ARM: tegra: collect SoC sources into mach-tegra

This commit moves files as follows:

 arch/arm/cpu/arm720t/tegra20/*      -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/arm720t/tegra30/*      -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/arm720t/tegra114/*     -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/arm720t/tegra124*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/arm720t/tegra-common/* -> arch/arm/mach-tegra/*
 arch/arm/cpu/armv7/tegra20/*        -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/armv7/tegra30/*        -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/armv7/tegra114/*       -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/armv7/tegra124/*       -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/armv7/tegra-common/*   -> arch/arm/mach-tegra/*
 arch/arm/cpu/tegra20-common/*       -> arch/arm/mach-tegra/tegra20/*
 arch/arm/cpu/tegra30-common/*       -> arch/arm/mach-tegra/tegra30/*
 arch/arm/cpu/tegra114-common/*      -> arch/arm/mach-tegra/tegra114/*
 arch/arm/cpu/tegra124-common/*      -> arch/arm/mach-tegra/tegra124/*
 arch/arm/cpu/tegra-common/*         -> arch/arm/mach-tegra/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Tested-by: Simon Glass <sjg@chromium.org> [ on nyan-big ]
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Tom Warren <twarren@nvidia.com>

13 files changed, 0 insertions, 1411 deletions

diff --git a/arch/arm/cpu/arm720t/Makefile b/arch/arm/cpu/arm720t/Makefile
index 9f61ea2516..243a123378 100644
--- a/arch/arm/cpu/arm720t/Makefile
+++ b/arch/arm/cpu/arm720t/Makefile
@@ -7,9 +7,3 @@
 
 extra-y	= start.o
 obj-y	= interrupts.o cpu.o
-
-obj-$(CONFIG_TEGRA) += tegra-common/
-obj-$(CONFIG_TEGRA20) += tegra20/
-obj-$(CONFIG_TEGRA30) += tegra30/
-obj-$(CONFIG_TEGRA114) += tegra114/
-obj-$(CONFIG_TEGRA124) += tegra124/
diff --git a/arch/arm/cpu/arm720t/tegra-common/Makefile b/arch/arm/cpu/arm720t/tegra-common/Makefile
deleted file mode 100644
index a9c2b675ae..0000000000
--- a/arch/arm/cpu/arm720t/tegra-common/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-$(CONFIG_SPL_BUILD) += spl.o
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c
deleted file mode 100644
index c6f3b029a1..0000000000
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include "cpu.h"
-
-int get_num_cpus(void)
-{
-	struct apb_misc_gp_ctlr *gp;
-	uint rev;
-
-	gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
-	rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
-
-	switch (rev) {
-	case CHIPID_TEGRA20:
-		return 2;
-		break;
-	case CHIPID_TEGRA30:
-	case CHIPID_TEGRA114:
-	default:
-		return 4;
-		break;
-	}
-}
-
-/*
- * Timing tables for each SOC for all four oscillator options.
- */
-struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
-	/*
-	 * T20: 1 GHz
-	 *
-	 * Register   Field  Bits   Width
-	 * ------------------------------
-	 * PLLX_BASE  p      22:20    3
-	 * PLLX_BASE  n      17: 8   10
-	 * PLLX_BASE  m       4: 0    5
-	 * PLLX_MISC  cpcon  11: 8    4
-	 */
-	{
-		{ .n = 1000, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
-		{ .n =  625, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
-		{ .n = 1000, .m = 12, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
-		{ .n = 1000, .m = 26, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
-	},
-	/*
-	 * T25: 1.2 GHz
-	 *
-	 * Register   Field  Bits   Width
-	 * ------------------------------
-	 * PLLX_BASE  p      22:20    3
-	 * PLLX_BASE  n      17: 8   10
-	 * PLLX_BASE  m       4: 0    5
-	 * PLLX_MISC  cpcon  11: 8    4
-	 */
-	{
-		{ .n = 923, .m = 10, .p = 0, .cpcon = 12 }, /* OSC: 13.0 MHz */
-		{ .n = 750, .m = 12, .p = 0, .cpcon =  8 }, /* OSC: 19.2 MHz */
-		{ .n = 600, .m =  6, .p = 0, .cpcon = 12 }, /* OSC: 12.0 MHz */
-		{ .n = 600, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
-	},
-	/*
-	 * T30: 600 MHz
-	 *
-	 * Register   Field  Bits   Width
-	 * ------------------------------
-	 * PLLX_BASE  p      22:20    3
-	 * PLLX_BASE  n      17: 8   10
-	 * PLLX_BASE  m       4: 0    5
-	 * PLLX_MISC  cpcon  11: 8    4
-	 */
-	{
-		{ .n = 600, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
-		{ .n = 500, .m = 16, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
-		{ .n = 600, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
-		{ .n = 600, .m = 26, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
-	},
-	/*
-	 * T114: 700 MHz
-	 *
-	 * Register   Field  Bits   Width
-	 * ------------------------------
-	 * PLLX_BASE  p      23:20    4
-	 * PLLX_BASE  n      15: 8    8
-	 * PLLX_BASE  m       7: 0    8
-	 */
-	{
-		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
-		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
-		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
-		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
-	},
-
-	/*
-	 * T124: 700 MHz
-	 *
-	 * Register   Field  Bits   Width
-	 * ------------------------------
-	 * PLLX_BASE  p      23:20    4
