diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 118 |
1 files changed, 112 insertions, 6 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 0730b10b4280..486c075998f6 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -427,6 +427,7 @@ struct srb_iocb { enum nvmefc_fcp_datadir dir; uint32_t dl; uint32_t timeout_sec; + struct list_head entry; } nvme; } u; @@ -470,7 +471,7 @@ typedef struct srb { uint8_t cmd_type; uint8_t pad[3]; atomic_t ref_count; - wait_queue_head_t nvme_ls_waitQ; + wait_queue_head_t nvme_ls_waitq; struct fc_port *fcport; struct scsi_qla_host *vha; uint32_t handle; @@ -901,6 +902,7 @@ struct mbx_cmd_32 { #define MBA_SHUTDOWN_REQUESTED 0x8062 /* Shutdown Requested */ #define MBA_TEMPERATURE_ALERT 0x8070 /* Temperature Alert */ #define MBA_DPORT_DIAGNOSTICS 0x8080 /* D-port Diagnostics */ +#define MBA_TRANS_INSERT 0x8130 /* Transceiver Insertion */ #define MBA_FW_INIT_FAILURE 0x8401 /* Firmware initialization failure */ #define MBA_MIRROR_LUN_CHANGE 0x8402 /* Mirror LUN State Change Notification */ @@ -977,6 +979,7 @@ struct mbx_cmd_32 { #define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */ #define MBC_RESET 0x18 /* Reset. */ #define MBC_GET_ADAPTER_LOOP_ID 0x20 /* Get loop id of ISP2200. */ +#define MBC_GET_SET_ZIO_THRESHOLD 0x21 /* Get/SET ZIO THRESHOLD. */ #define MBC_GET_RETRY_COUNT 0x22 /* Get f/w retry cnt/delay. */ #define MBC_DISABLE_VI 0x24 /* Disable VI operation. */ #define MBC_ENABLE_VI 0x25 /* Enable VI operation. */ @@ -2301,8 +2304,7 @@ typedef struct fc_port { unsigned int login_succ:1; struct work_struct nvme_del_work; - atomic_t nvme_ref_count; - wait_queue_head_t nvme_waitQ; + struct completion nvme_del_done; uint32_t nvme_prli_service_param; #define NVME_PRLI_SP_CONF BIT_7 #define NVME_PRLI_SP_INITIATOR BIT_5 @@ -3338,6 +3340,7 @@ struct qla_qpair { struct work_struct q_work; struct list_head qp_list_elem; /* vha->qp_list */ struct list_head hints_list; + struct list_head nvme_done_list; uint16_t cpuid; struct qla_tgt_counters tgt_counters; }; @@ -3463,8 +3466,15 @@ struct qla_hw_data { uint32_t n2n_ae:1; uint32_t fw_started:1; uint32_t fw_init_done:1; + + uint32_t detected_lr_sfp:1; + uint32_t using_lr_setting:1; } flags; + uint16_t long_range_distance; /* 32G & above */ +#define LR_DISTANCE_5K 1 +#define LR_DISTANCE_10K 0 + /* This spinlock is used to protect "io transactions", you must * acquire it before doing any IO to the card, eg with RD_REG*() and * WRT_REG*() for the duration of your entire commandtransaction. @@ -3712,7 +3722,7 @@ struct qla_hw_data { struct sns_cmd_pkt *sns_cmd; dma_addr_t sns_cmd_dma; -#define SFP_DEV_SIZE 256 +#define SFP_DEV_SIZE 512 #define SFP_BLOCK_SIZE 64 void *sfp_data; dma_addr_t sfp_data_dma; @@ -4017,8 +4027,20 @@ struct qla_hw_data { struct qlt_hw_data tgt; int allow_cna_fw_dump; + uint32_t fw_ability_mask; + uint16_t min_link_speed; + uint16_t max_speed_sup; + + atomic_t nvme_active_aen_cnt; + uint16_t nvme_last_rptd_aen; /* Last recorded aen count */ }; +#define FW_ABILITY_MAX_SPEED_MASK 0xFUL +#define FW_ABILITY_MAX_SPEED_16G 0x0 +#define FW_ABILITY_MAX_SPEED_32G 0x1 +#define FW_ABILITY_MAX_SPEED(ha) \ + (ha->fw_ability_mask & FW_ABILITY_MAX_SPEED_MASK) + /* * Qlogic scsi host structure */ @@ -4089,6 +4111,8 @@ typedef struct scsi_qla_host { #define FX00_CRITEMP_RECOVERY 25 #define FX00_HOST_INFO_RESEND 26 #define QPAIR_ONLINE_CHECK_NEEDED 27 +#define SET_ZIO_THRESHOLD_NEEDED 28 +#define DETECT_SFP_CHANGE 29 unsigned long pci_flags; #define PFLG_DISCONNECTED 0 /* PCI device removed */ @@ -4129,8 +4153,7 @@ typedef struct scsi_qla_host { uint8_t fabric_node_name[WWN_SIZE]; struct nvme_fc_local_port *nvme_local_port; - atomic_t nvme_ref_count; - wait_queue_head_t nvme_waitQ; + struct completion nvme_del_done; struct list_head nvme_rport_list; atomic_t nvme_active_aen_cnt; uint16_t nvme_last_rptd_aen; @@ -4199,6 +4222,7 @@ typedef struct scsi_qla_host { int fcport_count; wait_queue_head_t fcport_waitQ; wait_queue_head_t vref_waitq; + uint8_t min_link_speed_feat; } scsi_qla_host_t; struct qla27xx_image_status { @@ -4373,6 +4397,88 @@ enum nexus_wait_type { WAIT_LUN, }; +/* Refer to SNIA SFF 8247 */ +struct sff_8247_a0 { + u8 txid; /* transceiver id */ + u8 ext_txid; + u8 connector; + /* compliance code */ + u8 eth_infi_cc3; /* ethernet, inifiband */ + u8 sonet_cc4[2]; + u8 eth_cc6; + /* link length */ +#define FC_LL_VL BIT_7 /* very long */ +#define FC_LL_S BIT_6 /* Short */ +#define FC_LL_I BIT_5 /* Intermidiate*/ +#define FC_LL_L BIT_4 /* Long */ +#define FC_LL_M BIT_3 /* Medium */ +#define FC_LL_SA BIT_2 /* ShortWave laser */ +#define FC_LL_LC BIT_1 /* LongWave laser */ +#define FC_LL_EL BIT_0 /* Electrical inter enclosure */ + u8 fc_ll_cc7; + /* FC technology */ +#define FC_TEC_EL BIT_7 /* Electrical inter enclosure */ +#define FC_TEC_SN BIT_6 /* short wave w/o OFC */ +#define FC_TEC_SL BIT_5 /* short wave with OFC */ +#define FC_TEC_LL BIT_4 /* Longwave Laser */ +#define FC_TEC_ACT BIT_3 /* Active cable */ +#define FC_TEC_PAS BIT_2 /* Passive cable */ + u8 fc_tec_cc8; + /* Transmission Media */ +#define FC_MED_TW BIT_7 /* Twin Ax */ +#define FC_MED_TP BIT_6 /* Twited Pair */ +#define FC_MED_MI BIT_5 /* Min Coax */ +#define FC_MED_TV BIT_4 /* Video Coax */ +#define FC_MED_M6 BIT_3 /* Multimode, 62.5um */ +#define FC_MED_M5 BIT_2 /* Multimode, 50um */ +#define FC_MED_SM BIT_0 /* Single Mode */ + u8 fc_med_cc9; + /* speed FC_SP_12: 12*100M = 1200 MB/s */ +#define FC_SP_12 BIT_7 +#define FC_SP_8 BIT_6 +#define FC_SP_16 BIT_5 +#define FC_SP_4 BIT_4 +#define FC_SP_32 BIT_3 +#define FC_SP_2 BIT_2 +#define FC_SP_1 BIT_0 + u8 fc_sp_cc10; + u8 encode; + u8 bitrate; + u8 rate_id; + u8 length_km; /* offset 14/eh */ + u8 length_100m; + u8 length_50um_10m; + u8 length_62um_10m; + u8 length_om4_10m; + u8 length_om3_10m; +#define SFF_VEN_NAME_LEN 16 + u8 vendor_name[SFF_VEN_NAME_LEN]; /* offset 20/14h */ + u8 tx_compat; + u8 vendor_oui[3]; +#define SFF_PART_NAME_LEN 16 + u8 vendor_pn[SFF_PART_NAME_LEN]; /* part number */ + u8 vendor_rev[4]; + u8 wavelength[2]; + u8 resv; + u8 cc_base; + u8 options[2]; /* offset 64 */ + u8 br_max; + u8 br_min; + u8 vendor_sn[16]; + u8 date_code[8]; + u8 diag; + u8 enh_options; + u8 sff_revision; + u8 cc_ext; + u8 vendor_specific[32]; + u8 resv2[128]; +}; + +#define AUTO_DETECT_SFP_SUPPORT(_vha)\ + (ql2xautodetectsfp && !_vha->vp_idx && \ + (IS_QLA25XX(_vha->hw) || IS_QLA81XX(_vha->hw) ||\ + IS_QLA83XX(_vha->hw) || IS_QLA27XX(_vha->hw))) + #define USER_CTRL_IRQ(_ha) (ql2xuctrlirq && QLA_TGT_MODE_ENABLED() && \ (IS_QLA27XX(_ha) || IS_QLA83XX(_ha))) |
