diff options
Diffstat (limited to 'drivers/scsi/libata-core.c')
-rw-r--r-- | drivers/scsi/libata-core.c | 970 |
1 files changed, 607 insertions, 363 deletions
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..8be7dc0b47b8 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -48,6 +48,8 @@ #include <linux/completion.h> #include <linux/suspend.h> #include <linux/workqueue.h> +#include <linux/jiffies.h> +#include <linux/scatterlist.h> #include <scsi/scsi.h> #include "scsi.h" #include "scsi_priv.h" @@ -62,14 +64,15 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; @@ -85,7 +88,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); /** - * ata_tf_load - send taskfile registers to host controller + * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set * @@ -95,7 +98,7 @@ MODULE_VERSION(DRV_VERSION); * Inherited from caller. */ -static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -153,7 +156,7 @@ static void ata_tf_load_pio(struct ata_port *ap, struct ata_taskfile *tf) * Inherited from caller. */ -static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; @@ -222,7 +225,7 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * Inherited from caller. */ -void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_tf_load_mmio(ap, tf); @@ -242,7 +245,7 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -263,7 +266,7 @@ static void ata_exec_command_pio(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) { DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); @@ -283,7 +286,7 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf) * LOCKING: * spin_lock_irqsave(host_set lock) */ -void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) +void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) { if (ap->flags & ATA_FLAG_MMIO) ata_exec_command_mmio(ap, tf); @@ -303,7 +306,7 @@ void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) +static inline void ata_exec(struct ata_port *ap, const struct ata_taskfile *tf) { unsigned long flags; @@ -326,7 +329,7 @@ static inline void ata_exec(struct ata_port *ap, struct ata_taskfile *tf) * Obtains host_set lock. */ -static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) +static void ata_tf_to_host(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); @@ -346,7 +349,7 @@ static void ata_tf_to_host(struct ata_port *ap, struct ata_taskfile *tf) * spin_lock_irqsave(host_set lock) */ -void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf) +void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf) { ap->ops->tf_load(ap, tf); ap->ops->exec_command(ap, tf); @@ -368,6 +371,8 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = inb(ioaddr->error_addr); tf->nsect = inb(ioaddr->nsect_addr); tf->lbal = inb(ioaddr->lbal_addr); tf->lbam = inb(ioaddr->lbam_addr); @@ -400,6 +405,8 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; + tf->command = ata_check_status(ap); + tf->feature = readb((void __iomem *)ioaddr->error_addr); tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); @@ -520,30 +527,6 @@ u8 ata_altstatus(struct ata_port *ap) /** - * ata_chk_err - Read device error reg - * @ap: port where the device is - * - * Reads ATA taskfile error register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_err() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_chk_err(struct ata_port *ap) -{ - if (ap->ops->check_err) - return ap->ops->check_err(ap); - - if (ap->flags & ATA_FLAG_MMIO) { - return readb((void __iomem *) ap->ioaddr.error_addr); - } - return inb(ap->ioaddr.error_addr); -} - -/** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure * @tf: Taskfile to convert * @fis: Buffer into which data will output @@ -556,7 +539,7 @@ u8 ata_chk_err(struct ata_port *ap) * Inherited from caller. */ -void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) +void ata_tf_to_fis(const struct ata_taskfile *tf, u8 *fis, u8 pmp) { fis[0] = 0x27; /* Register - Host to Device FIS */ fis[1] = (pmp & 0xf) | (1 << 7); /* Port multiplier number, @@ -597,7 +580,7 @@ void ata_tf_to_fis(struct ata_taskfile *tf, u8 *fis, u8 pmp) * Inherited from caller. */ -void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) +void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf) { tf->command = fis[2]; /* status */ tf->feature = fis[3]; /* error */ @@ -615,79 +598,53 @@ void ata_tf_from_fis(u8 *fis, struct ata_taskfile *tf) tf->hob_nsect = fis[13]; } -/** - * ata_prot_to_cmd - determine which read/write opcodes to use - * @protocol: ATA_PROT_xxx taskfile protocol - * @lba48: true is lba48 is present - * - * Given necessary input, determine which read/write commands - * to