summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/drm_fb_helper.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/fb-helper: fix leaks in error path of drm_fb_helper_fbdev_setupPeter Wu2019-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 00eb5b0da8d27b3c944bfc959c3344d665caae26 ] After drm_fb_helper_fbdev_setup calls drm_fb_helper_init, "dev->fb_helper" will be initialized (and thus drm_fb_helper_fini will have some effect). After that, drm_fb_helper_initial_config is called which may call the "fb_probe" driver callback. This driver callback may call drm_fb_helper_defio_init (as is done by drm_fb_helper_generic_probe) or set a framebuffer (as is done by bochs) as documented. These are normally cleaned up on exit by drm_fb_helper_fbdev_teardown which also calls drm_fb_helper_fini. If an error occurs after "fb_probe", but before setup is complete, then calling just drm_fb_helper_fini will leak resources. This was triggered by df2052cc922 ("bochs: convert to drm_fb_helper_fbdev_setup/teardown"): [ 50.008030] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer [ 50.009436] bochs-drm 0000:00:02.0: [drm:drm_fb_helper_fbdev_setup] *ERROR* fbdev: Failed to set configuration (ret=-38) [ 50.011456] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 2 [ 50.013604] WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x280/0x2a0 [ 50.016175] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 4.20.0-rc7 #1 [ 50.017732] EIP: drm_mode_config_cleanup+0x280/0x2a0 ... [ 50.023155] Call Trace: [ 50.023155] ? bochs_kms_fini+0x1e/0x30 [ 50.023155] ? bochs_unload+0x18/0x40 This can be reproduced with QEMU and CONFIG_FB_LITTLE_ENDIAN=n. Link: https://lkml.kernel.org/r/20181221083226.GI23332@shao2-debian Link: https://lkml.kernel.org/r/20181223004315.GA11455@al Fixes: 8741216396b2 ("drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()") Reported-by: kernel test robot <rong.a.chen@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181223005507.28328-1-peter@lekensteyn.nl Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/fb-helper: generic: Fix drm_fbdev_client_restore()Noralf Trønnes2019-03-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 78de14c23e031420aa5f61973583635eccd6cd2a upstream. If fbdev setup has failed, lastclose will give a NULL pointer deref: [ 77.794295] [drm:drm_lastclose] [ 77.794414] [drm:drm_lastclose] driver lastclose completed [ 77.794660] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 77.809460] pgd = b376b71b [ 77.818275] [00000014] *pgd=175ba831, *pte=00000000, *ppte=00000000 [ 77.830813] Internal error: Oops: 17 [#1] ARM [ 77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core [ 77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G C 5.0.0-rc1+ #1 [ 77.879525] Hardware name: BCM2835 [ 77.889185] PC is at restore_fbdev_mode+0x20/0x164 [ 77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c [ 78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14) [ 78.291030] Backtrace: [ 78.300815] [<c04f2d0c>] (restore_fbdev_mode) from [<c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c) [ 78.319095] r9:d8a8a288 r8:d891acf0 r7:d7697910 r6:00000000 r5:d891ac00 r4:d891ac00 [ 78.334432] [<c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c04f47e8>] (drm_fbdev_client_restore+0x18/0x20) [ 78.353296] r8:d76978c0 r7:d7697910 r6:d7697950 r5:d7697800 r4:d891ac00 r3:c04f47d0 [ 78.368689] [<c04f47d0>] (drm_fbdev_client_restore) from [<c051b6b4>] (drm_client_dev_restore+0x7c/0xc0) [ 78.385982] [<c051b638>] (drm_client_dev_restore) from [<c04f8fd0>] (drm_lastclose+0xc4/0xd4) [ 78.402332] r8:d76978c0 r7:d7471080 r6:c0e0c088 r5:d8a85e00 r4:d7697800 [ 78.416688] [<c04f8f0c>] (drm_lastclose) from [<c04f9088>] (drm_release+0xa8/0x10c) [ 78.431929] r5:d8a85e00 r4:d7697800 [ 78.442989] [<c04f8fe0>] (drm_release) from [<c02640c4>] (__fput+0x104/0x1c8) [ 78.457740] r8:d5ccea10 r7:d96cfb10 r6:00000008 r5:d74c1b90 r4:d8a8a280 [ 78.472043] [<c0263fc0>] (__fput) from [<c02641ec>] (____fput+0x18/0x1c) [ 78.486363] r10:00000006 r9:d7722000 r8:c01011c4 r7:00000000 r6:c0ebac6c r5:d892a340 [ 78.501869] r4:d8a8a280 [ 78.512002] [<c02641d4>] (____fput) from [<c013ef1c>] (task_work_run+0x98/0xac) [ 78.527186] [<c013ee84>] (task_work_run) from [<c010cc54>] (do_work_pending+0x4f8/0x570) [ 78.543238] r7:d7722030 r6:00000004 r5:d7723fb0 r4:00000000 [ 78.556825] [<c010c75c>] (do_work_pending) from [<c0101034>] (slow_work_pending+0xc/0x20) [ 78.674256] ---[ end trace 70d3a60cf739be3b ]--- Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use. Fixes: 9060d7f49376 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190125150300.33268-1-noralf@tronnes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclockIvan Mironov2019-01-101-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Strict requirement of pixclock to be zero breaks support of SDL 1.2 which contains hardcoded table of supported video modes with non-zero pixclock values[1]. To better understand which pixclock