Merge branch 'master' of git://git.denx.de/u-boot-arm

22 files changed, 463 insertions, 90 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index bb03f17784..0658bc327e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -616,6 +616,10 @@ Simon Kagstrom <simon.kagstrom@netinsight.net>
 
        openrd_base     ARM926EJS (Kirkwood SoC)
 
+Minkyu Kang <mk7.kang@samsung.com>
+
+	SMDKC100	ARM CORTEX-A8 (S5PC100 SoC)
+
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2	ARM926EJS
@@ -630,17 +634,17 @@ Sergey Kubushyn <ksi@koi8.net>
 	SONATA		ARM926EJS
 	SCHMOOGIE	ARM926EJS
 
-Sandeep Paulraj <s-paulraj@ti.com>
-
-	davinci_dm355evm	ARM926EJS
-	davinci_dm355leopard	ARM926EJS
-	davinci_dm365evm	ARM926EJS
-	davinci_dm6467evm	ARM926EJS
-
 Prakash Kumar <prakash@embedx.com>
 
 	cerf250		xscale
 
+Vipin Kumar <vipin.kumar@st.com>
+
+	spear300	ARM926EJS (spear300 Soc)
+	spear310	ARM926EJS (spear310 Soc)
+	spear320	ARM926EJS (spear320 Soc)
+	spear600	ARM926EJS (spear600 Soc)
+
 Sergey Lapin <slapin@ossfans.org>
 
 	afeb9260	ARM926EJS (AT91SAM9260 SoC)
@@ -673,6 +677,13 @@ Kyungmin Park <kyungmin.park@samsung.com>
 
 	apollon		ARM1136EJS
 
+Sandeep Paulraj <s-paulraj@ti.com>
+
+	davinci_dm355evm	ARM926EJS
+	davinci_dm355leopard	ARM926EJS
+	davinci_dm365evm	ARM926EJS
+	davinci_dm6467evm	ARM926EJS
+
 Peter Pearse <peter.pearse@arm.com>
 	integratorcp	All current ARM supplied & supported core modules
 			-see http://www.arm.com/products/DevTools/Hardware_Platforms.html
@@ -773,10 +784,6 @@ Alex Züpke <azu@sysgo.de>
 	lart		SA1100
 	dnp1110		SA1110
 
-Minkyu Kang <mk7.kang@samsung.com>
-
-	SMDKC100	ARM CORTEX-A8 (S5PC100 SoC)
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
index 518944e077..9bb56b5208 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -132,9 +132,7 @@ int board_eth_init(bd_t *bis)
 #ifdef CONFIG_SMC91111
 	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
 #endif
-#ifdef CONFIG_PCI
 	rc += pci_eth_init(bis);
-#endif
 	return rc;
 }
 #endif
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index 15a1a27c36..fb466c6ece 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -23,10 +23,40 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
+#include <asm/arch/smc.h>
+#include <asm/arch/gpio.h>
+#include <netdev.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+static void smc9115_pre_init(void)
+{
+	u32 smc_bw_conf, smc_bc_conf;
+
+	struct s5pc100_gpio *const gpio =
+		(struct s5pc100_gpio *)S5PC100_GPIO_BASE;
+
+	/* gpio configuration GPK0CON */
+	gpio_cfg_pin(&gpio->gpio_k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+
+	/* Ethernet needs bus width of 16 bits */
+	smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
+	smc_bc_conf = SMC_BC_TACS(0x0) | SMC_BC_TCOS(0x4) | SMC_BC_TACC(0xe)
+			| SMC_BC_TCOH(0x1) | SMC_BC_TAH(0x4)
+			| SMC_BC_TACP(0x6) | SMC_BC_PMC(0x0);
+
+	/* Select and configure the SROMC bank */
+	s5pc1xx_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
+}
+
 int board_init(void)
 {
+	smc9115_pre_init();
+
 	gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
@@ -49,3 +79,12 @@ int checkboard(void)
 	return 0;
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_SMC911X
+	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+	return rc;
+}
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
index 2c0014f2bd..befa0cdcc4 100644
--- a/cpu/arm1176/cpu.c
+++ b/cpu/arm1176/cpu.c
@@ -33,7 +33,9 @@
 
