
- * If there is no MAC address in the environment, then it will be initialized
- * (silently) from the value in the EEPROM.
- */
-void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
-{
-	uint8_t env_enetaddr[6];
-	int ret;
-
-	ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
-	if (!ret) {
-		/*
-		 * There is no MAC address in the environment, so we
-		 * initialize it from the value in the EEPROM.
-		 */
-		debug("### Setting environment from EEPROM MAC address = "
-			"\"%pM\"\n",
-			env_enetaddr);
-		ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr);
-	}
-	if (!ret)
-		printf("Failed to set mac address from EEPROM: %d\n", ret);
-}
-#endif	/* CONFIG_DRIVER_TI_EMAC */
-
-#if defined(CONFIG_SOC_DA8XX)
-#ifndef CONFIG_USE_IRQ
-void irq_init(void)
-{
-	/*
-	 * Mask all IRQs by clearing the global enable and setting
-	 * the enable clear for all the 90 interrupts.
-	 */
-	writel(0, &davinci_aintc_regs->ger);
-
-	writel(0, &davinci_aintc_regs->hier);
-
-	writel(0xffffffff, &davinci_aintc_regs->ecr1);
-	writel(0xffffffff, &davinci_aintc_regs->ecr2);
-	writel(0xffffffff, &davinci_aintc_regs->ecr3);
-}
-#endif
-
-/*
- * Enable PSC for various peripherals.
- */
-int da8xx_configure_lpsc_items(const struct lpsc_resource *item,
-				    const int n_items)
-{
-	int i;
-
-	for (i = 0; i < n_items; i++)
-		lpsc_on(item[i].lpsc_no);
-
-	return 0;
-}
-#endif
diff --git a/arch/arm/cpu/arm926ejs/davinci/pinmux.c b/arch/arm/cpu/arm926ejs/davinci/pinmux.c
deleted file mode 100644
index e9d8c87cc8..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/pinmux.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * DaVinci pinmux functions.
- *
- * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/davinci_misc.h>
-
-/*
- * Change the setting of a pin multiplexer field.
- *
- * Takes an array of pinmux settings similar to:
- *
- * struct pinmux_config uart_pins[] = {
- *	{ &davinci_syscfg_regs->pinmux[8], 2, 7 },
- *	{ &davinci_syscfg_regs->pinmux[9], 2, 0 }
- * };
- *
- * Stepping through the array, each pinmux[n] register has the given value
- * set in the pin mux field specified.
- *
- * The number of pins in the array must be passed (ARRAY_SIZE can provide
- * this value conveniently).
- *
- * Returns 0 if all field numbers and values are in the correct range,
- * else returns -1.
- */
-int davinci_configure_pin_mux(const struct pinmux_config *pins,
-			      const int n_pins)
-{
-	int i;
-
-	/* check for invalid pinmux values */
-	for (i = 0; i < n_pins; i++) {
-		if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
-		    (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
-			return -1;
-	}
-
-	/* configure the pinmuxes */
-	for (i = 0; i < n_pins; i++) {
-		const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
-		const unsigned int value = pins[i].value << offset;
-		const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
-		const dv_reg *mux = pins[i].mux;
-
-		writel(value | (readl(mux) & (~mask)), mux);
-	}
-
-	return 0;
-}
-
-/*
- * Configure multiple pinmux resources.
- *
- * Takes an pinmux_resource array of pinmux_config and pin counts:
- *
- * const struct pinmux_resource pinmuxes[] = {
- *	PINMUX_ITEM(uart_pins),
- *	PINMUX_ITEM(i2c_pins),
- * };
- *
- * The number of items in the array must be passed (ARRAY_SIZE can provide
- * this value conveniently).
- *
- * Each item entry is configured in the defined order. If configuration
- * of any item fails, -1 is returned and none of the following items are
- * configured. On success, 0 is returned.
- */
-int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
-				    const int n_items)
-{
-	int i;
-
-	for (i = 0; i < n_items; i++) {
-		if (davinci_configure_pin_mux(item[i].pins,
-					      item[i].n_pins) != 0)
-			return -1;
-	}
-
-	return 0;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/psc.c b/arch/arm/cpu/arm926ejs/davinci/psc.c
deleted file mode 100644
index 8d99e2e997..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/psc.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Power and Sleep Controller (PSC) functions.
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
- * Copyright (C) 2004 Texas Instruments.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/io.h>
-
-/*
- * The PSC manages three inputs to a "module" which may be a peripheral or
- * CPU.  Those inputs are the module's:  clock; reset signal; and sometimes
- * its power domain.  For our purposes, we only care whether clock and power
- * are active, and the module is out of reset.
- *
- * DaVinci chips may include two separate power domains: "Always On" and "DSP".
- * Chips without a DSP generally have only one domain.
- *
- * The "Always On" power domain is always on when the chip is on, and is
- * powered by the VDD pins (on DM644X). The majority of DaVinci modules
- * lie within the "Always On" power domain.
- *
- * A separate domain called the "DSP" domain houses the C64x+ and other video
- * hardware such as VICP. In some chips, the "DSP" domain is not always on.