values are considered valid and how driver should handle these values, I briefly examined few existing fbdev drivers and documentation in Documentation/fb/. And it looks like there are no strict rules on that and actual behaviour varies: * some drivers treat (pixclock == 0) as "use defaults" (uvesafb.c); * some treat (pixclock == 0) as invalid value which leads to -EINVAL (clps711x-fb.c); * some pass converted pixclock value to hardware (uvesafb.c); * some are trying to find nearest value from predefined table (vga16fb.c, video_gx.c). Given this, I believe that it should be safe to just ignore this value if changing is not supported. It seems that any portable fbdev application which was not written only for one specific device working under one specific kernel version should not rely on any particular behaviour of pixclock anyway. However, while enabling SDL1 applications to work out of the box when there is no /etc/fb.modes with valid settings, this change affects the video mode choosing logic in SDL. Depending on current screen resolution, contents of /etc/fb.modes and resolution requested by application, this may lead to user-visible difference (not always): image will be displayed in a right way, but it will be aligned to the left instead of center. There is no "right behaviour" here as well, as emulated fbdev, opposing to old fbdev drivers, simply ignores any requsts of video mode changes with resolutions smaller than current. The easiest way to reproduce this problem is to install sdl-sopwith[2], remove /etc/fb.modes file if it exists, and then try to run sopwith from console without X. At least in Fedora 29, sopwith may be simply installed from standard repositories. [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, vesa_timings [2] http://sdl-sopwith.sourceforge.net/ Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Cc: stable@vger.kernel.org Fixes: 79e539453b34e ("DRM: i915: add mode setting support") Fixes: 771fe6b912fca ("drm/radeon: introduce kernel modesetting for radeon hardware") Fixes: 785b93ef8c309 ("drm/kms: move driver specific fb common code to helper functions (v2)") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-3-mironov.ivan@gmail.com
* drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2Ivan Mironov2019-01-101-53/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SDL 1.2 sets all fields related to the pixel format to zero in some cases[1]. Prior to commit db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests"), there was an unintentional workaround for this that existed for more than a decade. First in device-specific DRM drivers, then here in drm_fb_helper.c. Previous code containing this workaround just ignores pixel format fields from userspace code. Not a good thing either, as this way, driver may silently use pixel format different from what client actually requested, and this in turn will lead to displaying garbage on the screen. I think that returning EINVAL to userspace in this particular case is the right option, so I decided to left code from problematic commit untouched instead of just reverting it entirely. Here is the steps required to reproduce this problem exactly: 1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL support. SDL should be compiled with fbdev support (which is on by default). 2) Create /etc/fb.modes with following contents (values seems not used, and just required to trigger problematic code in SDL): mode "test" geometry 1 1 1 1 1 timings 1 1 1 1 1 1 1 endmode 3) Create ~/.fceux/fceux.cfg with following contents: SDL.Hotkeys.Quit = 27 SDL.DoubleBuffering = 1 4) Ensure that screen resolution is at least 1280x960 (e.g. append "video=Virtual-1:1280x960-32" to the kernel cmdline for qemu/QXL). 5) Try to run fceux on VT with some ROM file[3]: # ./fceux color_test.nes [1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c, FB_SetVideoMode() [2] http://www.fceux.com [3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes Reported-by: saahriktu <mail@saahriktu.org> Suggested-by: saahriktu <mail@saahriktu.org> Cc: stable@vger.kernel.org Fixes: db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests") Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> [danvet: Delete misleading comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
* Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2018-12-251-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
| * Merge v4.20-rc4 into drm-nextDave Airlie2018-11-291-0/+3
| |\ | | | | | | | | | | | | | | | Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * \ Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie2018-11-191-0/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
