summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8962.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8962.c')
-rw-r--r--sound/soc/codecs/wm8962.c143
1 files changed, 104 insertions, 39 deletions
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index e9710280e5e1..b1dc7d426438 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -51,6 +51,7 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
/* codec private data */
struct wm8962_priv {
+ struct wm8962_pdata pdata;
struct regmap *regmap;
struct snd_soc_codec *codec;
@@ -1600,7 +1601,6 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
@@ -1609,16 +1609,19 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
return 0;
/* If the left PGA is enabled hit that VU bit... */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTL_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
- reg_cache[WM8962_HPOUTL_VOLUME]);
+ ret = snd_soc_read(codec, WM8962_PWR_MGMT_2);
+ if (ret & WM8962_HPOUTL_PGA_ENA) {
+ snd_soc_write(codec, WM8962_HPOUTL_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTL_VOLUME));
+ return 1;
+ }
/* ...otherwise the right. The VU is stereo. */
- if (snd_soc_read(codec, WM8962_PWR_MGMT_2) & WM8962_HPOUTR_PGA_ENA)
- return snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
- reg_cache[WM8962_HPOUTR_VOLUME]);
+ if (ret & WM8962_HPOUTR_PGA_ENA)
+ snd_soc_write(codec, WM8962_HPOUTR_VOLUME,
+ snd_soc_read(codec, WM8962_HPOUTR_VOLUME));
- return 0;
+ return 1;
}
/* The VU bits for the speakers are in a different register to the mute
@@ -2345,12 +2348,13 @@ static const struct snd_soc_dapm_route wm8962_spk_stereo_intercon[] = {
static int wm8962_add_widgets(struct snd_soc_codec *codec)
{
- struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ struct wm8962_pdata *pdata = &wm8962->pdata;
struct snd_soc_dapm_context *dapm = &codec->dapm;
snd_soc_add_codec_controls(codec, wm8962_snd_controls,
ARRAY_SIZE(wm8962_snd_controls));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_add_codec_controls(codec, wm8962_spk_mono_controls,
ARRAY_SIZE(wm8962_spk_mono_controls));
else
@@ -2360,7 +2364,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
snd_soc_dapm_new_controls(dapm, wm8962_dapm_widgets,
ARRAY_SIZE(wm8962_dapm_widgets));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_dapm_new_controls(dapm, wm8962_dapm_spk_mono_widgets,
ARRAY_SIZE(wm8962_dapm_spk_mono_widgets));
else
@@ -2369,7 +2373,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
snd_soc_dapm_add_routes(dapm, wm8962_intercon,
ARRAY_SIZE(wm8962_intercon));
- if (pdata && pdata->spk_mono)
+ if (pdata->spk_mono)
snd_soc_dapm_add_routes(dapm, wm8962_spk_mono_intercon,
ARRAY_SIZE(wm8962_spk_mono_intercon));
else
@@ -3333,14 +3337,14 @@ static struct gpio_chip wm8962_template_chip = {
static void wm8962_init_gpio(struct snd_soc_codec *codec)
{
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
+ struct wm8962_pdata *pdata = &wm8962->pdata;
int ret;
wm8962->gpio_chip = wm8962_template_chip;
wm8962->gpio_chip.ngpio = WM8962_MAX_GPIO;
wm8962->gpio_chip.dev = codec->dev;
- if (pdata && pdata->gpio_base)
+ if (pdata->gpio_base)
wm8962->gpio_chip.base = pdata->gpio_base;
else
wm8962->gpio_chip.base = -1;
@@ -3374,7 +3378,6 @@ static int wm8962_probe(struct snd_soc_codec *codec)
int ret;
struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
- u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
bool dmicclk, dmicdat;
@@ -3421,30 +3424,29 @@ static int wm8962_probe(struct snd_soc_codec *codec)
WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
0);
- if (pdata) {
- /* Apply static configuration for GPIOs */
- for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
- if (pdata->gpio_init[i]) {
- wm8962_set_gpio_mode(codec, i + 1);
- snd_soc_write(codec, 0x200 + i,
- pdata->gpio_init[i] & 0xffff);
- }
+ /* Apply static configuration for GPIOs */
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++)
+ if (pdata->gpio_init[i]) {
+ wm8962_set_gpio_mode(codec, i + 1);