use to transfer data. - * - * LOCKING: - * None. - */ -static int ata_prot_to_cmd(int protocol, int lba48) -{ - int rcmd = 0, wcmd = 0; - - switch (protocol) { - case ATA_PROT_PIO: - if (lba48) { - rcmd = ATA_CMD_PIO_READ_EXT; - wcmd = ATA_CMD_PIO_WRITE_EXT; - } else { - rcmd = ATA_CMD_PIO_READ; - wcmd = ATA_CMD_PIO_WRITE; - } - break; - - case ATA_PROT_DMA: - if (lba48) { - rcmd = ATA_CMD_READ_EXT; - wcmd = ATA_CMD_WRITE_EXT; - } else { - rcmd = ATA_CMD_READ; - wcmd = ATA_CMD_WRITE; - } - break; - - default: - return -1; - } - - return rcmd | (wcmd << 8); -} +static const u8 ata_rw_cmds[] = { + /* pio multi */ + ATA_CMD_READ_MULTI, + ATA_CMD_WRITE_MULTI, + ATA_CMD_READ_MULTI_EXT, + ATA_CMD_WRITE_MULTI_EXT, + /* pio */ + ATA_CMD_PIO_READ, + ATA_CMD_PIO_WRITE, + ATA_CMD_PIO_READ_EXT, + ATA_CMD_PIO_WRITE_EXT, + /* dma */ + ATA_CMD_READ, + ATA_CMD_WRITE, + ATA_CMD_READ_EXT, + ATA_CMD_WRITE_EXT +}; /** - * ata_dev_set_protocol - set taskfile protocol and r/w commands - * @dev: device to examine and configure + * ata_rwcmd_protocol - set taskfile r/w commands and protocol + * @qc: command to examine and configure * - * Examine the device configuration, after we have - * read the identify-device page and configured the - * data transfer mode. Set internal state related to - * the ATA taskfile protocol (pio, pio mult, dma, etc.) - * and calculate the proper read/write commands to use. + * Examine the device configuration and tf->flags to calculate + * the proper read/write commands and protocol to use. * * LOCKING: * caller. */ -static void ata_dev_set_protocol(struct ata_device *dev) +void ata_rwcmd_protocol(struct ata_queued_cmd *qc) { - int pio = (dev->flags & ATA_DFLAG_PIO); - int lba48 = (dev->flags & ATA_DFLAG_LBA48); - int proto, cmd; + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; - if (pio) - proto = dev->xfer_protocol = ATA_PROT_PIO; - else - proto = dev->xfer_protocol = ATA_PROT_DMA; + int index, lba48, write; + + lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; + write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; - cmd = ata_prot_to_cmd(proto, lba48); - if (cmd < 0) - BUG(); + if (dev->flags & ATA_DFLAG_PIO) { + tf->protocol = ATA_PROT_PIO; + index = dev->multi_count ? 0 : 4; + } else { + tf->protocol = ATA_PROT_DMA; + index = 8; + } - dev->read_cmd = cmd & 0xff; - dev->write_cmd = (cmd >> 8) & 0xff; + tf->command = ata_rw_cmds[index + lba48 + write]; } static const char * xfer_mode_str[] = { @@ -869,7 +826,7 @@ static unsigned int ata_devchk(struct ata_port *ap, * the event of failure. */ -unsigned int ata_dev_classify(struct ata_taskfile *tf) +unsigned int ata_dev_classify(const struct ata_taskfile *tf) { /* Apple's open source Darwin code hints that some devices only * put a proper signature into the LBA mid/high registers, @@ -921,8 +878,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) memset(&tf, 0, sizeof(tf)); - err = ata_chk_err(ap); ap->ops->tf_read(ap, &tf); + err = tf.feature; dev->class = ATA_DEV_NONE; @@ -961,7 +918,7 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(u16 *id, unsigned char *s, +void ata_dev_id_string(const u16 *id, unsigned char *s, unsigned int ofs, unsigned int len) { unsigned int c; @@ -1078,7 +1035,7 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, * caller. */ -static inline void ata_dump_id(struct ata_device *dev) +static inline void ata_dump_id(const struct ata_device *dev) { DPRINTK("49==0x%04x " "53==0x%04x " @@ -1106,6 +1063,31 @@ static inline void ata_dump_id(struct ata_device *dev) dev->id[93]); } +/* + * Compute the PIO modes available for this device. This is not as + * trivial as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + */ + +static unsigned int ata_pio_modes(const struct ata_device *adev) +{ + u16 modes; + + /* Usual case. Word 53 indicates word 88 is valid */ + if (adev->id[ATA_ID_FIELD_VALID] & (1 << 2)) { + modes = adev->id[ATA_ID_PIO_MODES] & 0x03; + modes <<= 3; + modes |= 0x7; + return modes; + } + + /* If word 88 isn't valid then Word 51 holds the PIO timing number + for the maximum. Turn it into a mask and return it */ + modes = (2 << (adev->id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + return modes; +} + /** * ata_dev_identify - obtain IDENTIFY x DEVICE page * @ap: port on which device we wish to probe resides @@ -1131,10 +1113,9 @@ static inline void ata_dump_id(struct ata_device *dev) static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; - unsigned int i; + unsigned int major_version; u16 tmp; unsigned long xfer_modes; - u8 status; unsigned int using_edd; DECLARE_COMPLETION(wait); struct