diff options
Diffstat (limited to 'drivers/video')
| -rw-r--r-- | drivers/video/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/video/Makefile | 1 | ||||
| -rw-r--r-- | drivers/video/am200epd.c | 295 | ||||
| -rw-r--r-- | drivers/video/metronomefb.c | 314 |
4 files changed, 353 insertions, 273 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8da4683c5d20..ff6ea9a9be22 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -173,6 +173,11 @@ config FB_DEFERRED_IO depends on FB default y +config FB_METRONOME + tristate + depends on FB + depends on FB_DEFERRED_IO + config FB_SVGALIB tristate depends on FB @@ -1927,19 +1932,18 @@ config FB_XILINX framebuffer. ML300 carries a 640*480 LCD display on the board, ML403 uses a standard DB15 VGA connector. -config FB_METRONOME - tristate "Metronome display controller support" +config FB_AM200EPD + tristate "AM-200 E-Ink EPD devkit support" depends on FB && ARCH_PXA && MMU select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO + select FB_METRONOME help - This enables support for the Metronome display controller. Tested - with an E-Ink 800x600 display and Gumstix Connex through an AMLCD - interface. Please read <file:Documentation/fb/metronomefb.txt> - for more information. + This enables support for the Metronome display controller used on + the E-Ink AM-200 EPD devkit. config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 80d58425c641..04bca35403ff 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_FB_DEFERRED_IO) += fb_defio.o # Hardware specific drivers go first obj-$(CONFIG_FB_AMIGA) += amifb.o c2p.o +obj-$(CONFIG_FB_AM200EPD) += am200epd.o obj-$(CONFIG_FB_ARC) += arcfb.o obj-$(CONFIG_FB_CLPS711X) += clps711xfb.o obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o diff --git a/drivers/video/am200epd.c b/drivers/video/am200epd.c new file mode 100644 index 000000000000..51e26c1f5e8b --- /dev/null +++ b/drivers/video/am200epd.c @@ -0,0 +1,295 @@ +/* + * linux/drivers/video/am200epd.c -- Platform device for AM200 EPD kit + * + * Copyright (C) 2008, Jaya Kumar + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. + * + * This work was made possible by help and equipment support from E-Ink + * Corporation. http://support.eink.com/community + * + * This driver is written to be used with the Metronome display controller. + * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600 + * Vizplex EPD on a Gumstix board using the Lyre interface board. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/list.h> +#include <linux/uaccess.h> +#include <linux/irq.h> + +#include <video/metronomefb.h> + +#include <asm/arch/pxa-regs.h> + +/* register offsets for gpio control */ +#define LED_GPIO_PIN 51 +#define STDBY_GPIO_PIN 48 +#define RST_GPIO_PIN 49 +#define RDY_GPIO_PIN 32 +#define ERR_GPIO_PIN 17 +#define PCBPWR_GPIO_PIN 16 + +#define AF_SEL_GPIO_N 0x3 +#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2) +#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2) +#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2) +#define GPDR1_OFFSET(pin) (pin - 32) +#define GPCR1_OFFSET(pin) (pin - 32) +#define GPSR1_OFFSET(pin) (pin - 32) +#define GPCR0_OFFSET(pin) (pin) +#define GPSR0_OFFSET(pin) (pin) + +static void am200_set_gpio_output(int pin, int val) +{ + u8 index; + + index = pin >> 4; + + switch (index) { + case 1: + if (val) + GPSR0 |= (1 << GPSR0_OFFSET(pin)); + else + GPCR0 |= (1 << GPCR0_OFFSET(pin)); + break; + case 2: + break; + case 3: + if (val) + GPSR1 |= (1 << GPSR1_OFFSET(pin)); + else + GPCR1 |= (1 << GPCR1_OFFSET(pin)); + break; + default: + printk(KERN_ERR "unimplemented\n"); + } +} + +static void __devinit am200_init_gpio_pin(int pin, int dir) +{ + u8 index; + /* dir 0 is output, 1 is input + - do 2 things here: + - set gpio alternate function to standard gpio + - set gpio direction to input or output */ + + index = pin >> 4; + switch (index) { + case 1: + GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin)); + + if (dir) + GPDR0 &= ~(1 << pin); + else + GPDR0 |= (1 << pin); + break; + case 2: + GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin)); + + if (dir) + GPDR1 &= ~(1 << GPDR1_OFFSET(pin)); + else + GPDR1 |= (1 << GPDR1_OFFSET(pin)); + break; + case 3: + GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin)); + + if (dir) + GPDR1 &= ~(1 << GPDR1_OFFSET(pin)); + else + GPDR1 |= (1 << GPDR1_OFFSET(pin)); + break; + default: + printk(KERN_ERR "unimplemented\n"); + } +} + +static void am200_init_gpio_regs(struct metronomefb_par *par) +{ + am200_init_gpio_pin(LED_GPIO_PIN, 0); + am200_set_gpio_output(LED_GPIO_PIN, 0); + + am200_init_gpio_pin(STDBY_GPIO_PIN, 0); + am200_set_gpio_output(STDBY_GPIO_PIN, 0); + + am200_init_gpio_pin(RST_GPIO_PIN, 0); + am200_set_gpio_output(RST_GPIO_PIN, 0); + + am200_init_gpio_pin(RDY_GPIO_PIN, 1); + + am200_init_gpio_pin(ERR_GPIO_PIN, 1); + + am200_init_gpio_pin(PCBPWR_GPIO_PIN, 0); + am200_set_gpio_output(PCBPWR_GPIO_PIN, 0); +} + +static void am200_disable_lcd_controller(struct metronomefb_par *par) +{ + LCSR = 0xffffffff; /* Clear LCD Status Register */ + LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */ + + /* we reset and just wait for things to settle */ + msleep(200); +} + +static void am200_enable_lcd_controller(struct metronomefb_par *par) +{ + LCSR = 0xffffffff; + FDADR0 = par->metromem_desc_dma; + LCCR0 |= LCCR0_ENB; +} + +static void am200_init_lcdc_regs(struct metronomefb_par *par) +{ + /* here we do: + - disable the lcd controller + - setup lcd control registers + - setup dma descriptor + - reenable lcd controller + */ + + /* disable the lcd controller */ + am200_disable_lcd_controller(par); + + /* setup lcd control registers */ + LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS + | LCCR0_QDM | LCCR0_BM | LCCR0_OUM; + + LCCR1 = (par->info->var.xres/2 - 1) /* pixels per line */ + | (27 << 10) /* hsync pulse width - 1 */ + | (33 << 16) /* eol pixel count */ + | (33 << 24); /* bol pixel count */ + + LCCR2 = (par->info->var.yres - 1) /* lines per panel */ + | (24 << 10) /* vsync pulse width - 1 */ + | (2 << 16) /* eof pixel count */ + | (0 << 24); /* bof pixel count */ + + LCCR3 = 2 /* pixel clock divisor */ + | (24 << 8) /* AC Bias pin freq */ + | LCCR3_16BPP /* BPP */ + | LCCR3_PCP; /* PCP falling edge */ + +} + +static void am200_post_dma_setup(struct metronomefb_par *par) +{ + par->metromem_desc->mFDADR0 = par->metromem_desc_dma; + par->metromem_desc->mFSADR0 = par->metromem_dma; + par->metromem_desc->mFIDR0 = 0; + par->metromem_desc->mLDCMD0 = par->info->var.xres + * par->info->var.yres; + am200_enable_lcd_controller(par); +} + +static void am200_free_irq(struct