-	 * PLLX_BASE  n      15: 8    8
-	 * PLLX_BASE  m       7: 0    8
-	 */
-	{
-		{ .n = 108, .m = 1, .p = 1 }, /* OSC: 13.0 MHz */
-		{ .n =  73, .m = 1, .p = 1 }, /* OSC: 19.2 MHz */
-		{ .n = 116, .m = 1, .p = 1 }, /* OSC: 12.0 MHz */
-		{ .n = 108, .m = 2, .p = 1 }, /* OSC: 26.0 MHz */
-	},
-};
-
-static inline void pllx_set_iddq(void)
-{
-#if defined(CONFIG_TEGRA124)
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	/* Disable IDDQ */
-	reg = readl(&clkrst->crc_pllx_misc3);
-	reg &= ~PLLX_IDDQ_MASK;
-	writel(reg, &clkrst->crc_pllx_misc3);
-	udelay(2);
-	debug("%s: IDDQ: PLLX IDDQ = 0x%08X\n", __func__,
-	      readl(&clkrst->crc_pllx_misc3));
-#endif
-}
-
-int pllx_set_rate(struct clk_pll_simple *pll , u32 divn, u32 divm,
-		u32 divp, u32 cpcon)
-{
-	int chip = tegra_get_chip();
-	u32 reg;
-
-	/* If PLLX is already enabled, just return */
-	if (readl(&pll->pll_base) & PLL_ENABLE_MASK) {
-		debug("pllx_set_rate: PLLX already enabled, returning\n");
-		return 0;
-	}
-
-	debug(" pllx_set_rate entry\n");
-
-	pllx_set_iddq();
-
-	/* Set BYPASS, m, n and p to PLLX_BASE */
-	reg = PLL_BYPASS_MASK | (divm << PLL_DIVM_SHIFT);
-	reg |= ((divn << PLL_DIVN_SHIFT) | (divp << PLL_DIVP_SHIFT));
-	writel(reg, &pll->pll_base);
-
-	/* Set cpcon to PLLX_MISC */
-	if (chip == CHIPID_TEGRA20 || chip == CHIPID_TEGRA30)
-		reg = (cpcon << PLL_CPCON_SHIFT);
-	else
-		reg = 0;
-
-	/* Set dccon to PLLX_MISC if freq > 600MHz */
-	if (divn > 600)
-		reg |= (1 << PLL_DCCON_SHIFT);
-	writel(reg, &pll->pll_misc);
-
-	/* Disable BYPASS */
-	reg = readl(&pll->pll_base);
-	reg &= ~PLL_BYPASS_MASK;
-	writel(reg, &pll->pll_base);
-	debug("pllx_set_rate: base = 0x%08X\n", reg);
-
-	/* Set lock_enable to PLLX_MISC */
-	reg = readl(&pll->pll_misc);
-	reg |= PLL_LOCK_ENABLE_MASK;
-	writel(reg, &pll->pll_misc);
-	debug("pllx_set_rate: misc = 0x%08X\n", reg);
-
-	/* Enable PLLX last, once it's all configured */
-	reg = readl(&pll->pll_base);
-	reg |= PLL_ENABLE_MASK;
-	writel(reg, &pll->pll_base);
-	debug("pllx_set_rate: base final = 0x%08X\n", reg);
-
-	return 0;
-}
-
-void init_pllx(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	struct clk_pll_simple *pll = &clkrst->crc_pll_simple[SIMPLE_PLLX];
-	int soc_type, sku_info, chip_sku;
-	enum clock_osc_freq osc;
-	struct clk_pll_table *sel;
-
-	debug("init_pllx entry\n");
-
-	/* get SOC (chip) type */
-	soc_type = tegra_get_chip();
-	debug(" init_pllx: SoC = 0x%02X\n", soc_type);
-
-	/* get SKU info */
-	sku_info = tegra_get_sku_info();
-	debug(" init_pllx: SKU info byte = 0x%02X\n", sku_info);
-
-	/* get chip SKU, combo of the above info */
-	chip_sku = tegra_get_chip_sku();
-	debug(" init_pllx: Chip SKU = %d\n", chip_sku);
-
-	/* get osc freq */
-	osc = clock_get_osc_freq();
-	debug(" init_pllx: osc = %d\n", osc);
-
-	/* set pllx */
-	sel = &tegra_pll_x_table[chip_sku][osc];
-	pllx_set_rate(pll, sel->n, sel->m, sel->p, sel->cpcon);
-}
-
-void enable_cpu_clock(int enable)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 clk;
-
-	/*
-	 * NOTE:
-	 * Regardless of whether the request is to enable or disable the CPU
-	 * clock, every processor in the CPU complex except the master (CPU 0)
-	 * will have it's clock stopped because the AVP only talks to the
-	 * master.
-	 */
-
-	if (enable) {
-		/* Initialize PLLX */
-		init_pllx();
-
-		/* Wait until all clocks are stable */
-		udelay(PLL_STABILIZATION_DELAY);
-
-		writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
-		writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
-	}
-
-	/*
-	 * Read the register containing the individual CPU clock enables and
-	 * always stop the clocks to CPUs > 0.
-	 */
-	clk = readl(&clkrst->crc_clk_cpu_cmplx);
-	clk |= 1 << CPU1_CLK_STP_SHIFT;
-	if (get_num_cpus() == 4)
-		clk |= (1 << CPU2_CLK_STP_SHIFT) + (1 << CPU3_CLK_STP_SHIFT);
-
-	/* Stop/Unstop the CPU clock */
-	clk &= ~CPU0_CLK_STP_MASK;
-	clk |= !enable << CPU0_CLK_STP_SHIFT;
-	writel(clk, &clkrst->crc_clk_cpu_cmplx);
-
-	clock_enable(PERIPH_ID_CPU);
-}
-
-static int is_cpu_powered(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
-}
-
-static void remove_cpu_io_clamps(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Remove the clamps on the CPU I/O signals */
-	reg = readl(&pmc->pmc_remove_clamping);
-	reg |= CPU_CLMP;
-	writel(reg, &pmc->pmc_remove_clamping);
-
-	/* Give I/O signals time to stabilize */
-	udelay(IO_STABILIZATION_DELAY);
-}
-
-void powerup_cpu(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-	int timeout = IO_STABILIZATION_DELAY;
-
-	if (!is_cpu_powered()) {
-		/* Toggle the CPU power state (OFF -> ON) */
-		reg = readl(&pmc->pmc_pwrgate_toggle);
-		reg &= PARTID_CP;
-		reg |= START_CP;
-		writel(reg, &pmc->pmc_pwrgate_toggle);
-
-		/* Wait for the power to come up */
-		while (!is_cpu_powered()) {
-			if (timeout-- == 0)
-				printf("CPU failed to power up!\n");
-			else
-				udelay(10);
-		}
-
-		/*
-		 * Remove the I/O clamps from CPU power partition.
