summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc
Commit message (Collapse)AuthorAgeFilesLines
* drm/amd/display: Disconnect mpcc when changing tgNicholas Kazlauskas2019-04-051-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 77476360f173c127c191bfe8ca8113130ef283b8 ] [Why] This fixes an mpc programming error for the following sequence of atomic commits when pipe split is enabled: Commit 1: CRTC0 (plane 4, plane 3) Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Commit 2: CRTC0 (plane 3), CRTC1 (plane 2) Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0 Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1 Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL In the second commit the assertion for mpcc in use is hit because mpcc disconnect never occurs for pipe 1. This is because the stream changes for pipe 1 and the opp_list is empty. This sequence occurs when running the "igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two displays connected. [How] Expand the reset condition to include: "old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg" ...but only when the plane state is non-NULL for both old and new. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/amd/display: Clear stream->mode_changed after commitNicholas Kazlauskas2019-04-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d8d2f174bcc2c26c3485c70e0c6fe22b27bce739 ] [Why] The stream->mode_changed flag can persist in the following sequence of atomic commits: Commit 1: Enable CRTC0 (mode_changed = true), Enable CRTC1 (mode_changed = true) Commit 2: Disable CRTC1 (mode_changed = false) In this sequence we want to keep the exiting CRTC0 but it's not in the atomic state for the commit since it hasn't been modified. In this case the stream->mode_changed flag persists as true and we don't re-program the planes for the existing stream. [How] The flag needs to be cleared and it makes the most sense to do it within DC after the state has been committed. Nothing following dc_commit_state should think that the stream's mode has changed. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/amd/display: Fix reference counting for struct dc_sink.Mathias Fröhlich2019-04-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit dcd5fb82ffb484124203aa339733663ac0b059f3 ] Reference counting in amdgpu_dm_connector for amdgpu_dm_connector::dc_sink and amdgpu_dm_connector::dc_em_sink as well as in dc_link::local_sink seems to be out of shape. Thus make reference counting consistent for these members and just plain increment the reference count when the variable gets assigned and decrement when the pointer is set to zero or replaced. Also simplify reference counting in selected function sopes to be sure the reference is released in any case. In some cases add NULL pointer check before dereferencing. At a hand full of places a comment is placed to stat that the reference increment happened already somewhere else. This actually fixes the following kernel bug on my system when enabling display core in amdgpu. There are some more similar bug reports around, so it probably helps at more places. kernel BUG at mm/slub.c:294! invalid opcode: 0000 [#1] SMP PTI CPU: 9 PID: 1180 Comm: Xorg Not tainted 5.0.0-rc1+ #2 Hardware name: Supermicro X10DAi/X10DAI, BIOS 3.0a 02/05/2018 RIP: 0010:__slab_free+0x1e2/0x3d0 Code: 8b 54 24 30 48 89 4c 24 28 e8 da fb ff ff 4c 8b 54 24 28 85 c0 0f 85 67 fe ff ff 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b 49 3b 5c 24 28 75 ab 48 8b 44 24 30 49 89 4c 24 28 49 89 44 RSP: 0018:ffffb0978589fa90 EFLAGS: 00010246 RAX: ffff92f12806c400 RBX: 0000000080200019 RCX: ffff92f12806c400 RDX: ffff92f12806c400 RSI: ffffdd6421a01a00 RDI: ffff92ed2f406e80 RBP: ffffb0978589fb40 R08: 0000000000000001 R09: ffffffffc0ee4748 R10: ffff92f12806c400 R11: 0000000000000001 R12: ffffdd6421a01a00 R13: ffff92f12806c400 R14: ffff92ed2f406e80 R15: ffffdd6421a01a20 FS: 00007f4170be0ac0(0000) GS:ffff92ed2fb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562818aaa000 CR3: 000000045745a002 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? drm_dbg+0x87/0x90 [drm] dc_stream_release+0x28/0x50 [amdgpu] amdgpu_dm_connector_mode_valid+0xb4/0x1f0 [amdgpu] drm_helper_probe_single_connector_modes+0x492/0x6b0 [drm_kms_helper] drm_mode_getconnector+0x457/0x490 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] drm_ioctl_kernel+0xa9/0xf0 [drm] drm_ioctl+0x201/0x3a0 [drm] ? drm_connector_property_set_ioctl+0x60/0x60 [drm] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0xa4/0x630 ? __sys_recvmsg+0x83/0xa0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f417110809b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdd8d1c268 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000562818a8ebc0 RCX: 00007f417110809b RDX: 00007ffdd8d1c2a0 RSI: 00000000c05064a7 RDI: 0000000000000012 RBP: 00007ffdd8d1c2a0 R08: 0000562819012280 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c05064a7 R13: 0000000000000012 R14: 0000000000000012 R15: 00007ffdd8d1c2a0 Modules linked in: nfsv4 dns_resolver nfs lockd grace fscache fuse vfat fat amdgpu intel_rapl sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul chash gpu_sched crc32_pclmul snd_hda_codec_realtek ghash_clmulni_intel amd_iommu_v2 iTCO_wdt iTCO_vendor_support ttm snd_hda_codec_generic snd_hda_codec_hdmi ledtrig_audio snd_hda_intel drm_kms_helper snd_hda_codec intel_cstate snd_hda_core drm snd_hwdep snd_seq snd_seq_device intel_uncore snd_pcm intel_rapl_perf snd_timer snd soundcore ioatdma pcspkr intel_wmi_thunderbolt mxm_wmi i2c_i801 lpc_ich pcc_cpufreq auth_rpcgss sunrpc igb crc32c_intel i2c_algo_bit dca wmi hid_cherry analog gameport joydev This patch is based on agd5f/drm-next-5.1-wip. This patch does not require all of that, but agd5f/drm-next-5.1-wip contains at least one more dc_sink counting fix that I could spot. Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
* drm/amd/display: don't call dm_pp_ function from an fpu blockHarry Wentland2019-03-231-2/+6
| | | | | | | | | | | | | | | | | | commit 59d3191f14dc18881fec1172c7096b7863622803 upstream. Powerplay functions called from dm_pp_* functions tend to do a mutex_lock which isn't safe to do inside a kernel_fpu_begin/end block as those will disable/enable preemption. Rearrange the dm_pp_get_clock_levels_by_type_with_voltage calls to make sure they happen outside of kernel_fpu_begin/end. Cc: stable@vger.kernel.org Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drm/amd/display: set clocks to 0 on suspend on dce80Bhawanpreet Lakha2019-02-201-3/+16
| | | | | | | | | | | | | | | | | | [Why] When a dce80 asic was suspended, the clocks were not set to 0. Upon resume, the new clock was compared to the existing clock, they were found to be the same, and so the clock was not set. This resulted in a blackscreen. [How] In atomic commit, check to see if there are any active pipes. If no, set clocks to 0 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amd/display: fix optimize_bandwidth func pointer for dce80Bhawanpreet Lakha2019-02-202-1/+5
| | | | | | | | | | | | | | [Why] optimize_bandwidth was using dce100_prepare_bandwidth this is incorrect [How] change it to dce100_optimize_bandwidth Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amd/display: Fix negative cursor pos programmingNicholas Kazlauskas2019-02-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] If the cursor pos passed from DM is less than the plane_state->dst_rect top left corner then the unsigned cursor pos wraps around to a large positive number since cursor pos is a u32. There was an attempt to guard against this in hubp1_cursor_set_position by checking the src_x_offset and src_y_offset and offseting the cursor hotspot within hubp1_cursor_set_position. However, the cursor position itself is still being programmed incorrectly as a large value. This manifests itself visually as the cursor disappearing or containing strange artifacts near the middle of the screen on raven. [How] Don't subtract the destination rect top left corner from the pos but add it to the hotspot instead. This happens before the pos gets passed into hubp1_cursor_set_position. This achieves the same result but avoids the subtraction wrap around. With this fix the original cursor programming logic can be used again. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Acked-by: Murton Liu <Murton.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Raise dispclk value for dce11Roman Li2019-02-191-3/+8
| | | | | | | | | | | | | | | [Why] The visual corruption due to low display clock value. Observed on Carrizo 4K@60Hz. [How] There was earlier patch for dce_update_clocks: Adding +15% workaround also to to dce11_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix fclk idle stateRoman Li2019-02-011-1/+9