- * The "DSP" power domain is powered by the CVDDDSP pins (on DM644X).
- */
-
-/* Works on Always On power domain only (no PD argument) */
-static void lpsc_transition(unsigned int id, unsigned int state)
-{
-	dv_reg_p mdstat, mdctl, ptstat, ptcmd;
-#ifdef CONFIG_SOC_DA8XX
-	struct davinci_psc_regs *psc_regs;
-#endif
-
-#ifndef CONFIG_SOC_DA8XX
-	if (id >= DAVINCI_LPSC_GEM)
-		return;			/* Don't work on DSP Power Domain */
-
-	mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
-	mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
-	ptstat = REG_P(PSC_PTSTAT);
-	ptcmd = REG_P(PSC_PTCMD);
-#else
-	if (id < DAVINCI_LPSC_PSC1_BASE) {
-		if (id >= PSC_PSC0_MODULE_ID_CNT)
-			return;
-		psc_regs = davinci_psc0_regs;
-		mdstat = &psc_regs->psc0.mdstat[id];
-		mdctl = &psc_regs->psc0.mdctl[id];
-	} else {
-		id -= DAVINCI_LPSC_PSC1_BASE;
-		if (id >= PSC_PSC1_MODULE_ID_CNT)
-			return;
-		psc_regs = davinci_psc1_regs;
-		mdstat = &psc_regs->psc1.mdstat[id];
-		mdctl = &psc_regs->psc1.mdctl[id];
-	}
-	ptstat = &psc_regs->ptstat;
-	ptcmd = &psc_regs->ptcmd;
-#endif
-
-	while (readl(ptstat) & 0x01)
-		continue;
-
-	if ((readl(mdstat) & PSC_MDSTAT_STATE) == state)
-		return; /* Already in that state */
-
-	writel((readl(mdctl) & ~PSC_MDCTL_NEXT) | state, mdctl);
-
-	switch (id) {
-#ifdef CONFIG_SOC_DM644X
-	/* Special treatment for some modules as for sprue14 p.7.4.2 */
-	case DAVINCI_LPSC_VPSSSLV:
-	case DAVINCI_LPSC_EMAC:
-	case DAVINCI_LPSC_EMAC_WRAPPER:
-	case DAVINCI_LPSC_MDIO:
-	case DAVINCI_LPSC_USB:
-	case DAVINCI_LPSC_ATA:
-	case DAVINCI_LPSC_VLYNQ:
-	case DAVINCI_LPSC_UHPI:
-	case DAVINCI_LPSC_DDR_EMIF:
-	case DAVINCI_LPSC_AEMIF:
-	case DAVINCI_LPSC_MMC_SD:
-	case DAVINCI_LPSC_MEMSTICK:
-	case DAVINCI_LPSC_McBSP:
-	case DAVINCI_LPSC_GPIO:
-		writel(readl(mdctl) | 0x200, mdctl);
-		break;
-#endif
-	}
-
-	writel(0x01, ptcmd);
-
-	while (readl(ptstat) & 0x01)
-		continue;
-	while ((readl(mdstat) & PSC_MDSTAT_STATE) != state)
-		continue;
-}
-
-void lpsc_on(unsigned int id)
-{
-	lpsc_transition(id, 0x03);
-}
-
-void lpsc_syncreset(unsigned int id)
-{
-	lpsc_transition(id, 0x01);
-}
-
-void lpsc_disable(unsigned int id)
-{
-	lpsc_transition(id, 0x0);
-}
-
-/* Not all DaVinci chips have a DSP power domain. */
-#ifdef CONFIG_SOC_DM644X
-
-/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */
-#if !defined(CONFIG_SYS_USE_DSPLINK)
-void dsp_on(void)
-{
-	int i;
-
-	if (REG(PSC_PDSTAT1) & 0x1f)
-		return;			/* Already on */
-
-	REG(PSC_GBLCTL) |= 0x01;
-	REG(PSC_PDCTL1) |= 0x01;
-	REG(PSC_PDCTL1) &= ~0x100;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
-	REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
-	REG(PSC_PTCMD) = 0x02;
-
-	for (i = 0; i < 100; i++) {
-		if (REG(PSC_EPCPR) & 0x02)
-			break;
-	}
-
-	REG(PSC_CHP_SHRTSW) = 0x01;
-	REG(PSC_PDCTL1) |= 0x100;
-	REG(PSC_EPCCR) = 0x02;
-
-	for (i = 0; i < 100; i++) {
-		if (!(REG(PSC_PTSTAT) & 0x02))
-			break;
-	}
-
-	REG(PSC_GBLCTL) &= ~0x1f;
-}
-#endif /* CONFIG_SYS_USE_DSPLINK */
-
-#endif /* have a DSP */
diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c
deleted file mode 100644
index 6b0f15428a..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/reset.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  Processor reset using WDT.