-		 * Recommended only on a Warm boot, if the CPU partition gets
-		 * power gated. Shouldn't cause any harm when called after a
-		 * cold boot according to HW, probably just redundant.
-		 */
-		remove_cpu_io_clamps();
-	}
-}
-
-void reset_A9_cpu(int reset)
-{
-	/*
-	* NOTE:  Regardless of whether the request is to hold the CPU in reset
-	*        or take it out of reset, every processor in the CPU complex
-	*        except the master (CPU 0) will be held in reset because the
-	*        AVP only talks to the master. The AVP does not know that there
-	*        are multiple processors in the CPU complex.
-	*/
-	int mask = crc_rst_cpu | crc_rst_de | crc_rst_debug;
-	int num_cpus = get_num_cpus();
-	int cpu;
-
-	debug("reset_a9_cpu entry\n");
-	/* Hold CPUs 1 onwards in reset, and CPU 0 if asked */
-	for (cpu = 1; cpu < num_cpus; cpu++)
-		reset_cmplx_set_enable(cpu, mask, 1);
-	reset_cmplx_set_enable(0, mask, reset);
-
-	/* Enable/Disable master CPU reset */
-	reset_set_enable(PERIPH_ID_CPU, reset);
-}
-
-void clock_enable_coresight(int enable)
-{
-	u32 rst, src = 2;
-
-	debug("clock_enable_coresight entry\n");
-	clock_set_enable(PERIPH_ID_CORESIGHT, enable);
-	reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
-
-	if (enable) {
-		/*
-		 * Put CoreSight on PLLP_OUT0 and divide it down as per
-		 * PLLP base frequency based on SoC type (T20/T30+).
-		 * Clock divider request would setup CSITE clock as 144MHz
-		 * for PLLP base 216MHz and 204MHz for PLLP base 408MHz
-		 */
-		src = CLK_DIVIDER(NVBL_PLLP_KHZ, CSITE_KHZ);
-		clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
-
-		/* Unlock the CPU CoreSight interfaces */
-		rst = CORESIGHT_UNLOCK;
-		writel(rst, CSITE_CPU_DBG0_LAR);
-		writel(rst, CSITE_CPU_DBG1_LAR);
-		if (get_num_cpus() == 4) {
-			writel(rst, CSITE_CPU_DBG2_LAR);
-			writel(rst, CSITE_CPU_DBG3_LAR);
-		}
-	}
-}
-
-void halt_avp(void)
-{
-	for (;;) {
-		writel(HALT_COP_EVENT_JTAG | (FLOW_MODE_STOP << 29),
-		       FLOW_CTLR_HALT_COP_EVENTS);
-	}
-}
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.h b/arch/arm/cpu/arm720t/tegra-common/cpu.h
deleted file mode 100644
index b4ca44fce1..0000000000
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2010-2014
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <asm/types.h>
-
-/* Stabilization delays, in usec */
-#define PLL_STABILIZATION_DELAY (300)
-#define IO_STABILIZATION_DELAY	(1000)
-
-#if defined(CONFIG_TEGRA20)
-#define NVBL_PLLP_KHZ	216000
-#define CSITE_KHZ	144000
-#elif defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) || \
-	defined(CONFIG_TEGRA124)
-#define NVBL_PLLP_KHZ	408000
-#define CSITE_KHZ	204000
-#else
-#error "Unknown Tegra chip!"
-#endif
-
-#define PLLX_ENABLED		(1 << 30)
-#define CCLK_BURST_POLICY	0x20008888
-#define SUPER_CCLK_DIVIDER	0x80000000
-
-/* Calculate clock fractional divider value from ref and target frequencies */
-#define CLK_DIVIDER(REF, FREQ)  ((((REF) * 2) / FREQ) - 2)
-
-/* Calculate clock frequency value from reference and clock divider value */
-#define CLK_FREQUENCY(REF, REG)  (((REF) * 2) / (REG + 2))
-
-/* AVP/CPU ID */
-#define PG_UP_TAG_0_PID_CPU	0x55555555	/* CPU aka "a9" aka "mpcore" */
-#define PG_UP_TAG_0             0x0
-
-#define CORESIGHT_UNLOCK	0xC5ACCE55;
-
-#define EXCEP_VECTOR_CPU_RESET_VECTOR	(NV_PA_EVP_BASE + 0x100)
-#define CSITE_CPU_DBG0_LAR		(NV_PA_CSITE_BASE + 0x10FB0)
-#define CSITE_CPU_DBG1_LAR		(NV_PA_CSITE_BASE + 0x12FB0)
-#define CSITE_CPU_DBG2_LAR		(NV_PA_CSITE_BASE + 0x14FB0)
-#define CSITE_CPU_DBG3_LAR		(NV_PA_CSITE_BASE + 0x16FB0)
-
-#define FLOW_CTLR_HALT_COP_EVENTS	(NV_PA_FLOW_BASE + 4)
-#define FLOW_MODE_STOP			2
-#define HALT_COP_EVENT_JTAG		(1 << 28)
-#define HALT_COP_EVENT_IRQ_1		(1 << 11)
-#define HALT_COP_EVENT_FIQ_1		(1 << 9)
-
-#define FLOW_MODE_NONE		0
-
-#define SIMPLE_PLLX     (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
-
-struct clk_pll_table {
-	u16	n;
-	u16	m;
-	u8	p;
-	u8	cpcon;
-};
-
-void clock_enable_coresight(int enable);
-void enable_cpu_clock(int enable);
-void halt_avp(void)  __attribute__ ((noreturn));
-void init_pllx(void);
-void powerup_cpu(void);
-void reset_A9_cpu(int reset);
-void start_cpu(u32 reset_vector);
-int tegra_get_chip(void);
-int tegra_get_sku_info(void);
-int tegra_get_chip_sku(void);
-void adjust_pllp_out_freqs(void);
-void pmic_enable_cpu_vdd(void);
diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
deleted file mode 100644
index e0f9d5b6b4..0000000000
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2012
- * NVIDIA Inc, <www.nvidia.com>
- *
- * Allen Martin <amartin@nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <spl.h>
-
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/apb_misc.h>
-#include <asm/arch-tegra/board.h>
-#include <asm/spl.h>
-#include "cpu.h"
-
-void spl_board_init(void)
-{
-	struct apb_misc_pp_ctlr *apb_misc =
-				(struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
-
-	/* enable JTAG */
-	writel(0xC0, &apb_misc->cfg_ctl);
-
-	board_init_uart_f();
-
-	/* Initialize periph GPIOs */
-	gpio_early_init_uart();