 #include <common.h>
 #include <command.h>
+#ifdef CONFIG_S3C64XX
 #include <asm/arch/s3c6400.h>
+#endif
 #include <asm/system.h>
 
 static void cache_flush (void);
diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S
index 68a356d13e..e2b6c9b08d 100644
--- a/cpu/arm1176/start.S
+++ b/cpu/arm1176/start.S
@@ -35,7 +35,9 @@
 #ifdef CONFIG_ENABLE_MMU
 #include <asm/proc/domain.h>
 #endif
+#ifdef CONFIG_S3C64XX
 #include <asm/arch/s3c6400.h>
+#endif
 
 #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
 #define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
@@ -190,10 +192,12 @@ mmu_disable:
 #endif
 
 mmu_disable_phys:
+#ifdef CONFIG_S3C64XX
 	/* Peri port setup */
 	ldr	r0, =0x70000000
 	orr	r0, r0, #0x13
 	mcr	p15,0,r0,c15,c2,4       @ 256M (0x70000000 - 0x7fffffff)
+#endif
 
 	/*
 	 * Go setup Memory and board specific bits prior to relocation.
diff --git a/cpu/arm920t/ep93xx/timer.c b/cpu/arm920t/ep93xx/timer.c
index 31304b7f97..4a0ce4da64 100644
--- a/cpu/arm920t/ep93xx/timer.c
+++ b/cpu/arm920t/ep93xx/timer.c
@@ -1,8 +1,7 @@
 /*
  * Cirrus Logic EP93xx timer support.
  *
- * Copyright (C) 2009, 2010
- * Matthias Kaehlcke <matthias@kaehlcke.net>
+ * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
  *
  * Copyright (C) 2004, 2005
  * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
@@ -42,17 +41,9 @@
 static struct ep93xx_timer
 {
 	unsigned long long ticks;
-	unsigned long last_update;
+	unsigned long last_read;
 } timer;
 
-static inline unsigned long clk_to_systicks(unsigned long long clk_ticks)
-{
-	unsigned long long sys_ticks = (clk_ticks * CONFIG_SYS_HZ);
-	do_div(sys_ticks, TIMER_FREQ);
-
-	return (unsigned long)sys_ticks;
-}
-
 static inline unsigned long long usecs_to_ticks(unsigned long usecs)
 {
 	unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
@@ -61,11 +52,18 @@ static inline unsigned long long usecs_to_ticks(unsigned long usecs)
 	return ticks;
 }
 
-static inline unsigned long read_timer(void)
+static inline void read_timer(void)
 {
-	struct timer_regs *timer = (struct timer_regs *)TIMER_BASE;
+	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
+	const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
+
+	if (now >= timer.last_read)
+		timer.ticks += now - timer.last_read;
+	else
+		/* an overflow occurred */
+		timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
 
-	return TIMER_MAX_VAL - readl(&timer->timer3.value);
+	timer.last_read = now;
 }
 
 /*
@@ -73,17 +71,14 @@ static inline unsigned long read_timer(void)
  */
 unsigned long long get_ticks(void)
 {
-	const unsigned long now = read_timer();
+	unsigned long long sys_ticks;
 
-	if (now >= timer.last_update)
-		timer.ticks += now - timer.last_update;
-	else
-		/* an overflow occurred */
-		timer.ticks += TIMER_MAX_VAL - timer.last_update + now;
+	read_timer();
 
-	timer.last_update = now;
+	sys_ticks = timer.ticks * CONFIG_SYS_HZ;
+	do_div(sys_ticks, TIMER_FREQ);
 
-	return clk_to_systicks(timer.ticks);
+	return sys_ticks;
 }
 
 unsigned long get_timer_masked(void)
@@ -98,7 +93,7 @@ unsigned long get_timer(unsigned long base)
 
 void reset_timer_masked(void)
 {
-	timer.last_update = read_timer();
+	read_timer();
 	timer.ticks = 0;
 }
 
@@ -109,28 +104,29 @@ void reset_timer(void)
 
 void __udelay(unsigned long usec)
 {
-	/* read the timer and update timer.ticks */
-	get_ticks();
+	unsigned long long target;
+
+	read_timer();
 