+ snd_soc_write(codec, 0x200 + i,
+ pdata->gpio_init[i] & 0xffff);
+ }
- /* Put the speakers into mono mode? */
- if (pdata->spk_mono)
- reg_cache[WM8962_CLASS_D_CONTROL_2]
- |= WM8962_SPK_MONO;
- /* Micbias setup, detection enable and detection
- * threasholds. */
- if (pdata->mic_cfg)
- snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
- WM8962_MICDET_ENA |
- WM8962_MICDET_THR_MASK |
- WM8962_MICSHORT_THR_MASK |
- WM8962_MICBIAS_LVL,
- pdata->mic_cfg);
- }
+ /* Put the speakers into mono mode? */
+ if (pdata->spk_mono)
+ snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_2,
+ WM8962_SPK_MONO_MASK, WM8962_SPK_MONO);
+
+ /* Micbias setup, detection enable and detection
+ * threasholds. */
+ if (pdata->mic_cfg)
+ snd_soc_update_bits(codec, WM8962_ADDITIONAL_CONTROL_4,
+ WM8962_MICDET_ENA |
+ WM8962_MICDET_THR_MASK |
+ WM8962_MICSHORT_THR_MASK |
+ WM8962_MICBIAS_LVL,
+ pdata->mic_cfg);
/* Latch volume update bits */
snd_soc_update_bits(codec, WM8962_LEFT_INPUT_VOLUME,
@@ -3506,7 +3508,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
wm8962_init_gpio(codec);
if (wm8962->irq) {
- if (pdata && pdata->irq_active_low) {
+ if (pdata->irq_active_low) {
trigger = IRQF_TRIGGER_LOW;
irq_pol = WM8962_IRQ_POL;
} else {
@@ -3584,6 +3586,34 @@ static const struct regmap_config wm8962_regmap = {
.cache_type = REGCACHE_RBTREE,
};
+static int wm8962_set_pdata_from_of(struct i2c_client *i2c,
+ struct wm8962_pdata *pdata)
+{
+ const struct device_node *np = i2c->dev.of_node;
+ u32 val32;
+ int i;
+
+ if (of_property_read_bool(np, "spk-mono"))
+ pdata->spk_mono = true;
+
+ if (of_property_read_u32(np, "mic-cfg", &val32) >= 0)
+ pdata->mic_cfg = val32;
+
+ if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_init,
+ ARRAY_SIZE(pdata->gpio_init)) >= 0)
+ for (i = 0; i < ARRAY_SIZE(pdata->gpio_init); i++) {
+ /*
+ * The range of GPIO register value is [0x0, 0xffff]
+ * While the default value of each register is 0x0
+ * Any other value will be regarded as default value
+ */
+ if (pdata->gpio_init[i] > 0xffff)
+ pdata->gpio_init[i] = 0x0;
+ }
+
+ return 0;
+}
+
static int wm8962_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -3603,6 +3633,15 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
init_completion(&wm8962->fll_lock);
wm8962->irq = i2c->irq;
+ /* If platform data was supplied, update the default data in priv */
+ if (pdata) {
+ memcpy(&wm8962->pdata, pdata, sizeof(struct wm8962_pdata));
+ } else if (i2c->dev.of_node) {
+ ret = wm8962_set_pdata_from_of(i2c, &wm8962->pdata);
+ if (ret != 0)
+ return ret;
+ }
+
for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
wm8962->supplies[i].supply = wm8962_supply_names[i];
@@ -3666,7 +3705,7 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
goto err_enable;
}
- if (pdata && pdata->in4_dc_measure) {
+ if (wm8962->pdata.in4_dc_measure) {
ret = regmap_register_patch(wm8962->regmap,
wm8962_dc_measure,
ARRAY_SIZE(wm8962_dc_measure));
@@ -3719,8 +3758,34 @@ static int wm8962_runtime_resume(struct device *dev)
wm8962_reset(wm8962);
+ /* SYSCLK defaults to on; make sure it is off so we can safely
+ * write to registers if the device is declocked.
+ */
+ regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
+ WM8962_SYSCLK_ENA, 0);
+
+ /* Ensure we have soft control over all registers */
+ regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
+ WM8962_CLKREG_OVD, WM8962_CLKREG_OVD);
+
+ /* Ensure that the oscillator and PLLs are disabled */
+ regmap_update_bits(wm8962->regmap, WM8962_PLL2,
+ WM8962_OSC_ENA | WM8962_PLL2_ENA | WM8962_PLL3_ENA,
+ 0);
+
regcache_sync(wm8962->regmap);
+ regmap_update_bits(wm8962->regmap, WM8962_ANTI_POP,
+ WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA,
+ WM8962_STARTUP_BIAS_ENA | WM8962_VMID_BUF_ENA);
+
+ /* Bias enable at 2*5k (fast start-up) */
+ regmap_update_bits(wm8962->regmap, WM8962_PWR_MGMT_1,
+ WM8962_BIAS_ENA | WM8962_VMID_SEL_MASK,
+ WM8962_BIAS_ENA | 0x180);
+
+ msleep(5);
+
return 0;
}
OpenPOWER on IntegriCloud