diff options
Diffstat (limited to 'drivers/staging/csr/csr_wifi_hip_unifi.h')
-rw-r--r-- | drivers/staging/csr/csr_wifi_hip_unifi.h | 871 |
1 files changed, 0 insertions, 871 deletions
diff --git a/drivers/staging/csr/csr_wifi_hip_unifi.h b/drivers/staging/csr/csr_wifi_hip_unifi.h deleted file mode 100644 index 1160a0e25c7d..000000000000 --- a/drivers/staging/csr/csr_wifi_hip_unifi.h +++ /dev/null @@ -1,871 +0,0 @@ -/***************************************************************************** - - (c) Cambridge Silicon Radio Limited 2012 - All rights reserved and confidential information of CSR - - Refer to LICENSE.txt included with this source for details - on the license terms. - -*****************************************************************************/ - -/* - * --------------------------------------------------------------------------- - * - * FILE : csr_wifi_hip_unifi.h - * - * PURPOSE : Public API for the UniFi HIP core library. - * - * --------------------------------------------------------------------------- - */ -#ifndef __CSR_WIFI_HIP_UNIFI_H__ -#define __CSR_WIFI_HIP_UNIFI_H__ 1 - -#ifndef CSR_WIFI_HIP_TA_DISABLE -#include "csr_wifi_router_ctrl_prim.h" -#include "csr_wifi_router_prim.h" -#else -#include "csr_time.h" -#endif - -/* SDIO chip ID numbers */ - -/* Manufacturer id */ -#define SDIO_MANF_ID_CSR 0x032a - -/* Device id */ -#define SDIO_CARD_ID_UNIFI_1 0x0001 -#define SDIO_CARD_ID_UNIFI_2 0x0002 -#define SDIO_CARD_ID_UNIFI_3 0x0007 -#define SDIO_CARD_ID_UNIFI_4 0x0008 - -/* Function number for WLAN */ -#define SDIO_WLAN_FUNC_ID_UNIFI_1 0x0001 -#define SDIO_WLAN_FUNC_ID_UNIFI_2 0x0001 -#define SDIO_WLAN_FUNC_ID_UNIFI_3 0x0001 -#define SDIO_WLAN_FUNC_ID_UNIFI_4 0x0002 - -/* Maximum SDIO bus clock supported. */ -#define UNIFI_SDIO_CLOCK_MAX_HZ 50000000 /* Hz */ - -/* - * Initialisation SDIO bus clock. - * - * The initialisation clock speed should be used from when the chip has been - * reset until the first MLME-reset has been received (i.e. during firmware - * initialisation), unless UNIFI_SDIO_CLOCK_SAFE_HZ applies. - */ -#define UNIFI_SDIO_CLOCK_INIT_HZ 12500000 /* Hz */ - -/* - * Safe SDIO bus clock. - * - * The safe speed should be used when the chip is in deep sleep or - * it's state is unknown (just after reset / power on). - */ -#define UNIFI_SDIO_CLOCK_SAFE_HZ 1000000 /* Hz */ - -/* I/O default block size to use for UniFi. */ -#define UNIFI_IO_BLOCK_SIZE 64 - -#define UNIFI_WOL_OFF 0 -#define UNIFI_WOL_SDIO 1 -#define UNIFI_WOL_PIO 2 - -/* The number of Tx traffic queues */ -#define UNIFI_NO_OF_TX_QS 4 - -#define CSR_WIFI_HIP_RESERVED_HOST_TAG 0xFFFFFFFF - -/* - * The number of slots in the from-host queues. - * - * UNIFI_SOFT_TRAFFIC_Q_LENGTH is the number of slots in the traffic queues - * and there will be UNIFI_NO_OF_TX_QS of them. - * Traffic queues are used for data packets. - * - * UNIFI_SOFT_COMMAND_Q_LENGTH is the number of slots in the command queue. - * The command queue is used for MLME management requests. - * - * Queues are ring buffers and so must always have 1 unused slot. - */ -#define UNIFI_SOFT_TRAFFIC_Q_LENGTH (20 + 1) -#define UNIFI_SOFT_COMMAND_Q_LENGTH (16 + 1) - -#include "csr_framework_ext.h" /* from the synergy porting folder */ -#include "csr_sdio.h" /* from the synergy porting folder */ -#include "csr_macro.h" /* from the synergy porting folder */ -#include "csr_wifi_result.h" - -/* Utility MACROS. Note that UNIFI_MAC_ADDRESS_CMP returns TRUE on success */ -#define UNIFI_MAC_ADDRESS_COPY(dst, src) \ - do { (dst)[0] = (src)[0]; (dst)[1] = (src)[1]; \ - (dst)[2] = (src)[2]; (dst)[3] = (src)[3]; \ - (dst)[4] = (src)[4]; (dst)[5] = (src)[5]; \ - } while (0) - -#define UNIFI_MAC_ADDRESS_CMP(addr1, addr2) \ - (((addr1)[0] == (addr2)[0]) && ((addr1)[1] == (addr2)[1]) && \ - ((addr1)[2] == (addr2)[2]) && ((addr1)[3] == (addr2)[3]) && \ - ((addr1)[4] == (addr2)[4]) && ((addr1)[5] == (addr2)[5])) - -/* Traffic queue ordered according to priority - * EAPOL/Uncontrolled port Queue should be the last - */ -typedef enum -{ - UNIFI_TRAFFIC_Q_BK = 0, - UNIFI_TRAFFIC_Q_BE, - UNIFI_TRAFFIC_Q_VI, - UNIFI_TRAFFIC_Q_VO, - UNIFI_TRAFFIC_Q_EAPOL, /* Non existent in HIP */ - UNIFI_TRAFFIC_Q_MAX, /* Non existent */ - UNIFI_TRAFFIC_Q_MLME /* Non existent */ -} unifi_TrafficQueue; - -/* - * Structure describing a bulk data slot. - * This structure is shared between the HIP core library and the OS - * layer. See the definition of unifi_net_data_malloc() for more details. - * - * The data_length field is used to indicate empty/occupied state. - * Needs to be defined before #include "unifi_os.h". - */ -typedef struct _bulk_data_desc -{ - const u8 *os_data_ptr; - u32 data_length; - const void *os_net_buf_ptr; - u32 net_buf_length; -} bulk_data_desc_t; - -/* Structure of an entry in the Symbol Look Up Table (SLUT). */ -typedef struct _symbol -{ - u16 id; - u32 obj; -} symbol_t; - -/* - * Header files need to be included from the current directory, - * the SME library, the synergy framework and the OS layer. - * A thin OS layer needs to be implemented in the porting exercise. - * - * Note that unifi_os.h should be included only in unifi.h - */ - -#include "unifi_os.h" - -/* - * Contains the HIP core definitions selected in the porting exercise, such as - * UNIFI_PAD_BULK_DATA_TO_BLOCK_SIZE and UNIFI_PAD_SIGNALS_TO_BLOCK_SIZE. - * Implemented in the OS layer, as part of the porting exersice. - */ -#include "unifi_config.h" - -#include "csr_wifi_hip_signals.h" /* from this dir */ - -/* - * The card structure is an opaque pointer that is used to pass context - * to the upper-edge API functions. - */ -typedef struct card card_t; - - -/* - * This structure describes all of the bulk data that 'might' be - * associated with a signal. - */ -typedef struct _bulk_data_param -{ - bulk_data_desc_t d[UNIFI_MAX_DATA_REFERENCES]; -} bulk_data_param_t; - - -/* - * This structure describes the chip and HIP core lib - * information that exposed to the OS layer. - */ -typedef struct _card_info -{ - u16 chip_id; - u16 chip_version; - u32 fw_build; - u16 fw_hip_version; - u32 sdio_block_size; -} card_info_t; - - -/* - * Mini-coredump definitions - */ -/* Definition of XAP memory ranges used by the mini-coredump system. - * Note that, these values are NOT the same as UNIFI_REGISTERS, etc - * in unifihw.h which don't allow selection of register areas for each XAP. - */ -typedef enum unifi_coredump_space -{ - UNIFI_COREDUMP_MAC_REG, - UNIFI_COREDUMP_PHY_REG, - UNIFI_COREDUMP_SH_DMEM, - UNIFI_COREDUMP_MAC_DMEM, - UNIFI_COREDUMP_PHY_DMEM, - UNIFI_COREDUMP_TRIGGER_MAGIC = 0xFEED -} unifi_coredump_space_t; - -/* Structure used to request a register value from a mini-coredump buffer */ -typedef struct unifi_coredump_req -{ - /* From user */ - s32 index; /* 0=newest, -1=oldest */ - unifi_coredump_space_t space; /* memory space */ - u32 offset; /* register offset in space */ - /* From driver */ - u32 drv_build; /* Driver build id */ - u32 chip_ver; /* Chip version */ - u32 fw_ver; /* Firmware version */ - s32 requestor; /* Requestor: 0=auto dump, 1=manual */ - u32 timestamp; /* time of capture by driver */ - u32 serial; /* capture serial number */ - s32 value; /* register value */ -} unifi_coredump_req_t; /* mini-coredumped reg value request */ - - -/** - * @defgroup upperedge Upper edge API - * - * The following functions are implemented in the HIP core lib. - */ - -/** - * - * Initialise the HIP core lib. - * Note that the OS layer must initialise the SDIO glue layer and obtain - * an SDIO function context, prior to this call. - * - * @param sdiopriv the SDIO function context. - * - * @param ospriv the OS layer context. - * - * @return \p card_t the HIP core lib API context. - * - * @ingroup upperedge - */ -card_t* unifi_alloc_card(CsrSdioFunction *sdiopriv, void *ospriv); - - -/** - * - * Initialise the UniFi chip. - * - * @param card the HIP core lib API context. - * - * @param led_mask the led mask to apply to UniFi. - * - * @return \b 0 if UniFi is initialized. - * - * @return \b -CSR_EIO if an I/O error occurred while initializing UniFi - * - * @return \b -CSR_ENODEV if the card is no longer present. - * - * @ingroup upperedge - */ -CsrResult unifi_init_card(card_t *card, s32 led_mask); - -/** - * - * De-Initialise the HIP core lib. - * - * @param card the HIP core lib API context. - * - * @ingroup upperedge - */ -void unifi_free_card(card_t *card); - -/** - * - * Cancel all the signals pending in the HIP core lib. - * Normally used during a system suspend when the power is retained on UniFi. - * - * @param card the HIP core lib API context. - * - * @ingroup upperedge - */ -void unifi_cancel_pending_signals(card_t *card); - -/** - * - * Send a signal to UniFi. - * Normally it is called from unifi_sys_hip_req() and the OS layer - * Tx data plane. - * - * Note that the bulkdata buffers ownership is passed to the HIP core lib. - * These buffers must be allocated using unifi_net_data_malloc(). - * - * @param card the HIP core lib API context. - * - * @param sigptr pointer to the signal. - * - * @param siglen size of the signal. - * - * @param bulkdata pointer to the bulk data associated with the signal. - * - * @return \b 0 signal is sent. - * - * @return \b -CSR_EIO if an error occurred while sending the signal - * - * @return \b -CSR_ENODEV if the card is no longer present. - * - * @ingroup upperedge - */ -CsrResult unifi_send_signal(card_t *card, const u8 *sigptr, - u32 siglen, - const bulk_data_param_t *bulkdata); - -/** - * - * Check if the HIP core lib has resources to send a signal. - * Normally there no need to use this function. - * - * @param card the HIP core lib API context. - * - * @param sigptr pointer to the signal. - * - * @return \b 0 if there are resources for the signal. - * - * @return \b -CSR_ENOSPC if there are not enough resources - * - * @ingroup upperedge - */ -CsrResult unifi_send_resources_available(card_t *card, const u8 *sigptr); - -/** - * - * Read the UniFi chip and the HIP core lib information. - * - * @param card the HIP core lib API context. - * - * @param card_info pointer to save the information. - * - * @ingroup upperedge - */ -void unifi_card_info(card_t *card, card_info_t *card_info); - -/** - * - * Print the UniFi I/O and Interrupt status. - * Normally it is used for debug purposes only. - * - * @param card the HIP core lib API context. - - * @param status buffer for the chip status - * - * @return \b 0 if the check was performed. - * - * @return \b -CSR_EIO if an error occurred while checking the status. - * - * @return \b -CSR_ENODEV if the card is no longer present. - * - * @ingroup upperedge - */ -CsrResult unifi_check_io_status(card_t *card, s32 *status); - - -/** - * - * Run the HIP core lib Botton-Half. - * Whenever the HIP core lib want this function to be called - * by the OS layer, it calls