| | * | drm/fourcc: Add char_per_block, block_w and block_h in drm_format_infoAlexandru Gheorghe2018-11-021-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some pixel formats .cpp structure in drm_format info it's not enough to describe the peculiarities of the pixel layout, for example tiled formats or packed formats at bit level. What's implemented here is to add three new members to drm_format_info that could describe such formats: - char_per_block[3] - block_w[3] - block_h[3] char_per_block will be put in a union alongside cpp, for transparent compatibility with the existing format descriptions. Regarding, block_w and block_h they are intended to be used through their equivalent getters drm_format_info_block_width / drm_format_info_block_height, the reason of the getters is to abstract the fact that for normal formats block_w and block_h will be unset/0, but the methods will be returning 1. Additionally, convenience function drm_format_info_min_pitch had been added that computes the minimum required pitch for a given pixel format and buffer width. Using that the following drm core functions had been updated to generically handle both block and non-block formats: - drm_fb_cma_get_gem_addr: for block formats it will just return the beginning of the block. - framebuffer_check: Use the newly added drm_format_info_min_pitch. - drm_gem_fb_create_with_funcs: Use the newly added drm_format_info_min_pitch. - In places where is not expecting to handle block formats, like fbdev helpers I just added some warnings in case the block width/height are greater than 1. Changes since v3: - Add helper function for computing the minimum required pitch. - Improve/cleanup documentation Changes since v8: - Fixed build on 32bits arm architectures, with: - return DIV_ROUND_UP((u64)buffer_width * info->char_per_block[plane], + return DIV_ROUND_UP_ULL((u64)buffer_width * info->char_per_block[plane], Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101170055.5433-1-alexandru-cosmin.gheorghe@arm.com
* | | | drm/fb-helper: Fix typo in parameter descriptionWei Yongjun2018-12-041-1/+1
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | Fix typo in parameter description. Fixes: 4be9bd10e22d ("drm/fb_helper: Allow leaking fbdev smem_start") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1543905135-35293-1-git-send-email-weiyongjun1@huawei.com
* | | drm/fb-helper: Blacklist writeback when adding connectors to fbdevPaul Kocialkowski2018-11-211-0/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writeback connectors do not produce any on-screen output and require special care for use. Such connectors are hidden from enumeration in DRM resources by default, but they are still picked-up by fbdev. This makes rather little sense since fbdev is not really adapted for dealing with writeback. Moreover, this is also a source of issues when userspace disables the CRTC (and associated plane) without detaching the CRTC from the connector (which is hidden by default). In this case, the connector is still using the CRTC, leading to am "enabled/connectors mismatch" and eventually the failure of the associated atomic commit. This situation happens with VC4 testing under IGT GPU Tools. Filter out writeback connectors in the fbdev helper to solve this. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Fixes: 935774cd71fe ("drm: Add writeback connector type") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181115163248.21168-1-paul.kocialkowski@bootlin.com
* | Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2018-10-281-10/+53
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
| * drm/fb_helper: Allow leaking fbdev smem_startNeil Armstrong2018-10-031-2/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com
| * Merge drm/drm-next into drm-misc-nextSean Paul2018-09-271-3/+0
| |\ | | | | | | | | | | | | | | | Backmerging 4.19-rc5 to pick up sun4i fix Signed-off-by: Sean Paul <seanpaul@chromium.org>
| | * BackMerge v4.19-rc5 into drm-nextDave Airlie2018-09-271-3/+0
| | |\ | | | | | | | | | | | | | | | | | | | | Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | drm/fb-helper: Improve error reporting in setupNoralf Trønnes2018-09-251-4/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve error reporting in drm_fb_helper_fbdev_setup() by printing the error code. This is useful for drivers that choose to not fall over just because fbdev doesen't work, but still wants clues to why it failed. This way they don't have to provide an error message themselves. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-2-noralf@tronnes.org
| * | drm/fb: Stop leaking physical addressDaniel Vetter2018-09-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For buffer sharing, use dma-buf instead. We can't set smem_start to 0 unconditionally since that's used by the fbdev mmap default implementation. And we have plenty of userspace which would like to keep that working. This might break legit userspace - if it does we need to look at a case-by-cases basis how to handle that. Worst case I expect overrides for only specific drivers, since anything remotely modern should be using dma-buf/prime now (which is about 7 years old now for DRM drivers). This issue was uncovered because Noralf's rework to implement a generic fb_probe also implements it's own fb_mmap callback. Which means smem_start didn't have to be set anymore, which blew up some blob in userspace rather badly. Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: John Stultz <john.stultz@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
