summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/clockdomain.h
Commit message (Collapse)AuthorAgeFilesLines
* ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.Russ Dill2018-05-171-0/+8
| | | | | | | | | | This is used to support suspend modes like RTC-only and hibernate where the state of the registers controlling clockdomains is lost. Signed-off-by: Russ Dill <Russ.Dill@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: clockdomain: remove the obsolete clkdm_xlate_address APITero Kristo2017-12-041-2/+0
| | | | | | This is no longer used for anything so it can be dropped. Signed-off-by: Tero Kristo <t-kristo@ti.com>
* ARM: omap2+: clockdomain: add clkdm_xlate_addressTero Kristo2017-06-061-0/+2
| | | | | | | | | This new function can be used to get the physical address of a clockdomain. Required for mapping the clkctrl clocks under hwmod without modification to DT data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: clockdomain: add usecounting support to autoidle APIsTero Kristo2016-07-041-0/+2
| | | | | | | | | | | | | The previous implementation was racy in many locations, where the current status of the clockdomain was read out, some operations were executed, and the previous status info was used afterwards to decide next state for the clockdomain. Instead, fix the implementation of the allow_idle / deny_idle APIs to properly have usecounting support. This allows clean handling internally within the clockdomain core, and simplifies the usage also within hwmod. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Add minimal clockdomains for dm814xTony Lindgren2015-07-161-1/+2
| | | | | | | | | | For now, let's just add the ones shared with dm816x. The dm814x specific ones can be added as they are tested. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Add clock domain support for dm816xAida Mynzhasova2015-01-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds required definitions and structures for clockdomain initialization, so omap3xxx_clockdomains_init() was substituted by new ti81xx_clockdomains_init() while early initialization of TI81XX platform. Note that we now need to have 81xx in a separate CONFIG_SOC_TI81XX block instead inside the ifdef block for omap3 to avoid make randconfig build errors. This code is based on the TI81XX-LINUX-PSP-04.04.00.02 patches published at: http://downloads.ti.com/dsps/dsps_public_sw/psp/LinuxPSP/TI81XX_04_04/04_04_00_02/index_FDS.html Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> [tony@atomide.com: updated to apply, renamed to clockdomains81xx.c, fixed to use am33xx_clkdm_operations, various fixes suggested by Paul Walmsley] Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: PRCM: cleanup some header includesTero Kristo2014-05-151-1/+2
| | | | | | | | | Some of the includes are totally unnecessary, remove some others in preparation to make the PRCM its own driver. Signed-off-by: Tero Kristo <t-kristo@ti.com> [paul@pwsan.com: updated to apply; fixed build error on OMAP2xxx-only configs] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: CM: AM43x clockdomain dataAmbresh K2013-10-131-0/+2
| | | | | | | | | | | Add the data file to describe clock domains in AM43x SoC. OMAP4 clockdomain operations is being reused here. Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: CM: cm_inst offset s16->u16Ankur Kishore2013-10-131-1/+1
| | | | | | | | | | | | | | | | | Most of the AM43x CM reg address offsets are with MSB bit '1' (on 16-bit value) leading to arithmetic miscalculations while calculating CLOCK ENABLE register's address because cm_inst field was a type of "const s16", so make it "const u16". Also modify relevant functions so as to take care of the above. [afzal@ti.com: fixup and cleanup] Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update headerAmbresh K2013-08-231-0/+1
| | | | | | | | | | Add the data file to describe all clock domains inside the DRA7XX SoC Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: added generation notation to comments] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the headerBenoit Cousson2013-06-081-0/+1
| | | | | | | | | | Add the data file to describe all clock domains inside the OMAP54XX soc. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [santosh.shilimkar@ti.com: Generated es2.0 data] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: clockdomain: convert existing atomic usecounts into ↵Paul Walmsley2013-01-291-3/+3
| | | | | | | | | | | | spinlock-protected shorts/ints The atomic usecounts seem to be confusing, and are no longer needed since the operations that they are attached to really should take place under lock. Replace the atomic counters with simple integers, protected by the enclosing powerdomain spinlock. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