unifi_run_bh(). - * - * @param card the HIP core lib API context. - * - * @param remaining pointer to return the time (in msecs) that this function - * should be re-scheduled. A return value of 0 means that no re-scheduling - * is required. If unifi_bh() is called before the timeout expires, - * the caller must pass in the remaining time. - * - * @return \b 0 if no error occurred. - * - * @return \b -CSR_ENODEV if the card is no longer present. - * - * @return \b -CSR_E* if an error occurred while running the bottom half. - * - * @ingroup upperedge - */ -CsrResult unifi_bh(card_t *card, u32 *remaining); - - -/** - * UniFi Low Power Mode (Deep Sleep Signaling) - * - * unifi_low_power_mode defines the UniFi Deep Sleep Signaling status. - * Use with unifi_configure_low_power_mode() to enable/disable - * the Deep Sleep Signaling. - */ -enum unifi_low_power_mode -{ - UNIFI_LOW_POWER_DISABLED, - UNIFI_LOW_POWER_ENABLED -}; - -/** - * Periodic Wake Host Mode - * - * unifi_periodic_wake_mode defines the Periodic Wake Host Mode. - * It can only be set to UNIFI_PERIODIC_WAKE_HOST_ENABLED if - * low_power_mode == UNIFI_LOW_POWER_ENABLED. - */ -enum unifi_periodic_wake_mode -{ - UNIFI_PERIODIC_WAKE_HOST_DISABLED, - UNIFI_PERIODIC_WAKE_HOST_ENABLED -}; - -/** - * - * Run the HIP core lib Botton-Half. - * Whenever the HIP core lib want this function to be called - * by the OS layer, it calls unifi_run_bh(). - * - * Typically, the SME is responsible for configuring these parameters, - * so unifi_sys_configure_power_mode_req() is usually implemented - * as a direct call to unifi_configure_low_power_mode(). - * - * Note: When polling mode is used instead of interrupts, - * low_power_mode must never be set to UNIFI_LOW_POWER_ENABLED. - * - * @param card the HIP core lib API context. - * - * @param low_power_mode the Low Power Mode. - * - * @param periodic_wake_mode the Periodic Wake Mode. - * - * @return \b 0 if no error occurred. - * - * @return \b -CSR_E* if the request failed. - * - * @ingroup upperedge - */ -CsrResult unifi_configure_low_power_mode(card_t *card, - enum unifi_low_power_mode low_power_mode, - enum unifi_periodic_wake_mode periodic_wake_mode); - -/** - * - * Forces the UniFi chip to enter a Deep Sleep state. - * This is normally called by the OS layer when the platform suspends. - * - * Note that if the UniFi Low Power Mode is disabled this call fails. - * - * @param card the HIP core lib API context. - * - * @return \b 0 if no error occurred. - * - * @return \b -CSR_ENODEV if the card is no longer present. - * - * @return \b -CSR_E* if the request failed. - * - * @ingroup upperedge - */ -CsrResult unifi_force_low_power_mode(card_t *card); - -#ifndef CSR_WIFI_HIP_TA_DISABLE -/** - * Configure the Traffic Analysis sampling - * - * Enable or disable statistics gathering. - * Enable or disable particular packet detection. - * - * @param card the HIP core context - * @param config_type the item to configure - * @param config pointer to struct containing config info - * - * @return \b 0 if configuration was successful - * - * @return \b -CSR_EINVAL if a parameter had an invalid value - * - * @ingroup upperedge - */ -CsrResult unifi_ta_configure(card_t *card, - CsrWifiRouterCtrlTrafficConfigType config_type, - const CsrWifiRouterCtrlTrafficConfig *config); - -/** - * Pass a packet for Traffic Analysis sampling - * - * @param card the HIP core context - * @param direction the direction (Rx or Tx) of the frame. - * @param data pointer to bulkdata struct containing the packet - * @param saddr the source address of the packet - * @param sta_macaddr the