fb_info *info) +{ + free_irq(IRQ_GPIO(RDY_GPIO_PIN), info); +} + +static irqreturn_t am200_handle_irq(int irq, void *dev_id) +{ + struct fb_info *info = dev_id; + struct metronomefb_par *par = info->par; + + wake_up_interruptible(&par->waitq); + return IRQ_HANDLED; +} + +static int am200_setup_irq(struct fb_info *info) +{ + int retval; + + retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq, + IRQF_DISABLED, "AM200", info); + if (retval) { + printk(KERN_ERR "am200epd: request_irq failed: %d\n", retval); + return retval; + } + + return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING); +} + +static void am200_set_rst(struct metronomefb_par *par, int state) +{ + am200_set_gpio_output(RST_GPIO_PIN, state); +} + +static void am200_set_stdby(struct metronomefb_par *par, int state) +{ + am200_set_gpio_output(STDBY_GPIO_PIN, state); +} + +static int am200_wait_event(struct metronomefb_par *par) +{ + return wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ); +} + +static int am200_wait_event_intr(struct metronomefb_par *par) +{ + return wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ); +} + +static struct metronome_board am200_board = { + .owner = THIS_MODULE, + .free_irq = am200_free_irq, + .setup_irq = am200_setup_irq, + .init_gpio_regs = am200_init_gpio_regs, + .init_lcdc_regs = am200_init_lcdc_regs, + .post_dma_setup = am200_post_dma_setup, + .set_rst = am200_set_rst, + .set_stdby = am200_set_stdby, + .met_wait_event = am200_wait_event, + .met_wait_event_intr = am200_wait_event_intr, +}; + +static struct platform_device *am200_device; + +static int __init am200_init(void) +{ + int ret; + + /* request our platform independent driver */ + request_module("metronomefb"); + + am200_device = platform_device_alloc("metronomefb", -1); + if (!am200_device) + return -ENOMEM; + + platform_device_add_data(am200_device, &am200_board, + sizeof(am200_board)); + + /* this _add binds metronomefb to am200. metronomefb refcounts am200 */ + ret = platform_device_add(am200_device); + + if (ret) + platform_device_put(am200_device); + + return ret; +} + +static void __exit am200_exit(void) +{ + platform_device_unregister(am200_device); +} + +module_init(am200_init); +module_exit(am200_exit); + +MODULE_DESCRIPTION("board driver for am200 metronome epd kit"); +MODULE_AUTHOR("Jaya Kumar"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c index 5602f3e3f919..17066dd5a190 100644 --- a/drivers/video/metronomefb.c +++ b/drivers/video/metronomefb.c @@ -13,12 +13,10 @@ * Corporation. http://support.eink.com/community * * This driver is written to be used with the Metronome display controller. - * It was tested with an E-Ink 800x600 Vizplex EPD on a Gumstix Connex board - * using the Lyre interface board. + * It is intended to be architecture independent. A board specific driver + * must be used to perform all the physical IO interactions. An example + * is provided as am200epd.c * - * General notes: - * - User must set metronomefb_enable=1 to enable it. - * - See Documentation/fb/metronomefb.txt for how metronome works. */ #include <linux/module.h> #include <linux/kernel.h> @@ -38,9 +36,11 @@ #include <linux/uaccess.h> #include <linux/irq.h> -#include <asm/arch/pxa-regs.h> +#include <video/metronomefb.h> + #include <asm/unaligned.h> + #define DEBUG 1 #ifdef DEBUG #define DPRINTK(f, a...) printk(KERN_DEBUG "%s: " f, __func__ , ## a) @@ -53,35 +53,6 @@ #define DPY_W 832 #define DPY_H 622 -struct metromem_desc { - u32 mFDADR0; - u32 mFSADR0; - u32 mFIDR0; - u32 mLDCMD0; -}; - -struct metromem_cmd { - u16 opcode; - u16 args[((64-2)/2)]; - u16 csum; -}; - -struct metronomefb_par { - unsigned char *metromem; - struct metromem_desc *metromem_desc; - struct metromem_cmd *metromem_cmd; - unsigned char *metromem_wfm; - unsigned char *metromem_img; - u16 *metromem_img_csum; - u16 *csum_table; - int metromemsize; - dma_addr_t metromem_dma; - dma_addr_t metromem_desc_dma; - struct fb_info *info; - wait_queue_head_t waitq; - u8 frame_count; -}; - /* frame differs from image. frame includes non-visible pixels */ struct epd_frame { int fw; /* frame width */ @@ -120,8 +91,7 @@ static struct fb_var_screeninfo metronomefb_var __devinitdata = { .transp = { 0, 0, 0 }, }; -static unsigned int metronomefb_enable; - +/* the waveform structure that is coming from userspace firmware */ struct waveform_hdr { u8 stuff[32]; @@ -301,165 +271,6 @@ static int load_waveform(u8 *mem, size_t size, u8 *metromem, int m, int t, return 0; } -/* register offsets for gpio control */ -#define LED_GPIO_PIN 51 -#define STDBY_GPIO_PIN 48 -#define RST_GPIO_PIN 49 -#define RDY_GPIO_PIN 32 -#define ERR_GPIO_PIN 17 -#define PCBPWR_GPIO_PIN 16 - -#define AF_SEL_GPIO_N 0x3 -#define GAFR0_U_OFFSET(pin) ((pin - 16) * 2) -#define GAFR1_L_OFFSET(pin) ((pin - 32) * 2) -#define GAFR1_U_OFFSET(pin) ((pin - 48) * 2) -#define GPDR1_OFFSET(pin) (pin - 32) -#define GPCR1_OFFSET(pin) (pin - 32) -#define GPSR1_OFFSET(pin) (pin - 32) -#define GPCR0_OFFSET(pin) (pin) -#define GPSR0_OFFSET(pin) (pin) - -static void metronome_set_gpio_output(int pin, int val) -{ - u8 index; - - index = pin >> 4; - - switch (index) { - case 1: - if (val) - GPSR0 |= (1 << GPSR0_OFFSET(pin)); - else - GPCR0 |= (1 << GPCR0_OFFSET(pin)); - break; - case 2: - break; - case 3: - if (val) - GPSR1 |= (1 << GPSR1_OFFSET(pin)); - else - GPCR1 |= (1 << GPCR1_OFFSET(pin)); - break; - default: - printk(KERN_ERR "unimplemented\n"); - } -} - -static void __devinit metronome_init_gpio_pin(int pin, int dir) -{ - u8 index; - /* dir 0 is output, 1 is input - - do 2 things here: - - set gpio alternate function to standard gpio - - set gpio direction to input or output */ - - index = pin >> 4; - switch (index) { - case 1: - GAFR0_U &= ~(AF_SEL_GPIO_N << GAFR0_U_OFFSET(pin)); - - if (dir) - GPDR0 &= ~(1 << pin); - else - GPDR0 |= (1 << pin); - break; - case 2: - GAFR1_L &= ~(AF_SEL_GPIO_N << GAFR1_L_OFFSET(pin)); - - if (dir) - GPDR1 &= ~(1 << GPDR1_OFFSET(pin)); - else - GPDR1 |= (1 << GPDR1_OFFSET(pin)); - break; - case 3: - GAFR1_U &= ~(AF_SEL_GPIO_N << GAFR1_U_OFFSET(pin)); - - if (dir) - GPDR1 &= ~(1 << GPDR1_OFFSET(pin)); - else - GPDR1 |= (1 << GPDR1_OFFSET(pin)); - break; - default: - printk(KERN_ERR "unimplemented\n"); - } -} - -static void __devinit metronome_init_gpio_regs(void) -{ - metronome_init_gpio_pin(LED_GPIO_PIN, 0); - metronome_set_gpio_output(LED_GPIO_PIN, 0); - - metronome_init_gpio_pin(STDBY_GPIO_PIN, 0); - metronome_set_gpio_output(STDBY_GPIO_PIN, 0); - - metronome_init_gpio_pin(RST_GPIO_PIN, 0); - metronome_set_gpio_output(RST_GPIO_PIN, 0); - - metronome_init_gpio_pin(RDY_GPIO_PIN, 