malta: Allow MIPS64 builds

Both real Malta boards & emulators that mimic Malta (eg. QEMU) can
support MIPS64 CPUs. Allow MIPS64 builds of U-Boot for such boards,
which enables the user to make use of the whole 64 bit address space.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>

4 files changed, 25 insertions, 12 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 53363e38fe..abaeaf0330 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -33,6 +33,9 @@ config TARGET_MALTA
 	select SUPPORTS_CPU_MIPS32_R1
 	select SUPPORTS_CPU_MIPS32_R2
 	select SUPPORTS_CPU_MIPS32_R6
+	select SUPPORTS_CPU_MIPS64_R1
+	select SUPPORTS_CPU_MIPS64_R2
+	select SUPPORTS_CPU_MIPS64_R6
 	select SWAP_IO_SPACE
 	select MIPS_L1_CACHE_SHIFT_6
 
diff --git a/board/imgtec/malta/Kconfig b/board/imgtec/malta/Kconfig
index 2bb8e8be16..98eb4d16c7 100644
--- a/board/imgtec/malta/Kconfig
+++ b/board/imgtec/malta/Kconfig
@@ -10,6 +10,7 @@ config SYS_CONFIG_NAME
 	default "malta"
 
 config SYS_TEXT_BASE
-	default 0xbe000000
+	default 0xbe000000 if 32BIT
+	default 0xffffffffbe000000 if 64BIT
 
 endif
diff --git a/board/imgtec/malta/lowlevel_init.S b/board/imgtec/malta/lowlevel_init.S
index 534db1d832..3d48cdc1f4 100644
--- a/board/imgtec/malta/lowlevel_init.S
+++ b/board/imgtec/malta/lowlevel_init.S
@@ -10,6 +10,7 @@
 #include <pci.h>
 
 #include <asm/addrspace.h>
+#include <asm/asm.h>
 #include <asm/regdef.h>
 #include <asm/malta.h>
 #include <asm/mipsregs.h>
@@ -34,7 +35,7 @@ lowlevel_init:
 	mtc0	t0, CP0_CONFIG, 2
 
 	/* detect the core card */
-	li	t0, KSEG1ADDR(MALTA_REVISION)
+	PTR_LI	t0, CKSEG1ADDR(MALTA_REVISION)
 	lw	t0, 0(t0)
 	srl	t0, t0, MALTA_REVISION_CORID_SHF
 	andi	t0, t0, (MALTA_REVISION_CORID_MSK >> \
@@ -68,12 +69,12 @@ lowlevel_init:
 	 */
 _gt64120:
 	/* move GT64120 registers from 0x14000000 to 0x1be00000 */
-	li	t1, KSEG1ADDR(GT_DEF_BASE)
+	PTR_LI	t1, CKSEG1ADDR(GT_DEF_BASE)
 	li	t0, CPU_TO_GT32(0xdf000000)
 	sw	t0, GT_ISD_OFS(t1)
 
 	/* setup MEM-to-PCI0 mapping */
-	li	t1, KSEG1ADDR(MALTA_GT_BASE)
+	PTR_LI	t1, CKSEG1ADDR(MALTA_GT_BASE)
 
 	/* setup PCI0 io window to 0x18000000-0x181fffff */
 	li	t0, CPU_TO_GT32(0xc0000000)
@@ -100,7 +101,7 @@ _gt64120:
 	 */
 _msc01:
 	/* setup peripheral bus controller clock divide */
-	li	t0, KSEG1ADDR(MALTA_MSC01_PBC_BASE)
+	PTR_LI	t0, CKSEG1ADDR(MALTA_MSC01_PBC_BASE)
 	li	t1, 0x1 << MSC01_PBC_CLKCFG_SHF
 	sw	t1, MSC01_PBC_CLKCFG_OFS(t0)
 
@@ -122,7 +123,7 @@ _msc01:
 	sw	t1, MSC01_PBC_CS0CFG_OFS(t0)
 
 	/* setup basic address decode */
-	li	t0, KSEG1ADDR(MALTA_MSC01_BIU_BASE)
+	PTR_LI	t0, CKSEG1ADDR(MALTA_MSC01_BIU_BASE)
 	li	t1, 0x0
 	li	t2, -CONFIG_SYS_MEM_SIZE
 	sw	t1, MSC01_BIU_MCBAS1L_OFS(t0)
@@ -157,7 +158,7 @@ _msc01:
 	sw	t2, MSC01_BIU_IP3MSK2L_OFS(t0)
 
 	/* setup PCI memory */
-	li	t0, KSEG1ADDR(MALTA_MSC01_PCI_BASE)
+	PTR_LI	t0, CKSEG1ADDR(MALTA_MSC01_PCI_BASE)
 	li	t1, MALTA_MSC01_PCIMEM_BASE
 	li	t2, (-MALTA_MSC01_PCIMEM_SIZE) & MSC01_PCI_SC2PMMSKL_MSK_MSK
 	li	t3, MALTA_MSC01_PCIMEM_MAP
diff --git a/include/configs/malta.h b/include/configs/malta.h
index a36967848c..fc4baba7d7 100644
--- a/include/configs/malta.h
+++ b/include/configs/malta.h
@@ -39,14 +39,18 @@
  */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_SDRAM_BASE		0x80000000 /* Cached addr */
+#ifdef CONFIG_64BIT
+# define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
+#else
+# define CONFIG_SYS_SDRAM_BASE		0x80000000
+#endif
 #define CONFIG_SYS_MEM_SIZE		(256 * 1024 * 1024)
 
 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
-#define CONFIG_SYS_LOAD_ADDR		0x81000000
-#define CONFIG_SYS_MEMTEST_START	0x80100000
-#define CONFIG_SYS_MEMTEST_END		0x80800000
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x00100000)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x00800000)
 
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)
 #define CONFIG_SYS_BOOTPARAMS_LEN	(128 * 1024)
@@ -69,7 +73,11 @@
 /*
  * Flash configuration
  */
-#define CONFIG_SYS_FLASH_BASE		0xbe000000
+#ifdef CONFIG_64BIT
+# define CONFIG_SYS_FLASH_BASE		0xffffffffbe000000
+#else
+# define CONFIG_SYS_FLASH_BASE		0xbe000000
+#endif
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	128
 #define CONFIG_SYS_FLASH_CFI