-
-	clock_early_init();
-	preloader_console_init();
-}
-
-u32 spl_boot_device(void)
-{
-	return BOOT_DEVICE_RAM;
-}
-
-void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
-{
-	debug("image entry point: 0x%X\n", spl_image->entry_point);
-
-	start_cpu((u32)spl_image->entry_point);
-	halt_avp();
-}
diff --git a/arch/arm/cpu/arm720t/tegra114/Makefile b/arch/arm/cpu/arm720t/tegra114/Makefile
deleted file mode 100644
index ea3e55ea62..0000000000
--- a/arch/arm/cpu/arm720t/tegra114/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-#obj-y	+= cpu.o t11x.o
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c
deleted file mode 100644
index 5ed3bb9d9a..0000000000
--- a/arch/arm/cpu/arm720t/tegra114/cpu.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/flow.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include "../tegra-common/cpu.h"
-
-/* Tegra114-specific CPU init code */
-static void enable_cpu_power_rail(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("enable_cpu_power_rail entry\n");
-
-	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
-
-	/*
-	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
-	 * set it for 25ms (102MHz * .025)
-	 */
-	reg = 0x26E8F0;
-	writel(reg, &pmc->pmc_cpupwrgood_timer);
-
-	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
-	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
-	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
-
-	/*
-	 * Set CLK_RST_CONTROLLER_CPU_SOFTRST_CTRL2_0_CAR2PMC_CPU_ACK_WIDTH
-	 * to 408 to satisfy the requirement of having at least 16 CPU clock
-	 * cycles before clamp removal.
-	 */
-
-	clrbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 0xFFF);
-	setbits_le32(&clkrst->crc_cpu_softrst_ctrl2, 408);
-}
-
-static void enable_cpu_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("enable_cpu_clocks entry\n");
-
-	/* Wait for PLL-X to lock */
-	do {
-		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-	} while ((reg & PLL_LOCK_MASK) == 0);
-
-	/* Wait until all clocks are stable */
-	udelay(PLL_STABILIZATION_DELAY);
-
-	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
-	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
-
-	/* Always enable the main CPU complex clocks */
-	clock_enable(PERIPH_ID_CPU);
-	clock_enable(PERIPH_ID_CPULP);
-	clock_enable(PERIPH_ID_CPUG);
-}
-
-static void remove_cpu_resets(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("remove_cpu_resets entry\n");
-	/* Take the slow non-CPU partition out of reset */
-	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
-	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpulp_cmplx_clr);
-
-	/* Take the fast non-CPU partition out of reset */
-	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
-	writel((reg | CLR_NONCPURESET), &clkrst->crc_rst_cpug_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the slow cluster */
-	reg = readl(&clkrst->crc_rst_cpulp_cmplx_clr);
-	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
-	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the fast cluster */
-	reg = readl(&clkrst->crc_rst_cpug_cmplx_clr);
-	reg |= (CLR_CPURESET0+CLR_DBGRESET0+CLR_CORERESET0+CLR_CXRESET0);
-	reg |= (CLR_CPURESET1+CLR_DBGRESET1+CLR_CORERESET1+CLR_CXRESET1);
-	reg |= (CLR_CPURESET2+CLR_DBGRESET2+CLR_CORERESET2+CLR_CXRESET2);
-	reg |= (CLR_CPURESET3+CLR_DBGRESET3+CLR_CORERESET3+CLR_CXRESET3);
-	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
-}
-
-/**
- * The T114 requires some special clock initialization, including setting up
- * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
- */
-void t114_init_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
-	u32 val;
-
-	debug("t114_init_clocks entry\n");
-
-	/* Set active CPU cluster to G */
-	clrbits_le32(&flow->cluster_control, 1);
-
-	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
-
-	debug("Setting up PLLX\n");
-	init_pllx();
-
-	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
-	writel(val, &clkrst->crc_clk_sys_rate);
-
-	/* Enable clocks to required peripherals. TBD - minimize this list */
-	debug("Enabling clocks\n");
-
-	clock_set_enable(PERIPH_ID_CACHE2, 1);
-	clock_set_enable(PERIPH_ID_GPIO, 1);
-	clock_set_enable(PERIPH_ID_TMR, 1);
-	clock_set_enable(PERIPH_ID_RTC, 1);
-	clock_set_enable(PERIPH_ID_CPU, 1);
-	clock_set_enable(PERIPH_ID_EMC, 1);
-	clock_set_enable(PERIPH_ID_I2C5, 1);
-	clock_set_enable(PERIPH_ID_FUSE, 1);
-	clock_set_enable(PERIPH_ID_PMC, 1);
-	clock_set_enable(PERIPH_ID_APBDMA, 1);
-	clock_set_enable(PERIPH_ID_MEM, 1);
-	clock_set_enable(PERIPH_ID_IRAMA, 1);
-	clock_set_enable(PERIPH_ID_IRAMB, 1);
-	clock_set_enable(PERIPH_ID_IRAMC, 1);
-	clock_set_enable(PERIPH_ID_IRAMD, 1);
-	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
-	clock_set_enable(PERIPH_ID_MSELECT, 1);
-	clock_set_enable(PERIPH_ID_EMC1, 1);
-	clock_set_enable(PERIPH_ID_MC1, 1);
-	clock_set_enable(PERIPH_ID_DVFS, 1);
-
-	/*
-	 * Set MSELECT clock source as PLLP (00), and ask for a clock
-	 * divider that would set the MSELECT clock at 102MHz for a
-	 * PLLP base of 408MHz.
