i2c: Remove deprecated individual i2c commands

The following individual I2C commands have been removed: imd, imm, inm,
imw, icrc32, iprobe, iloop, isdram.

The functionality of the individual commands is still available via
the 'i2c' command.

This change only has an impact on those boards which did not have
CONFIG_I2C_CMD_TREE defined.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

26 files changed, 0 insertions, 98 deletions

diff --git a/README b/README
index 142dbccec1..03ad69a8b6 100644
--- a/README
+++ b/README
@@ -1315,11 +1315,6 @@ The following options need to be configured:
 		clock chips. See common/cmd_i2c.c for a description of the
 		command line interface.
 
-		CONFIG_I2C_CMD_TREE is a recommended option that places
-		all I2C commands under a single 'i2c' root command.  The
-		older 'imm', 'imd', 'iprobe' etc. commands are considered
-		deprecated and may disappear in the future.
-
 		CONFIG_HARD_I2C selects a hardware I2C controller.
 
 		CONFIG_SOFT_I2C configures u-boot to use a software (aka
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c071df7326..fd9f9a44f8 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1204,7 +1204,6 @@ int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 }
 #endif
 
-#if defined(CONFIG_I2C_CMD_TREE)
 int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1314,11 +1313,9 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 		cmd_usage(cmdtp);
 	return 0;
 }
-#endif  /* CONFIG_I2C_CMD_TREE */
 
 /***************************************************/
 
-#if defined(CONFIG_I2C_CMD_TREE)
 U_BOOT_CMD(
 	i2c, 6, 1, do_i2c,
 	"I2C sub-system",
@@ -1341,61 +1338,6 @@ U_BOOT_CMD(
 	"i2c sdram chip - print SDRAM configuration information\n"
 #endif
 );
-#endif /* CONFIG_I2C_CMD_TREE */
-U_BOOT_CMD(
-	imd,	4,	1,	do_i2c_md,		\
-	"i2c memory display",				\
-	"chip address[.0, .1, .2] [# of objects]\n    - i2c memory display\n" \
-);
-
-U_BOOT_CMD(
-	imm,	3,	1,	do_i2c_mm,
-	"i2c memory modify (auto-incrementing)",
-	"chip address[.0, .1, .2]\n"
-	"    - memory modify, auto increment address\n"
-);
-U_BOOT_CMD(
-	inm,	3,	1,	do_i2c_nm,
-	"memory modify (constant address)",
-	"chip address[.0, .1, .2]\n    - memory modify, read and keep address\n"
-);
-
-U_BOOT_CMD(
-	imw,	5,	1,	do_i2c_mw,
-	"memory write (fill)",
-	"chip address[.0, .1, .2] value [count]\n    - memory write (fill)\n"
-);
-
-U_BOOT_CMD(
-	icrc32,	5,	1,	do_i2c_crc,
-	"checksum calculation",
-	"chip address[.0, .1, .2] count\n    - compute CRC32 checksum\n"
-);
-
-U_BOOT_CMD(
-	iprobe,	1,	1,	do_i2c_probe,
-	"probe to discover valid I2C chip addresses",
-	"\n    -discover valid I2C chip addresses\n"
-);
-
-/*
- * Require full name for "iloop" because it is an infinite loop!
- */
-U_BOOT_CMD(
-	iloop,	5,	1,	do_i2c_loop,
-	"infinite loop on address range",
-	"chip address[.0, .1, .2] [# of objects]\n"
-	"    - loop, reading a set of addresses\n"
-);
-
-#if defined(CONFIG_CMD_SDRAM)
-U_BOOT_CMD(
-	isdram,	2,	1,	do_sdram,
-	"print SDRAM configuration information",
-	"chip\n    - print SDRAM configuration information\n"
-	"      (valid chip values 50..57)\n"
-);
-#endif
 
 #if defined(CONFIG_I2C_MUX)
 
diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt
index b1f0582f7b..9bbdc0a832 100644
--- a/doc/feature-removal-schedule.txt
+++ b/doc/feature-removal-schedule.txt
@@ -59,18 +59,6 @@ Who:	Wolfgang Denk <wd@denx.de> and board maintainers
 
