diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00')
26 files changed, 1990 insertions, 1988 deletions
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 2d611876bbe0..d485a86bba75 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -5,12 +5,16 @@ config RT2X00 This will enable the experimental support for the Ralink drivers, developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. - These drivers will make use of the mac80211 stack. + These drivers make use of the mac80211 stack. When building one of the individual drivers, the rt2x00 library will also be created. That library (when the driver is built as a module) will be called "rt2x00lib.ko". + Additionally PCI and USB libraries will also be build depending + on the types of drivers being selected, these libraries will be + called "rt2x00pci.ko" and "rt2x00usb.ko". + if RT2X00 config RT2X00_LIB @@ -32,35 +36,34 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB - depends on INPUT select RFKILL - select INPUT_POLLDEV config RT2X00_LIB_LEDS boolean depends on RT2X00_LIB && NEW_LEDS config RT2400PCI - tristate "Ralink rt2400 pci/pcmcia support" + tristate "Ralink rt2400 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt2400 wireless chip. + This adds support for rt2400 wireless chipset family. + Supported chips: RT2460. When compiled as a module, this driver will be called "rt2400pci.ko". config RT2400PCI_RFKILL - bool "RT2400 rfkill support" - depends on RT2400PCI && INPUT + bool "Ralink rt2400 rfkill support" + depends on RT2400PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt2400 devices that feature a + This adds support for integrated rt2400 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT2400PCI_LEDS - bool "RT2400 leds support" + bool "Ralink rt2400 leds support" depends on RT2400PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS @@ -68,26 +71,27 @@ config RT2400PCI_LEDS This adds support for led triggers provided my mac80211. config RT2500PCI - tristate "Ralink rt2500 pci/pcmcia support" + tristate "Ralink rt2500 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt2500 wireless chip. + This adds support for rt2500 wireless chipset family. + Supported chips: RT2560. When compiled as a module, this driver will be called "rt2500pci.ko". config RT2500PCI_RFKILL - bool "RT2500 rfkill support" - depends on RT2500PCI && INPUT + bool "Ralink rt2500 rfkill support" + depends on RT2500PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt2500 devices that feature a + This adds support for integrated rt2500 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT2500PCI_LEDS - bool "RT2500 leds support" + bool "Ralink rt2500 leds support" depends on RT2500PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS @@ -95,28 +99,29 @@ config RT2500PCI_LEDS This adds support for led triggers provided my mac80211. config RT61PCI - tristate "Ralink rt61 pci/pcmcia support" + tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" depends on PCI select RT2X00_LIB_PCI select RT2X00_LIB_FIRMWARE select CRC_ITU_T select EEPROM_93CX6 ---help--- - This is an experimental driver for the Ralink rt61 wireless chip. + This adds support for rt2501 wireless chipset family. + Supported chips: RT2561, RT2561S & RT2661. When compiled as a module, this driver will be called "rt61pci.ko". config RT61PCI_RFKILL - bool "RT61 rfkill support" - depends on RT61PCI && INPUT + bool "Ralink rt2501/rt61 rfkill support" + depends on RT61PCI select RT2X00_LIB_RFKILL ---help--- - This adds support for integrated rt61 devices that feature a + This adds support for integrated rt61 hardware that features a hardware button to control the radio state. This feature depends on the RF switch subsystem rfkill. config RT61PCI_LEDS - bool "RT61 leds support" + bool "Ralink rt2501/rt61 leds support" depends on RT61PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS @@ -124,16 +129,17 @@ config RT61PCI_LEDS This adds support for led triggers provided my mac80211. config RT2500USB - tristate "Ralink rt2500 usb support" + tristate "Ralink rt2500 (USB) support" depends on USB select RT2X00_LIB_USB ---help--- - This is an experimental driver for the Ralink rt2500 wireless chip. + This adds support for rt2500 wireless chipset family. + Supported chips: RT2571 & RT2572. When compiled as a module, this driver will be called "rt2500usb.ko". config RT2500USB_LEDS - bool "RT2500 leds support" + bool "Ralink rt2500 leds support" depends on RT2500USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS @@ -141,18 +147,19 @@ config RT2500USB_LEDS This adds support for led triggers provided my mac80211. config RT73USB - tristate "Ralink rt73 usb support" + tristate "Ralink rt2501/rt73 (USB) support" depends on USB select RT2X00_LIB_USB select RT2X00_LIB_FIRMWARE select CRC_ITU_T ---help--- - This is an experimental driver for the Ralink rt73 wireless chip. + This adds support for rt2501 wireless chipset family. + Supported chips: RT2571W, RT2573 & RT2671. When compiled as a module, this driver will be called "rt73usb.ko". config RT73USB_LEDS - bool "RT73 leds support" + bool "Ralink rt2501/rt73 leds support" depends on RT73USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS @@ -165,7 +172,7 @@ config RT2X00_LIB_DEBUGFS ---help--- Enable creation of debugfs files for the rt2x00 drivers. These debugfs files support both reading and writing of the - most important register types of the rt2x00 devices. + most important register types of the rt2x00 hardware. config RT2X00_DEBUG bool "Ralink debug output" diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index b36ed1c6c746..4c0538d6099b 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -277,6 +277,17 @@ static int rt2400pci_blink_set(struct led_classdev *led_cdev, return 0; } + +static void rt2400pci_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2400pci_brightness_set; + led->led_dev.blink_set = rt2400pci_blink_set; + led->flags = LED_INITIALIZED; +} #endif /* CONFIG_RT2400PCI_LEDS */ /* @@ -620,48 +631,38 @@ static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev) static void rt2400pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(priv_rx->desc, 2, &word); - rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, - entry->queue->data_size); - rt2x00_desc_write(priv_rx->desc, 2, word); + rt2x00_desc_read(entry_priv->desc, 2, &word); + rt2x00_set_field32(&word, RXD_W2_BUFFER_LENGTH, entry->skb->len); + rt2x00_desc_write(entry_priv->desc, 2, word); - rt2x00_desc_read(priv_rx->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma); - rt2x00_desc_write(priv_rx->desc, 1, word); + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); - rt2x00_desc_read(priv_rx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(priv_rx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static void rt2400pci_init_txentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word; - rt2x00_desc_read(priv_tx->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma); - rt2x00_desc_write(priv_tx->desc, 1, word); - - rt2x00_desc_read(priv_tx->desc, 2, &word); - rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, - entry->queue->data_size); - rt2x00_desc_write(priv_tx->desc, 2, word); - - rt2x00_desc_read(priv_tx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(priv_tx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; u32 reg; /* @@ -674,28 +675,28 @@ static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); - priv_tx = rt2x00dev->tx[1].entries[0].priv_data; + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); - priv_tx = rt2x00dev->tx[0].entries[0].priv_data; + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); - priv_tx = rt2x00dev->bcn[1].entries[0].priv_data; + entry_priv = rt2x00dev->bcn[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); - priv_tx = rt2x00dev->bcn[0].entries[0].priv_data; + entry_priv = rt2x00dev->bcn[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); @@ -703,9 +704,10 @@ static int rt2400pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); - priv_rx = rt2x00dev->rx->entries[0].priv_data; + entry_priv = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); return 0; @@ -801,25 +803,32 @@ static int rt2400pci_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt2400pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; - u8 reg_id; u8 value; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2400pci_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2400pci_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt2400pci_bbp_write(rt2x00dev, 1, 0x00); rt2400pci_bbp_write(rt2x00dev, 3, 0x27); rt2400pci_bbp_write(rt2x00dev, 4, 0x08); @@ -858,7 +867,8 @@ static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); rt2x00_set_field32(®, RXCSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); } @@ -895,17 +905,10 @@ static int rt2400pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt2400pci_init_queues(rt2x00dev) || - rt2400pci_init_registers(rt2x00dev) || - rt2400pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt2400pci_init_queues(rt2x00dev) || + rt2400pci_init_registers(rt2x00dev) || + rt2400pci_init_bbp(rt2x00dev))) return -EIO; - } - - /* - * Enable interrupts. - */ - rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); return 0; } @@ -927,11 +930,6 @@ static void rt2400pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); rt2x00_set_field32(®, TXCSR0_ABORT, 1); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); - - /* - * Disable interrupts. - */ - rt2400pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); } static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -966,10 +964,6 @@ static int rt2400pci_set_state(struct rt2x00_dev *rt2x00dev, msleep(10); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - return -EBUSY; } @@ -987,11 +981,13 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt2400pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2400pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt2400pci_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1004,6 +1000,10 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1012,18 +1012,23 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; __le32 *txd = skbdesc->desc; u32 word; /* * Start writing the descriptor words. */ + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); + rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, skb->len); + rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skb->len); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 3, &word); @@ -1057,20 +1062,53 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); rt2x00_desc_write(txd, 0, word); } /* * TX data initialization */ +static void rt2400pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u32 word; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + + /* + * Replace rt2x00lib allocated descriptor with the + * pointer to the _real_ hardware descriptor. + * After that, map the beacon to DMA and update the + * descriptor. + */ + memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len); + skbdesc->desc = entry_priv->desc; + + rt2x00queue_map_txskb(rt2x00dev, entry->skb); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); +} + static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); @@ -1082,12 +1120,9 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == RT2X00_BCN_QUEUE_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } @@ -1097,32 +1132,54 @@ static void rt2400pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2400pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word2; u32 word3; + u32 word4; + u64 tsf; + u32 rx_low; + u32 rx_high; - rt2x00_desc_read(priv_rx->desc, 0, &word0); - rt2x00_desc_read(priv_rx->desc, 2, &word2); - rt2x00_desc_read(priv_rx->desc, 3, &word3); + rt2x00_desc_read(entry_priv->desc, 0, &word0); + rt2x00_desc_read(entry_priv->desc, 2, &word2); + rt2x00_desc_read(entry_priv->desc, 3, &word3); + rt2x00_desc_read(entry_priv->desc, 4, &word4); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC; /* + * We only get the lower 32bits from the timestamp, + * to get the full 64bits we must complement it with + * the timestamp from get_tsf(). + * Note that when a wraparound of the lower 32bits + * has occurred between the frame arrival and the get_tsf() + * call, we must decrease the higher 32bits with 1 to get + * to correct value. + */ + tsf = rt2x00dev->ops->hw->get_tsf(rt2x00dev->hw); + rx_low = rt2x00_get_field32(word4, RXD_W4_RX_END_TIME); + rx_high = upper_32_bits(tsf); + + if ((u32)tsf <= rx_low) + rx_high--; + + /* * Obtain the status about this packet. * The signal is the PLCP value, and needs to be stripped * of the preamble bit (0x08). */ + rxdesc->timestamp = ((u64)rx_high << 32) | rx_low; rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL) & ~0x08; rxdesc->rssi = rt2x00_get_field32(word2, RXD_W3_RSSI) - entry->queue->rt2x00dev->rssi_offset; rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = RXDONE_SIGNAL_PLCP; + rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; } @@ -1131,18 +1188,18 @@ static void rt2400pci_fill_rxdone(struct queue_entry *entry, * Interrupt functions. */ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum ieee80211_tx_queue queue_idx) + const enum data_queue_qid queue_idx) { struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; struct queue_entry *entry; struct txdone_entry_desc txdesc; u32 word; while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - priv_tx = entry->priv_data; - rt2x00_desc_read(priv_tx->desc, 0, &word); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1151,10 +1208,21 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev, /* * Obtain the status about this packet. */ - txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT); + txdesc.flags = 0; + switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { + case 0: /* Success */ + case 1: /* Success with retry */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + break; + case 2: /* Failure, excessive retries */ + __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); + /* Don't break, this is a failed frame! */ + default: /* Failure */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1198,19 +1266,19 @@ static irqreturn_t rt2400pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2400pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + rt2400pci_txdone(rt2x00dev, QID_ATIM); /* * 4 - Priority ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2400pci_txdone(rt2x00dev, QID_AC_BE); /* * 5 - Tx ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2400pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2400pci_txdone(rt2x00dev, QID_AC_BK); return IRQ_HANDLED; } @@ -1309,23 +1377,10 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev) #ifdef CONFIG_RT2400PCI_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt2400pci_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt2400pci_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - if (value == LED_MODE_TXRX_ACTIVITY) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt2400pci_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt2400pci_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + if (value == LED_MODE_TXRX_ACTIVITY) + rt2400pci_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2400PCI_LEDS */ /* @@ -1375,13 +1430,11 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize all hw fields. */ - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1427,9 +1480,10 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2400pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1456,8 +1510,7 @@ static int rt2400pci_set_retry_limit(struct ieee80211_hw *hw, return 0; } -static int rt2400pci_conf_tx(struct ieee80211_hw *hw, - int queue, +static int rt2400pci_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -1467,7 +1520,7 @@ static int rt2400pci_conf_tx(struct ieee80211_hw *hw, * per queue. So by default we only configure the TX queue, * and ignore all other configurations. */ - if (queue != IEEE80211_TX_QUEUE_DATA0) + if (queue != 0) return -EINVAL; if (rt2x00mac_conf_tx(hw, queue, params)) @@ -1496,60 +1549,6 @@ static u64 rt2400pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static int rt2400pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct queue_entry_priv_pci_tx *priv_tx; - struct skb_frame_desc *skbdesc; - u32 reg; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - priv_tx = intf->beacon->priv_data; - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data; - skbdesc->data_len = skb->len; - skbdesc->desc = priv_tx->desc; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); - - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * Enable beacon generation. - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - memcpy(priv_tx->data, skb->data, skb->len); - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} - static int rt2400pci_tx_last_beacon(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -1574,7 +1573,6 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = { .conf_tx = rt2400pci_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt2400pci_get_tsf, - .beacon_update = rt2400pci_beacon_update, .tx_last_beacon = rt2400pci_tx_last_beacon, }; @@ -1592,6 +1590,7 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = { .link_tuner = rt2400pci_link_tuner, .write_tx_desc = rt2400pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt2400pci_write_beacon, .kick_tx_queue = rt2400pci_kick_tx_queue, .fill_rxdone = rt2400pci_fill_rxdone, .config_filter = rt2400pci_config_filter, @@ -1604,28 +1603,28 @@ static const struct data_queue_desc rt2400pci_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_rx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2400pci_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2400pci_queue_bcn = { .entry_num = BEACON_ENTRIES, .data_size = MGMT_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2400pci_queue_atim = { .entry_num = ATIM_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct rt2x00_ops rt2400pci_ops = { @@ -1634,6 +1633,7 @@ static const struct rt2x00_ops rt2400pci_ops = { .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt2400pci_queue_rx, .tx = &rt2400pci_queue_tx, .bcn = &rt2400pci_queue_bcn, diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index a5210f9a3360..bc5564258228 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -37,8 +37,6 @@ * Signal information. * Defaul offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 100 /* @@ -52,6 +50,11 @@ #define RF_SIZE 0x0010 /* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 2 + +/* * Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index f7731fb82555..aa6dfb811c71 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -277,6 +277,17 @@ static int rt2500pci_blink_set(struct led_classdev *led_cdev, return 0; } + +static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2500pci_brightness_set; + led->led_dev.blink_set = rt2500pci_blink_set; + led->flags = LED_INITIALIZED; +} #endif /* CONFIG_RT2500PCI_LEDS */ /* @@ -317,8 +328,7 @@ static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00intf_conf *conf, const unsigned int flags) { - struct data_queue *queue = - rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON); unsigned int bcn_preload; u32 reg; @@ -716,38 +726,34 @@ dynamic_cca_tune: static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(priv_rx->desc, 1, &word); - rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma); - rt2x00_desc_write(priv_rx->desc, 1, word); + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); - rt2x00_desc_read(priv_rx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(priv_rx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word; - rt2x00_desc_read(priv_tx->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma); - rt2x00_desc_write(priv_tx->desc, 1, word); - - rt2x00_desc_read(priv_tx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(priv_tx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; u32 reg; /* @@ -760,28 +766,28 @@ static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit); rt2x00pci_register_write(rt2x00dev, TXCSR2, reg); - priv_tx = rt2x00dev->tx[1].entries[0].priv_data; + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR3, ®); rt2x00_set_field32(®, TXCSR3_TX_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR3, reg); - priv_tx = rt2x00dev->tx[0].entries[0].priv_data; + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR5, ®); rt2x00_set_field32(®, TXCSR5_PRIO_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR5, reg); - priv_tx = rt2x00dev->bcn[1].entries[0].priv_data; + entry_priv = rt2x00dev->bcn[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR4, ®); rt2x00_set_field32(®, TXCSR4_ATIM_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR4, reg); - priv_tx = rt2x00dev->bcn[0].entries[0].priv_data; + entry_priv = rt2x00dev->bcn[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, TXCSR6, ®); rt2x00_set_field32(®, TXCSR6_BEACON_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, TXCSR6, reg); rt2x00pci_register_read(rt2x00dev, RXCSR1, ®); @@ -789,9 +795,10 @@ static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RXCSR1_NUM_RXD, rt2x00dev->rx->limit); rt2x00pci_register_write(rt2x00dev, RXCSR1, reg); - priv_rx = rt2x00dev->rx->entries[0].priv_data; + entry_priv = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RXCSR2, ®); - rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma); + rt2x00_set_field32(®, RXCSR2_RX_RING_REGISTER, + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, RXCSR2, reg); return 0; @@ -940,25 +947,32 @@ static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; - u8 reg_id; u8 value; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2500pci_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt2500pci_bbp_write(rt2x00dev, 3, 0x02); rt2500pci_bbp_write(rt2x00dev, 4, 0x19); rt2500pci_bbp_write(rt2x00dev, 14, 0x1c); @@ -1013,7 +1027,8 @@ static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, RXCSR0, ®); rt2x00_set_field32(®, RXCSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt2x00pci_register_write(rt2x00dev, RXCSR0, reg); } @@ -1050,17 +1065,10 @@ static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt2500pci_init_queues(rt2x00dev) || - rt2500pci_init_registers(rt2x00dev) || - rt2500pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt2500pci_init_queues(rt2x00dev) || + rt2500pci_init_registers(rt2x00dev) || + rt2500pci_init_bbp(rt2x00dev))) return -EIO; - } - - /* - * Enable interrupts. - */ - rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); return 0; } @@ -1082,11 +1090,6 @@ static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); rt2x00_set_field32(®, TXCSR0_ABORT, 1); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); - - /* - * Disable interrupts. - */ - rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); } static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, @@ -1121,10 +1124,6 @@ static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev, msleep(10); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - return -EBUSY; } @@ -1142,11 +1141,13 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2500pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt2500pci_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1159,6 +1160,10 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1167,16 +1172,20 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + struct queue_entry_priv_pci *entry_priv = skbdesc->entry->priv_data; __le32 *txd = skbdesc->desc; u32 word; /* * Start writing the descriptor words. */ + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); + rt2x00_desc_read(txd, 2, &word); rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs); @@ -1210,9 +1219,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } @@ -1220,12 +1227,46 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ +static void rt2500pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u32 word; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, CSR14, ®); + rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); + rt2x00_set_field32(®, CSR14_TBCN, 0); + rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, CSR14, reg); + + /* + * Replace rt2x00lib allocated descriptor with the + * pointer to the _real_ hardware descriptor. + * After that, map the beacon to DMA and update the + * descriptor. + */ + memcpy(entry_priv->desc, skbdesc->desc, skbdesc->desc_len); + skbdesc->desc = entry_priv->desc; + + rt2x00queue_map_txskb(rt2x00dev, entry->skb); + + rt2x00_desc_read(entry_priv->desc, 1, &word); + rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 1, word); +} + static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { rt2x00pci_register_read(rt2x00dev, CSR14, ®); if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) { rt2x00_set_field32(®, CSR14_TSF_COUNT, 1); @@ -1237,12 +1278,9 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TXCSR0, ®); - rt2x00_set_field32(®, TXCSR0_KICK_PRIO, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TXCSR0_KICK_TX, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TXCSR0_KICK_ATIM, - (queue == RT2X00_BCN_QUEUE_ATIM)); + rt2x00_set_field32(®, TXCSR0_KICK_PRIO, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TXCSR0_KICK_TX, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TXCSR0_KICK_ATIM, (queue == QID_ATIM)); rt2x00pci_register_write(rt2x00dev, TXCSR0, reg); } @@ -1252,14 +1290,13 @@ static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2500pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word2; - rt2x00_desc_read(priv_rx->desc, 0, &word0); - rt2x00_desc_read(priv_rx->desc, 2, &word2); + rt2x00_desc_read(entry_priv->desc, 0, &word0); + rt2x00_desc_read(entry_priv->desc, 2, &word2); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) @@ -1276,7 +1313,6 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, entry->queue->rt2x00dev->rssi_offset; rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = 0; if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) @@ -1287,18 +1323,18 @@ static void rt2500pci_fill_rxdone(struct queue_entry *entry, * Interrupt functions. */ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, - const enum ieee80211_tx_queue queue_idx) + const enum data_queue_qid queue_idx) { struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx); - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; struct queue_entry *entry; struct txdone_entry_desc txdesc; u32 word; while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - priv_tx = entry->priv_data; - rt2x00_desc_read(priv_tx->desc, 0, &word); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1307,10 +1343,21 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev, /* * Obtain the status about this packet. */ - txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT); + txdesc.flags = 0; + switch (rt2x00_get_field32(word, TXD_W0_RESULT)) { + case 0: /* Success */ + case 1: /* Success with retry */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + break; + case 2: /* Failure, excessive retries */ + __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); + /* Don't break, this is a failed frame! */ + default: /* Failure */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + } txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1354,19 +1401,19 @@ static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance) * 3 - Atim ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING)) - rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + rt2500pci_txdone(rt2x00dev, QID_ATIM); /* * 4 - Priority ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0); + rt2500pci_txdone(rt2x00dev, QID_AC_BE); /* * 5 - Tx ring transmit done interrupt. */ if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) - rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1); + rt2500pci_txdone(rt2x00dev, QID_AC_BK); return IRQ_HANDLED; } @@ -1486,23 +1533,10 @@ static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev) #ifdef CONFIG_RT2500PCI_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt2500pci_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt2500pci_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - if (value == LED_MODE_TXRX_ACTIVITY) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt2500pci_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt2500pci_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + if (value == LED_MODE_TXRX_ACTIVITY) + rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2500PCI_LEDS */ /* @@ -1695,13 +1729,12 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) /* * Initialize all hw fields. */ - rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; + rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1765,9 +1798,10 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt2500pci_probe_hw_mode(rt2x00dev); /* - * This device requires the atim queue + * This device requires the atim queue and DMA-mapped skbs. */ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -1808,61 +1842,6 @@ static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct queue_entry_priv_pci_tx *priv_tx; - struct skb_frame_desc *skbdesc; - u32 reg; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - priv_tx = intf->beacon->priv_data; - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data; - skbdesc->data_len = skb->len; - skbdesc->desc = priv_tx->desc; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00pci_register_read(rt2x00dev, CSR14, ®); - rt2x00_set_field32(®, CSR14_TSF_COUNT, 0); - rt2x00_set_field32(®, CSR14_TBCN, 0); - rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); - rt2x00pci_register_write(rt2x00dev, CSR14, reg); - - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * Enable beacon generation. - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - memcpy(priv_tx->data, skb->data, skb->len); - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} - static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -1887,7 +1866,6 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = { .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt2500pci_get_tsf, - .beacon_update = rt2500pci_beacon_update, .tx_last_beacon = rt2500pci_tx_last_beacon, }; @@ -1905,6 +1883,7 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = { .link_tuner = rt2500pci_link_tuner, .write_tx_desc = rt2500pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt2500pci_write_beacon, .kick_tx_queue = rt2500pci_kick_tx_queue, .fill_rxdone = rt2500pci_fill_rxdone, .config_filter = rt2500pci_config_filter, @@ -1917,28 +1896,28 @@ static const struct data_queue_desc rt2500pci_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_rx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2500pci_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2500pci_queue_bcn = { .entry_num = BEACON_ENTRIES, .data_size = MGMT_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt2500pci_queue_atim = { .entry_num = ATIM_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct rt2x00_ops rt2500pci_ops = { @@ -1947,6 +1926,7 @@ static const struct rt2x00_ops rt2500pci_ops = { .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt2500pci_queue_rx, .tx = &rt2500pci_queue_tx, .bcn = &rt2500pci_queue_bcn, diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h index 13899550465a..42f376929ea9 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.h +++ b/drivers/net/wireless/rt2x00/rt2500pci.h @@ -48,8 +48,6 @@ * Signal information. * Defaul offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 121 /* @@ -63,6 +61,11 @@ #define RF_SIZE 0x0014 /* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 2 + +/* * Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ @@ -748,7 +751,7 @@ #define LEDCSR_LED_DEFAULT FIELD32(0x00100000) /* - * AES control register. + * SECCSR3: AES control register. */ #define SECCSR3 0x00fc @@ -892,7 +895,7 @@ #define ARTCSR2_ACK_CTS_54MBS FIELD32(0xff000000) /* - * SECCSR1_RT2509: WEP control register. + * SECCSR1: WEP control register. * KICK_ENCRYPT: Kick encryption engine, self-clear. * ONE_SHOT: 0: ring mode, 1: One shot only mode. * DESC_ADDRESS: Descriptor physical address of frame. diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index d90512f97b39..3558cb210747 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -76,10 +76,10 @@ static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u16 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT16(length)); } static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, @@ -106,10 +106,10 @@ static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u16 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u16)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT16(length)); } static u16 rt2500usb_bbp_check(struct rt2x00_dev *rt2x00dev) @@ -322,6 +322,17 @@ static int rt2500usb_blink_set(struct led_classdev *led_cdev, return 0; } + +static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt2500usb_brightness_set; + led->led_dev.blink_set = rt2500usb_blink_set; + led->flags = LED_INITIALIZED; +} #endif /* CONFIG_RT2500USB_LEDS */ /* @@ -860,25 +871,32 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt2500usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; u8 value; - u8 reg_id; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2500usb_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 value; + u8 reg_id; + + if (unlikely(rt2500usb_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt2500usb_bbp_write(rt2x00dev, 3, 0x02); rt2500usb_bbp_write(rt2x00dev, 4, 0x19); rt2500usb_bbp_write(rt2x00dev, 14, 0x1c); @@ -934,7 +952,8 @@ static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®); rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg); } @@ -943,11 +962,9 @@ static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt2500usb_init_registers(rt2x00dev) || - rt2500usb_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt2500usb_init_registers(rt2x00dev) || + rt2500usb_init_bbp(rt2x00dev))) return -EIO; - } return 0; } @@ -1000,10 +1017,6 @@ static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev, msleep(30); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state: bbp %d and rf %d.\n", - state, bbp_state, rf_state); - return -EBUSY; } @@ -1021,11 +1034,13 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt2500usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt2500usb_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + /* No support, but no error either */ break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1038,6 +1053,10 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1046,8 +1065,7 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1071,7 +1089,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 0, &word); - rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit); + rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit); rt2x00_set_field32(&word, TXD_W0_MORE_FRAG, test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_ACK, @@ -1081,13 +1099,73 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_OFDM, test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, - !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT)); + test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, + skb->len - skbdesc->desc_len); rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } +/* + * TX data initialization + */ +static void rt2500usb_beacondone(struct urb *urb); + +static void rt2500usb_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); + struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + int pipe = usb_sndbulkpipe(usb_dev, 1); + int length; + u16 reg; + + /* + * Add the descriptor in front of the skb. + */ + skb_push(entry->skb, entry->queue->desc_size); + memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); + skbdesc->desc = entry->skb->data; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); + rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); + rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); + rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); + rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); + + /* + * USB devices cannot blindly pass the skb->len as the + * length of the data to usb_fill_bulk_urb. Pass the skb + * to the driver to determine what the length should be. + */ + length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); + + usb_fill_bulk_urb(bcn_priv->urb, usb_dev, pipe, + entry->skb->data, length, rt2500usb_beacondone, + entry); + + /* + * Second we need to create the guardian byte. + * We only need a single byte, so lets recycle + * the 'flags' field we are not using for beacons. + */ + bcn_priv->guardian_data = 0; + usb_fill_bulk_urb(bcn_priv->guardian_urb, usb_dev, pipe, + &bcn_priv->guardian_data, 1, rt2500usb_beacondone, + entry); + + /* + * Send out the guardian byte. + */ + usb_submit_urb(bcn_priv->guardian_urb, GFP_ATOMIC); +} + static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { @@ -1103,16 +1181,15 @@ static int rt2500usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, return length; } -/* - * TX data initialization - */ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u16 reg; - if (queue != RT2X00_BCN_QUEUE_BEACON) + if (queue != QID_BEACON) { + rt2x00usb_kick_tx_queue(rt2x00dev, queue); return; + } rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) { @@ -1138,30 +1215,28 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, static void rt2500usb_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)(entry->skb->data + - (priv_rx->urb->actual_length - entry->queue->desc_size)); - unsigned int offset = entry->queue->desc_size + 2; + (entry_priv->urb->actual_length - + entry->queue->desc_size)); u32 word0; u32 word1; /* - * Copy descriptor to the available headroom inside the skbuffer. + * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of + * frame data in rt2x00usb. */ - skb_push(entry->skb, offset); - memcpy(entry->skb->data, rxd, entry->queue->desc_size); - rxd = (__le32 *)entry->skb->data; + memcpy(skbdesc->desc, rxd, skbdesc->desc_len); + rxd = (__le32 *)skbdesc->desc; /* - * The descriptor is now aligned to 4 bytes and thus it is - * now safe to read it on all architectures. + * It is now safe to read the descriptor on all architectures. */ rt2x00_desc_read(rxd, 0, &word0); rt2x00_desc_read(rxd, 1, &word1); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR)) @@ -1178,7 +1253,6 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, entry->queue->rt2x00dev->rssi_offset; rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = 0; if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) @@ -1187,16 +1261,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, /* * Adjust the skb memory window to the frame boundaries. */ - skb_pull(entry->skb, offset); skb_trim(entry->skb, rxdesc->size); - - /* - * Set descriptor and data pointer. - */ - skbdesc->data = entry->skb->data; - skbdesc->data_len = rxdesc->size; - skbdesc->desc = rxd; - skbdesc->desc_len = entry->queue->desc_size; } /* @@ -1205,7 +1270,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry, static void rt2500usb_beacondone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; - struct queue_entry_priv_usb_bcn *priv_bcn = entry->priv_data; + struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data; if (!test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) return; @@ -1216,9 +1281,9 @@ static void rt2500usb_beacondone(struct urb *urb) * Otherwise we should free the sk_buffer, the device * should be doing the rest of the work now. */ - if (priv_bcn->guardian_urb == urb) { - usb_submit_urb(priv_bcn->urb, GFP_ATOMIC); - } else if (priv_bcn->urb == urb) { + if (bcn_priv->guardian_urb == urb) { + usb_submit_urb(bcn_priv->urb, GFP_ATOMIC); + } else if (bcn_priv->urb == urb) { dev_kfree_skb(entry->skb); entry->skb = NULL; } @@ -1397,23 +1462,10 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev) #ifdef CONFIG_RT2500USB_LEDS value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt2500usb_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt2500usb_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - if (value == LED_MODE_TXRX_ACTIVITY) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt2500usb_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt2500usb_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + if (value == LED_MODE_TXRX_ACTIVITY) + rt2500usb_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_ACTIVITY); #endif /* CONFIG_RT2500USB_LEDS */ /* @@ -1600,13 +1652,12 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00dev->hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; + rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 2; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1684,97 +1735,6 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) return 0; } -/* - * IEEE80211 stack callback functions. - */ -static int rt2500usb_beacon_update(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct queue_entry_priv_usb_bcn *priv_bcn; - struct skb_frame_desc *skbdesc; - int pipe = usb_sndbulkpipe(usb_dev, 1); - int length; - u16 reg; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - priv_bcn = intf->beacon->priv_data; - - /* - * Add the descriptor in front of the skb. - */ - skb_push(skb, intf->beacon->queue->desc_size); - memset(skb->data, 0, intf->beacon->queue->desc_size); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data + intf->beacon->queue->desc_size; - skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; - skbdesc->desc = skb->data; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®); - rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 0); - rt2x00_set_field16(®, TXRX_CSR19_TBCN, 0); - rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0); - rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg); - - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * USB devices cannot blindly pass the skb->len as the - * length of the data to usb_fill_bulk_urb. Pass the skb - * to the driver to determine what the length should be. - */ - length = rt2500usb_get_tx_data_len(rt2x00dev, skb); - - usb_fill_bulk_urb(priv_bcn->urb, usb_dev, pipe, - skb->data, length, rt2500usb_beacondone, - intf->beacon); - - /* - * Second we need to create the guardian byte. - * We only need a single byte, so lets recycle - * the 'flags' field we are not using for beacons. - */ - priv_bcn->guardian_data = 0; - usb_fill_bulk_urb(priv_bcn->guardian_urb, usb_dev, pipe, - &priv_bcn->guardian_data, 1, rt2500usb_beacondone, - intf->beacon); - - /* - * Send out the guardian byte. - */ - usb_submit_urb(priv_bcn->guardian_urb, GFP_ATOMIC); - - /* - * Enable beacon generation. - */ - rt2500usb_kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} - static const struct ieee80211_ops rt2500usb_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -1788,7 +1748,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = { .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, - .beacon_update = rt2500usb_beacon_update, }; static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { @@ -1803,6 +1762,7 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = { .link_tuner = rt2500usb_link_tuner, .write_tx_desc = rt2500usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, + .write_beacon = rt2500usb_write_beacon, .get_tx_data_len = rt2500usb_get_tx_data_len, .kick_tx_queue = rt2500usb_kick_tx_queue, .fill_rxdone = rt2500usb_fill_rxdone, @@ -1816,14 +1776,14 @@ static const struct data_queue_desc rt2500usb_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_rx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct data_queue_desc rt2500usb_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_tx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct data_queue_desc rt2500usb_queue_bcn = { @@ -1837,7 +1797,7 @@ static const struct data_queue_desc rt2500usb_queue_atim = { .entry_num = ATIM_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_tx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct rt2x00_ops rt2500usb_ops = { @@ -1846,6 +1806,7 @@ static const struct rt2x00_ops rt2500usb_ops = { .max_ap_intf = 1, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt2500usb_queue_rx, .tx = &rt2500usb_queue_tx, .bcn = &rt2500usb_queue_bcn, diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index a37a068d0c71..4769ffeb4cc6 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -48,8 +48,6 @@ * Signal information. * Defaul offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 120 /* @@ -63,6 +61,11 @@ #define RF_SIZE 0x0014 /* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 2 + +/* * Control/Status Registers(CSR). * Some values are set in TU, whereas 1 TU == 1024 us. */ @@ -206,7 +209,7 @@ #define MAC_CSR21_OFF_PERIOD FIELD16(0xff00) /* - * Collision window control register. + * MAC_CSR22: Collision window control register. */ #define MAC_CSR22 0x042c @@ -293,7 +296,7 @@ #define TXRX_CSR7_BBP_ID1_VALID FIELD16(0x8000) /* - * TXRX_CSR5: OFDM TX BBP ID1. + * TXRX_CSR8: OFDM TX BBP ID1. */ #define TXRX_CSR8 0x0450 #define TXRX_CSR8_BBP_ID0 FIELD16(0x007f) @@ -367,7 +370,14 @@ */ /* - * SEC_CSR0-SEC_CSR7: Shared key 0, word 0-7 + * SEC_CSR0: Shared key 0, word 0 + * SEC_CSR1: Shared key 0, word 1 + * SEC_CSR2: Shared key 0, word 2 + * SEC_CSR3: Shared key 0, word 3 + * SEC_CSR4: Shared key 0, word 4 + * SEC_CSR5: Shared key 0, word 5 + * SEC_CSR6: Shared key 0, word 6 + * SEC_CSR7: Shared key 0, word 7 */ #define SEC_CSR0 0x0480 #define SEC_CSR1 0x0482 @@ -379,7 +389,14 @@ #define SEC_CSR7 0x048e /* - * SEC_CSR8-SEC_CSR15: Shared key 1, word 0-7 + * SEC_CSR8: Shared key 1, word 0 + * SEC_CSR9: Shared key 1, word 1 + * SEC_CSR10: Shared key 1, word 2 + * SEC_CSR11: Shared key 1, word 3 + * SEC_CSR12: Shared key 1, word 4 + * SEC_CSR13: Shared key 1, word 5 + * SEC_CSR14: Shared key 1, word 6 + * SEC_CSR15: Shared key 1, word 7 */ #define SEC_CSR8 0x0490 #define SEC_CSR9 0x0492 @@ -391,7 +408,14 @@ #define SEC_CSR15 0x049e /* - * SEC_CSR16-SEC_CSR23: Shared key 2, word 0-7 + * SEC_CSR16: Shared key 2, word 0 + * SEC_CSR17: Shared key 2, word 1 + * SEC_CSR18: Shared key 2, word 2 + * SEC_CSR19: Shared key 2, word 3 + * SEC_CSR20: Shared key 2, word 4 + * SEC_CSR21: Shared key 2, word 5 + * SEC_CSR22: Shared key 2, word 6 + * SEC_CSR23: Shared key 2, word 7 */ #define SEC_CSR16 0x04a0 #define SEC_CSR17 0x04a2 @@ -403,7 +427,14 @@ #define SEC_CSR23 0x04ae /* - * SEC_CSR24-SEC_CSR31: Shared key 3, word 0-7 + * SEC_CSR24: Shared key 3, word 0 + * SEC_CSR25: Shared key 3, word 1 + * SEC_CSR26: Shared key 3, word 2 + * SEC_CSR27: Shared key 3, word 3 + * SEC_CSR28: Shared key 3, word 4 + * SEC_CSR29: Shared key 3, word 5 + * SEC_CSR30: Shared key 3, word 6 + * SEC_CSR31: Shared key 3, word 7 */ #define SEC_CSR24 0x04b0 #define SEC_CSR25 0x04b2 diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index a74e1a5c56fd..07b03b3c7ef1 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -44,7 +44,7 @@ /* * Module information. */ -#define DRV_VERSION "2.1.4" +#define DRV_VERSION "2.1.8" #define DRV_PROJECT "http://rt2x00.serialmonkey.com" /* @@ -111,33 +111,6 @@ #define EIFS ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) /* - * IEEE802.11 header defines - */ -static inline int is_rts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_RTS)); -} - -static inline int is_cts_frame(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_CTL) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_CTS)); -} - -static inline int is_probe_resp(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_PROBE_RESP)); -} - -static inline int is_beacon(u16 fc) -{ - return (((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)); -} - -/* * Chipset identification * The chipset on the device is composed of a RT and RF chip. * The chipset combination is important for determining device capabilities. @@ -391,6 +364,8 @@ struct rt2x00_intf { #define DELAYED_UPDATE_BEACON 0x00000001 #define DELAYED_CONFIG_ERP 0x00000002 #define DELAYED_LED_ASSOC 0x00000004 + + u16 seqno; }; static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) @@ -409,7 +384,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) * @supported_rates: Rate types which are supported (CCK, OFDM). * @num_channels: Number of supported channels. This is used as array size * for @tx_power_a, @tx_power_bg and @channels. - * channels: Device/chipset specific channel values (See &struct rf_channel). + * @channels: Device/chipset specific channel values (See &struct rf_channel). * @tx_power_a: TX power values for all 5.2GHz channels (may be NULL). * @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL). * @tx_power_default: Default TX power value to use when either @@ -461,6 +436,7 @@ struct rt2x00lib_conf { */ struct rt2x00lib_erp { int short_preamble; + int cts_protection; int ack_timeout; int ack_consume_time; @@ -545,15 +521,13 @@ struct rt2x00lib_ops { */ void (*write_tx_desc) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control); - int (*write_tx_data) (struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_tx_control *control); + struct txentry_desc *txdesc); + int (*write_tx_data) (struct queue_entry *entry); + void (*write_beacon) (struct queue_entry *entry); int (*get_tx_data_len) (struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); void (*kick_tx_queue) (struct rt2x00_dev *rt2x00dev, - const unsigned int queue); + const enum data_queue_qid queue); /* * RX control handlers @@ -597,6 +571,7 @@ struct rt2x00_ops { const unsigned int max_ap_intf; const unsigned int eeprom_size; const unsigned int rf_size; + const unsigned int tx_queues; const struct data_queue_desc *rx; const struct data_queue_desc *tx; const struct data_queue_desc *bcn; @@ -626,11 +601,11 @@ enum rt2x00_flags { /* * Driver features */ - DRIVER_SUPPORT_MIXED_INTERFACES, DRIVER_REQUIRE_FIRMWARE, DRIVER_REQUIRE_BEACON_GUARD, DRIVER_REQUIRE_ATIM_QUEUE, DRIVER_REQUIRE_SCHEDULED, + DRIVER_REQUIRE_DMA, /* * Driver configuration @@ -655,11 +630,7 @@ struct rt2x00_dev { * When accessing this variable, the rt2x00dev_{pci,usb} * macro's