-	 */
-	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
-		CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
-
-	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
-	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
-
-	/* Give clocks time to stabilize */
-	udelay(1000);
-
-	/* Take required peripherals out of reset */
-	debug("Taking periphs out of reset\n");
-	reset_set_enable(PERIPH_ID_CACHE2, 0);
-	reset_set_enable(PERIPH_ID_GPIO, 0);
-	reset_set_enable(PERIPH_ID_TMR, 0);
-	reset_set_enable(PERIPH_ID_COP, 0);
-	reset_set_enable(PERIPH_ID_EMC, 0);
-	reset_set_enable(PERIPH_ID_I2C5, 0);
-	reset_set_enable(PERIPH_ID_FUSE, 0);
-	reset_set_enable(PERIPH_ID_APBDMA, 0);
-	reset_set_enable(PERIPH_ID_MEM, 0);
-	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
-	reset_set_enable(PERIPH_ID_MSELECT, 0);
-	reset_set_enable(PERIPH_ID_EMC1, 0);
-	reset_set_enable(PERIPH_ID_MC1, 0);
-	reset_set_enable(PERIPH_ID_DVFS, 0);
-
-	debug("t114_init_clocks exit\n");
-}
-
-static bool is_partition_powered(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Get power gate status */
-	reg = readl(&pmc->pmc_pwrgate_status);
-	return !!(reg & (1 << partid));
-}
-
-static bool is_clamp_enabled(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Get clamp status. */
-	reg = readl(&pmc->pmc_clamp_status);
-	return !!(reg & (1 << partid));
-}
-
-static void power_partition(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	debug("%s: part ID = %08X\n", __func__, partid);
-	/* Is the partition already on? */
-	if (!is_partition_powered(partid)) {
-		/* No, toggle the partition power state (OFF -> ON) */
-		debug("power_partition, toggling state\n");
-		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
-
-		/* Wait for the power to come up */
-		while (!is_partition_powered(partid))
-			;
-
-		/* Wait for the clamp status to be cleared */
-		while (is_clamp_enabled(partid))
-			;
-
-		/* Give I/O signals time to stabilize */
-		udelay(IO_STABILIZATION_DELAY);
-	}
-}
-
-void powerup_cpus(void)
-{
-	debug("powerup_cpus entry\n");
-
-	/* We boot to the fast cluster */
-	debug("powerup_cpus entry: G cluster\n");
-	/* Power up the fast cluster rail partition */
-	power_partition(CRAIL);
-
-	/* Power up the fast cluster non-CPU partition */
-	power_partition(C0NC);
-
-	/* Power up the fast cluster CPU0 partition */
-	power_partition(CE0);
-}
-
-void start_cpu(u32 reset_vector)
-{
-	u32 imme, inst;
-
-	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
-
-	t114_init_clocks();
-
-	/* Enable VDD_CPU */
-	enable_cpu_power_rail();
-
-	/* Get the CPU(s) running */
-	enable_cpu_clocks();
-
-	/* Enable CoreSight */
-	clock_enable_coresight(1);
-
-	/* Take CPU(s) out of reset */
-	remove_cpu_resets();
-
-	/* Set the entry point for CPU execution from reset */
-
-	/*
-	 * A01P with patched boot ROM; vector hard-coded to 0x4003fffc.
-	 * See nvbug 1193357 for details.
-	 */
-
-	/* mov r0, #lsb(reset_vector) */
-	imme = reset_vector & 0xffff;
-	inst = imme & 0xfff;
-	inst |= ((imme >> 12) << 16);
-	inst |= 0xe3000000;
-	writel(inst, 0x4003fff0);
-
-	/* movt r0, #msb(reset_vector) */
-	imme = (reset_vector >> 16) & 0xffff;
-	inst = imme & 0xfff;
-	inst |= ((imme >> 12) << 16);
-	inst |= 0xe3400000;
-	writel(inst, 0x4003fff4);
-
-	/* bx r0 */
-	writel(0xe12fff10, 0x4003fff8);
-
-	/* b -12 */
-	imme = (u32)-20;
-	inst = (imme >> 2) & 0xffffff;
-	inst |= 0xea000000;
-	writel(inst, 0x4003fffc);
-
-	/* Write to orignal location for compatibility */
-	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
-	/* If the CPU(s) don't already have power, power 'em up */
-	powerup_cpus();
-}
diff --git a/arch/arm/cpu/arm720t/tegra124/Makefile b/arch/arm/cpu/arm720t/tegra124/Makefile
deleted file mode 100644
index 61abf45d3d..0000000000
--- a/arch/arm/cpu/arm720t/tegra124/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2013-2014
-# NVIDIA Corporation <www.nvidia.com>
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra124/cpu.c b/arch/arm/cpu/arm720t/tegra124/cpu.c
deleted file mode 100644
index 6ff6aeb546..0000000000
--- a/arch/arm/cpu/arm720t/tegra124/cpu.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * (C) Copyright 2013
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ahb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/flow.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/ap.h>
-#include "../tegra-common/cpu.h"
-
-/* Tegra124-specific CPU init code */
-
-static void enable_cpu_power_rail(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	debug("enable_cpu_power_rail entry\n");
-
-	/* un-tristate PWR_I2C SCL/SDA, rest of the defaults are correct */
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SCL_PZ6);
-	pinmux_tristate_disable(PMUX_PINGRP_PWR_I2C_SDA_PZ7);
-
-	pmic_enable_cpu_vdd();
-
-	/*
-	 * Set CPUPWRGOOD_TIMER - APB clock is 1/2 of SCLK (102MHz),
-	 * set it for 5ms as per SysEng (102MHz*5ms = 510000 (7C830h).