-	const unsigned long long target = timer.ticks + usecs_to_ticks(usec);
+	target = timer.ticks + usecs_to_ticks(usec);
 
 	while (timer.ticks < target)
-		get_ticks();
+		read_timer();
 }
 
 int timer_init(void)
 {
-	struct timer_regs *timer = (struct timer_regs *)TIMER_BASE;
+	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
 
-	/* use timer 3 with 508KHz and free running */
-	writel(TIMER_CLKSEL, &timer->timer3.control);
+	/* use timer 3 with 508KHz and free running, not enabled now */
+	writel(TIMER_CLKSEL, &timer_regs->timer3.control);
 
-	/* set initial timer value 3 */
-	writel(TIMER_MAX_VAL, &timer->timer3.load);
+	/* set initial timer value */
+	writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
 
 	/* Enable the timer */
 	writel(TIMER_ENABLE | TIMER_CLKSEL,
-		&timer->timer3.control);
+		&timer_regs->timer3.control);
 
 	reset_timer_masked();
 
diff --git a/cpu/arm926ejs/at91/clock.c b/cpu/arm926ejs/at91/clock.c
index b06d7601b9..ecf91f5187 100644
--- a/cpu/arm926ejs/at91/clock.c
+++ b/cpu/arm926ejs/at91/clock.c
@@ -203,7 +203,8 @@ int at91_clock_init(unsigned long main_clock)
 	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
 		freq /= 2;			/* processor clock division */
 #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
-	mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) == AT91SAM9_PMC_MDIV_3
+	mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
+		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
 		? freq / 3
 		: freq / (1 << ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 8));
 #else
diff --git a/cpu/arm926ejs/nomadik/timer.c b/cpu/arm926ejs/nomadik/timer.c
index 047b9e3513..1d98ef3eb3 100644
--- a/cpu/arm926ejs/nomadik/timer.c
+++ b/cpu/arm926ejs/nomadik/timer.c
@@ -34,8 +34,8 @@
 #define TICKS_PER_HZ		(TIMER_CLOCK / CONFIG_SYS_HZ)
 #define TICKS_TO_HZ(x)		((x) / TICKS_PER_HZ)
 
-/* macro to read the 32 bit timer: since it decrements, we invert read value */
-#define READ_TIMER() (~readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0)))
+/* macro to read the decrementing 32 bit timer as an increasing count */
+#define READ_TIMER() (0 - readl(CONFIG_SYS_TIMERBASE + MTU_VAL(0)))
 
 /* Configure a free-running, auto-wrap counter with no prescaler */
 int timer_init(void)
@@ -49,7 +49,16 @@ int timer_init(void)
 /* Restart counting from 0 */
 void reset_timer(void)
 {
-	writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0)); /* Immediate effect */
+	ulong val;
+	writel(0, CONFIG_SYS_TIMERBASE + MTU_LR(0));
+	/*
+	 * The load-register isn't really immediate: it changes on clock
+	 * edges, so we must wait for our newly-written value to appear.
+	 * Since we might miss reading 0, wait for any change in value.
+	 */
+	val = READ_TIMER();
+	while (READ_TIMER() == val)
+		;
 }
 
 /* Return how many HZ passed since "base" */
diff --git a/cpu/arm_cortexa8/s5pc1xx/Makefile b/cpu/arm_cortexa8/s5pc1xx/Makefile
index 4f922e686a..01c93feda8 100644
--- a/cpu/arm_cortexa8/s5pc1xx/Makefile
+++ b/cpu/arm_cortexa8/s5pc1xx/Makefile
@@ -33,6 +33,8 @@ SOBJS	+= reset.o
 
 COBJS	+= clock.o
 COBJS	+= cpu_info.o
+COBJS	+= gpio.o
+COBJS	+= sromc.o
 COBJS	+= timer.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm_cortexa8/s5pc1xx/clock.c b/cpu/arm_cortexa8/s5pc1xx/clock.c
index a9e78dd793..19619f92cd 100644
--- a/cpu/arm_cortexa8/s5pc1xx/clock.c
+++ b/cpu/arm_cortexa8/s5pc1xx/clock.c
@@ -25,12 +25,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
-
-#define APLL	0
-#define MPLL	1
-#define EPLL	2
-#define HPLL	3
-#define VPLL	4
+#include <asm/arch/clk.h>
 