ata_queued_cmd *qc; @@ -1188,8 +1169,11 @@ retry: else wait_for_completion(&wait); - status = ata_chk_status(ap); - if (status & ATA_ERR) { + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->ops->tf_read(ap, &qc->tf); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (qc->tf.command & ATA_ERR) { /* * arg! EDD works for all test cases, but seems to return * the ATA signature for some ATAPI devices. Until the @@ -1202,7 +1186,7 @@ retry: * to have this problem. */ if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) { - u8 err = ata_chk_err(ap); + u8 err = qc->tf.feature; if (err & ATA_ABORTED) { dev->class = ATA_DEV_ATAPI; qc->cursg = 0; @@ -1229,9 +1213,9 @@ retry: * common ATA, ATAPI feature tests */ - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id); + /* we require DMA support (bits 8 of word 49) */ + if (!ata_id_has_dma(dev->id)) { + printk(KERN_DEBUG "ata%u: no dma\n", ap->id); goto err_out_nosup; } @@ -1239,10 +1223,8 @@ retry: xfer_modes = dev->id[ATA_ID_UDMA_MODES]; if (!xfer_modes) xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) { - xfer_modes = (dev->id[ATA_ID_PIO_MODES]) << (ATA_SHIFT_PIO + 3); - xfer_modes |= (0x7 << ATA_SHIFT_PIO); - } + if (!xfer_modes) + xfer_modes = ata_pio_modes(dev); ata_dump_id(dev); @@ -1251,32 +1233,75 @@ retry: if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; + /* get major version */ tmp = dev->id[ATA_ID_MAJOR_VER]; - for (i = 14; i >= 1; i--) - if (tmp & (1 << i)) + for (major_version = 14; major_version >= 1; major_version--) + if (tmp & (1 << major_version)) break; - /* we require at least ATA-3 */ - if (i < 3) { - printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id); - goto err_out_nosup; + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (major_version < 4 || (!ata_id_has_lba(dev->id))) { + ata_dev_init_params(ap, dev); + + /* current CHS translation info (id[53-58]) might be + * changed. reread the identify device info. + */ + ata_dev_reread_id(ap, dev); } - if (ata_id_has_lba48(dev->id)) { - dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); + if (ata_id_has_lba(dev->id)) { + dev->flags |= ATA_DFLAG_LBA; + + if (ata_id_has_lba48(dev->id)) { + dev->flags |= ATA_DFLAG_LBA48; + dev->n_sectors = ata_id_u64(dev->id, 100); + } else { + dev->n_sectors = ata_id_u32(dev->id, 60); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = dev->id[1]; + dev->heads = dev->id[3]; + dev->sectors = dev->id[6]; + dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + + if (ata_id_current_chs_valid(dev->id)) { + /* Current CHS translation is valid. */ + dev->cylinders = dev->id[54]; + dev->heads = dev->id[55]; + dev->sectors = dev->id[56]; + + dev->n_sectors = ata_id_u32(dev->id, 57); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); + } ap->host->max_cmd_len = 16; - - /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n", - ap->id, device, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " lba48" : ""); } /* ATAPI-specific feature tests */ @@ -1310,7 +1335,7 @@ err_out: } -static inline u8 ata_dev_knobble(struct ata_port *ap) +static inline u8 ata_dev_knobble(const struct ata_port *ap) { return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); } @@ -1496,7 +1521,153 @@ void ata_port_disable(struct ata_port *ap) ap->flags |= ATA_FLAG_PORT_DISABLED; } -static struct { +/* + * This mode timing computation functionality is ported over from + * drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik + */ +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static const struct ata_timing ata_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + +/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + +/* { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, */ + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + +/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, */ + + { 0xFF } +}; + +#define ENOUGH(v,unit) (((v)-1)/(unit)+1) +#define EZ(v,unit) ((v)?ENOUGH(v,unit):0) + +static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b, + struct ata_timing *m, unsigned int what) +{ + if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup); + if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b); + if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b); + if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active); + if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover); + if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle); + if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma); +} + +static const struct ata_timing* ata_timing_find_mode(unsigned short speed) +{ + const struct ata_timing *t; + + for (t = ata_timing; t->mode != speed; t++) + if (t->mode == 0xFF) + return NULL; + return t; +} + +int ata_timing_compute(struct ata_device *adev, unsigned short speed, + struct ata_timing *t, int T, int UT) +{ + const struct ata_timing *s; + struct ata_timing p; + + /* + * Find the mode. + */ + + if (!