summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWolfgang Denk <wd@pollux.denx.de>2006-08-18 11:38:05 +0200
committerWolfgang Denk <wd@pollux.denx.de>2006-08-18 11:38:05 +0200
commit4bfb63207765e9048668eb1fe17ac51b02662635 (patch)
treed88516372ae39d18c14597c571a8377857a12ad1
parent0a0f3a46fb5cfa7105402bee9c52dd379325d156 (diff)
parent94568b600acd768f0e1b3c0abe3694963593cf60 (diff)
downloadtalos-obmc-uboot-4bfb63207765e9048668eb1fe17ac51b02662635.tar.gz
talos-obmc-uboot-4bfb63207765e9048668eb1fe17ac51b02662635.zip
Merge with git+ssh://fifi/home/wd/git/u-boot/master
-rw-r--r--CHANGELOG15
-rw-r--r--cpu/i386/sc520.c18
-rw-r--r--cpu/i386/sc520_asm.S54
-rw-r--r--drivers/dm9000x.c3
-rw-r--r--include/common.h2
-rw-r--r--include/fat.h8
-rw-r--r--net/tftp.c2
7 files changed, 91 insertions, 11 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 961e073e4c..ff6eadb1fd 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,21 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Update for SC520 board.
+ Patch by David Updegraff, 02 Dec 2005
+
+* Fixed common.h spelling error.
+ Patch by Cory Tusar, 30 Nov 2005
+
+* Fix typo.
+ Patch by Andreas Engel, 28 Nov 2005
+
+* Fix fatload command on FAT32 formatted partitions.
+ Patch by Joachim Jaeger, 18 Nov 2005
+
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+ Patch by Eric Benard, 17 Nov 2005
+
* Cleanup debug code for yucca board.
* MCC200: restrict addressable flash space to 32 MB
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index c83f0bb6cf..1c4370b081 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -31,7 +31,9 @@
#include <common.h>
#include <config.h>
#include <pci.h>
+#ifdef CONFIG_SC520_SSI
#include <ssi.h>
+#endif
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/ic/sc520.h>
@@ -143,7 +145,15 @@ unsigned long init_sc520_dram(void)
u32 dram_present=0;
u32 dram_ctrl;
-
+#ifdef CFG_SDRAM_DRCTMCTL
+ /* these memory control registers are set up in the assember part,
+ * in sc520_asm.S, during 'mem_init'. If we muck with them here,
+ * after we are running a stack in RAM, we have troubles. Besides,
+ * these refresh and delay values are better ? simply specified
+ * outright in the include/configs/{cfg} file since the HW designer
+ * simply dictates it.
+ */
+#else
int val;
int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
@@ -162,6 +172,7 @@ unsigned long init_sc520_dram(void)
} else {
val = 3; /* 62.4us */
}
+
write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
val = read_mmcr_byte(SC520_DRCTMCTL);
@@ -181,13 +192,12 @@ unsigned long init_sc520_dram(void)
val |= 1;
}
write_mmcr_byte(SC520_DRCTMCTL, val);
-
+#endif
/* We read-back the configuration of the dram
* controller that the assembly code wrote */
dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
-
bd->bi_dram[0].start = 0;
if (dram_ctrl & 0x80) {
/* bank 0 enabled */
@@ -274,7 +284,7 @@ int pci_sc520_set_irq(int pci_pin, int irq)
{
int i;
-# if 0
+# if 1
printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
#endif
if (irq < 0 || irq > 15) {
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 80464fa78b..e1fa37a4a6 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -113,6 +113,7 @@
.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */
.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */
.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */
+.equ ECCINT, 0x0fffefd18 /* DRAM ECC nmi-INT mapping */
.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */
.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */
@@ -459,6 +460,12 @@ emptybank:
incl %edi
loop cleanuplp
+#if defined CFG_SDRAM_DRCTMCTL