 #define CLK_M	0
 #define CLK_D	1
diff --git a/cpu/arm_cortexa8/s5pc1xx/gpio.c b/cpu/arm_cortexa8/s5pc1xx/gpio.c
new file mode 100644
index 0000000000..a97244bf30
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/gpio.c
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2009 Samsung Electronics
+ * Minkyu Kang <mk7.kang@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/gpio.h>
+
+#define CON_MASK(x)		(0xf << ((x) << 2))
+#define CON_SFR(x, v)		((v) << ((x) << 2))
+
+#define DAT_MASK(x)		(0x1 << (x))
+#define DAT_SET(x)		(0x1 << (x))
+
+#define PULL_MASK(x)		(0x3 << ((x) << 1))
+#define PULL_MODE(x, v)		((v) << ((x) << 1))
+
+#define DRV_MASK(x)		(0x3 << ((x) << 1))
+#define DRV_SET(x, m)		((m) << ((x) << 1))
+#define RATE_MASK(x)		(0x1 << (x + 16))
+#define RATE_SET(x)		(0x1 << (x + 16))
+
+void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg)
+{
+	unsigned int value;
+
+	value = readl(&bank->con);
+	value &= ~CON_MASK(gpio);
+	value |= CON_SFR(gpio, cfg);
+	writel(value, &bank->con);
+}
+
+void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+{
+	unsigned int value;
+
+	gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
+
+	value = readl(&bank->dat);
+	value &= ~DAT_MASK(gpio);
+	if (en)
+		value |= DAT_SET(gpio);
+	writel(value, &bank->dat);
+}
+
+void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio)
+{
+	gpio_cfg_pin(bank, gpio, GPIO_INPUT);
+}
+
+void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+{
+	unsigned int value;
+
+	value = readl(&bank->dat);
+	value &= ~DAT_MASK(gpio);
+	if (en)
+		value |= DAT_SET(gpio);
+	writel(value, &bank->dat);
+}
+
+unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio)
+{
+	unsigned int value;
+
+	value = readl(&bank->dat);
+	return !!(value & DAT_MASK(gpio));
+}
+
+void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+	unsigned int value;
+
+	value = readl(&bank->pull);
+	value &= ~PULL_MASK(gpio);
+
+	switch (mode) {
+	case GPIO_PULL_DOWN:
+	case GPIO_PULL_UP:
+		value |= PULL_MODE(gpio, mode);
+		break;
+	default:
+		return;
+	}
+
+	writel(value, &bank->pull);
+}
+
+void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+	unsigned int value;
+
+	value = readl(&bank->drv);
+	value &= ~DRV_MASK(gpio);
+
+	switch (mode) {
+	case GPIO_DRV_1X:
+	case GPIO_DRV_2X:
+	case GPIO_DRV_3X:
+	case GPIO_DRV_4X:
+		value |= DRV_SET(gpio, mode);
+		break;
+	default:
+		return;
+	}
+
+	writel(value, &bank->drv);
+}
+
+void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+{
+	unsigned int value;
+
+	value = readl(&bank->drv);
+	value &= ~RATE_MASK(gpio);
+
+	switch (mode) {
+	case GPIO_DRV_FAST:
+	case GPIO_DRV_SLOW:
+		value |= RATE_SET(gpio);
+		break;
+	default:
+		return;
+	}
+
+	writel(value, &bank->drv);
+}
diff --git a/cpu/arm_cortexa8/s5pc1xx/sromc.c b/cpu/arm_cortexa8/s5pc1xx/sromc.c
new file mode 100644
index 0000000000..380be81be5
--- /dev/null
+++ b/cpu/arm_cortexa8/s5pc1xx/sromc.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/smc.h>
+
+/*
+ * s5pc1xx_config_sromc() - select the proper SROMC Bank and configure the
+ * 		    band width control and bank control registers
+ * srom_bank	- SROM Bank 0 to 5
+ * smc_bw_conf  - SMC Band witdh reg configuration value
+ * smc_bc_conf  - SMC Bank Control reg configuration value
+ */
+void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf)
+{
+	u32 tmp;
+	struct s5pc1xx_smc *srom;
+
+	if (cpu_is_s5pc100())
+		srom = (struct s5pc1xx_smc *)S5PC100_SROMC_BASE;
+	else
+		srom = (struct s5pc1xx_smc *)S5PC110_SROMC_BASE;
+
+	/* Configure SMC_BW register to handle proper SROMC bank */
+	tmp = srom->bw;
+	tmp &= ~(0xF << (srom_bank * 4));
+	tmp |= smc_bw_conf;
+	srom->bw = tmp;
+
+	/* Configure SMC_BC register */
+	srom->bc[srom_bank] = smc_bc_conf;
+}
diff --git a/doc/README.s5pc1xx b/doc/README.s5pc1xx
index 5a0fe33db1..ab1f02469c 100644
--- a/doc/README.s5pc1xx
+++ b/doc/README.s5pc1xx
@@ -41,7 +41,23 @@ To check SoC:
 		printf("cpu is s5pc110\n");
 