(s = ata_timing_find_mode(speed))) + return -EINVAL; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MW_DMA cycle timing. + */ + + if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ + memset(&p, 0, sizeof(p)); + if(speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { + if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; + else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; + } else if(speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { + p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; + } + ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + + ata_timing_quantize(s, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T + * and some other commands. We have to ensure that the DMA cycle timing is + * slower/equal than the fastest PIO timing. + */ + + if (speed > XFER_PIO_4) { + ata_timing_compute(adev, adev->pio_mode, &p, T, UT); + ata_timing_merge(&p, t, t, ATA_TIMING_ALL); + } + + /* + * Lenghten active & recovery time so that cycle time is correct. + */ + + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} + +static const struct { unsigned int shift; u8 base; } xfer_mode_classes[] = { @@ -1603,7 +1774,7 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, */ static void ata_set_mode(struct ata_port *ap) { - unsigned int i, xfer_shift; + unsigned int xfer_shift; u8 xfer_mode; int rc; @@ -1632,11 +1803,6 @@ static void ata_set_mode(struct ata_port *ap) if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); - for (i = 0; i < 2; i++) { - struct ata_device *dev = &ap->device[i]; - ata_dev_set_protocol(dev); - } - return; err_out: @@ -1910,7 +2076,8 @@ err_out: DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(struct ata_port *ap, struct ata_device *dev) +static void ata_pr_blacklisted(const struct ata_port *ap, + const struct ata_device *dev) { printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", ap->id, dev->devno); @@ -1948,7 +2115,7 @@ static const char * ata_dma_blacklist [] = { "_NEC DV5800A", }; -static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) +static int ata_dma_blacklisted(const struct ata_device *dev) { unsigned char model_num[40]; char *s; @@ -1973,9 +2140,9 @@ static int ata_dma_blacklisted(struct ata_port *ap, struct ata_device *dev) return 0; } -static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) +static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) { - struct ata_device *master, *slave; + const struct ata_device *master, *slave; unsigned int mask; master = &ap->device[0]; @@ -1987,14 +2154,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->udma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2004,14 +2171,14 @@ static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift) mask = ap->mwdma_mask; if (ata_dev_present(master)) { mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, master)) { + if (ata_dma_blacklisted(master)) { mask = 0; ata_pr_blacklisted(ap, master); } } if (ata_dev_present(slave)) { mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(ap, slave)) { + if (ata_dma_blacklisted(slave)) { mask = 0; ata_pr_blacklisted(ap, slave); } @@ -2075,7 +2242,7 @@ static int fgb(u32 bitmap) * Zero on success, negative on error. */ -static int ata_choose_xfer_mode(struct ata_port *ap, +static int ata_choose_xfer_mode(const struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out) { @@ -2144,6 +2311,110 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) } /** + * ata_dev_reread_id - Reread the device identify device info + * @ap: port where the device is + * @dev: device to reread the identify device info + * + * LOCKING: + */ + +static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + ata_sg_init_one(qc, dev->id, sizeof(dev->id)); + qc->dma_dir = DMA_FROM_DEVICE; + + if (dev->class == ATA_DEV_ATA) { + qc->tf.command = ATA_CMD_ID_ATA; + DPRINTK("do ATA identify\n"); + } else { + qc->tf.command = ATA_CMD_ID_ATAPI; + DPRINTK("do ATAPI identify\n"); + } + + qc->tf.flags |= ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_PIO; + qc->nsect = 1; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + goto err_out; + + wait_for_completion(&wait); + + swap_buf_le16(dev->id, ATA_ID_WORDS); + + ata_dump_id(dev); + + DPRINTK("EXIT\n"); + + return; +err_out: + ata_port_disable(ap); +} + +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @ap: Port associated with device @dev + * @dev: Device to which command will be sent + * + * LOCKING: + */ + +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + int rc; + unsigned long flags; + u16 sectors = dev->id[6]; + u16 heads = dev->id[3]; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_NODATA; + qc->tf.nsect = sectors; + qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + +/** * ata_sg_clean - Unmap DMA memory associated with command * @qc: Command containing DMA memory to be released * @@ -2284,19 +2555,12 @@ void ata_qc_prep(struct ata_queued_cmd *qc) void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { - struct scatterlist *sg; - qc->flags |= ATA_QCFLAG_SINGLE; - memset(&qc->sgent, 0, sizeof(qc->sgent)); qc->sg = &qc->sgent; qc->n_elem = 1; qc->buf_virt = buf; - - sg = qc->sg; - sg->page = virt_to_page(buf); - sg->offset = (unsigned long) buf & ~PAGE_MASK; - sg->length = buflen; + sg_init_one(qc->sg, buf, buflen); } /** @@ -2399,7 +2663,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) * None. (grabs host lock) */ -void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) +void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) { struct ata_port *ap = qc->ap; unsigned long flags; @@ -2407,38 +2671,38 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) spin_lock_irqsave(&ap->host_set->lock, flags); ap->flags &= ~ATA_FLAG_NOINTR; ata_irq_on(ap); - ata_qc_complete(qc, drv_stat); + ata_qc_complete(qc, err_mask); spin_unlock_irqrestore(&ap->host_set->lock, flags); } /** * ata_pio_poll - - * @ap: + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) * * RETURNS: - * + * timeout value to use */ static unsigned long ata_pio_poll(struct ata_port *ap) { u8 status; - unsigned int poll_state = PIO_ST_UNKNOWN; - unsigned int reg_state = PIO_ST_UNKNOWN; - const unsigned int tmout_state = PIO_ST_TMOUT; - - switch (ap->pio_task_state) { - case PIO_ST: - case PIO_ST_POLL: - poll_state = PIO_ST_POLL; - reg_state = PIO_ST; + unsigned int poll_state = HSM_ST_UNKNOWN; + unsigned int reg_state = HSM_ST_UNKNOWN; + const unsigned int tmout_state = HSM_ST_TMOUT; + + switch (ap->hsm_task_state) { + case HSM_ST: + case HSM_ST_POLL: + poll_state = HSM_ST_POLL; + reg_state = HSM_ST; break; - case PIO_ST_LAST: - case PIO_ST_LAST_POLL: - poll_state = PIO_ST_LAST_POLL; - reg_state = PIO_ST_LAST; + case HSM_ST_LAST: + case HSM_ST_LAST_POLL: + poll_state = HSM_ST_LAST_POLL; + reg_state = HSM_ST_LAST; break; default: BUG(); @@ -2448,20 +2712,20 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - ap->pio_task_state = tmout_state; + ap->hsm_task_state = tmout_state; return 0; } - ap->pio_task_state = poll_state; + ap->hsm_task_state = poll_state; return ATA_SHORT_PAUSE; } - ap->pio_task_state = reg_state; + ap->hsm_task_state = reg_state; return 0; } /** - * ata_pio_complete - - * @ap: + * ata_pio_complete - check if drive is busy or idle + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2480,14 +2744,14 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { msleep(2); drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { - ap->pio_task_state = PIO_ST_LAST_POLL; + ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; } @@ -2495,16 +2759,16 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return 0; } qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; - ata_poll_qc_complete(qc, drv_stat); + ata_poll_qc_complete(qc, 0); /* another command may start at this point */ @@ -2513,7 +2777,7 @@ static int ata_pio_complete (struct ata_port *ap) /** - * swap_buf_le16 - + * swap_buf_le16 - swap halves of 16-words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -2522,6 +2786,7 @@ static int ata_pio_complete (struct ata_port *ap) * vice-versa. * * LOCKING: + * Inherited from caller. */ void swap_buf_le16(u16 *buf, unsigned int buf_words) { @@ -2544,7 +2809,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) * * LOCKING: * Inherited from caller. - * */ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2590,7 +2854,6 @@ static void ata_mmio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2630,7 +2893,6 @@ static void ata_pio_data_xfer(struct ata_port *ap, unsigned char *buf, * * LOCKING: * Inherited from caller. - * */ static void ata_data_xfer(struct ata_port *ap, unsigned char *buf, @@ -2662,7 +2924,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned char *buf; if (qc->cursect == (qc->nsect - 1)) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; @@ -2712,7 +2974,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int offset, count; if (qc->curbytes + bytes >= qc->nbytes) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; next_sg: if (unlikely(qc->cursg >= qc->n_elem)) { @@ -2734,7 +2996,7 @@ next_sg: for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2783,7 +3045,6 @@ next_sg: * * LOCKING: * Inherited from caller. - * */ static void atapi_pio_bytes(struct ata_queued_cmd *qc) @@ -2815,12 +3076,12 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; } /** - * ata_pio_sector - - * @ap: + * ata_pio_block - start PIO on a block + * @ap: the target ata_port * * LOCKING: * None. (executing in kernel thread context) @@ -2832,19 +3093,19 @@ static void ata_pio_block(struct ata_port *ap) u8 status; /* - * This is purely hueristic. This is a fast path. + * This is purely heuristic. This is a fast path. * Sometimes when we enter, BSY will be cleared in * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then * chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->pio_task_state = PIO_ST_POLL; + ap->hsm_task_state = HSM_ST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return; } @@ -2856,7 +3117,7 @@ static void ata_pio_block(struct ata_port *ap) if (is_atapi_taskfile(&qc->tf)) { /* no more data to transfer or unsupported ATAPI command */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2864,7 +3125,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return; } @@ -2875,18 +3136,15 @@ static void ata_pio_block(struct ata_port *ap) static void ata_pio_error(struct ata_port *ap) { struct ata_queued_cmd *qc; - u8 drv_stat; + + printk(KERN_WARNING "ata%u: PIO error\n", ap->id); qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - drv_stat = ata_chk_status(ap); - printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n", - ap->id, drv_stat); - - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; - ata_poll_qc_complete(qc, drv_stat | ATA_ERR); + ata_poll_qc_complete(qc, AC_ERR_ATA_BUS); } static void ata_pio_task(void *_data) @@ -2899,25 +3157,25 @@ fsm_start: timeout = 0; qc_completed = 0; - switch (ap->pio_task_state) { - case PIO_ST_IDLE: + switch (ap->hsm_task_state) { + case HSM_ST_IDLE: return; - case PIO_ST: + case HSM_ST: ata_pio_block(ap); break; - case PIO_ST_LAST: + case HSM_ST_LAST: qc_completed = ata_pio_complete(ap); break; - case PIO_ST_POLL: - case PIO_ST_LAST_POLL: + case HSM_ST_POLL: + case HSM_ST_LAST_POLL: timeout = ata_pio_poll(ap); break; - case PIO_ST_TMOUT: - case PIO_ST_ERR: + case HSM_ST_TMOUT: + case HSM_ST_ERR: ata_pio_error(ap); return; } @@ -2928,52 +3186,6 @@ fsm_start: goto fsm_start; } -static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) -{ - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - DPRINTK("ATAPI request sense\n"); - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, ap->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -3055,7 +3267,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) ap->id, qc->tf.command, drv_stat, host_stat); /* complete taskfile transaction */ - ata_qc_complete(qc, drv_stat); + ata_qc_complete(qc, ac_err_mask(drv_stat)); break; } @@ -3091,14 +3303,14 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("ENTER\n"); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { + if (qc) + ata_qc_timeout(qc); + else { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); goto out; } - ata_qc_timeout(qc); - out: DPRINTK("EXIT\n"); } @@ -3155,15 +3367,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, qc->nbytes = qc->curbytes = 0; ata_tf_init(ap, &qc->tf, dev->devno); - - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; } return qc; } -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) +int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask) { return 0; } @@ -3201,7 +3410,6 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ void ata_qc_free(struct ata_queued_cmd *qc) { @@ -3221,10 +3429,9 @@ void ata_qc_free(struct ata_queued_cmd *qc) * * LOCKING: * spin_lock_irqsave(host_set lock) - * */ -void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) +void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask) { int rc; @@ -3241,7 +3448,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) qc->flags &= ~ATA_QCFLAG_ACTIVE; /* call completion callback */ - rc = qc->complete_fn(qc, drv_stat); + rc = qc->complete_fn(qc, err_mask); /* if callback indicates not to complete command (non-zero), * return immediately @@ -3360,7 +3567,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ ata_qc_set_polling(qc); ata_tf_to_host_nolock(ap, &qc->tf); - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); break; @@ -3586,7 +3793,7 @@ u8 ata_bmdma_status(struct ata_port *ap) void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; host_stat = readb(mmio + ATA_DMA_STATUS); } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); return host_stat; } @@ -3679,7 +3886,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->ops->irq_clear(ap); /* complete taskfile transaction */ - ata_qc_complete(qc, status); + ata_qc_complete(qc, ac_err_mask(status)); break; default: @@ -3715,7 +3922,6 @@ idle_irq: * * RETURNS: * IRQ_NONE or IRQ_HANDLED. - * */ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) @@ -3775,7 +3981,7 @@ static void atapi_packet_task(void *_data) /* sleep-wait for BSY to clear */ DPRINTK("busy wait\n"); if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) - goto err_out; + goto err_out_status; /* make sure DRQ is set */ status = ata_chk_status(ap); @@ -3806,14 +4012,16 @@ static void atapi_packet_task(void *_data) ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); /* PIO commands are handled by polling */ - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); } return; +err_out_status: + status = ata_chk_status(ap); err_out: - ata_poll_qc_complete(qc, ATA_ERR); + ata_poll_qc_complete(qc, __ac_err_mask(status)); } @@ -3827,6 +4035,7 @@ err_out: * May be used as the port_start() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ int ata_port_start (struct ata_port *ap) @@ -3852,6 +4061,7 @@ int ata_port_start (struct ata_port *ap) * May be used as the port_stop() entry in ata_port_operations. * * LOCKING: + * Inherited from caller. */ void ata_port_stop (struct ata_port *ap) @@ -3874,6 +4084,7 @@ void ata_host_stop (struct ata_host_set *host_set) * @do_unregister: 1 if we fully unregister, 0 to just stop the port * * LOCKING: + * Inherited from caller. */ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) @@ -3901,12 +4112,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) * * LOCKING: * Inherited from caller. - * */ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, struct ata_host_set *host_set, - struct ata_probe_ent *ent, unsigned int port_no) + const struct ata_probe_ent *ent, unsigned int port_no) { unsigned int i; @@ -3962,10 +4172,9 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, * * RETURNS: * New ata_port on success, for NULL on error. - * */ -static struct ata_port * ata_host_add(struct ata_probe_ent *ent, +static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, struct ata_host_set *host_set, unsigned int port_no) { @@ -4010,10 +4219,9 @@ err_out: * * RETURNS: * Number of ports registered. Zero on error (no ports registered). - * */ -int ata_device_add(struct ata_probe_ent *ent) +int ata_device_add(const struct ata_probe_ent *ent) { unsigned int count = 0, i; struct device *dev = ent->dev; @@ -4021,11 +4229,10 @@ int ata_device_add(struct ata_probe_ent *ent) DPRINTK("ENTER\n"); /* alloc a container for our list of ATA ports (buses) */ - host_set = kmalloc(sizeof(struct ata_host_set) + + host_set = kzalloc(sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *)), GFP_KERNEL); if (!host_set) return 0; - memset(host_set, 0, sizeof(struct ata_host_set) + (ent->n_ports * sizeof(void *))); spin_lock_init(&host_set->lock); host_set->dev = dev; @@ -4065,10 +4272,8 @@ int ata_device_add(struct ata_probe_ent *ent) count++; } - if (!count) { - kfree(host_set); - return 0; - } + if (!count) + goto err_free_ret; /* obtain irq, that is shared between channels */ if (request_irq(ent->irq, ent->port_ops->irq_handler, ent->irq_flags, @@ -4113,7 +4318,7 @@ int ata_device_add(struct ata_probe_ent *ent) for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; - scsi_scan_host(ap->host); + ata_scsi_scan_host(ap); } dev_set_drvdata(dev, host_set); @@ -4126,6 +4331,7 @@ err_out: ata_host_remove(host_set->ports[i], 1); scsi_host_put(host_set->ports[i]->host); } +err_free_ret: kfree(host_set); VPRINTK("EXIT, returning 0\n"); return 0; @@ -4142,7 +4348,6 @@ err_out: * Inherited from calling layer (may sleep). */ - void ata_host_set_remove(struct ata_host_set *host_set) { struct ata_port *ap; @@ -4232,19 +4437,17 @@ void ata_std_ports(struct ata_ioports *ioaddr) } static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port) +ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) { struct ata_probe_ent *probe_ent; - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); if (!probe_ent) { printk(KERN_ERR DRV_NAME "(%s): out of memory\n", kobject_name(&(dev->kobj))); return NULL; } - memset(probe_ent, 0, sizeof(*probe_ent)); - INIT_LIST_HEAD(&probe_ent->node); probe_ent->dev = dev; @@ -4273,85 +4476,86 @@ void ata_pci_host_stop (struct ata_host_set *host_set) * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present * * Utility function which allocates and initializes an * ata_probe_ent structure for a standard dual-port * PIO-based IDE controller. The returned ata_probe_ent * structure can be passed to ata_device_add(). The returned * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. */ struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) { struct ata_probe_ent *probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + if (!probe_ent) return NULL; - probe_ent->n_ports = 2; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8; + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } - ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent->port[1]); + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + probe_ent->n_ports = p; return probe_ent; } -static struct ata_probe_ent * -ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, - struct ata_probe_ent **ppe2) +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num) { - struct ata_probe_ent *probe_ent, *probe_ent2; + struct ata_probe_ent *probe_ent; - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); if (!probe_ent) return NULL; - probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]); - if (!probe_ent2) { - kfree(probe_ent); - return NULL; - } - - probe_ent->n_ports = 1; - probe_ent->irq = 14; - probe_ent->hard_port_no = 0; probe_ent->legacy_mode = 1; - - probe_ent2->n_ports = 1; - probe_ent2->irq = 15; - - probe_ent2->hard_port_no = 1; - probe_ent2->legacy_mode = 1; - - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent2->port[0].cmd_addr = 0x170; - probe_ent2->port[0].altstatus_addr = - probe_ent2->port[0].ctl_addr = 0x376; - probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8; - + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; + + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent2->port[0]); - - *ppe2 = probe_ent2; return probe_ent; } @@ -4374,13 +4578,12 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, * * RETURNS: * Zero on success, negative on errno-based value on error. - * */ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -4397,7 +4600,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: support transitioning to native mode? */ + /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) @@ -4405,11 +4608,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* FIXME... */ - if ((!legacy_mode) && (n_ports > 1)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n"); - return -EINVAL; + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ } + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + rc = pci_enable_device(pdev); if (rc) return rc; @@ -4420,6 +4632,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } + /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { if (!request_region(0x1f0, 8, "libata")) { struct resource *conflict, res; @@ -4464,10 +4677,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2); - } else - probe_ent = ata_pci_init_native_mode(pdev, port); - if (!probe_ent) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { rc = -ENOMEM; goto err_out_regions; } @@ -4505,7 +4725,7 @@ err_out: * @pdev: PCI device that was removed * * PCI layer indicates to libata via this hook that - * hot-unplug or module unload event has occured. + * hot-unplug or module unload event has occurred. * Handle this by unregistering all objects associated * with this PCI device. Free those objects. Then finally * release PCI resources and disable device. @@ -4526,7 +4746,7 @@ void ata_pci_remove_one (struct pci_dev *pdev) } /* move to PCI subsystem */ -int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits) +int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) { unsigned long tmp = 0; @@ -4579,6 +4799,27 @@ static void __exit ata_exit(void) module_init(ata_init); module_exit(ata_exit); +static unsigned long ratelimit_time; +static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4603,7 +4844,6 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis); EXPORT_SYMBOL_GPL(ata_tf_from_fis); EXPORT_SYMBOL_GPL(ata_check_status); EXPORT_SYMBOL_GPL(ata_altstatus); -EXPORT_SYMBOL_GPL(ata_chk_err); EXPORT_SYMBOL_GPL(ata_exec_command); EXPORT_SYMBOL_GPL(ata_port_start); EXPORT_SYMBOL_GPL(ata_port_stop); @@ -4620,6 +4860,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); @@ -4631,6 +4872,9 @@ EXPORT_SYMBOL_GPL(ata_dev_id_string); EXPORT_SYMBOL_GPL(ata_dev_config); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_timing_compute); +EXPORT_SYMBOL_GPL(ata_timing_merge); + #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_host_stop); |