+ /* just have your hardware desinger _GIVE_ you what you need here! */
+ movl $DRCTMCTL, %edi
+ movb $CFG_SDRAM_DRCTMCTL,%al
+ movb (%edi), %al
+#else
#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
/* set the CAS latency now since it is hard to do
* when we run from the RAM */
@@ -470,7 +477,8 @@ emptybank:
#ifdef CFG_SDRAM_CAS_LATENCY_3T
orb $0x10, %al
#endif
- movb %al, (%edi)
+ movb %al, (%edi)
+#endif
#endif
movl $DRCCTL, %edi /* DRAM Control register */
movb $0x3,%al /* Load mode register cmd */
@@ -528,9 +536,49 @@ bank0: movl (%edi), %eax
shll $22, %eax
movl %eax, %ebx
-done: movl %ebx, %eax
+done:
+ movl %ebx, %eax
+
+#if CFG_SDRAM_ECC_ENABLE
+ /* A nominal memory test: just a byte at each address line */
+ movl %eax, %ecx
+ shrl $0x1, %ecx
+ movl $0x1, %edi
+memtest0:
+ movb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
+ jne out
+ shrl $1, %ecx
+ andl %ecx,%ecx
+ jz set_ecc
+ shll $1, %edi
+ jmp memtest0
+
+set_ecc:
+ /* clear all ram with a memset */
+ movl %eax, %ecx
+ xorl %esi, %esi
+ xorl %edi, %edi
+ xorl %eax, %eax
+ shrl $2, %ecx
+ cld
+ rep stosl
+ /* enable read, write buffers */
+ movb $0x11, %al
+ movl $DBCTL, %edi
+ movb %al, (%edi)
+ /* enable NMI mapping for ECC */
+ movl $ECCINT, %edi
+ mov $0x10, %al
+ movb %al, (%edi)
+ /* Turn on ECC */
+ movl $ECCCTL, %edi
+ mov $0x05, %al
+ movb %al, (%edi)
+#endif
+out:
+ movl %ebx, %eax
jmp *%ebp
-
#endif /* CONFIG_SC520 */
diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c
index 0e475d4723..687707627e 100644
--- a/drivers/dm9000x.c
+++ b/drivers/dm9000x.c
@@ -436,6 +436,9 @@ eth_rx(void)
u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
u16 RxStatus, RxLen = 0;
u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+ u32 tmpdata;
+#endif
/* Check packet ready or not */
DM9000_ior(DM9000_MRCMDX); /* Dummy read */
diff --git a/include/common.h b/include/common.h
index bd41ae179a..9a19001c18 100644
--- a/include/common.h
+++ b/include/common.h
@@ -603,7 +603,7 @@ void show_boot_progress (int status);
#endif
#ifdef CONFIG_INIT_CRITICAL
-#error CONFIG_INIT_CRITICAL is depracted!
+#error CONFIG_INIT_CRITICAL is deprecated!
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
diff --git a/include/fat.h b/include/fat.h
index 0645458f17..92638d535e 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -175,15 +175,19 @@ typedef struct dir_slot {
__u8 name11_12[4]; /* Last 2 characters in name */
} dir_slot;
-/* Private filesystem parameters */
+/* Private filesystem parameters
+ *
+ * Note: FAT buffer has to be 32 bit aligned
+ * (see FAT32 accesses)
+ */
typedef struct {
+ __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */
int fatsize; /* Size of FAT in bits */
__u16 fatlength; /* Length of FAT in sectors */
__u16 fat_sect; /* Starting sector of the FAT */
__u16 rootdir_sect; /* Start sector of root directory */
__u16 clust_size; /* Size of clusters in sectors */
short data_begin; /* The sector of the first cluster, can be negative */
- __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */
int fatbufnum; /* Used by get_fatent, init to -1 */
} fsdata;
diff --git a/net/tftp.c b/net/tftp.c
index eca21d294e..f3a5471483 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -225,7 +225,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
if (TftpBlock == 0) {
TftpBlockWrap++;
TftpBlockWrapOffset += TFTP_BLOCK_SIZE * TFTP_SEQUENCE_SIZE;
- printf ("\n\t %lu MB reveived\n\t ", TftpBlockWrapOffset>>20);
+ printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20);
} else {
if (((TftpBlock - 1) % 10) == 0) {
putc ('#');
OpenPOWER on IntegriCloud