-	 */
-	writel(0x7C830, &pmc->pmc_cpupwrgood_timer);
-
-	/* Set polarity to 0 (normal) and enable CPUPWRREQ_OE */
-	clrbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_POL);
-	setbits_le32(&pmc->pmc_cntrl, CPUPWRREQ_OE);
-}
-
-static void enable_cpu_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("enable_cpu_clocks entry\n");
-
-	/* Wait for PLL-X to lock */
-	do {
-		reg = readl(&clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-		debug("%s: PLLX base = 0x%08X\n", __func__, reg);
-	} while ((reg & PLL_LOCK_MASK) == 0);
-
-	debug("%s: PLLX locked, delay for stable clocks\n", __func__);
-	/* Wait until all clocks are stable */
-	udelay(PLL_STABILIZATION_DELAY);
-
-	debug("%s: Setting CCLK_BURST and DIVIDER\n", __func__);
-	writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
-	writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
-
-	debug("%s: Enabling clock to all CPUs\n", __func__);
-	/* Enable the clock to all CPUs */
-	reg = CLR_CPU3_CLK_STP | CLR_CPU2_CLK_STP | CLR_CPU1_CLK_STP |
-		CLR_CPU0_CLK_STP;
-	writel(reg, &clkrst->crc_clk_cpu_cmplx_clr);
-
-	debug("%s: Enabling main CPU complex clocks\n", __func__);
-	/* Always enable the main CPU complex clocks */
-	clock_enable(PERIPH_ID_CPU);
-	clock_enable(PERIPH_ID_CPULP);
-	clock_enable(PERIPH_ID_CPUG);
-
-	debug("%s: Done\n", __func__);
-}
-
-static void remove_cpu_resets(void)
-{
-	struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
-
-	debug("remove_cpu_resets entry\n");
-
-	/* Take the slow and fast partitions out of reset */
-	reg = CLR_NONCPURESET;
-	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
-	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the slow cluster */
-	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
-		CLR_L2RESET | CLR_PRESETDBG;
-	writel(reg, &clkrst->crc_rst_cpulp_cmplx_clr);
-
-	/* Clear the SW-controlled reset of the fast cluster */
-	reg = CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0 |
-		CLR_CPURESET1 | CLR_DBGRESET1 | CLR_CORERESET1 | CLR_CXRESET1 |
-		CLR_CPURESET2 | CLR_DBGRESET2 | CLR_CORERESET2 | CLR_CXRESET2 |
-		CLR_CPURESET3 | CLR_DBGRESET3 | CLR_CORERESET3 | CLR_CXRESET3 |
-		CLR_L2RESET | CLR_PRESETDBG;
-	writel(reg, &clkrst->crc_rst_cpug_cmplx_clr);
-}
-
-/**
- * The Tegra124 requires some special clock initialization, including setting up
- * the DVC I2C, turning on MSELECT and selecting the G CPU cluster
- */
-void tegra124_init_clocks(void)
-{
-	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 val;
-
-	debug("tegra124_init_clocks entry\n");
-
-	/* Set active CPU cluster to G */
-	clrbits_le32(&flow->cluster_control, 1);
-
-	/* Change the oscillator drive strength */
-	val = readl(&clkrst->crc_osc_ctrl);
-	val &= ~OSC_XOFS_MASK;
-	val |= (OSC_DRIVE_STRENGTH << OSC_XOFS_SHIFT);
-	writel(val, &clkrst->crc_osc_ctrl);
-
-	/* Update same value in PMC_OSC_EDPD_OVER XOFS field for warmboot */
-	val = readl(&pmc->pmc_osc_edpd_over);
-	val &= ~PMC_XOFS_MASK;
-	val |= (OSC_DRIVE_STRENGTH << PMC_XOFS_SHIFT);
-	writel(val, &pmc->pmc_osc_edpd_over);
-
-	/* Set HOLD_CKE_LOW_EN to 1 */
-	setbits_le32(&pmc->pmc_cntrl2, HOLD_CKE_LOW_EN);
-
-	debug("Setting up PLLX\n");
-	init_pllx();
-
-	val = (1 << CLK_SYS_RATE_AHB_RATE_SHIFT);
-	writel(val, &clkrst->crc_clk_sys_rate);
-
-	/* Enable clocks to required peripherals. TBD - minimize this list */
-	debug("Enabling clocks\n");
-
-	clock_set_enable(PERIPH_ID_CACHE2, 1);
-	clock_set_enable(PERIPH_ID_GPIO, 1);
-	clock_set_enable(PERIPH_ID_TMR, 1);
-	clock_set_enable(PERIPH_ID_CPU, 1);
-	clock_set_enable(PERIPH_ID_EMC, 1);
-	clock_set_enable(PERIPH_ID_I2C5, 1);
-	clock_set_enable(PERIPH_ID_APBDMA, 1);
-	clock_set_enable(PERIPH_ID_MEM, 1);
-	clock_set_enable(PERIPH_ID_CORESIGHT, 1);
-	clock_set_enable(PERIPH_ID_MSELECT, 1);
-	clock_set_enable(PERIPH_ID_DVFS, 1);
-
-	/*
-	 * Set MSELECT clock source as PLLP (00), and ask for a clock
-	 * divider that would set the MSELECT clock at 102MHz for a
-	 * PLLP base of 408MHz.