| * | drm/fb-helper: improve documentation and print warningsPeter Wu2018-09-101-6/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify requirements for the new generic fbdev emulation API and log some more details in case the driver does something wrong. Fix related typos. Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-5-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* | | drm: fb-helper: Reject all pixel format changing requestsEugeniy Paltsev2018-10-041-65/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm fbdev emulation doesn't support changing the pixel format at all, so reject all pixel format changing requests. Cc: stable@vger.kernel.org Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181003164538.5534-1-Eugeniy.Paltsev@synopsys.com
* | | drm/cma-helper: Fix crash in fbdev error pathNoralf Trønnes2018-10-021-1/+3
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sergey Suloev reported a crash happening in drm_client_dev_hotplug() when fbdev had failed to register. [ 9.124598] vc4_hdmi 3f902000.hdmi: ASoC: Failed to create component debugfs directory [ 9.147667] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok [ 9.155184] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name! [ 9.166544] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.173840] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4]) [ 9.181029] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4]) [ 9.188519] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.195690] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.203523] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.215032] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.274785] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4]) [ 9.290246] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0 [ 9.297464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 9.304600] [drm] Driver supports precise vblank timestamp query. [ 9.382856] vc4-drm soc:gpu: [drm:drm_fb_helper_fbdev_setup [drm_kms_helper]] *ERROR* Failed to set fbdev configuration [ 10.404937] Unable to handle kernel paging request at virtual address 00330a656369768a [ 10.441620] [00330a656369768a] address between user and kernel address ranges [ 10.449087] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 10.454762] Modules linked in: brcmfmac vc4 drm_kms_helper cfg80211 drm rfkill smsc95xx brcmutil usbnet drm_panel_orientation_quirks raspberrypi_hwmon bcm2835_dma crc32_ce pwm_bcm2835 bcm2835_rng virt_dma rng_core i2c_bcm2835 ip_tables x_tables ipv6 [ 10.477296] CPU: 2 PID: 45 Comm: kworker/2:1 Not tainted 4.19.0-rc5 #3 [ 10.483934] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 10.489966] Workqueue: events output_poll_execute [drm_kms_helper] [ 10.596515] Process kworker/2:1 (pid: 45, stack limit = 0x000000007e8924dc) [ 10.603590] Call trace: [ 10.606259] drm_client_dev_hotplug+0x5c/0xb0 [drm] [ 10.611303] drm_kms_helper_hotplug_event+0x30/0x40 [drm_kms_helper] [ 10.617849] output_poll_execute+0xc4/0x1e0 [drm_kms_helper] [ 10.623616] process_one_work+0x1c8/0x318 [ 10.627695] worker_thread+0x48/0x428 [ 10.631420] kthread+0xf8/0x128 [ 10.634615] ret_from_fork+0x10/0x18 [ 10.638255] Code: 54000220 f9401261 aa1303e0 b4000141 (f9400c21) [ 10.644456] ---[ end trace c75b4a4b0e141908 ]--- The reason for this is that drm_fbdev_cma_init() removes the drm_client when fbdev registration fails, but it doesn't remove the client from the drm_device client list. So the client list now has a pointer that points into the unknown and we have a 'use after free' situation. Split drm_client_new() into drm_client_init() and drm_client_add() to fix removal in the error path. Fixes: 894a677f4b3e ("drm/cma-helper: Use the generic fbdev emulation") Reported-by: Sergey Suloev <ssuloev@orpaltech.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Eric Anholt <eric@anholt.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181001194536.57756-1-noralf@tronnes.org
* | drm/fb-helper: Remove set but not used variable 'connector_funcs'YueHaibing2018-09-121-3/+0
|/ | | | | | | | | | | | Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_fb_helper.c: In function 'drm_pick_crtcs': drivers/gpu/drm/drm_fb_helper.c:2373:43: warning: variable 'connector_funcs' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1536722130-108819-1-git-send-email-yuehaibing@huawei.com
* drm/fb-helper: Finish the generic fbdev emulationNoralf Trønnes2018-07-101-0/+117
| | | | | | | | | | This adds a drm_fbdev_generic_setup() function that sets up generic fbdev emulation with client callbacks for restore, hotplug and unregister. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-7-noralf@tronnes.org