| | | | | | | | | | | | | | [Why] The earlier change 'Fix 6x4K displays' led to fclk value idling at higher DPM level. [How] Apply the fix only to respective multi-display configuration. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Detach backlight from streamDavid Francis2019-01-163-14/+2
| | | | | | | | | | | | | | | | | | | | [Why] Backlight is conceptually a property of links, not streams. All backlight programming is done on links, but there is a stream property bl_pwm_level that is used to restore backlight on dpms on and s3 resume. This is unnecessary, as backlight is already restored by hardware with no driver intervention. [How] Remove bl_pwm_level, and the stream argument to set_backlight Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109375 Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 923fe4951282cbdfce05186c10380bbc45b5e03b)
* drm/amd/display: Fix disabled cursor on top screen edgeNicholas Kazlauskas2019-01-142-2/+2
| | | | | | | | | | | | | | | | | | | | [Why] The cursor vanishes when touching the top of edge of the screen for Raven on Linux. This occurs because the cursor height is not taken into account when deciding to disable the cursor. [How] Factor in the cursor height into the cursor calculations - and mimic the existing x position calculations. Fixes: 94a4ffd1d40b ("drm/amd/display: fix PIP bugs on Dal3") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix warning on raven hotplugRoman Li2019-01-141-13/+6
| | | | | | | | | | | | | | | | [Why] Hotplug on raven results in REG_WAIT_TIMEOUT warning due to failing attempt to lock disabled otg for the hubp interdependent pipes programming. [How] Don't setup pipe interdependencies for disabled otg. Also removed the unnecessary duplicate logic checks. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix PME notification not working in RV desktopCharlene Liu2019-01-141-1/+6
| | | | | | | | | | [Why] PPLIB not receive the PME when unplug. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix MST dp_blank REG_WAIT timeoutJerry (Fangzhi) Zuo2018-12-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to blank stream before deallocate MST payload. [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu] Call Trace: dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu] core_link_disable_stream+0x40/0x230 [amdgpu] ? generic_reg_update_ex+0xdb/0x130 [amdgpu] dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu] dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu] ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu] dc_commit_state+0x2ba/0x4d0 [amdgpu] amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu] ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu] ? wait_for_completion_timeout+0x1f/0x120 ? wait_for_completion_interruptible+0x1c/0x160 commit_tail+0x3d/0x60 [drm_kms_helper] drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper] drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm] drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm] drm_ioctl+0x1e0/0x430 [drm] ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm] ? ep_read_events_proc+0xb0/0xb0 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0 ? timerqueue_add+0x52/0x80 amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ---[ end trace 3ed7b77a97d60f72 ]--- Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/amd/display: validate extended dongle capsWenjing Liu2018-12-201-1/+2
| | | | | | | | | | | | | | | | | | [why] Some dongle doesn't have a valid extended dongle caps, but we still set the extended dongle caps to be valid. This causes validation fails for all timing. [how] If no dp_hdmi_max_pixel_clk is provided, don't use extended dongle caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Optimize passive update planes.Yongqiang Sun2018-12-181-3/+0
| | | | | | | | | | | | | | | [Why] passive update planes still spends a litte more time on some cases. [How] Remove unnecessary trace which involving in some register read. Disable debug output for release build. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: verify lane status before exiting verify link capWenjing Liu2018-12-182-119/+127
| | | | | | | | | | | | | | [why] DP LL CTS1.4 4.3.2.1 test failure. [how] The failure is caused by not handling DP link loss hpd short pusle during set mode. The change is to read link status before set mode link training. If link is lost, re-verify link caps. Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix bug with not updating VSP infoframeSivapiriyanKumarasamy2018-12-181-1/+2