 gpio
-	not supported yet.
+
+	struct s5pc100_gpio *gpio = (struct s5pc100_gpio*)S5PC100_GPIO_BASE;
+
+	/* GPA[0] pin set to irq */
+	gpio_cfg_pin(&gpio->gpio_a, 0, GPIO_IRQ);
+
+	/* GPA[0] pin set to input */
+	gpio_direction_input(&gpio->gpio_a, 0);
+
+	/* GPA[0] pin set to output/high */
+	gpio_direction_output(&gpio->gpio_a, 0, 1);
+
+	/* GPA[0] value set to low */
+	gpio_set_value(&gpio->gpio_a, 0, 0);
+
+	/* get GPA[0] value */
+	value = gpio_get_value(&gpio->gpio_a, 0);
 
 Links
 =====
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 29f3ba186a..b2e03bc58b 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -25,11 +25,6 @@
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
-#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
-#endif
-
 #include <asm/arch/hardware.h>
 #include <asm/arch/io.h>
 #include <asm/arch/at91_pmc.h>
@@ -37,22 +32,23 @@
 
 int usb_cpu_init(void)
 {
+	at91_pmc_t *pmc	= (at91_pmc_t *)AT91_PMC_BASE;
 
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
     defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
     defined(CONFIG_AT91SAM9261)
 	/* Enable PLLB */
-	at91_sys_write(AT91_CKGR_PLLBR, get_pllb_init());
-	while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
+	writel(get_pllb_init(), &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
 		;
 #endif
 
 	/* Enable USB host clock. */
-	at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+	writel(1 << AT91_ID_UHP, &pmc->pcer);
 #ifdef CONFIG_AT91SAM9261
-	at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+	writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
 #else
-	at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+	writel(AT91_PMC_UHP, &pmc->scer);
 #endif
 
 	return 0;
@@ -60,19 +56,21 @@ int usb_cpu_init(void)
 
 int usb_cpu_stop(void)
 {
+	at91_pmc_t *pmc	= (at91_pmc_t *)AT91_PMC_BASE;
+
 	/* Disable USB host clock. */
-	at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+	writel(1 << AT91_ID_UHP, &pmc->pcdr);
 #ifdef CONFIG_AT91SAM9261
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+	writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
 #else
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+	writel(AT91_PMC_UHP, &pmc->scdr);
 #endif
 
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
     defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
 	/* Disable PLLB */
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
-	while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0)
+	writel(0, &pmc->pllbr);
+	while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
 		;
 #endif
 
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index 5bb8b77afc..25afae748d 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -42,11 +42,10 @@
 static int at91_wdt_settimeout(unsigned int timeout)
 {
 	unsigned int reg;
-	unsigned int mr;
+	at91_wdt_t *wd 	= (at91_wdt_t *) AT91_WDT_BASE;
 