- *
- * Copyright (C) 2012 Dmitry Bondar <bond@inmys.ru>
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/timer_defs.h>
-#include <asm/arch/hardware.h>
-
-void reset_cpu(unsigned long a)
-{
-	struct davinci_timer *const wdttimer =
-		(struct davinci_timer *)DAVINCI_WDOG_BASE;
-	writel(0x08, &wdttimer->tgcr);
-	writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr);
-	writel(0, &wdttimer->tim12);
-	writel(0, &wdttimer->tim34);
-	writel(0, &wdttimer->prd12);
-	writel(0, &wdttimer->prd34);
-	writel(readl(&wdttimer->tcr) | 0x40, &wdttimer->tcr);
-	writel(readl(&wdttimer->wdtcr) | 0x4000, &wdttimer->wdtcr);
-	writel(0xa5c64000, &wdttimer->wdtcr);
-	writel(0xda7e4000, &wdttimer->wdtcr);
-	writel(0x4000, &wdttimer->wdtcr);
-	while (1)
-		/*nothing*/;
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c
deleted file mode 100644
index 49349da179..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/spl.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <spl.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <asm/arch/dm365_lowlevel.h>
-#include <ns16550.h>
-#include <malloc.h>
-#include <spi_flash.h>
-#include <mmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_LIBCOMMON_SUPPORT
-void puts(const char *str)
-{
-	while (*str)
-		putc(*str++);
-}
-
-void putc(char c)
-{
-	if (c == '\n')
-		NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), '\r');
-
-	NS16550_putc((NS16550_t)(CONFIG_SYS_NS16550_COM1), c);
-}
-#endif /* CONFIG_SPL_LIBCOMMON_SUPPORT */
-
-void spl_board_init(void)
-{
-#ifdef CONFIG_SOC_DM365
-	dm36x_lowlevel_init(0);
-#endif
-#ifdef CONFIG_SOC_DA8XX
-	arch_cpu_init();
-#endif
-	preloader_console_init();
-}
-
-u32 spl_boot_mode(void)
-{
-	return MMCSD_MODE_RAW;
-}
-
-u32 spl_boot_device(void)
-{
-#ifdef CONFIG_SPL_NAND_SIMPLE
-	return BOOT_DEVICE_NAND;
-#elif defined(CONFIG_SPL_SPI_LOAD)
-	return BOOT_DEVICE_SPI;
-#elif defined(CONFIG_SPL_MMC_LOAD)
-	return BOOT_DEVICE_MMC1;
-#else
-	puts("Unknown boot device\n");
-	hang();
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
deleted file mode 100644
index c7d0652e83..0000000000
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/timer_defs.h>
-#include <div64.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct davinci_timer * const timer =
-	(struct davinci_timer *)CONFIG_SYS_TIMERBASE;
-
-#define TIMER_LOAD_VAL	0xffffffff
-
-#define TIM_CLK_DIV	16
-
-int timer_init(void)
-{
-	/* We are using timer34 in unchained 32-bit mode, full speed */
-	writel(0x0, &timer->tcr);
-	writel(0x0, &timer->tgcr);
-	writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
-	writel(0x0, &timer->tim34);
-	writel(TIMER_LOAD_VAL, &timer->prd34);
-	writel(2 << 22, &timer->tcr);
-	gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV;
-	gd->arch.timer_reset_value = 0;
-
-	return(0);
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
-	unsigned long now = readl(&timer->tim34);
-
-	/* increment tbu if tbl has rolled over */
-	if (now < gd->arch.tbl)
-		gd->arch.tbu++;
-	gd->arch.tbl = now;
-
-	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-ulong get_timer(ulong base)
-{
-	unsigned long long timer_diff;
-
-	timer_diff = get_ticks() - gd->arch.timer_reset_value;
-
-	return lldiv(timer_diff,
-		     (gd->arch.timer_rate_hz / CONFIG_SYS_HZ)) - base;
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long endtime;
-
-	endtime = lldiv((unsigned long long)usec * gd->arch.timer_rate_hz,
-			1000000UL);
-	endtime += get_ticks();
-
-	while (get_ticks() < endtime)
-		;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return gd->arch.timer_rate_hz;
-}
-
-#ifdef CONFIG_HW_WATCHDOG
-static struct davinci_timer * const wdttimer =
-	(struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE;
-
-/*
- * See prufw2.pdf for using Timer as a WDT
- */
-void davinci_hw_watchdog_enable(void)
-{
-	writel(0x0, &wdttimer->tcr);
-	writel(0x0, &wdttimer->tgcr);
-	/* TIMMODE = 2h */
-	writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr);
-	writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12);
-	writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34);
-	writel(2 << 22, &wdttimer->tcr);
-	writel(0x0, &wdttimer->tim12);
-	writel(0x0, &wdttimer->tim34);
-	/* set WDEN bit, WDKEY 0xa5c6 */
-	writel(0xa5c64000, &wdttimer->wdtcr);
-	/* clear counter register */
-	writel(0xda7e4000, &wdttimer->wdtcr);
-}
-
-void davinci_hw_watchdog_reset(void)
-{
-	writel(0xa5c64000, &wdttimer->wdtcr);
-	writel(0xda7e4000, &wdttimer->wdtcr);
-}
-#endif