| | | | | | | | | | | | | | | [WHY] Currently, when the VSP infopacket is rebuilt in DM, it is not updated when being programmed in encoder. [HOW] Add new VSP case for update_info_frame Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add retry to read ddc_clock pinPaul Hsieh2018-12-181-6/+17
| | | | | | | | | | | | | | | | | [WHY] On customer board, there is one pluse (1v , < 1ms) on DDC_CLK pin when plug / unplug DP cable. Driver will read it and config DP to HDMI/DVI dongle. [HOW] If there is a real dongle, DDC_CLK should be always pull high. Try to read again to recovery this special case. Retry times = 3. Need additional 3ms to detect DP passive dongle(3 failures) Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Don't skip link training for empty dongleEric Yang2018-12-181-2/+16
| | | | | | | | | | | | | | | | | [Why] Skipping initial link training will result in no verified link cap for mode enumeration. Some versions of the BIOS seem to have PHY programming sequence issue as well if initial link training is skipped, resulting in a softlock in BIOS command table. [How] Identify the empty dongle hotplug case, and still do initial link training. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Wait edp HPD to high in detect_sinkDale Zhao2018-12-181-0/+3
| | | | | | | | | | | | | | | | | | [Why] In 99% user case, edp will be post by vbios. In 1% / current case: Lenovo don't light up edp panel in vbios post stage, vbios won't be lit up. Thus in dal when we init DCN 10 hw, we power up edp, then we start detect_sink, but internal time is too short, when we detect it, HPD is still low, so we don't detect the edp, and edp shows black. [How] When we init hw, we wait edp HPD to high after power up edp. Signed-off-by: Dale Zhao <dale.zhao@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix surface update sequenceDmytro Laktyushkin2018-12-181-2/+4
| | | | | | | | | | | | | | An earlier change added update of interdependent dlg/ttu params for pipes not being updated in the current call. The code fails to check if the other pipes are actually active yet causing an assert. This change adds a check for surface presence on the pipes before updating the interdepenednt params. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix YCbCr420 blank colorEric Yang2018-12-182-1/+19
| | | | | | | | | | | | | | | | | | | | [Why] YCbCr420 packing format uses two chanels for luma, and 1 channel for both chroma component. Our previous implementation did not account for this and results in every other pixel having very high luma value, showing greyish color instead of black. YCbCr444 = <Y1, Cb1, Cr1>; <Y2, Cb2, Cr2> ..... YCbCr420 = <Y1, Y2, Cb1>; <Y3, Y4, Cr1> ..... [How] Program the second channel with the black color value for luma as well. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Hugo Hu <Hugo.Hu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Warn instead of error on REG_WAIT timeoutDavid Francis2018-12-181-2/+2
| | | | | | | | | | | | | | | | | | [Why] DC warns when a REG_WAIT takes a while and full-on errors with stack dump on REG_WAIT timeout. Most of the time it isn't a real issue. [How] Make DC cool its jets - taking a while is a debug message (because it is not something that normal users should need to be aware of), and timeouts are warnings (because it technically shouldn't happen, but it's not a big deal if it does) Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: move AYCrCb8888 format to video sectionDmytro Laktyushkin2018-12-181-1/+1
| | | | | | | | | | This is a dual channel format and should be treated like other video formats Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Don't log error if we have no connectorsHarry Wentland2018-12-181-4/+0
| | | | | | | | | | | | | | [Why] In certain configurations, such as PX configs or some Vega20 parts DC gets created without connectors. [How] Drop the dm_error print when no connectors. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add functionality to get XGMI SS infoLeo Li2018-12-181-0/+15
| | | | | | | | | | | | | | | | | | [Why] When XGMI is enabled, the DP reference clock needs to be adjusted according to the XGMI spread spectrum percentage and mode. But first, we need the ability to fetch this info. [How] Within the BIOS parser, Read from vBIOS when XGMI SS info is requested. In addition, diags build uses include_legacy/atomfirmware.h for the smu_info_v3_3 table headers. Update that as well. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add DCE_VERSION_12_1 enum for Vega 20Leo Li2018-12-185-1/+9