should be used for correct typecasting. */ - void *dev; -#define rt2x00dev_pci(__dev) ( (struct pci_dev *)(__dev)->dev ) -#define rt2x00dev_usb(__dev) ( (struct usb_interface *)(__dev)->dev ) -#define rt2x00dev_usb_dev(__dev)\ - ( (struct usb_device *)interface_to_usbdev(rt2x00dev_usb(__dev)) ) + struct device *dev; /* * Callback functions. @@ -682,7 +653,7 @@ struct rt2x00_dev { #define RFKILL_STATE_ALLOCATED 1 #define RFKILL_STATE_REGISTERED 2 struct rfkill *rfkill; - struct input_polled_dev *poll_dev; + struct delayed_work rfkill_work; #endif /* CONFIG_RT2X00_LIB_RFKILL */ /* @@ -820,8 +791,10 @@ struct rt2x00_dev { /* * Scheduled work. + * NOTE: intf_work will use ieee80211_iterate_active_interfaces() + * which means it cannot be placed on the hw->workqueue + * due to RTNL locking requirements. */ - struct workqueue_struct *workqueue; struct work_struct intf_work; struct work_struct filter_work; @@ -830,7 +803,7 @@ struct rt2x00_dev { * The Beacon array also contains the Atim queue * if that is supported by the device. */ - int data_queues; + unsigned int data_queues; struct data_queue *rx; struct data_queue *tx; struct data_queue *bcn; @@ -934,55 +907,41 @@ static inline u16 get_duration_res(const unsigned int size, const u8 rate) } /** - * rt2x00queue_get_queue - Convert mac80211 queue index to rt2x00 queue + * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @queue: mac80211/rt2x00 queue index - * (see &enum ieee80211_tx_queue and &enum rt2x00_bcn_queue). + * @skb: The skb to map. + */ +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_get_queue - Convert queue index to queue pointer + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: rt2x00 queue index (see &enum data_queue_qid). */ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue); + const enum data_queue_qid queue); /** * rt2x00queue_get_entry - Get queue entry where the given index points to. - * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: Pointer to &struct data_queue from where we obtain the entry. * @index: Index identifier for obtaining the correct index. */ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue, enum queue_index index); -/** - * rt2x00queue_index_inc - Index incrementation function - * @queue: Queue (&struct data_queue) to perform the action on. - * @action: Index type (&enum queue_index) to perform the action on. - * - * This function will increase the requested index on the queue, - * it will grab the appropriate locks and handle queue overflow events by - * resetting the index to the start of the queue. - */ -void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); - - /* * Interrupt context handlers. */ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev); void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc); - -/* - * TX descriptor initializer - */ -void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct ieee80211_tx_control *control); +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); /* * mac80211 handlers. */ -int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); +int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb); int rt2x00mac_start(struct ieee80211_hw *hw); void rt2x00mac_stop(struct ieee80211_hw *hw); int rt2x00mac_add_interface(struct ieee80211_hw *hw, @@ -1005,7 +964,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, u32 changes); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index 48608e8cc8b4..f20ca712504f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -84,6 +84,8 @@ void rt2x00lib_config_erp(struct rt2x00_dev *rt2x00dev, memset(&erp, 0, sizeof(erp)); erp.short_preamble = bss_conf->use_short_preamble; + erp.cts_protection = bss_conf->use_cts_prot; + erp.ack_timeout = PLCP + get_duration(ACK_SIZE, 10); erp.ack_consume_time = SIFS + PLCP + get_duration(ACK_SIZE, 10); diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c index bfab3b8780d6..300cf061035f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00debug.c +++ b/drivers/net/wireless/rt2x00/rt2x00debug.c @@ -115,7 +115,7 @@ struct rt2x00debug_intf { }; void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb) + enum rt2x00_dump_type type, struct sk_buff *skb) { struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; struct skb_frame_desc *desc = get_skb_frame_desc(skb); @@ -133,7 +133,7 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, return; } - skbcopy = alloc_skb(sizeof(*dump_hdr) + desc->desc_len + desc->data_len, + skbcopy = alloc_skb(sizeof(*dump_hdr) + desc->desc_len + skb->len, GFP_ATOMIC); if (!skbcopy) { DEBUG(rt2x00dev, "Failed to copy skb for dump.\n"); @@ -144,18 +144,18 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, dump_hdr->version = cpu_to_le32(DUMP_HEADER_VERSION); dump_hdr->header_length = cpu_to_le32(sizeof(*dump_hdr)); dump_hdr->desc_length = cpu_to_le32(desc->desc_len); - dump_hdr->data_length = cpu_to_le32(desc->data_len); + dump_hdr->data_length = cpu_to_le32(skb->len); dump_hdr->chip_rt = cpu_to_le16(rt2x00dev->chip.rt); dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf); dump_hdr->chip_rev = cpu_to_le32(rt2x00dev->chip.rev); - dump_hdr->type = cpu_to_le16(desc->frame_type); + dump_hdr->type = cpu_to_le16(type); dump_hdr->queue_index = desc->entry->queue->qid; dump_hdr->entry_index = desc->entry->entry_idx; dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec); dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec); memcpy(skb_put(skbcopy, desc->desc_len), desc->desc, desc->desc_len); - memcpy(skb_put(skbcopy, desc->data_len), desc->data, desc->data_len); + memcpy(skb_put(skbcopy, skb->len), skb->data, skb->len); skb_queue_tail(&intf->frame_dump_skbqueue, skbcopy); wake_up_interruptible(&intf->frame_dump_waitqueue); diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index c997d4f28ab3..8c93eb8353b0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -28,7 +28,6 @@ #include "rt2x00.h" #include "rt2x00lib.h" -#include "rt2x00dump.h" /* * Link tuning handlers @@ -75,7 +74,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00lib_reset_link_tuner(rt2x00dev); - queue_delayed_work(rt2x00dev->workqueue, + queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } @@ -113,6 +112,8 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) if (status) return status; + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON); + rt2x00leds_led_radio(rt2x00dev, true); rt2x00led_led_activity(rt2x00dev, true); @@ -126,7 +127,7 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Start the TX queues. */ - ieee80211_start_queues(rt2x00dev->hw); + ieee80211_wake_queues(rt2x00dev->hw); return 0; } @@ -150,6 +151,7 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) * Disable radio. */ rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); rt2x00led_led_activity(rt2x00dev, false); rt2x00leds_led_radio(rt2x00dev, false); } @@ -390,7 +392,7 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->workqueue, + queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } @@ -407,8 +409,6 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, { struct rt2x00_dev *rt2x00dev = data; struct rt2x00_intf *intf = vif_to_intf(vif); - struct sk_buff *skb; - struct ieee80211_tx_control control; struct ieee80211_bss_conf conf; int delayed_flags; @@ -434,12 +434,8 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - if (delayed_flags & DELAYED_UPDATE_BEACON) { - skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control); - if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, - skb, &control)) - dev_kfree_skb(skb); - } + if (delayed_flags & DELAYED_UPDATE_BEACON) + rt2x00queue_update_beacon(rt2x00dev, vif); if (delayed_flags & DELAYED_CONFIG_ERP) rt2x00lib_config_erp(rt2x00dev, intf, &conf); @@ -468,12 +464,19 @@ static void rt2x00lib_intf_scheduled(struct work_struct *work) static void rt2x00lib_beacondone_iter(void *data, u8 *mac, struct ieee80211_vif *vif) { + struct rt2x00_dev *rt2x00dev = data; struct rt2x00_intf *intf = vif_to_intf(vif); if (vif->type != IEEE80211_IF_TYPE_AP && vif->type != IEEE80211_IF_TYPE_IBSS) return; + /* + * Clean up the beacon skb. + */ + rt2x00queue_free_skb(rt2x00dev, intf->beacon->skb); + intf->beacon->skb = NULL; + spin_lock(&intf->lock); intf->delayed_flags |= DELAYED_UPDATE_BEACON; spin_unlock(&intf->lock); @@ -488,7 +491,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) rt2x00lib_beacondone_iter, rt2x00dev); - queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); + schedule_work(&rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); @@ -496,79 +499,132 @@ void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc) { struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct skb_frame_desc *skbdesc; - struct ieee80211_tx_status tx_status; - int success = !!(txdesc->status == TX_SUCCESS || - txdesc->status == TX_SUCCESS_RETRY); - int fail = !!(txdesc->status == TX_FAIL_RETRY || - txdesc->status == TX_FAIL_INVALID || - txdesc->status == TX_FAIL_OTHER); + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + enum data_queue_qid qid = skb_get_queue_mapping(entry->skb); + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + + /* + * Send frame to debugfs immediately, after this call is completed + * we are going to overwrite the skb->cb array. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb); /* * Update TX statistics. */ - rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += fail; + rt2x00dev->link.qual.tx_success += + test_bit(TXDONE_SUCCESS, &txdesc->flags); + rt2x00dev->link.qual.tx_failed += + test_bit(TXDONE_FAILURE, &txdesc->flags); /* * Initialize TX status */ - tx_status.flags = 0; - tx_status.ack_signal = 0; - tx_status.excessive_retries = (txdesc->status == TX_FAIL_RETRY); - tx_status.retry_count = txdesc->retry; - memcpy(&tx_status.control, txdesc->control, sizeof(*txdesc->control)); + memset(&tx_info->status, 0, sizeof(tx_info->status)); + tx_info->status.ack_signal = 0; + tx_info->status.excessive_retries = + test_bit(TXDONE_EXCESSIVE_RETRY, &txdesc->flags); + tx_info->status.retry_count = txdesc->retry; - if (!