 	/* Check if disabled */
-	mr = at91_sys_read(AT91_WDT_MR);
-	if (mr & AT91_WDT_WDDIS) {
+	if (readl(&wd->mr) & AT91_WDT_MR_WDDIS) {
 		printf("sorry, watchdog is disabled\n");
 		return -1;
 	}
@@ -57,19 +56,21 @@ static int at91_wdt_settimeout(unsigned int timeout)
 	 * Since WDV is a 12-bit counter, the maximum period is
 	 * 4096 / 256 = 16 seconds.
 	 */
-	reg = AT91_WDT_WDRSTEN	/* causes watchdog reset */
-		/* | AT91_WDT_WDRPROC	causes processor reset only */
-		| AT91_WDT_WDDBGHLT		/* disabled in debug mode */
-		| AT91_WDT_WDD			/* restart at any time */
-		| (timeout & AT91_WDT_WDV);	/* timer value */
-	at91_sys_write(AT91_WDT_MR, reg);
+
+	reg = AT91_WDT_MR_WDRSTEN		/* causes watchdog reset */
+		| AT91_WDT_MR_WDDBGHLT		/* disabled in debug mode */
+		| AT91_WDT_MR_WDD(0xfff)	/* restart at any time */
+		| AT91_WDT_MR_WDV(timeout);	/* timer value */
+
+	writel(reg, &wd->mr);
 
 	return 0;
 }
 
 void hw_watchdog_reset(void)
 {
-	at91_sys_write(AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT);
+	at91_wdt_t *wd 	= (at91_wdt_t *) AT91_WDT_BASE;
+	writel(AT91_WDT_CR_WDRSTT | AT91_WDT_CR_KEY, &wd->cr);
 }
 
 void hw_watchdog_init(void)
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
index 680fe33270..5b1a85d051 100644
--- a/include/asm-arm/arch-at91/at91_pmc.h
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -108,11 +108,12 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_PCKRDY3		0x00000800
 
 #ifdef CONFIG_AT91_LEGACY
-
 #define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
 #define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
 
 #define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#endif
+
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
@@ -128,27 +129,34 @@ typedef struct at91_pmc {
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
 #define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
 #define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
 
 #define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#endif
+
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
 
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#endif
 #define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
 #define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
 #define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#endif
 #define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
 #define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
 #define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#endif
 #define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
 #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
 #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
@@ -160,7 +168,9 @@ typedef struct at91_pmc {
 #define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
 #define		AT91_PMC_PLLA_WR_ERRATA	(1     << 29)		/* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
 
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#endif
 #define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
 #define			AT91_PMC_CSS_SLOW		(0 << 0)
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
@@ -188,11 +198,13 @@ typedef struct at91_pmc {
 #define			AT91_PMC_PDIV_1			(0 << 12)
 #define			AT91_PMC_PDIV_2			(1 << 12)
 
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
 
 #define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
 #define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
 #define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#endif
 #define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
@@ -203,12 +215,13 @@ typedef struct at91_pmc {
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#ifdef CONFIG_AT91_LEGACY
 #define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
 
 #define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
+#endif
 #define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
-
+#ifdef CONFIG_AT91_LEGACY
 #define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
-
 #endif /* CONFIG_AT91_LEGACY */
 #endif
diff --git a/include/asm-arm/arch-s5pc1xx/clk.h b/include/asm-arm/arch-s5pc1xx/clk.h
index f1aa44fd25..3e59abe78c 100644
--- a/include/asm-arm/arch-s5pc1xx/clk.h
+++ b/include/asm-arm/arch-s5pc1xx/clk.h
@@ -23,6 +23,12 @@
 #ifndef __ASM_ARM_ARCH_CLK_H_
 #define __ASM_ARM_ARCH_CLK_H_
 
+#define APLL	0
+#define MPLL	1
+#define EPLL	2
+#define HPLL	3
+#define VPLL	4
+
 void s5pc1xx_clock_init(void);
 
 extern unsigned long (*get_pll_clk)(int pllreg);
diff --git a/include/asm-arm/arch-s5pc1xx/gpio.h b/include/asm-arm/arch-s5pc1xx/gpio.h
index afbc7ea5ae..8e4bb863f9 100644
--- a/include/asm-arm/arch-s5pc1xx/gpio.h
+++ b/include/asm-arm/arch-s5pc1xx/gpio.h
@@ -124,6 +124,35 @@ struct s5pc110_gpio {
 	struct s5pc1xx_gpio_bank gpio_h2;
 	struct s5pc1xx_gpio_bank gpio_h3;
 };
+
+/* functions */
+void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg);
+void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
+void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio);
+void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
+unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio);
+void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
+void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
+void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
 #endif
 