* drm/fb-helper: Add generic fbdev emulation .fb_probe functionNoralf Trønnes2018-07-101-1/+198
| | | | | | | | | | This is the first step in getting generic fbdev emulation. A drm_fb_helper_funcs.fb_probe function is added which uses the DRM client API to get a framebuffer backed by a dumb buffer. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-3-noralf@tronnes.org
* drm: Add drm_connector_for_each_possible_encoder()Ville Syrjälä2018-07-051-9/+2
| | | | | | | | | | | | | | | | | | | | | | Add a convenience macro for iterating connector->encoder_ids[]. Isolates the users from the implementation details. Note that we don't seem to pass the file_priv down to drm_encoder_find() because encoders apparently don't get leased. No idea why drm_encoder_finc() even takes the file_priv actually. Also use ARRAY_SIZE() when populating the array to avoid spreading knowledge about the array size all over. v2: Hide the drm_encoder_find() in the macro, and rename the macro appropriately (Daniel) v3: Fix kernel docs (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-4-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/fb-helper: Eliminate the .best_encoder() usageVille Syrjälä2018-07-051-17/+24
| | | | | | | | | | | | | | | | | | | Instead of using the .best_encoder() hook to figure out whether a given connector+crtc combo will work, let's instead do what userspace does and just iterate over all the encoders for the connector, and then check each crtc against each encoder's possible_crtcs bitmask. v2: Avoid oopsing on NULL encoders (Daniel) s/connector_crtc_ok/connector_has_possible_crtc/ Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-2-ville.syrjala@linux.intel.com
* drm: Stop updating plane->crtc/fb/old_fb on atomic driversVille Syrjälä2018-06-111-7/+0
| | | | | | | | | | | | | | Stop playing around with plane->crtc/fb/old_fb with atomic drivers. Make life a lot simpler when we don't have to do the magic old_fb vs. fb dance around plane updates. That way we can't risk plane->fb getting out of sync with plane->state->fb and we're less likely to leak any refcounts as well. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com Reviewed-by: Sinclair Yeh <syeh@vmware.com>
* drm/fb-helper: Fix typo on kerneldocDaniel Vetter2018-05-281-1/+1
| | | | | | | | | | | | | | | | Copypasta mistake. Fixes: 742547b73d27 ("drm/fb_helper: Create wrappers for blit, copyarea and fillrect funcs") Cc: Archit Taneja <architt@codeaurora.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524090105.21196-1-daniel.vetter@ffwll.ch
* drm: Add aspect ratio parsing in DRM layerShashank Sharma2018-05-111-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current DRM layer functions don't parse aspect ratio information while converting a user mode->kernel mode or vice versa. This causes modeset to pick mode with wrong aspect ratio, eventually causing failures in HDMI compliance test cases, due to wrong VIC. This patch adds aspect ratio information in DRM's mode conversion and mode comparision functions, to make sure kernel picks mode with right aspect ratio (as per the VIC). Background: This patch was once reviewed and merged, and later reverted due to lack of DRM cap protection. This is a re-spin of this patch, this time with DRM cap protection, to avoid aspect ratio information, when the client doesn't request for it. Review link: https://pw-emeril.freedesktop.org/patch/104068/ Background discussion: https://patchwork.kernel.org/patch/9379057/ Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Lin, Jia <lin.a.jia@intel.com> Signed-off-by: Akashdeep Sharma <akashdeep.sharma@intel.com> Reviewed-by: Jim Bride <jim.bride@linux.intel.com> (V2) Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> (V4) Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> V3: modified the aspect-ratio check in drm_mode_equal as per new flags provided by Ville. https://patchwork.freedesktop.org/patch/188043/ V4: rebase V5: rebase V6: As recommended by Ville, avoided matching of aspect-ratio in drm_fb_helper, while trying to find a common mode among connectors for the target clone mode. V7: rebase V8: rebase V9: rebase V10: rebase V11: rebase V12: rebase V13: rebase V14: rebase Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-10-git-send-email-ankit.k.nautiyal@intel.com
* drm: Remove now pointelss blob->data castsVille Syrjälä2018-03-161-1/+1
| | | | | | | | | Now that blob->data is void* again we don't need the casts anymore. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-2-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/framebuffer: Print task that allocated the fb in debug info.Maarten Lankhorst2017-12-201-0/+1
| | | | | | | | | | This is is very useful to finding sources of leaked framebufers. The fbcon fb is annotated with [fbcon], to give it a better name than kworker. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171220093545.613-3-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/fb-helper: Add drm_fb_helper_defio_init()Noralf Trønnes2017-12-201-1/+53