MAC address of the UniFi chip - * @param timestamp the current time in msecs - * - * @ingroup upperedge - */ -void unifi_ta_sample(card_t *card, - CsrWifiRouterCtrlProtocolDirection direction, - const bulk_data_desc_t *data, - const u8 *saddr, - const u8 *sta_macaddr, - u32 timestamp, - u16 rate); - -/** - * Notify the HIP core lib for a detected Traffic Classification. - * Typically, the SME is responsible for configuring these parameters, - * so unifi_sys_traffic_classification_req() is usually implemented - * as a direct call to unifi_ta_classification(). - * - * @param card the HIP core context. - * @param traffic_type the detected traffic type. - * @param period The detected period of the traffic. - * - * @ingroup upperedge - */ -void unifi_ta_classification(card_t *card, - CsrWifiRouterCtrlTrafficType traffic_type, - u16 period); - -#endif -/** - * Use software to hard reset the chip. - * This is a subset of the unifi_init_card() functionality and should - * only be used only to reset a paniced chip before a coredump is taken. - * - * @param card the HIP core context. - * - * @ingroup upperedge - */ -CsrResult unifi_card_hard_reset(card_t *card); - - -CsrResult unifi_card_readn(card_t *card, u32 unifi_addr, void *pdata, u16 len); -CsrResult unifi_card_read16(card_t *card, u32 unifi_addr, u16 *pdata); -CsrResult unifi_card_write16(card_t *card, u32 unifi_addr, u16 data); - - -enum unifi_dbg_processors_select -{ - UNIFI_PROC_MAC, - UNIFI_PROC_PHY, - UNIFI_PROC_BT, - UNIFI_PROC_BOTH, - UNIFI_PROC_INVALID -}; - -CsrResult unifi_card_stop_processor(card_t *card, enum unifi_dbg_processors_select which); - -/** - * Call-outs from the HIP core lib to the OS layer. - * The following functions need to be implemented during the porting exercise. - */ - -/** - * Selects appropriate queue according to priority - * Helps maintain uniformity in queue selection between the HIP - * and the OS layers. - * - * @param priority priority of the packet - * - * @return \b Traffic queue to which a packet of this priority belongs - * - * @ingroup upperedge - */ -unifi_TrafficQueue -unifi_frame_priority_to_queue(CSR_PRIORITY priority); - -/** - * Returns the priority corresponding to a particular Queue when that is used - * when downgrading a packet to a lower AC. - * Helps maintain uniformity in queue - priority mapping between the HIP - * and the OS layers. - * - * @param queue - * - * @return \b Highest priority corresponding to this queue - * - * @ingroup upperedge - */ -CSR_PRIORITY unifi_get_default_downgrade_priority(unifi_TrafficQueue queue); - -/** - * - * Flow control callbacks. - * unifi_pause_xmit() is called when the HIP core lib does not have any - * resources to store data packets. The OS layer needs to pause - * the Tx data plane until unifi_restart_xmit() is called. - * - * @param ospriv the OS layer context. - * - * @ingroup upperedge - */ -void unifi_pause_xmit(void *ospriv, unifi_TrafficQueue queue); -void unifi_restart_xmit(void *ospriv, unifi_TrafficQueue queue); - -/** - * - * Request to run the Bottom-Half. - * The HIP core lib calls this function to request that unifi_bh() - * needs to be run by the OS layer. It can be called anytime, i.e. - * when the unifi_bh() is running. - * Since unifi_bh() is not re-entrant, usually unifi_run_bh() sets - * an event to a thread that schedules a call to unifi_bh(). - * - * @param ospriv the OS layer context. - * - * @ingroup upperedge - */ -CsrResult unifi_run_bh(void *ospriv); - -/** - * - * Delivers a signal received from UniFi to the OS layer. - * Normally, the data signals should be delivered to the data