* ARM: OMAP2+: clockdomain: work on wkdep/sleepdep functionsPaul Walmsley2013-01-291-2/+3
| | | | | | | | | | | Split the clkdm_(add|del)_(wk|sleep)dep() functions into lockless and locking versions -- this will be needed in a subsequent patch. Also, while here, remove the leading underscore, since these are not currently static functions. And for functions that have kerneldoc-style comment blocks, but which are missing the initial '/**' tag, fix the tag to indicate that they are kerneldoc. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlockPaul Walmsley2013-01-291-2/+4
| | | | | | | | | | Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
* ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2Tony Lindgren2012-10-181-1/+0
| | | | | | | | | | | | | | | | We want to remove plat/cpu.h. To do this, let's first split it to private soc.h to mach-omap1 and mach-omap2. We have to keep plat/cpu.h around until the remaining drivers are fixed, so let's include the local soc.h in plat/cpu.h and for drivers still including plat/cpu.h. Once the drivers are fixed not to include plat/cpu.h, we can remove the file. This is needed for the ARM common zImage support. [tony@atomide.com: updated to not print a warning] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: remove plat/clock.hPaul Walmsley2012-10-181-1/+1
| | | | | | | | | | | Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2Tony Lindgren2012-10-181-1/+1
| | | | | | | Let's make omap_hwmod local to mach-omap2 for ARM common zImage support. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problemsPaul Walmsley2012-09-231-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The idle status of the IP blocks and clocks inside the EMU clockdomain isn't taken into account by the PRCM hardware when deciding whether the clockdomain is idle. Add a workaround flag in the clockdomain code, CLKDM_MISSING_IDLE_REPORTING, to deal with this problem, and add the code necessary to support it. If CLKDM_MISSING_IDLE_REPORTING is set on a clockdomain, the clockdomain will be forced active whenever an IP block inside that clockdomain is in use, even if the clockdomain supports hardware-supervised idle. When the kernel indicates that the last active IP block inside the clockdomain is no longer used, the clockdomain will be forced idle, or, if that mode is not supported in the hardware, it will be placed into hardware-supervised idle. This patch is an equal collaboration with Jon Hunter <jon-hunter@ti.com>. Ming Lei <ming.lei@canonical.com>, Will Deacon <will.deacon@arm.com>, Madhav Vij <mvij@ti.com>, Kevin Hilman <khilman@ti.com>, Benoît Cousson <b-cousson@ti.com>, and Santosh Shilimkar <santosh.shilimkar@ti.com> all made essential contributions to the understanding of EMU clockdomain power management on OMAP. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Madhav Vij <mvij@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Jon Hunter <jon-hunter@ti.com>
* Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-07-231-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm soc-specific updates from Arnd Bergmann: "This is stuff that does not fit well into another category and in particular is not related to a particular board. The largest part in here is extending the am33xx support in the omap platform." Fix up trivial conflicts in arch/arm/mach-{imx/mach-mx35_3ds.c, tegra/Makefile} * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits) ARM: LPC32xx: Add PWM support ARM: LPC32xx: Add PWM clock ARM: LPC32xx: Set system serial based on cpu unique id ARM: vexpress: Config option for early printk console ARM: vexpress: Add Device Tree for V2P-CA15_CA7 core tile ARM: vexpress: Convert V2P-CA15 Device Tree to 64 bit addresses ARM: vexpress: Add fixed regulator for SMSC ARM: vexpress: Add missing SP804 interrupt in motherboard's DTS files ARM: vexpress: Initial common clock support ARM: SAMSUNG: Introduce Kconfig variable for Samsung custom clk API ARM: EXYNOS: Add missing static storage class specifier in pmu.c file ARM: EXYNOS: Make combiner_init function static ARM: EXYNOS: Update HSOTG PHY clock setting for EXYNOS4X12 ARM: versatile: Make plat-versatile clock optional ARM: vexpress: Check master site in daughterboard's sysctl operations ARM: vexpress: remove automatic errata workaround selection ARM: LPC32xx: Adjust to pl08x DMA interface changes ARM: EXYNOS: Clear SYS_WDTRESET bit to use watchdog reset ARM: imx: fix mx51 ehci setup errors ARM: imx: make ehci power/oc polarities configurable ...
| * ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operationsVaibhav Hiremath2012-06-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AM33XX PRCM module consists of various clockdomains, in all total we have 18 clockdomains available, with following controlling options, - SW Sleep: sw forced sleep transition - SW Wakeup: sw forced wakeup transition This patch adds all available clockdomain data, respective clockdomain operations for AM33XX family of device, and also integrates it into existing OMAP framework. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Vaibhav Bedia <vaibhav.bedia@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> CC: Tony Lindgren <tony@atomide.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: removed CLKDM_NO_AUTODEPS from clockdomain flags, removed unnecessary .clktrctrl_offs field; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-07-231-2/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull general arm-soc cleanups from Arnd Bergmann: "These are all boring changes, moving stuff around or renaming things mostly, and also getting rid of stuff that is duplicate or should not be there to start with. Platform-wise this is all over the place, mainly omap, samsung, at91, imx and tegra." Resolve trivial conflict in arch/arm/mach-omap2/clockdomains3xxx_data.c * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: clps711x: Remove the setting of the time ARM: clps711x: Removed superfluous transform virt_to_bus and related functions ARM: clps711x/p720t: Replace __initcall by .init_early call ARM: S3C24XX: Remove unused GPIO definitions for Openmoko GTA02 board ARM: S3C24XX: Remove unused GPIO definitions for port J ARM: S3C24XX: Remove unused GPA, GPE, GPH bank GPIO aliases ARM: S3C24XX: Convert the touchscreen setup code to common GPIO API ARM: S3C24XX: Convert the PM code to gpiolib API ARM: S3C24XX: Convert QT2410 board file to the gpiolib API ARM: S3C24XX: Convert SMDK board file to the gpiolib API ARM: S3C24XX: Free the backlight gpio requested in Mini2440 board code ARM: imx: remove unused pdata from device macros ARM: imx: Kconfig: Remove IMX_HAVE_PLATFORM_IMX_SSI from MACH_MX25_3DS ARM: at91: fix new build errors ARM: at91: add AIC5 support ARM: at91: remove mach/irqs.h ARM: at91: sparse irq support ARM: at91: at91 based machines specify their own irq handler at run time ARM: at91: remove static irq priorities for sam9x5 ARM: at91: add of irq priorities support ...
| * | ARM: OMAP2+: hwmod: remove prm_clkdm, cm_clkdm; allow hwmods to have no ↵Paul Walmsley2012-06-191-2/+0
| |/ | | | | | | | | | | | | | | clockdomain Remove prm_clkdm and cm_clkdm and allow hwmods to have no clockdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com>
* | ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timerPaul Walmsley2012-07-051-0/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kevin discovered that commit c8d82ff68fb6873691536cf33021977efbf5593c ("ARM: OMAP2/3: hwmod data: Add 32k-sync timer data to hwmod database") broke CORE idle on OMAP3. This prevents device low power states. The root cause is that the 32K sync timer IP block does not support smart-idle mode[1], and so the hwmod code keeps the IP block in no-idle mode while it is active. This in turn prevents the WKUP clockdomain from transitioning to idle. There is a hardcoded sleep dependency that prevents the CORE_L3 and CORE_CM clockdomains from transitioning to idle when the WKUP clockdomain is active[2], so the chip cannot enter any device low power states. It turns out that there is no need to take the 32k sync timer out of idle. The IP block itself probably does not have any native idle handling at all, due to its simplicity. Furthermore, the PRCM will never request target idle for this IP block while the kernel is running, due to the sleep dependency that prevents the WKUP clockdomain from idling while the CORE_L3 clockdomain is active. So we can safely leave the 32k sync timer in target-force-idle mode, even while we continue to access it. This workaround is implemented by defining a new clockdomain flag, CLKDM_ACTIVE_WITH_MPU, that indicates that the clockdomain is guaranteed to be active whenever the MPU is inactive. If an IP block's main functional clock exists inside this clockdomain, and the IP block does not support smart-idle modes, then the hwmod code will place the IP block into target force-idle mode even when enabled. The WKUP clockdomains on OMAP3/4 are marked with this flag. (On OMAP2xxx, no OCP header existed on the 32k sync timer.) Other clockdomains also should be marked with this flag, but those changes are deferred until a later merge window, to create a minimal fix. Another theoretically clean fix for this problem would be to implement PM runtime-based control for 32k sync timer accesses. These PM runtime calls would need to located in a custom clocksource, since the 32k sync timer is currently used as an MMIO clocksource. But in practice, there would be little benefit to doing so; and there would be some cost, due