SPL: ARM: spear: Add SPL support for SPEAr600 platform

This patch adds SPL support for SPEAr600. Currently only SNOR
(Serial NOR) flash support is included. Other boot devices
(NAND, MMC, USB ...) may be added with later patches.

Tested on the STM SPEAr600 evaluation and x600 SPEAr600 boards.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Amit Virdi <amit.virdi@st.com>
Cc: Vipin Kumar <vipin.kumar@st.com>

1 files changed, 122 insertions, 0 deletions

diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S
new file mode 100644
index 0000000000..a103c0f4ab
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/spear/start.S
@@ -0,0 +1,122 @@
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <config.h>
+
+.globl _start
+_start:
+	b	reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:
+_software_interrupt:
+_prefetch_abort:
+_data_abort:
+_not_used:
+_irq:
+_fiq:
+	.word infinite_loop
+
+infinite_loop:
+	b	infinite_loop
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * Below are the critical initializations already taken place in BootROM.
+ * So, these are not taken care in Xloader
+ * 1. Relocation to RAM
+ * 2. Initializing stacks
+ *
+ *************************************************************************
+ */
+
+/*
+ * the actual reset code
+ */
+
+reset:
+/*
+ * Xloader has to return back to BootROM in a few cases.
+ * eg. Ethernet boot, UART boot, USB boot
+ * Saving registers for returning back
+ */
+	stmdb	sp!, {r0-r12,r14}
+	bl	cpu_init_crit
+/*
+ * Clearing bss area is not done in Xloader.
+ * BSS area lies in the DDR location which is not yet initialized
+ * bss is assumed to be uninitialized.
+ */
+	bl	spl_boot
+	ldmia	sp!, {r0-r12,pc}
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * enable instruction cache
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	stmdb	sp!, {lr}
+	bl	lowlevel_init	/* go setup pll,mux,memory */
+	ldmia	sp!, {pc}