plane - * and all the rest to the SME (unifi_sys_hip_ind()). - * - * Note that the OS layer is responsible for freeing the bulkdata - * buffers, using unifi_net_data_free(). - * - * @param ospriv the OS layer context. - * - * @param sigptr pointer to the signal. - * - * @param siglen size of the signal. - * - * @param bulkdata pointer to the bulk data associated with the signal. - * - * @ingroup upperedge - */ -void unifi_receive_event(void *ospriv, - u8 *sigdata, u32 siglen, - const bulk_data_param_t *bulkdata); - -#ifdef CSR_WIFI_REQUEUE_PACKET_TO_HAL -/** - * - * Used to reque the failed ma packet request back to hal queues - * - * @param ospriv the OS layer context. - * - * @param host_tag host tag for the packet to requeue. - * - * @param bulkDataDesc pointer to the bulk data. - * - * @ingroup upperedge - */ -CsrResult unifi_reque_ma_packet_request(void *ospriv, u32 host_tag, - u16 status, - bulk_data_desc_t *bulkDataDesc); - -#endif -typedef struct -{ - u16 free_fh_sig_queue_slots[UNIFI_NO_OF_TX_QS]; - u16 free_fh_bulkdata_slots; - u16 free_fh_fw_slots; -} unifi_HipQosInfo; - -void unifi_get_hip_qos_info(card_t *card, unifi_HipQosInfo *hipqosinfo); - - -/** - * Functions that read a portion of a firmware file. - * - * Note: If the UniFi chip runs the f/w from ROM, the HIP core may never - * call these functions. Also, the HIP core may call these functions even if - * a f/w file is not available. In this case, it is safe to fail the request. - */ -#define UNIFI_FW_STA 1 /* Identify STA firmware file */ - -/** - * - * Ask the OS layer to initialise a read from a f/w file. - * - * @param ospriv the OS layer context. - * - * @param is_fw if 0 the request if for the loader file, if 1 the request - * is for a f/w file. - * - * @param info a card_info_t structure containing versions information. - * Note that some members of the structure may not be initialised. - * - * @return \p NULL if the file is not available, or a pointer which contains - * OS specific information for the file (typically the contents of the file) - * that the HIP core uses when calling unifi_fw_read() and unifi_fw_read_stop() - * - * @ingroup upperedge - */ -void* unifi_fw_read_start(void *ospriv, s8 is_fw, const card_info_t *info); - -/** - * - * Ask the OS layer to return a portion from a f/w file. - * - * @param ospriv the OS layer context. - * - * @param arg the OS pointer returned by unifi_fw_read_start(). - * - * @param offset the offset in the f/w file to read the read from. - * - * @param buf the buffer to store the returned data. - * - * @param len the size in bytes of the requested read. - * - * @ingroup upperedge - */ -s32 unifi_fw_read(void *ospriv, void *arg, u32 offset, void *buf, u32 len); - -/** - * - * Ask the OS layer to finish reading from a f/w file. - * - * @param ospriv the OS layer context. - * - * @param dlpriv the OS pointer returned by unifi_fw_read_start(). - * - * @ingroup upperedge - */ -void unifi_fw_read_stop(void *ospriv, void *dlpriv); - -/** - * - * Ask OS layer for a handle to a dynamically allocated firmware buffer - * (primarily intended for production test images which may need conversion) - * - * @param ospriv the OS layer context. - * - * @param fwbuf pointer to dynamically allocated buffer - * - * @param len length of provided buffer in bytes - * - * @ingroup upperedge - */ -void* unifi_fw_open_buffer(void *ospriv, void *fwbuf, u32 len); - -/** - * - * Release a handle to a dynamically allocated firmware buffer - * (primarily intended for production test images which may need conversion) - * - * @param ospriv the OS layer context. - * - * @param