to the addition of unnecessary lines of code and the additional CPU overhead of the PM runtime and hwmod code - unnecessary in this case. Another possible fix would have been to modify the pm34xx.c code to force the IP block idle before entering WFI. But this would not have been an acceptable approach: we are trying to remove this type of centralized IP block idle control from the PM code. This patch is a collaboration between Kevin Hilman <khilman@ti.com> and Paul Walmsley <paul@pwsan.com>. Thanks to Vaibhav Hiremath <hvaibhav@ti.com> for providing comments on an earlier version of this patch. Thanks to Tero Kristo <t-kristo@ti.com> for identifying a bug in an earlier version of this patch. Thanks to Benoît Cousson <b-cousson@ti.com> for identifying some bugs in several versions of this patch and for implementation comments. References: 1. Table 16-96 "REG_32KSYNCNT_SYSCONFIG" of the OMAP34xx TRM Rev. ZU (SWPU223U), available from: http://www.ti.com/pdfs/wtbu/OMAP34x_ES3.1.x_PUBLIC_TRM_vzU.zip 2. Table 4-72 "Sleep Dependencies" of the OMAP34xx TRM Rev. ZU (SWPU223U) 3. ibid. Cc: Tony Lindgren <tony@atomide.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomainPaul Walmsley2011-09-141-7/+8
| | | | | | | | | | | | | At Tony's request, remove the omap_chip bitmasks from the clockdomain and clockdomain dependency definitions. Instead, initialize clockdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Tony Lindgren <tony@atomide.com> found a bug in a previous version of this patch - thanks Tony. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
* OMAP: clockdomain: split clkdm_init()Paul Walmsley2011-09-141-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | In preparation for OMAP_CHIP() removal, split clkdm_init() into four functions. This allows some of them to be called multiple times: for example, clkdm_register_clkdms() can be called once to register clockdomains that are common to a group of SoCs, and once to register clockdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. clkdm_register_platform_funcs() 2. clkdm_register_clkdms() (can be called multiple times) 3. clkdm_register_autodeps() (optional; deprecated) 4. clkdm_complete_init() Convert the OMAP2, 3, and 4 clockdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programmingRajendra Nayak2011-07-101-0/+2
| | | | | | | | | | | | | | Since the clkdm state programming is now done from within the hwmod framework (which uses a per-hwmod lock) instead of the being done from the clock framework (which used a global lock), there is now a need to have per-clkdm locking to prevent races between different hwmods/modules belonging to the same clock domain concurrently programming the clkdm state. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP2+: clockdomain: add clkdm_in_hwsup()Paul Walmsley2011-07-101-0/+6
| | | | | | | | | | | | | | | | | | Add a new function, clkdm_in_hwsup(), that returns true if a clockdomain is configured for hardware-supervised idle. It does not actually read the hardware; rather, it checks an internal flag in the struct clockdomain, which is changed when the clockdomain is switched in and out of hardware-supervised idle. This should be safe, since all changes to the idle mode should pass through the clockdomain code. Based on a set of patches by Rajendra Nayak <rnayak@ti.com> which do the same thing by checking the hardware bits. This approach should be faster and more compact. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: Benoît Cousson <b-cousson@ti.com>
* OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod frameworkBenoit Cousson2011-07-101-0/+3
| | | | | | | | | | | | | | | | | Duplicate the existing API for clockdomain enable from clock to enable a clock domain from hwmod framework. This will be needed when the hwmod framework will move from the current clock centric approach to the module based approach. These APIs are returning 0 for the moment for OMAP2 and OMAP3 until their hwmods are updated with the clksm attribute. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
*-. Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', ↵Paul Walmsley2011-03-101-10/+60
|\ \ | | | | | | | | | 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024
| | * OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disableRajendra Nayak2011-02-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .clkdm_clk_enable .clkdm_clk_disable Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_k_enable as clkdm_clk_enable and omap2_clkdm_clk_disable as clkdm_clk_disable.a Remove unused functions (_enable/_disable_hwsup) and unsed headers from clockdomain.c file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP: clockdomain: Arch specific funcs for hwsup control of clkdmRajendra Nayak2011-02-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .clkdm_allow_idle .clkdm_deny_idle Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_allow_idle as clkdm_allow_idle and omap2_clkdm_deny_idle as clkdm_deny_idle. Make the _clkdm_add_autodeps and _clkdm_del_autodeps as non-static so they can be accessed from OMAP2/3 platform specific code. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP: clockdomain: Arch specific funcs for sleep/wakeup of clkdmRajendra Nayak2011-02-251-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3/4 .clkdm_sleep .clkdm_wakeup Convert the platform-independent framework to call these functions. Also rename the api's by removing the omap2_ preamble. Hence call omap2_clkdm_wakeup as clkdm_wakeup and omap2_clkdm_sleep as clkdm_sleep. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed omap3_clkdm_clear_all_sleepdeps() and omap2_clkdm_clear_all_wkdeps() to test against the correct loop termination condition; thanks to Kevin Hilman for finding and helping fix] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP: clockdomain: Arch specific funcs to handle depsRajendra Nayak2011-02-251-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define the following architecture specific funtions for omap2/3 .clkdm_add_wkdep .clkdm_del_wkdep .clkdm_read_wkdep .clkdm_clear_all_wkdeps .clkdm_add_sleepdep .clkdm_del_sleepdep .clkdm_read_sleepdep .clkdm_clear_all_sleepdeps Convert the platform-independent framework to call these functions. With this also move the clkdm lookups for all wkdep_srcs and sleepdep_srcs at clkdm_init. Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: fixed loop termination conditions in omap*_clkdm_clear_all_*(); thanks to Kevin Hilman for finding and helping fix those bugs; also avoid re-resolving clockdomains during init; abstracted out clkdm_dep walk] Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * OMAP: clockdomain: Infrastructure to put arch specific codeRajendra Nayak2011-02-251-1/+36
| |/ |/| | | | | | | | | | | | | | | | | | | | | Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the clockdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| * OMAP2+: clockdomain: add flag that will block autodeps from being added for ↵Paul Walmsley2011-03-101-2/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | a clockdomain Add a new clockdomain flag, CLKDM_NO_AUTODEPS, which, when marked on a clockdomain, will prevent "autodeps" from being associated with the clockdomain. ("Autodeps" are sleep dependencies and wakeup dependencies from/to processor modules that are automatically added to a clockdomain when it is in hardware-supervised idle mode. They are deprecated -- a relic from the old CDP trees -- but are still in use for OMAP3.) Also, prevent the hwmod code from adding or removing initiator dependencies for clockdomains with this flag set. This patch should allow others to test which clockdomains actually still need autodeps. Thanks to Kevin Hilman <khilman@ti.com> for noting that the original version should also modify the hwmod code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@ti.com>
* omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_maskSantosh Shilimkar2011-01-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct clockdomain member clktrctrl_mask is available for only for OMAP2 and OMAP3 architectures. Technially it is also used only for these archs but this breaks the build with custom OMAP4 configuration. CC arch/arm/mach-omap2/clockdomain.o arch/arm/mach-omap2/clockdomain.c: In function '_enable_hwsup': arch/arm/mach-omap2/clockdomain.c:251: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:254: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function '_disable_hwsup': arch/arm/mach-omap2/clockdomain.c:277: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:280: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_sleep': arch/arm/mach-omap2/clockdomain.c:744: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_wakeup': arch/arm/mach-omap2/clockdomain.c:789: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_clk_enable': arch/arm/mach-omap2/clockdomain.c:922: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:926: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_clk_disable': arch/arm/mach-omap2/clockdomain.c:994: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:998: error: 'struct clockdomain' has no member named 'clktrctrl_mask' make[1]: *** [arch/arm/mach-omap2/clockdomain.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Fix the build break by dropping the #ifdef as suggested by Paul Walmsley Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* OMAP2+: powerdomain: move header file from plat-omap to mach-omap2Paul Walmsley2010-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
* OMAP2+: clockdomain: move header file from plat-omap to mach-omap2Paul Walmsley2010-12-211-0/+149
The OMAP clockdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/clockdomain.h to mach-omap2/clockdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access clockdomain code and data directly. DSPBridge also uses the clockdomain headers for some reason, so, modify it also. The DSPBridge code should not be including the clockdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
OpenPOWER on IntegriCloud