| | | | | | | | | | | | | [Why] We'll need a way to differentiate Vega 20 in DC [How] Add a DCE_VERSION_12_1 enum, which will be returned as the DC version if the ASIC used is a Vega 20. Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Raise dispclk value for PolarisRoman Li2018-12-181-0/+7
| | | | | | | | | | | | | | | [Why] The visual corruption due to low display clock value observed on some systems [How] There was earlier patch for dspclk: 'drm/amd/display: Raise dispclk value for dce_update_clocks' Adding +15% workaround also to to dce112_update_clocks Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Leo Li <Sunpeng.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add tracing to dcDavid Francis2018-12-054-4/+39
| | | | | | | | | | | | | | | | | | | | | | | [Why] Tracing is a useful and cheap debug functionality [How] This creates a new trace system amdgpu_dm, currently with three trace events amdgpu_dc_rreg and amdgpu_dc_wreg report the address and value of any dc register reads and writes amdgpu_dc_performance requires at least one of those two to be enabled. It counts the register reads and writes since the last entry v2: Don't check for NULL before kfree Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Clean up for DCN1 clock debug loggingFatemeh Darbehani2018-11-305-23/+32
| | | | | | | | | | | | | | | [Why] To prepare for clock debug logging. With the exception of removing max_supported_dppclk_khz from logs, there are no functional changes. [How] Add clk_bypass struct and clean up buffer logic Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Su Chung <Su.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: 3.2.08Steven Chiu2018-11-301-1/+1
| | | | | | | Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Allow clock lower on dce100David Francis2018-11-301-1/+13
| | | | | | | | | | | | | | | | | | | dce100 was set to always pass safe_to_lower = false to the clock manager Thus, on suspend the clocks were not being set to 0 which is incorrect behaviour This was causing s3 resume to blackscreen on intel CPUs with dce100 GPUs attached (Note that the hash in this Fixes: tag is the hash on Alex's tree) Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead") Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Program dithering if requestedSivapiriyanKumarasamy2018-11-302-0/+9
| | | | | | | | | | | Dithering needs to be enabled or disabled as requested. If dc_stream_update->dither_option is non-null, program the FMT blocks. Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Add customizable tracing eventChiawen Huang2018-11-301-0/+1
| | | | | | | | | | | | | | [why] add customizable log with a message input, which is for adding test log in debugging as printf function in ETW. [Usage] EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC); Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Re-arrange GFX9 fieldsNevenko Stupar2018-11-301-3/+4
| | | | | | | | | For more clear usage in future Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fbc state could not reach while enable fbchersen wu2018-11-303-83/+66
| | | | | | | | | | | | | | [WHY] fbc is within the data path from memory to dce. while re-configure mc dmif, fbc should be enabled. otherwise, fbc may not be enabled properly. [HOW] before re-configure mc dmif, disable fbc, only after dmif re-configuration fully done, enable fbc again. Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Info frame cleanupHarmanprit Tatla2018-11-302-104/+8
| | | | | | | | | | | | | * Use provided infopacket in stream (if valid) instead of reconstructing in set_vendor_info_packet() * Use proper format for enums * Use dc info packet struct instead Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: CTS 4.2.2.7abdoulaye berthe2018-11-301-1/+1
| | | | | | | | | | | | | [Why] Failure to read Detailed Capabilities Info. [How] Read Detailed Capbilities Info 80h-08Fh. Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Remove unused panel patch "disconnect_delay"Joshua Aberback2018-11-301-1/+0
| | | | | | | | | | [Why] This patch is for use by dm, no need for it in dc. Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Start documentation of DCDavid Francis2018-11-306-13/+135