1); - - metronome_init_gpio_pin(ERR_GPIO_PIN, 1); - - metronome_init_gpio_pin(PCBPWR_GPIO_PIN, 0); - metronome_set_gpio_output(PCBPWR_GPIO_PIN, 0); -} - -static void metronome_disable_lcd_controller(struct metronomefb_par *par) -{ - LCSR = 0xffffffff; /* Clear LCD Status Register */ - LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */ - - /* we reset and just wait for things to settle */ - msleep(200); -} - -static void metronome_enable_lcd_controller(struct metronomefb_par *par) -{ - LCSR = 0xffffffff; - FDADR0 = par->metromem_desc_dma; - LCCR0 |= LCCR0_ENB; -} - -static void __devinit metronome_init_lcdc_regs(struct metronomefb_par *par) -{ - /* here we do: - - disable the lcd controller - - setup lcd control registers - - setup dma descriptor - - reenable lcd controller - */ - - /* disable the lcd controller */ - metronome_disable_lcd_controller(par); - - /* setup lcd control registers */ - LCCR0 = LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM | LCCR0_PAS - | LCCR0_QDM | LCCR0_BM | LCCR0_OUM; - - LCCR1 = (epd_frame_table[0].fw/2 - 1) /* pixels per line */ - | (27 << 10) /* hsync pulse width - 1 */ - | (33 << 16) /* eol pixel count */ - | (33 << 24); /* bol pixel count */ - - LCCR2 = (epd_frame_table[0].fh - 1) /* lines per panel */ - | (24 << 10) /* vsync pulse width - 1 */ - | (2 << 16) /* eof pixel count */ - | (0 << 24); /* bof pixel count */ - - LCCR3 = 2 /* pixel clock divisor */ - | (24 << 8) /* AC Bias pin freq */ - | LCCR3_16BPP /* BPP */ - | LCCR3_PCP; /* PCP falling edge */ - - /* setup dma descriptor */ - par->metromem_desc->mFDADR0 = par->metromem_desc_dma; - par->metromem_desc->mFSADR0 = par->metromem_dma; - par->metromem_desc->mFIDR0 = 0; - par->metromem_desc->mLDCMD0 = epd_frame_table[0].fw - * epd_frame_table[0].fh; - /* reenable lcd controller */ - metronome_enable_lcd_controller(par); -} - static int metronome_display_cmd(struct metronomefb_par *par) { int i; @@ -493,8 +304,7 @@ static int metronome_display_cmd(struct metronomefb_par *par) par->metromem_cmd->csum = cs; par->metromem_cmd->opcode = opcode; /* display cmd */ - i = wait_event_interruptible_timeout(par->waitq, (GPLR1 & 0x01), HZ); - return i; + return par->board->met_wait_event_intr(par); } static int __devinit metronome_powerup_cmd(struct metronomefb_par *par) @@ -518,13 +328,12 @@ static int __devinit metronome_powerup_cmd(struct metronomefb_par *par) par->metromem_cmd->csum = cs; msleep(1); - metronome_set_gpio_output(RST_GPIO_PIN, 1); + par->board->set_rst(par, 1); msleep(1); - metronome_set_gpio_output(STDBY_GPIO_PIN, 1); + par->board->set_stdby(par, 1); - i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ); - return i; + return par->board->met_wait_event(par); } static int __devinit metronome_config_cmd(struct metronomefb_par *par) @@ -569,8 +378,7 @@ static int __devinit metronome_config_cmd(struct metronomefb_par *par) par->metromem_cmd->csum = cs; par->metromem_cmd->opcode = 0xCC10; /* config cmd */ - i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ); - return i; + return par->board->met_wait_event(par); } static int __devinit metronome_init_cmd(struct metronomefb_par *par) @@ -596,16 +404,19 @@ static int __devinit metronome_init_cmd(struct metronomefb_par *par) par->metromem_cmd->csum = cs; par->metromem_cmd->opcode = 0xCC20; /* init cmd */ - i = wait_event_timeout(par->waitq, (GPLR1 & 0x01), HZ); - return i; + return par->board->met_wait_event(par); } static int __devinit metronome_init_regs(struct metronomefb_par *par) { int res; - metronome_init_gpio_regs(); - metronome_init_lcdc_regs(par); + par->board->init_gpio_regs(par); + + par->board->init_lcdc_regs(par); + + /* now that lcd is setup, setup dma descriptor */ + par->board->post_dma_setup(par); res = metronome_powerup_cmd(par); if (res) @@ -616,8 +427,6 @@ static int __devinit metronome_init_regs(struct metronomefb_par *par) return res; res = metronome_init_cmd(par); - if (res) - return res; return res; } @@ -632,7 +441,7 @@ static void metronomefb_dpy_update(struct metronomefb_par *par) cksum = calc_img_cksum((u16 *) par->metromem_img, (epd_frame_table[0].fw * DPY_H)/2); - *((u16 *) (par->metromem_img) + + *((u16 *)(par->metromem_img) + (epd_frame_table[0].fw * DPY_H)/2) = cksum; metronome_display_cmd(par); } @@ -641,8 +450,8 @@ static u16 metronomefb_dpy_update_page(struct metronomefb_par *par, int index) { int i; u16 csum = 0; - u16 *buf = (u16 __force *) (par->info->screen_base + index); - u16 *img = (u16 *) (par->metromem_img + index); + u16 *buf = (u16 __force *)(par->info->screen_base + index); + u16 *img = (u16 *)(par->metromem_img + index); /* swizzle from vm to metromem and recalc cksum at the same time*/ for (i = 0; i < PAGE_SIZE/2; i++) { @@ -733,7 +542,7 @@ static ssize_t metronomefb_write(struct fb_info *info, const char __user *buf, count = total_size - p; } - dst = (void __force *) (info->screen_base + p); + dst = (void __force *)(info->screen_base + p); if (copy_from_user(dst, buf, count)) err = -EFAULT; @@ -759,18 +568,10 @@ static struct fb_deferred_io metronomefb_defio = { .deferred_io = metronomefb_dpy_deferred_io, }; -static irqreturn_t metronome_handle_irq(int irq, void *dev_id) -{ - struct fb_info *info = dev_id; - struct metronomefb_par *par = info->par; - - wake_up_interruptible(&par->waitq); - return IRQ_HANDLED; -} - static int __devinit metronomefb_probe(struct platform_device *dev) { struct fb_info *info; + struct metronome_board *board; int retval = -ENOMEM; int videomemorysize; unsigned char *videomemory; @@ -779,17 +580,26 @@ static int __devinit metronomefb_probe(struct platform_device *dev) int cmd_size, wfm_size, img_size, padding_size, totalsize; int i; + /* pick up board specific routines */ + board = dev->dev.platform_data; + if (!board) + return -EINVAL; + + /* try to count device specific driver, if can't, platform recalls */ + if (!try_module_get(board->owner)) + return -ENODEV; + /* we have two blocks of memory. info->screen_base which is vm, and is the fb used by apps. par->metromem which is physically contiguous memory and contains the display controller commands, waveform, processed image data and padding. this is the data pulled - by the pxa255's LCD controller and pushed to Metronome */ + by the device's LCD controller and pushed to Metronome */ videomemorysize = (DPY_W*DPY_H); videomemory = vmalloc(videomemorysize); if (!videomemory) - return retval; + return -ENOMEM; memset(videomemory, 0, videomemorysize); @@ -797,7 +607,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev) if (!info) goto err_vfree; - info->screen_base = (char __iomem *) videomemory; + info->screen_base = (char __force __iomem *)videomemory; info->fbops = &metronomefb_ops; info->var = metronomefb_var; @@ -805,6 +615,7 @@ static int __devinit metronomefb_probe(struct platform_device *dev) info->fix.smem_len = videomemorysize; par = info->par; par->info = info; + par->board = board; init_waitqueue_head(&par->waitq); /* this table caches per page csum values. */ @@ -849,11 +660,10 @@ static int __devinit metronomefb_probe(struct platform_device *dev) par->metromem_desc_dma = par->metromem_dma + cmd_size + wfm_size + img_size + padding_size; - /* load the waveform in. assume mode 3, temp 31 for now */ - /* a) request the waveform file from userspace + /* load the waveform in. assume mode 3, temp 31 for now + a) request the waveform file from userspace b) process waveform and decode into metromem */ - - retval = request_firmware(&fw_entry, "waveform.wbf", &dev->dev); + retval = request_firmware(&fw_entry, "metronome.wbf", &dev->dev); if (retval < 0) { printk(KERN_ERR "metronomefb: couldn't get waveform\n"); goto err_dma_free; @@ -867,13 +677,8 @@ static int __devinit metronomefb_probe(struct platform_device *dev) } release_firmware(fw_entry); - retval = request_irq(IRQ_GPIO(RDY_GPIO_PIN), metronome_handle_irq, - IRQF_DISABLED, "Metronome", info); - if (retval) { - dev_err(&dev->dev, "request_irq failed: %d\n", retval); + if (board->setup_irq(info)) goto err_ld_wfm; - } - set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING); retval = metronome_init_regs(par); if (retval < 0) @@ -913,7 +718,7 @@ err_cmap: err_fb_rel: framebuffer_release(info); err_free_irq: - free_irq(IRQ_GPIO(RDY_GPIO_PIN), info); + board->free_irq(info); err_ld_wfm: release_firmware(fw_entry); err_dma_free: @@ -923,6 +728,7 @@ err_csum_table: vfree(par->csum_table); err_vfree: vfree(videomemory); + module_put(board->owner); return retval; } @@ -939,7 +745,8 @@ static int __devexit metronomefb_remove(struct platform_device *dev) vfree(par->csum_table); unregister_framebuffer(info); vfree((void __force *)info->screen_base); - free_irq(IRQ_GPIO(RDY_GPIO_PIN), info); + par->board->free_irq(info); + module_put(par->board->owner); framebuffer_release(info); } return 0; @@ -949,48 +756,21 @@ static struct platform_driver metronomefb_driver = { .probe = metronomefb_probe, .remove = metronomefb_remove, .driver = { + .owner = THIS_MODULE, .name = "metronomefb", }, }; -static struct platform_device *metronomefb_device; - static int __init metronomefb_init(void) { - int ret; - - if (!metronomefb_enable) { - printk(KERN_ERR - "Use metronomefb_enable to enable the device\n"); - return -ENXIO; - } - - ret = platform_driver_register(&metronomefb_driver); - if (!ret) { - metronomefb_device = platform_device_alloc("metronomefb", 0); - if (metronomefb_device) - ret = platform_device_add(metronomefb_device); - else - ret = -ENOMEM; - - if (ret) { - platform_device_put(metronomefb_device); - platform_driver_unregister(&metronomefb_driver); - } - } - return ret; - + return platform_driver_register(&metronomefb_driver); } static void __exit metronomefb_exit(void) { - platform_device_unregister(metronomefb_device); platform_driver_unregister(&metronomefb_driver); } -module_param(metronomefb_enable, uint, 0); -MODULE_PARM_DESC(metronomefb_enable, "Enable communication with Metronome"); - module_init(metronomefb_init); module_exit(metronomefb_exit); |