| | | | | | | | | | | | | | | Add helper for initializing fbdev deferred I/O. The cleanup could have happened in drm_fb_helper_fini(), but that would have required me to set fb_info->fbdefio to NULL in a couple of drivers before they call _fini() to avoid double defio cleanup. The problem is that one of those is vboxvideo which lives in Greg's staging tree. So I put the cleanup in drm_fb_helper_fbdev_teardown(), not perfect but not that bad either. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-6-noralf@tronnes.org
* drm/fb-helper: Update DOC with new helpersNoralf Trønnes2017-12-201-12/+16
| | | | | | | | Promote new helpers for dealing with fbdev emulation. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-5-noralf@tronnes.org
* drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()Noralf Trønnes2017-12-201-0/+106
| | | | | | | | Add helpers to setup and teardown fbdev emulation. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-3-noralf@tronnes.org
* drm/fb-helper: Fix potential NULL pointer dereferenceGustavo A. R. Silva2017-12-061-1/+3
| | | | | | | | | | | | | | | fb_helper is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after fb_helper has been null checked. This issue was detected with the help of Coccinelle. Fixes: c777990fb45b ("drm/fb-helper: Handle function NULL argument") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171205174628.GA31189@embeddedor.com
* drm/fb-helper: Apply panel orientation connector prop to the primary plane, v6.Hans de Goede2017-12-041-2/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apply the "panel orientation" drm connector prop to the primary plane so that fbcon and fbdev using userspace programs display the right way up. Changes in v3: -Use a rotation member in struct drm_fb_helper_crtc and set that from drm_setup_crtcs instead of looping over all crtc's to find the right one later -Since we now no longer look at rotation quirks directly in the fbcon code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright and we cannot use hardware rotation Changes in v4: -Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the plane_state's rotation to an invalid value for disabled crtcs (caught by Fi.CI) Changes in v5: -Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180, 90 / 270 degree rotation requires special handling which we lack atm -Add a TODO comment for 90 / 270 degree hardware rotation -Add some comments to better document the default case when mapping sw_rotations to fbcon_rotate_hints Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-5-hdegoede@redhat.com
* Merge tag 'drm-misc-next-2017-11-30' of ↵Dave Airlie2017-12-041-13/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-next Cross-subsystem Changes: - device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71 panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu) Core Changes: The most important changes are: - Add drm_driver .last_close and .output_poll_changed helpers to reduce fbdev emulation footprint in drivers (Noralf) - Fix plane clipping in core and for vmwgfx (Ville) Then we have a bunch of of improvement for print and debug such as the addition of a framebuffer debugfs file. ELD connector, HDMI and improvements. And a bunch of misc improvements, clean ups and style changes and doc updates [airlied: drop eld bits from amdgpu_dm] Driver Changes: - sii8620: filter unsupported modes and add DVI mode support (Maciej Purski) - rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen) - virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu) - virtio: replace reference/unreference with get/put (Aastha Gupta) - vc4, gma500: Convert timers to use timer_setup() (Kees Cook) - vc4: Reject HDMI modes with too high of clocks (Eric) - vc4: Add support for more pixel formats (Dave Stevenson) - stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu) - stm: ltdc: add a 2nd endpoint (Philippe Cornu) - via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann) * tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits) drm/bridge: tc358767: add copyright lines MAINTAINERS: change maintainer for Rockchip drm drivers drm/vblank: Fix vblank timestamp debugs drm/via: use monotonic time for VIA_WAIT_IRQ dma-buf: Fix ifnullfree.cocci warnings drm/printer: Add drm_vprintf() drm/edid: Allow HDMI infoframe without VIC or S3D video/hdmi: Allow "empty" HDMI infoframes dma-buf/fence: Fix lock inversion within dma-fence-array drm/sti: Handle return value of platform_get_irq_byname drm/vc4: Add support for NV21 and NV61. drm/vc4: Use .pixel_order instead of custom .flip_cbcr drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state() drm/vmwgfx: Try to fix plane clipping drm/vmwgfx: Use drm_plane_helper_check_state() drm/vmwgfx: Remove bogus crtc coords vs fb size check gpu: gma500: remove unneeded DRIVER_LICENSE #define drm: don't link DP aux i2c adapter to the hardware device node ...