 ---------------------------
 
-What:	Individual I2C commands
-When:	April 2009
-Why:	Per the U-Boot README, individual I2C commands such as "imd", "imm",
-	"imw", etc are deprecated.  The single "i2c" command which is
-	currently enabled via CONFIG_I2C_CMD_TREE contains the same
-	functionality as the individual I2C commands.  The individual
-	I2C commands should be removed as well as any references to
-	CONFIG_I2C_CMD_TREE.
-Who:	Peter Tyser <ptyser@xes-inc.com>
-
----------------------------
-
 What:	Legacy NAND code
 When:	April 2009
 Why:	Legacy NAND code is deprecated.  Similar functionality exists in
diff --git a/include/configs/DU405.h b/include/configs/DU405.h
index d1edd244b4..cfb3023318 100644
--- a/include/configs/DU405.h
+++ b/include/configs/DU405.h
@@ -211,7 +211,6 @@
 /*-----------------------------------------------------------------------
  * I2C EEPROM (CAT24WC08) for environment
  */
-#define CONFIG_I2C_CMD_TREE     1
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index e6abbdc5f3..e9ea1bf7d0 100644
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -170,7 +170,6 @@
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged	        */
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_I2C_CMD_TREE     1
 #define CONFIG_I2C_MULTI_BUS    1
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 21aedee872..52d27a1e40 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -321,7 +321,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 2d2799e111..35ab88f080 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -315,7 +315,6 @@
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index ab6fe55c49..ef0a09fbd7 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -95,7 +95,6 @@
 
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_SYS_SPD_BUS_NUM		1	/* The I2C bus for SPD */
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index 477a1c5821..138750459d 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -265,7 +265,6 @@
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE	0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{{0x52}} /* Don't probe these addrs */
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index bbb448d55f..bc1267f49f 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{{0, 0x29}}	/* Don't probe these addrs */
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 77224d98e7..ac34047371 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -287,7 +287,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x52
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 0ee40c6180..77946ceae4 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -239,7 +239,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE	0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index b60b3641f4..2aba689664 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -378,7 +378,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
 #define CONFIG_SYS_I2C_SLAVE		0x7F
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 8f741f58bb..9fd27e3d57 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -53,7 +53,6 @@
 
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 
diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h
index fc48bc1db6..012ae798d1 100644
--- a/include/configs/PMC440.h
+++ b/include/configs/PMC440.h
@@ -230,7 +230,6 @@
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CONFIG_I2C_CMD_TREE	1
 #define CONFIG_I2C_MULTI_BUS	1
 
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 79582e16c7..88ea7c7c93 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -223,7 +223,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #define CONFIG_FSL_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_NOPROBES		{{0,0x69}} /* Don't probe these addrs */
diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h
index 370aae1c4c..89ab69272b 100644
--- a/include/configs/XPEDITE5200.h
+++ b/include/configs/XPEDITE5200.h
@@ -226,7 +226,6 @@
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* I2C EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h
index a353a14e7d..536e063385 100644
--- a/include/configs/XPEDITE5370.h
+++ b/include/configs/XPEDITE5370.h
@@ -244,7 +244,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 
 /* PEX8518 slave I2C interface */
 #define CONFIG_SYS_I2C_PEX8518_ADDR	0x70
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index d87902468e..b1420fa888 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -287,7 +287,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support */
 #undef CONFIG_SOFT_I2C			/* so disable bit-banged I2C */
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #if 0
diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h
index a018873fd6..c898c73046 100644
--- a/include/configs/at91rm9200ek.h
+++ b/include/configs/at91rm9200ek.h
@@ -266,7 +266,6 @@
 
 #ifdef CONFIG_HARD_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		0	/* not used */
 #define CONFIG_SYS_I2C_SLAVE		0	/* not used */
 #endif
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 0d89594f20..3840267312 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -129,7 +129,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
 
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
 
 #define IIC0_BOOTPROM_ADDR	0x50
diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h
index b2e37ec222..0fcf692d18 100644
--- a/include/configs/keymile-common.h
+++ b/include/configs/keymile-common.h
@@ -97,7 +97,6 @@
 #define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
 
 #define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_I2C_CMD_TREE	1
 #define CONFIG_SYS_MAX_I2C_BUS		2
 #define CONFIG_SYS_I2C_INIT_BOARD	1
 #define CONFIG_I2C_MUX		1
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index f7fc6c5bff..61250adfed 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -314,7 +314,6 @@
 #define CONFIG_SYS_I2C_SLAVE	0x7F
 #define CONFIG_SYS_I2C_OFFSET	0x3000
 #define CONFIG_I2C_MULTI_BUS	1
-#define CONFIG_I2C_CMD_TREE	1
 #define CONFIG_SYS_MAX_I2C_BUS		2
 #define CONFIG_I2C_MUX		1
 
diff --git a/include/configs/korat.h b/include/configs/korat.h
index eb2c1d43b4..ea6ba8938d 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -282,7 +282,6 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_I2C
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index edd928d81b..b89fe12c56 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -279,7 +279,6 @@
 #define CONFIG_HARD_I2C			/* I2C with hardware support*/
 #undef CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CONFIG_FSL_I2C
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
diff --git a/include/configs/socrates.h b/include/configs/socrates.h
index becd13eace..5b91b4d7c7 100644
--- a/include/configs/socrates.h
+++ b/include/configs/socrates.h
@@ -243,7 +243,6 @@
 #define CONFIG_SYS_I2C_OFFSET		0x3000
 
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_I2C_CMD_TREE
 #define CONFIG_SYS_I2C2_OFFSET		0x3100
 
 /* I2C RTC */