summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/dwc3-of-simple.c1
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c2
-rw-r--r--drivers/usb/dwc3/gadget.c55
3 files changed, 36 insertions, 22 deletions
diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
index 974335377d9f..e56d59b19a0e 100644
--- a/drivers/usb/dwc3/dwc3-of-simple.c
+++ b/drivers/usb/dwc3/dwc3-of-simple.c
@@ -61,6 +61,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
if (!simple->clks)
return -ENOMEM;
+ platform_set_drvdata(pdev, simple);
simple->dev = dev;
for (i = 0; i < simple->num_clocks; i++) {
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 45f5a232d9fb..2eb84d6c24a6 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -37,6 +37,7 @@
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
#define PCI_DEVICE_ID_INTEL_BXT_M 0x1aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
+#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
@@ -227,6 +228,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8f8c2157910e..1f5597ef945d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -829,7 +829,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
if (!req->request.no_interrupt && !chain)
trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI;
- if (last)
+ if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc))
trb->ctrl |= DWC3_TRB_CTRL_LST;
if (chain)
@@ -1955,7 +1955,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
struct dwc3_request *req, struct dwc3_trb *trb,
- const struct dwc3_event_depevt *event, int status)
+ const struct dwc3_event_depevt *event, int status,
+ int chain)
{
unsigned int count;
unsigned int s_pkt = 0;
@@ -1964,17 +1965,22 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
dep->queued_requests--;
trace_dwc3_complete_trb(dep, trb);
+ /*
+ * If we're in the middle of series of chained TRBs and we
+ * receive a short transfer along the way, DWC3 will skip
+ * through all TRBs including the last TRB in the chain (the
+ * where CHN bit is zero. DWC3 will also avoid clearing HWO
+ * bit and SW has to do it manually.
+ *
+ * We're going to do that here to avoid problems of HW trying
+ * to use bogus TRBs for transfers.
+ */
+ if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
+ trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+
if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
- /*
- * We continue despite the error. There is not much we
- * can do. If we don't clean it up we loop forever. If
- * we skip the TRB then it gets overwritten after a
- * while since we use them in a ring buffer. A BUG()
- * would help. Lets hope that if this occurs, someone
- * fixes the root cause instead of looking away :)
- */
- dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
- dep->name, trb);
+ return 1;
+
count = trb->size & DWC3_TRB_SIZE_MASK;
if (dep->direction) {
@@ -2013,15 +2019,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
s_pkt = 1;
}
- /*
- * We assume here we will always receive the entire data block
- * which we should receive. Meaning, if we program RX to
- * receive 4K but we receive only 2K, we assume that's all we
- * should receive and we simply bounce the request back to the
- * gadget driver for further processing.
- */
- req->request.actual += req->request.length - count;
- if (s_pkt)
+ if (s_pkt && !chain)
return 1;
if ((event->status & DEPEVT_STATUS_LST) &&
(trb->ctrl & (DWC3_TRB_CTRL_LST |
@@ -2040,13 +2038,17 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
struct dwc3_trb *trb;
unsigned int slot;
unsigned int i;
+ int count = 0;
int ret;
do {
+ int chain;
+
req = next_request(&dep->started_list);
if (WARN_ON_ONCE(!req))
return 1;
+ chain = req->request.num_mapped_sgs > 0;
i = 0;
do {
slot = req->first_trb_index + i;
@@ -2054,13 +2056,22 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
slot++;
slot %= DWC3_TRB_NUM;
trb = &dep->trb_pool[slot];
+ count += trb->size & DWC3_TRB_SIZE_MASK;
ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
- event, status);
+ event, status, chain);
if (ret)
break;
} while (++i < req->request.num_mapped_sgs);
+ /*
+ * We assume here we will always receive the entire data block
+ * which we should receive. Meaning, if we program RX to
+ * receive 4K but we receive only 2K, we assume that's all we
+ * should receive and we simply bounce the request back to the
+ * gadget driver for further processing.
+ */
+ req->request.actual += req->request.length - count;
dwc3_gadget_giveback(dep, req, status);
if (ret)
OpenPOWER on IntegriCloud