| | | | | | | | | | | | | | | | | | | | [Why] There are a lot of unintuitive parts of the dm-dc interface. It would help us if these were documented to provide a common understanding of what they are supposed to do [How] Most of this documentation is stubs, to be filled out more thoroughly by the experts Not every dm-accessible function and struct is mentioned. Simple functions like getters, setters, retain, release, create, destroy can be left unadorned. Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: 3.2.07Steven Chiu2018-11-301-1/+1
| | | | | | | Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: fix sporadic multiple aux transaction failureYogesh Mohan Marimuthu2018-11-302-51/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | [why] When there are multiple aux transaction in parallel, it is sometime sporadically the aux transaction starts to continuously fail. The aux transaction was failing because the busy bit for the given gpio pin was always set. The busy bit was alway set because the programming sequence to read, modify and write busy bit was not atomic. Due to which when multiple threads are trying to modify the busy bits for their gpio pins in the same integer variable sometimes the busy bits integer variable is written with old data causing failure. [how] Instead of using individual bits to track gpio pins and grouping them to integers, one byte will be allcoated for each gpio pin. Now whenever a gpio pin needs to be set to mark being used, only writing a value of one to that byte is sufficient, other bytes are not impacted. Also no need to have atomicity with bytes unlike with bits. Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Fix 6x4K displays light-up on Vega20Roman Li2018-11-291-0/+2
| | | | | | | | | | | | | | | | [Why] More than 4x4K didn't lightup on Vega20 due to low dcfclk value. Powerplay expects valid min requirement for dcfclk from DC. [How] Update min_dcfclock_khz based on min_engine_clock value. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Remove duplicate headerBrajeswar Ghosh2018-11-261-1/+0
| | | | | | | Remove dce/dce_mem_input.h which is included more than once Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd: Add abm level drm propertyDavid Francis2018-11-262-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adaptive Backlight Management (ABM) is a feature that reduces backlight level to save power, while increasing pixel contrast and pixel luminance to maintain readability and image quality. ABM will adjust in response to the pixel luminance of the displayed content. ABM is made available as a drm property on eDP monitors called "abm level", which ranges from 0 to 4. When this property is set to 0, ABM is off. Levels 1 to 4 represent different ranges of backlight reduction. At higher levels both the backlight reduction and pixel adjustment will be greater. ABM requires DMCU firmware, which is currently available for Raven ASICs only. If the feature does not work, please ensure your firmware is up to date. v2: Fix commit message, only attach property if DMCU loaded v3: Store ABM level in crtc state to accommodate dc v4: Fix ABM saving on dpms cycle Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Load DMCU IRAMDavid Francis2018-11-262-7/+8
| | | | | | | | | | | | | | | | | | | | | DMCU IRAM must be loaded by the driver before DMCU can function. Move the IRAM code out of the shadows and into a new file modules/power/power_helpers.c The IRAM table contains the backlight curve and ABM parameters Add this new file to the Makefiles Call dmcu_load_iram in late init of DM Move struct dmcu_version from dc.h to dmcu.h to allow dmcu to be included on its own Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Clean up DCN1 clock requestsDavid Francis2018-11-191-9/+5
| | | | | | | | | | | | | | | [Why] There was a full clock request struct of which only one value was being used. [How] Replace the struct with a uint32_t Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: Get backlight controller id from linkDavid Francis2018-11-191-4/+4
| | | | | | | | | | | | | | | [Why] dc_link_set_backlight_level can be called from a context where the stream is unknown. In this case, we can still find which controller is driving this particular backlight [How] Compare links for equality instead of streams Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amd/display: expose surface confirm color functionCharlene Liu2018-11-192-2/+10
| | | | | | | | | | expose dcn10_get_surface_visual_confirm_color() to be used in the future Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OpenPOWER on IntegriCloud