+/* Pin configurations */
+#define GPIO_INPUT	0x0
+#define GPIO_OUTPUT	0x1
+#define GPIO_IRQ	0xf
+#define GPIO_FUNC(x)	(x)
+
+/* Pull mode */
+#define GPIO_PULL_NONE	0x0
+#define GPIO_PULL_DOWN	0x1
+#define GPIO_PULL_UP	0x2
+
+/* Drive Strength level */
+#define GPIO_DRV_1X	0x0
+#define GPIO_DRV_2X	0x1
+#define GPIO_DRV_3X	0x2
+#define GPIO_DRV_4X	0x3
+#define GPIO_DRV_FAST	0x0
+#define GPIO_DRV_SLOW	0x1
+
 #endif
diff --git a/include/asm-arm/arch-s5pc1xx/smc.h b/include/asm-arm/arch-s5pc1xx/smc.h
new file mode 100644
index 0000000000..88f4ffe33a
--- /dev/null
+++ b/include/asm-arm/arch-s5pc1xx/smc.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2010 Samsung Electronics
+ * Naveen Krishna Ch <ch.naveen@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Note: This file contains the register description for Memory subsystem
+ * 	 (SROM, NAND Flash, OneNand, DDR, OneDRAM) on S5PC1XX.
+ *
+ * 	 Only SROMC is defined as of now
+ */
+
+#ifndef __ASM_ARCH_SMC_H_
+#define __ASM_ARCH_SMC_H_
+
+#define SMC_DATA16_WIDTH(x)    (1<<((x*4)+0))
+#define SMC_BYTE_ADDR_MODE(x)  (1<<((x*4)+1))  /* 0-> Half-word base address*/
+						/* 1-> Byte base address*/
+#define SMC_WAIT_ENABLE(x)     (1<<((x*4)+2))
+#define SMC_BYTE_ENABLE(x)     (1<<((x*4)+3))
+
+#define SMC_BC_TACS(x) (x << 28) /* 0clk     address set-up */
+#define SMC_BC_TCOS(x) (x << 24) /* 4clk     chip selection set-up */
+#define SMC_BC_TACC(x) (x << 16) /* 14clk    access cycle */
+#define SMC_BC_TCOH(x) (x << 12) /* 1clk     chip selection hold */
+#define SMC_BC_TAH(x)  (x << 8)  /* 4clk     address holding time */
+#define SMC_BC_TACP(x) (x << 4)  /* 6clk     page mode access cycle */
+#define SMC_BC_PMC(x)  (x << 0)  /* normal(1data)page mode configuration */
+
+#ifndef __ASSEMBLY__
+struct s5pc1xx_smc {
+	unsigned int	bw;
+	unsigned int	bc[6];
+};
+#endif	/* __ASSEMBLY__ */
+
+/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
+void s5pc1xx_config_sromc(u32 srom_bank, u32 smc_bw_conf, u32 smc_bc_conf);
+
+#endif /* __ASM_ARCH_SMC_H_ */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index d002b97510..e085f4a47c 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -82,7 +82,6 @@
  */
 #include <config_cmd_default.h>
 #undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 4fde012c8f..fb0f576f45 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -131,7 +131,6 @@
  * Command line configuration.
  */
 #include <config_cmd_default.h>
-#undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_IMLS
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index a8ba0528b6..09bce6d0fa 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -83,7 +83,6 @@
 #undef CONFIG_CMD_FLASH
 #undef CONFIG_CMD_IMLS
 #undef CONFIG_CMD_NAND
-#undef CONFIG_CMD_NET
 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_REGINFO
@@ -235,4 +234,15 @@
 
 #define CONFIG_DOS_PARTITION		1
 
+/*
+ * Ethernet Contoller driver
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_SMC911X         1       /* we have a SMC9115 on-board   */
+#define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode          */
+#define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base   */
+#define CONFIG_ENV_SROM_BANK   3       /* Select SROM Bank-3 for Ethernet*/
+#endif /* CONFIG_CMD_NET */
+
 #endif	/* __CONFIG_H */