| * drm/fb-helper: Add .last_close and .output_poll_changed helpersNoralf Trønnes2017-10-311-0/+28
| | | | | | | | | | | | | | | | | | This adds helpers for the drm_driver->last_close and the drm_mode_config_funcs->output_poll_changed callbacks. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-4-noralf@tronnes.org
| * drm: Add drm_device->fb_helper pointerNoralf Trønnes2017-10-311-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | drm_fb_helper is *the* way of doing fbdev emulation so add a pointer to struct drm_device. This makes it possible to add callback helpers for .last_close and .output_poll_changed further reducing fbdev emulation footprint in drivers. The pointer is set by drm_fb_helper_init() and cleared by drm_fb_helper_fini(). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-3-noralf@tronnes.org
| * drm/fb-helper: Handle function NULL argumentNoralf Trønnes2017-10-311-11/+17
| | | | | | | | | | | | | | | | | | | | | | Make functions tolerate that the drm_fb_helper argument is NULL. This is useful for drivers that continue probing when fbdev emulation fails and not having to do this check themselves. Update docs for functions that already handles this. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171030153951.56269-2-noralf@tronnes.org
* | drm/fb_helper: Disable all crtc's when initial setup fails.Maarten Lankhorst2017-11-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some drivers like i915 start with crtc's enabled, but with deferred fbcon setup they were no longer disabled as part of fbdev setup. Headless units could no longer enter pc3 state because the crtc was still enabled. Fix this by calling restore_fbdev_mode when we would have called it otherwise once during initial fbdev setup. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: ca91a2758fce ("drm/fb-helper: Support deferred setup") Cc: <stable@vger.kernel.org> # v4.14+ Reported-by: Thomas Voegtle <tv@lio96.de> Tested-by: Thomas Voegtle <tv@lio96.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20171128111603.62757-1-maarten.lankhorst@linux.intel.com
* | drm/fb: add support for not enabling fbcon on non-desktop displays [v2]Dave Airlie2017-11-231-1/+5
|/ | | | | | | | | | | | | We don't want fbcon to get used on non-desktop dislays, don't pass them as enabled connectors to the fb helper setup. This prevents my HMD from getting disorted fbcon, and from affecting other displays console. v2: Change description from non-standard to non-desktop Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: Replace kzalloc with kcallocHarsha Sharma2017-10-131-1/+1
| | | | | | | | | | | Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by: Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
* drm/fb-helper: Avoid NULL ptr dereference in fb_set_suspend()Noralf Trønnes2017-09-021-3/+3
| | | | | | | | | | | | drm_fb_helper_resume_worker() uses fb_helper->fbdev to call fb_set_suspend() which dereferences the pointer. Move sync-canceling of the resume worker in drm_fb_helper_fini() before setting fb_helper->fbdev to NULL. Move dirty_work as well. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503940668-25883-2-git-send-email-noralf@tronnes.org
* drm/fb-helper: pass physical dimensions to fbdevDavid Lechner2017-08-071-2/+15
| | | | | | | | | | | | | The fbdev subsystem has a place for physical dimensions (width and height in mm) that is readable by userspace. Since DRM also knows these dimensions, pass this information to the fbdev device. This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs() because fb_helper->fbdev may be NULL in drm_setup_crtcs(). Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501863924-7154-1-git-send-email-david@lechnology.com
* drm/fb-helper: add new drm_setup_crtcs_fb() functionDavid Lechner2017-08-031-12/+18
| | | | | | | | | | | | | | | | | | This adds a new drm_setup_crtcs_fb() function to handle the parts of drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When drm_setup_crtcs() is called during initialization, these fields are NULL because they have not been allocated yet. There is currently a hack at the end of drm_fb_helper_single_fb_probe() that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb() function. This is also done in preparation for addition setup that requires access to fb_helper->fbdev. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
* drm/fb: Fix pointer dereference before null check.David Lechner2017-08-031-1/+1