-	 */
-	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0,
-				    CLK_DIVIDER(NVBL_PLLP_KHZ, 102000));
-
-	/* Give clock time to stabilize */
-	udelay(IO_STABILIZATION_DELAY);
-
-	/* I2C5 (DVC) gets CLK_M and a divisor of 17 */
-	clock_ll_set_source_divisor(PERIPH_ID_I2C5, 3, 16);
-
-	/* Give clock time to stabilize */
-	udelay(IO_STABILIZATION_DELAY);
-
-	/* Take required peripherals out of reset */
-	debug("Taking periphs out of reset\n");
-	reset_set_enable(PERIPH_ID_CACHE2, 0);
-	reset_set_enable(PERIPH_ID_GPIO, 0);
-	reset_set_enable(PERIPH_ID_TMR, 0);
-	reset_set_enable(PERIPH_ID_COP, 0);
-	reset_set_enable(PERIPH_ID_EMC, 0);
-	reset_set_enable(PERIPH_ID_I2C5, 0);
-	reset_set_enable(PERIPH_ID_APBDMA, 0);
-	reset_set_enable(PERIPH_ID_MEM, 0);
-	reset_set_enable(PERIPH_ID_CORESIGHT, 0);
-	reset_set_enable(PERIPH_ID_MSELECT, 0);
-	reset_set_enable(PERIPH_ID_DVFS, 0);
-
-	debug("tegra124_init_clocks exit\n");
-}
-
-static bool is_partition_powered(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	/* Get power gate status */
-	reg = readl(&pmc->pmc_pwrgate_status);
-	return !!(reg & (1 << partid));
-}
-
-static void power_partition(u32 partid)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	debug("%s: part ID = %08X\n", __func__, partid);
-	/* Is the partition already on? */
-	if (!is_partition_powered(partid)) {
-		/* No, toggle the partition power state (OFF -> ON) */
-		debug("power_partition, toggling state\n");
-		writel(START_CP | partid, &pmc->pmc_pwrgate_toggle);
-
-		/* Wait for the power to come up */
-		while (!is_partition_powered(partid))
-			;
-
-		/* Give I/O signals time to stabilize */
-		udelay(IO_STABILIZATION_DELAY);
-	}
-}
-
-void powerup_cpus(void)
-{
-	debug("powerup_cpus entry\n");
-
-	/* We boot to the fast cluster */
-	debug("powerup_cpus entry: G cluster\n");
-
-	/* Power up the fast cluster rail partition */
-	debug("powerup_cpus: CRAIL\n");
-	power_partition(CRAIL);
-
-	/* Power up the fast cluster non-CPU partition */
-	debug("powerup_cpus: C0NC\n");
-	power_partition(C0NC);
-
-	/* Power up the fast cluster CPU0 partition */
-	debug("powerup_cpus: CE0\n");
-	power_partition(CE0);
-
-	debug("powerup_cpus: done\n");
-}
-
-void start_cpu(u32 reset_vector)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-
-	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
-
-	tegra124_init_clocks();
-
-	/* Set power-gating timer multiplier */
-	writel((MULT_8 << TIMER_MULT_SHIFT) | (MULT_8 << TIMER_MULT_CPU_SHIFT),
-	       &pmc->pmc_pwrgate_timer_mult);
-
-	enable_cpu_power_rail();
-	enable_cpu_clocks();
-	clock_enable_coresight(1);
-	remove_cpu_resets();
-	writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-	powerup_cpus();
-	debug("start_cpu exit, should continue @ reset_vector\n");
-}
diff --git a/arch/arm/cpu/arm720t/tegra20/Makefile b/arch/arm/cpu/arm720t/tegra20/Makefile
deleted file mode 100644
index 12243fa9be..0000000000
--- a/arch/arm/cpu/arm720t/tegra20/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra20/cpu.c b/arch/arm/cpu/arm720t/tegra20/cpu.c
deleted file mode 100644
index 253389955f..0000000000
--- a/arch/arm/cpu/arm720t/tegra20/cpu.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/pmc.h>
-#include "../tegra-common/cpu.h"
-
-static void enable_cpu_power_rail(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	reg = readl(&pmc->pmc_cntrl);
-	reg |= CPUPWRREQ_OE;
-	writel(reg, &pmc->pmc_cntrl);
-
-	/*
-	 * The TI PMU65861C needs a 3.75ms delay between enabling
-	 * the power rail and enabling the CPU clock.  This delay
-	 * between SM1EN and SM1 is for switching time + the ramp
-	 * up of the voltage to the CPU (VDD_CPU from PMU).
-	 */
-	udelay(3750);
-}
-
-void start_cpu(u32 reset_vector)
-{
-	/* Enable VDD_CPU */
-	enable_cpu_power_rail();
-
-	/* Hold the CPUs in reset */
-	reset_A9_cpu(1);
-
-	/* Disable the CPU clock */
-	enable_cpu_clock(0);
-
-	/* Enable CoreSight */
-	clock_enable_coresight(1);
-
-	/*
-	 * Set the entry point for CPU execution from reset,
-	 *  if it's a non-zero value.
