blob: 112756e11802c7ccfbaccca4462e0987f88e0053 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
* Rockchip Power Domains
Rockchip processors include support for multiple power domains which can be
powered up/down by software based on different application scenes to save power.
Required properties for power domain controller:
- compatible: Should be one of the following.
"rockchip,rk3288-power-controller" - for RK3288 SoCs.
- #power-domain-cells: Number of cells in a power-domain specifier.
Should be 1 for multiple PM domains.
- #address-cells: Should be 1.
- #size-cells: Should be 0.
Required properties for power domain sub nodes:
- reg: index of the power domain, should use macros in:
"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
- clocks (optional): phandles to clocks which need to be enabled while power domain
switches state.
Example:
power: power-controller {
compatible = "rockchip,rk3288-power-controller";
#power-domain-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
pd_gpu {
reg = <RK3288_PD_GPU>;
clocks = <&cru ACLK_GPU>;
};
};
Node of a device using power domains must have a power-domains property,
containing a phandle to the power device node and an index specifying which
power domain to use.
The index should use macros in:
"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
Example of the node using power domain:
node {
/* ... */
power-domains = <&power RK3288_PD_GPU>;
/* ... */
};
|