| | | | | | | | | | | fb_crtc is used before a null check, so move the use after the null check. This was just identified by inspection. I haven't actually observed a crash here, so it is possible that the null check could be unnecessary. Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1501696813-8807-1-git-send-email-david@lechnology.com
* drm/fb-helper: Support deferred setupDaniel Vetter2017-07-261-35/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FB helper code falls back to a 1024x768 mode if no outputs are connected or don't report back any modes upon initialization. This can be annoying because outputs that are added to FB helper later on can't be used with FB helper if they don't support a matching mode. The fallback is in place because VGA connectors can happen to report an unknown connection status even when they are in fact connected. Some drivers have custom solutions in place to defer FB helper setup until at least one output is connected. But the logic behind these solutions is always the same and there is nothing driver-specific about it, so a better alterative is to fix the FB helper core and add support for all drivers automatically. This patch adds support for deferred FB helper setup. It checks all the connectors for their connection status, and if all of them report to be disconnected marks the FB helper as needing deferred setup. Whet setup is deferred, the FB helper core will automatically retry setup after a hotplug event, and it will keep trying until it succeeds. v2: Rebase onto my entirely reworked fbdev helper locking. One big difference is that this version again drops&reacquires the fbdev lock (which is now fb_helper->lock, but before this patch series it was mode_config->mutex), because register_framebuffer must be able to recurse back into fbdev helper code for the initial screen setup. v3: __drm_fb_helper_initial_config must hold fb_helper->lock upon return, I've fumbled that in the deferred setup case (Liviu). v4: I was blind, redo this all. __drm_fb_helper_initial_config shouldn't need to reacquire fb_helper->lock, that just confuses callers. I myself got confused by kernel_fb_helper_lock and somehow thought it's the same as fb_helper->lock. Tsk. Also simplify the logic a bit (we don't need two functions to probe connectors), we can stick much closer to the existing code. And update some comments I've spotted that are outdated. v5: Don't pass -EAGAIN to drivers, it's just an internal error code (Liviu). v6: Add _and_unlock suffix to clarify locking (Maarten) Cc: Liviu Dudau <liviu@dudau.co.uk> Cc: John Stultz <john.stultz@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> (v1) Reviewed-by: Maarten Lankhorst <maarten.lankhorst@intel.com> Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170706130023.28417-3-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* drm/fb-helper: separate the fb_setcmap helper into atomic and legacy pathsPeter Rosin2017-07-141-71/+160
| | | | | | | | | | | | | | | | | The legacy path implements setcmap in terms of crtc .gamma_set. The atomic path implements setcmap by directly updating the crtc gamma_lut property. This has a couple of benefits: - it makes the redundant fb helpers .load_lut, .gamma_set and .gamma_get completely obsolete. They are now unused and subject for removal. - atomic drivers that support clut modes get fbdev support for those from the drm core. This includes atmel-hlcdc, but perhaps others as well? Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-4-peda@axentia.se
* drm/fb-helper: remove drm_fb_helper_save_lut_atomicPeter Rosin2017-07-061-17/+0
| | | | | | | | | drm_fb_helper_save_lut_atomic is redundant since the .gamma_store is now always kept up to date by drm_fb_helper_setcmap. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-4-git-send-email-peda@axentia.se
* drm/fb-helper: keep the .gamma_store updated in drm_fb_helper_setcmapPeter Rosin2017-07-061-0/+19
| | | | | | | | | | I think the gamma_store can end up invalid on error. But the way I read it, that can happen in drm_mode_gamma_set_ioctl as well, so why should this pesky legacy fbdev stuff be any better? Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-3-git-send-email-peda@axentia.se
* drm/fb-helper: factor out pseudo-palettePeter Rosin2017-07-061-23/+37
| | | | | | | | | | The pseudo-palette has nothing to do with the crtc, so move it out of the crtc loop and update the palette once, then break out early. Signed-off-by: Peter Rosin <peda@axenita.se> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1499164632-5582-2-git-send-email-peda@axentia.se
OpenPOWER on IntegriCloud