-	 */
-	if (reset_vector)
-		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
-	/* Enable the CPU clock */
-	enable_cpu_clock(1);
-
-	/* If the CPU doesn't already have power, power it up */
-	powerup_cpu();
-
-	/* Take the CPU out of reset */
-	reset_A9_cpu(0);
-}
diff --git a/arch/arm/cpu/arm720t/tegra30/Makefile b/arch/arm/cpu/arm720t/tegra30/Makefile
deleted file mode 100644
index 6ff4c55213..0000000000
--- a/arch/arm/cpu/arm720t/tegra30/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-obj-y	+= cpu.o
diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c
deleted file mode 100644
index 9003902e3f..0000000000
--- a/arch/arm/cpu/arm720t/tegra30/cpu.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Copyright (c) 2010-2014, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/flow.h>
-#include <asm/arch/tegra.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/tegra_i2c.h>
-#include "../tegra-common/cpu.h"
-
-/* Tegra30-specific CPU init code */
-void tegra_i2c_ll_write_addr(uint addr, uint config)
-{
-	struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
-
-	writel(addr, &reg->cmd_addr0);
-	writel(config, &reg->cnfg);
-}
-
-void tegra_i2c_ll_write_data(uint data, uint config)
-{
-	struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE;
-
-	writel(data, &reg->cmd_data1);
-	writel(config, &reg->cnfg);
-}
-
-#define TPS62366A_I2C_ADDR		0xC0
-#define TPS62366A_SET1_REG		0x01
-#define TPS62366A_SET1_DATA		(0x4600 | TPS62366A_SET1_REG)
-
-#define TPS62361B_I2C_ADDR		0xC0
-#define TPS62361B_SET3_REG		0x03
-#define TPS62361B_SET3_DATA		(0x4600 | TPS62361B_SET3_REG)
-
-#define TPS65911_I2C_ADDR		0x5A
-#define TPS65911_VDDCTRL_OP_REG		0x28
-#define TPS65911_VDDCTRL_SR_REG		0x27
-#define TPS65911_VDDCTRL_OP_DATA	(0x2400 | TPS65911_VDDCTRL_OP_REG)
-#define TPS65911_VDDCTRL_SR_DATA	(0x0100 | TPS65911_VDDCTRL_SR_REG)
-#define I2C_SEND_2_BYTES		0x0A02
-
-static void enable_cpu_power_rail(void)
-{
-	struct pmc_ctlr *pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE;
-	u32 reg;
-
-	debug("enable_cpu_power_rail entry\n");
-	reg = readl(&pmc->pmc_cntrl);
-	reg |= CPUPWRREQ_OE;
-	writel(reg, &pmc->pmc_cntrl);
-
-	/* Set VDD_CORE to 1.200V. */
-#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
-	tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2);
-	tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES);
-#endif
-#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
-	tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2);
-	tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES);
-#endif
-	udelay(1000);
-
-	/*
-	 * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
-	 * First set VDD to 1.0125V, then enable the VDD regulator.
-	 */
-	tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2);
-	tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES);
-	udelay(1000);
-	tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES);
-	udelay(10 * 1000);
-}
-
-/**
- * The T30 requires some special clock initialization, including setting up
- * the dvc i2c, turning on mselect and selecting the G CPU cluster
- */
-void t30_init_clocks(void)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
-	u32 val;
-
-	debug("t30_init_clocks entry\n");
-	/* Set active CPU cluster to G */
-	clrbits_le32(flow->cluster_control, 1 << 0);
-
-	writel(SUPER_SCLK_ENB_MASK, &clkrst->crc_super_sclk_div);
-
-	val = (0 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT) |
-		(1 << CLK_SYS_RATE_AHB_RATE_SHIFT) |
-		(0 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT) |
-		(0 << CLK_SYS_RATE_APB_RATE_SHIFT);
-	writel(val, &clkrst->crc_clk_sys_rate);
-
-	/* Put i2c, mselect in reset and enable clocks */
-	reset_set_enable(PERIPH_ID_DVC_I2C, 1);
-	clock_set_enable(PERIPH_ID_DVC_I2C, 1);
-	reset_set_enable(PERIPH_ID_MSELECT, 1);
-	clock_set_enable(PERIPH_ID_MSELECT, 1);
-
-	/* Switch MSELECT clock to PLLP (00) and use a divisor of 2 */
-	clock_ll_set_source_divisor(PERIPH_ID_MSELECT, 0, 2);
-
-	/*
-	 * Our high-level clock routines are not available prior to
-	 * relocation. We use the low-level functions which require a
-	 * hard-coded divisor. Use CLK_M with divide by (n + 1 = 17)
-	 */
-	clock_ll_set_source_divisor(PERIPH_ID_DVC_I2C, 3, 16);
-
-	/*
-	 * Give clocks time to stabilize, then take i2c and mselect out of
-	 * reset
-	 */
-	udelay(1000);
-	reset_set_enable(PERIPH_ID_DVC_I2C, 0);
-	reset_set_enable(PERIPH_ID_MSELECT, 0);
-}
-
-static void set_cpu_running(int run)
-{
-	struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
-
-	debug("set_cpu_running entry, run = %d\n", run);
-	writel(run ? FLOW_MODE_NONE : FLOW_MODE_STOP, &flow->halt_cpu_events);
-}
-
-void start_cpu(u32 reset_vector)
-{
-	debug("start_cpu entry, reset_vector = %x\n", reset_vector);
-	t30_init_clocks();
-
-	/* Enable VDD_CPU */
-	enable_cpu_power_rail();
-
-	set_cpu_running(0);
-
-	/* Hold the CPUs in reset */
-	reset_A9_cpu(1);
-
-	/* Disable the CPU clock */
-	enable_cpu_clock(0);
-
-	/* Enable CoreSight */
-	clock_enable_coresight(1);
-
-	/*
-	 * Set the entry point for CPU execution from reset,
-	 *  if it's a non-zero value.
-	 */
-	if (reset_vector)
-		writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
-	/* Enable the CPU clock */
-	enable_cpu_clock(1);
-
-	/* If the CPU doesn't already have power, power it up */
-	powerup_cpu();
-
-	/* Take the CPU out of reset */
-	reset_A9_cpu(0);
-
-	set_cpu_running(1);
-}