fwbuf pointer to dynamically allocated buffer - * - * @ingroup upperedge - */ -void unifi_fw_close_buffer(void *ospriv, void *fwbuf); - -#ifndef CSR_WIFI_HIP_TA_DISABLE -/* - * Driver must provide these. - * - * A simple implementation will just call - * unifi_sys_traffic_protocol_ind() or unifi_sys_traffic_classification_ind() - * respectively. See sme_csr_userspace/sme_userspace.c. - */ -/** - * - * Indicates a detected packet of type packet_type. - * Typically, this information is processed by the SME so - * unifi_ta_indicate_protocol() needs to schedule a call to - * unifi_sys_traffic_protocol_ind(). - * - * @param ospriv the OS layer context. - * - * @param packet_type the detected packet type. - * - * @param direction the direction of the packet (Rx, Tx). - * - * @param src_addr the source address of the packet. - * - * @ingroup upperedge - */ -void unifi_ta_indicate_protocol(void *ospriv, - CsrWifiRouterCtrlTrafficPacketType packet_type, - CsrWifiRouterCtrlProtocolDirection direction, - const CsrWifiMacAddress *src_addr); - -/** - * - * Indicates statistics for the sample data over a period. - * Typically, this information is processed by the SME so - * unifi_ta_indicate_sampling() needs to schedule a call to - * unifi_sys_traffic_sample_ind(). - * - * @param ospriv the OS layer context. - * - * @param stats the pointer to the structure that contains the statistics. - * - * @ingroup upperedge - */ -void unifi_ta_indicate_sampling(void *ospriv, CsrWifiRouterCtrlTrafficStats *stats); -void unifi_ta_indicate_l4stats(void *ospriv, - u32 rxTcpThroughput, - u32 txTcpThroughput, - u32 rxUdpThroughput, - u32 txUdpThroughput); -#endif - -void unifi_rx_queue_flush(void *ospriv); - -/** - * Call-out from the SDIO glue layer. - * - * The glue layer needs to call unifi_sdio_interrupt_handler() every time - * an interrupts occurs. - * - * @param card the HIP core context. - * - * @ingroup bottomedge - */ -void unifi_sdio_interrupt_handler(card_t *card); - - -/* HELPER FUNCTIONS */ - -/* - * unifi_init() and unifi_download() implement a subset of unifi_init_card functionality - * that excludes HIP initialization. - */ -CsrResult unifi_init(card_t *card); -CsrResult unifi_download(card_t *card, s32 led_mask); - -/* - * unifi_start_processors() ensures both on-chip processors are running - */ -CsrResult unifi_start_processors(card_t *card); - -CsrResult unifi_capture_panic(card_t *card); - -/* - * Configure HIP interrupt processing mode - */ -#define CSR_WIFI_INTMODE_DEFAULT 0 -#define CSR_WIFI_INTMODE_RUN_BH_ONCE 1 /* Run BH once per interrupt */ - -void unifi_set_interrupt_mode(card_t *card, u32 mode); - -/* - * unifi_request_max_clock() requests that max SDIO clock speed is set at the - * next suitable opportunity. - */ -void unifi_request_max_sdio_clock(card_t *card); - - -/* Functions to lookup bulk data command names. */ -const char* lookup_bulkcmd_name(u16 id); - -/* Function to log HIP's global debug buffer */ -#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE -void unifi_debug_buf_dump(void); -void unifi_debug_log_to_buf(const char *fmt, ...); -void unifi_debug_hex_to_buf(const char *buff, u16 length); -#endif - -/* Mini-coredump utility functions */ -CsrResult unifi_coredump_get_value(card_t *card, struct unifi_coredump_req *req); -CsrResult unifi_coredump_capture(card_t *card, struct unifi_coredump_req *req); -CsrResult unifi_coredump_request_at_next_reset(card_t *card, s8 enable); -CsrResult unifi_coredump_init(card_t *card, u16 num_dump_buffers); -void unifi_coredump_free(card_t *card); - -#endif /* __CSR_WIFI_HIP_UNIFI_H__ */ |