(tx_status.control.flags & IEEE80211_TXCTL_NO_ACK)) { - if (success) - tx_status.flags |= IEEE80211_TX_STATUS_ACK; - else + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) + tx_info->flags |= IEEE80211_TX_STAT_ACK; + else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) rt2x00dev->low_level_stats.dot11ACKFailureCount++; } - tx_status.queue_length = entry->queue->limit; - tx_status.queue_number = tx_status.control.queue; - - if (tx_status.control.flags & IEEE80211_TXCTL_USE_RTS_CTS) { - if (success) + if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) { + if (test_bit(TXDONE_SUCCESS, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSSuccessCount++; - else + else if (test_bit(TXDONE_FAILURE, &txdesc->flags)) rt2x00dev->low_level_stats.dot11RTSFailureCount++; } /* - * Send the tx_status to debugfs. Only send the status report - * to mac80211 when the frame originated from there. If this was - * a extra frame coming through a mac80211 library call (RTS/CTS) - * then we should not send the status report back. - * If send to mac80211, mac80211 will clean up the skb structure, - * otherwise we have to do it ourself. + * Only send the status report to mac80211 when TX status was + * requested by it. If this was a extra frame coming through + * a mac80211 library call (RTS/CTS) then we should not send the + * status report back. */ - skbdesc = get_skb_frame_desc(entry->skb); - skbdesc->frame_type = DUMP_FRAME_TXDONE; - - rt2x00debug_dump_frame(rt2x00dev, entry->skb); - - if (!(skbdesc->flags & FRAME_DESC_DRIVER_GENERATED)) - ieee80211_tx_status_irqsafe(rt2x00dev->hw, - entry->skb, &tx_status); + if (tx_info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS) + ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb); else - dev_kfree_skb(entry->skb); + dev_kfree_skb_irq(entry->skb); + + /* + * Make this entry available for reuse. + */ entry->skb = NULL; + entry->flags = 0; + + rt2x00dev->ops->lib->init_txentry(rt2x00dev, entry); + + __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); + + /* + * If the data queue was below the threshold before the txdone + * handler we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. + */ + if (!rt2x00queue_threshold(entry->queue)) + ieee80211_wake_queue(rt2x00dev->hw, qid); } EXPORT_SYMBOL_GPL(rt2x00lib_txdone); -void rt2x00lib_rxdone(struct queue_entry *entry, - struct rxdone_entry_desc *rxdesc) +void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct rxdone_entry_desc rxdesc; + struct sk_buff *skb; struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status; struct ieee80211_supported_band *sband; struct ieee80211_hdr *hdr; const struct rt2x00_rate *rate; + unsigned int header_size; + unsigned int align; unsigned int i; int idx = -1; - u16 fc; + + /* + * Allocate a new sk_buffer. If no new buffer available, drop the + * received frame and reuse the existing buffer. + */ + skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry); + if (!skb) + return; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(rt2x00dev, entry->skb); + + /* + * Extract the RXD details. + */ + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); + + /* + * The data behind the ieee80211 header must be + * aligned on a 4 byte boundary. + */ + header_size = ieee80211_get_hdrlen_from_skb(entry->skb); + align = ((unsigned long)(entry->skb->data + header_size)) & 3; + + if (align) { + skb_push(entry->skb, align); + /* Move entire frame in 1 command */ + memmove(entry->skb->data, entry->skb->data + align, + rxdesc.size); + } + + /* Update data pointers, trim buffer to correct size */ + skb_trim(entry->skb, rxdesc.size); /* * Update RX statistics. @@ -577,10 +633,10 @@ void rt2x00lib_rxdone(struct queue_entry *entry, for (i = 0; i < sband->n_bitrates; i++) { rate = rt2x00_get_rate(sband->bitrates[i].hw_value); - if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->plcp == rxdesc->signal)) || - (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) && - (rate->bitrate == rxdesc->signal))) { + if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->plcp == rxdesc.signal)) || + (!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) && + (rate->bitrate == rxdesc.signal))) { idx = i; break; } @@ -588,8 +644,8 @@ void rt2x00lib_rxdone(struct queue_entry *entry, if (idx < 0) { WARNING(rt2x00dev, "Frame received with unrecognized signal," - "signal=0x%.2x, plcp=%d.\n", rxdesc->signal, - !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP)); + "signal=0x%.2x, plcp=%d.\n", rxdesc.signal, + !!(rxdesc.dev_flags & RXDONE_SIGNAL_PLCP)); idx = 0; } @@ -597,170 +653,38 @@ void rt2x00lib_rxdone(struct queue_entry *entry, * Only update link status if this is a beacon frame carrying our bssid. */ hdr = (struct ieee80211_hdr *)entry->skb->data; - fc = le16_to_cpu(hdr->frame_control); - if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS)) - rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi); + if (ieee80211_is_beacon(hdr->frame_control) && + (rxdesc.dev_flags & RXDONE_MY_BSS)) + rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc.rssi); rt2x00dev->link.qual.rx_success++; + rx_status->mactime = rxdesc.timestamp; rx_status->rate_idx = idx; - rx_status->signal = - rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi); - rx_status->ssi = rxdesc->rssi; - rx_status->flag = rxdesc->flags; + rx_status->qual = + rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi); + rx_status->signal = rxdesc.rssi; + rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; /* * Send frame to mac80211 & debugfs. * mac80211 will clean up the skb structure. */ - get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_RXDONE; - rt2x00debug_dump_frame(rt2x00dev, entry->skb); + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status); - entry->skb = NULL; -} -EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); - -/* - * TX descriptor initializer - */ -void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct txentry_desc txdesc; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skbdesc->data; - const struct rt2x00_rate *rate; - int tx_rate; - int length; - int duration; - int residual; - u16 frame_control; - u16 seq_ctrl; - - memset(&txdesc, 0, sizeof(txdesc)); - - txdesc.queue = skbdesc->entry->queue->qid; - txdesc.cw_min = skbdesc->entry->queue->cw_min; - txdesc.cw_max = skbdesc->entry->queue->cw_max; - txdesc.aifs = skbdesc->entry->queue->aifs; - - /* - * Read required fields from ieee80211 header. - */ - frame_control = le16_to_cpu(hdr->frame_control); - seq_ctrl = le16_to_cpu(hdr->seq_ctrl); - - tx_rate = control->tx_rate->hw_value; /* - * Check whether this frame is to be acked + * Replace the skb with the freshly allocated one. */ - if (!(control->flags & IEEE80211_TXCTL_NO_ACK)) - __set_bit(ENTRY_TXD_ACK, &txdesc.flags); - - /* - * Check if this is a RTS/CTS frame - */ - if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) { - __set_bit(ENTRY_TXD_BURST, &txdesc.flags); - if (is_rts_frame(frame_control)) { - __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags); - __set_bit(ENTRY_TXD_ACK, &txdesc.flags); - } else - __clear_bit(ENTRY_TXD_ACK, &txdesc.flags); - if (control->rts_cts_rate) - tx_rate = control->rts_cts_rate->hw_value; - } - - rate = rt2x00_get_rate(tx_rate); - - /* - * Check if more fragments are pending - */ - if (ieee80211_get_morefrag(hdr)) { - __set_bit(ENTRY_TXD_BURST, &txdesc.flags); - __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc.flags); - } - - /* - * Beacons and probe responses require the tsf timestamp - * to be inserted into the frame. - */ - if (control->queue == RT2X00_BCN_QUEUE_BEACON || - is_probe_resp(frame_control)) - __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags); - - /* - * Determine with what IFS priority this frame should be send. - * Set ifs to IFS_SIFS when the this is not the first fragment, - * or this fragment came after RTS/CTS. - */ - if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 || - test_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags)) - txdesc.ifs = IFS_SIFS; - else - txdesc.ifs = IFS_BACKOFF; - - /* - * PLCP setup - * Length calculation depends on OFDM/CCK rate. - */ - txdesc.signal = rate->plcp; - txdesc.service = 0x04; - - length = skbdesc->data_len + FCS_LEN; - if (rate->flags & DEV_RATE_OFDM) { - __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc.flags); - - txdesc.length_high = (length >> 6) & 0x3f; - txdesc.length_low = length & 0x3f; - } else { - /* - * Convert length to microseconds. - */ - residual = get_duration_res(length, rate->bitrate); - duration = get_duration(length, rate->bitrate); - - if (residual != 0) { - duration++; - - /* - * Check if we need to set the Length Extension - */ - if (rate->bitrate == 110 && residual <= 30) - txdesc.service |= 0x80; - } - - txdesc.length_high = (duration >> 8) & 0xff; - txdesc.length_low = duration & 0xff; - - /* - * When preamble is enabled we should set the - * preamble bit for the signal. - */ - if (rt2x00_get_rate_preamble(tx_rate)) - txdesc.signal |= 0x08; - } - - rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &txdesc, control); + entry->skb = skb; + entry->flags = 0; - /* - * Update queue entry. - */ - skbdesc->entry->skb = skb; + rt2x00dev->ops->lib->init_rxentry(rt2x00dev, entry); - /* - * The frame has been completely initialized and ready - * for sending to the device. The caller will push the - * frame to the device, but we are going to push the - * frame to debugfs here. - */ - skbdesc->frame_type = DUMP_FRAME_TX; - rt2x00debug_dump_frame(rt2x00dev, skb); + rt2x00queue_index_inc(entry->queue, Q_INDEX); } -EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc); +EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); /* * Driver initialization handlers. @@ -978,6 +902,11 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) return status; /* + * Initialize HW fields. + */ + rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues; + + /* * Register HW. */ status = ieee80211_register_hw(rt2x00dev->hw); @@ -1131,10 +1060,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Initialize configuration work. */ - rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib"); - if (!rt2x00dev->workqueue) - goto exit; - INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); @@ -1195,13 +1120,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_unregister(rt2x00dev); /* - * Stop all queued work. Note that most tasks will already be halted - * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize(). - */ - flush_workqueue(rt2x00dev->workqueue); - destroy_workqueue(rt2x00dev->workqueue); - - /* * Free ieee80211_hw memory. */ rt2x00lib_remove_hw(rt2x00dev); @@ -1246,7 +1164,6 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state) * Suspend/disable extra components. */ rt2x00leds_suspend(rt2x00dev); - rt2x00rfkill_suspend(rt2x00dev); rt2x00debug_deregister(rt2x00dev); exit: @@ -1302,7 +1219,6 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) * Restore/enable extra components. */ rt2x00debug_register(rt2x00dev); - rt2x00rfkill_resume(rt2x00dev); rt2x00leds_resume(rt2x00dev); /* @@ -1343,7 +1259,7 @@ int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) * In that case we have disabled the TX queue and should * now enable it again */ - ieee80211_start_queues(rt2x00dev->hw); + ieee80211_wake_queues(rt2x00dev->hw); /* * During interface iteration we might have changed the diff --git a/drivers/net/wireless/rt2x00/rt2x00firmware.c b/drivers/net/wireless/rt2x00/rt2x00firmware.c index b971bc6e7ee2..bab05a56e7a0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00firmware.c +++ b/drivers/net/wireless/rt2x00/rt2x00firmware.c @@ -100,6 +100,14 @@ int rt2x00lib_load_firmware(struct rt2x00_dev *rt2x00dev) retval = rt2x00dev->ops->lib->load_firmware(rt2x00dev, rt2x00dev->fw->data, rt2x00dev->fw->size); + + /* + * When the firmware is uploaded to the hardware the LED + * association status might have been triggered, for correct + * LED handling it should now be reset. + */ + rt2x00leds_led_assoc(rt2x00dev, false); + return retval; } diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h index 41ee02cd2825..f2c9b0e79b5f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00lib.h +++ b/drivers/net/wireless/rt2x00/rt2x00lib.h @@ -26,12 +26,14 @@ #ifndef RT2X00LIB_H #define RT2X00LIB_H +#include "rt2x00dump.h" + /* * Interval defines * Both the link tuner as the rfkill will be called once per second. */ #define LINK_TUNE_INTERVAL ( round_jiffies_relative(HZ) ) -#define RFKILL_POLL_INTERVAL ( 1000 ) +#define RFKILL_POLL_INTERVAL ( round_jiffies_relative(HZ) ) /* * rt2x00_rate: Per rate device information @@ -96,9 +98,65 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, void rt2x00lib_config(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, const int force_config); -/* - * Queue handlers. +/** + * DOC: Queue handlers + */ + +/** + * rt2x00queue_alloc_rxskb - allocate a skb for RX purposes. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @queue: The queue for which the skb will be applicable. + */ +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry); + +/** + * rt2x00queue_unmap_skb - Unmap a skb from DMA. + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to unmap. + */ +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_free_skb - free a skb + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @skb: The skb to free. + */ +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); + +/** + * rt2x00queue_write_tx_frame - Write TX frame to hardware + * @queue: Queue over which the frame should be send + * @skb: The skb to send + */ +int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb); + +/** + * rt2x00queue_update_beacon - Send new beacon from mac80211 to hardware + * @rt2x00dev: Pointer to &struct rt2x00_dev. + * @vif: Interface for which the beacon should be updated. */ +int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, + struct ieee80211_vif *vif); + +/** + * rt2x00queue_index_inc - Index incrementation function + * @queue: Queue (&struct data_queue) to perform the action on. + * @index: Index type (&enum queue_index) to perform the action on. + * + * This function will increase the requested index on the queue, + * it will grab the appropriate locks and handle queue overflow events by + * resetting the index to the start of the queue. + */ +void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index); + void rt2x00queue_init_rx(struct rt2x00_dev *rt2x00dev); void rt2x00queue_init_tx(struct rt2x00_dev *rt2x00dev); int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev); @@ -128,7 +186,8 @@ static inline void rt2x00lib_free_firmware(struct rt2x00_dev *rt2x00dev) #ifdef CONFIG_RT2X00_LIB_DEBUGFS void rt2x00debug_register(struct rt2x00_dev *rt2x00dev); void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev); -void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb); +void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, + enum rt2x00_dump_type type, struct sk_buff *skb); #else static inline void rt2x00debug_register(struct rt2x00_dev *rt2x00dev) { @@ -139,6 +198,7 @@ static inline void rt2x00debug_deregister(struct rt2x00_dev *rt2x00dev) } static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, + enum rt2x00_dump_type type, struct sk_buff *skb) { } @@ -152,8 +212,6 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev); void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev); void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev); void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev); -void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev); -void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev); #else static inline void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) { @@ -170,14 +228,6 @@ static inline void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) static inline void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { } - -static inline void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev) -{ -} - -static inline void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) -{ -} #endif /* CONFIG_RT2X00_LIB_RFKILL */ /* diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 9cb023edd2e9..f1dcbaa80c3c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -31,14 +31,14 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, struct data_queue *queue, - struct sk_buff *frag_skb, - struct ieee80211_tx_control *control) + struct sk_buff *frag_skb) { - struct skb_frame_desc *skbdesc; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb); + struct ieee80211_tx_info *rts_info; struct sk_buff *skb; int size; - if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) size = sizeof(struct ieee80211_cts); else size = sizeof(struct ieee80211_rts); @@ -52,23 +52,37 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom); skb_put(skb, size); - if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - ieee80211_ctstoself_get(rt2x00dev->hw, control->vif, - frag_skb->data, frag_skb->len, control, + /* + * Copy TX information over from original frame to + * RTS/CTS frame. Note that we set the no encryption flag + * since we don't want this frame to be encrypted. + * RTS frames should be acked, while CTS-to-self frames + * should not. The ready for TX flag is cleared to prevent + * it being automatically send when the descriptor is + * written to the hardware. + */ + memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb)); + rts_info = IEEE80211_SKB_CB(skb); + rts_info->flags |= IEEE80211_TX_CTL_DO_NOT_ENCRYPT; + rts_info->flags &= ~IEEE80211_TX_CTL_USE_RTS_CTS; + rts_info->flags &= ~IEEE80211_TX_CTL_USE_CTS_PROTECT; + rts_info->flags &= ~IEEE80211_TX_CTL_REQ_TX_STATUS; + + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + rts_info->flags |= IEEE80211_TX_CTL_NO_ACK; + else + rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK; + + if (tx_info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) + ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif, + frag_skb->data, size, tx_info, (struct ieee80211_cts *)(skb->data)); else - ieee80211_rts_get(rt2x00dev->hw, control->vif, - frag_skb->data, frag_skb->len, control, + ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif, + frag_skb->data, size, tx_info, (struct ieee80211_rts *)(skb->data)); - /* - * Initialize skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { + if (rt2x00queue_write_tx_frame(queue, skb)) { WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n"); return NETDEV_TX_BUSY; } @@ -76,13 +90,14 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, return NETDEV_TX_OK; } -int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) +int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data; + enum data_queue_qid qid = skb_get_queue_mapping(skb); + struct rt2x00_intf *intf = vif_to_intf(tx_info->control.vif); struct data_queue *queue; - struct skb_frame_desc *skbdesc; u16 frame_control; /* @@ -100,57 +115,62 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, /* * Determine which queue to put packet on. */ - if (control->flags & IEEE80211_TXCTL_SEND_AFTER_DTIM && + if (tx_info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM && test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - queue = rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_ATIM); + queue = rt2x00queue_get_queue(rt2x00dev, QID_ATIM); else - queue = rt2x00queue_get_queue(rt2x00dev, control->queue); + queue = rt2x00queue_get_queue(rt2x00dev, qid); if (unlikely(!queue)) { ERROR(rt2x00dev, "Attempt to send packet over invalid queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); + "Please file bug report to %s.\n", qid, DRV_PROJECT); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } /* - * If CTS/RTS is required. and this frame is not CTS or RTS, - * create and queue that frame first. But make sure we have - * at least enough entries available to send this CTS/RTS - * frame as well as the data frame. + * If CTS/RTS is required. create and queue that frame first. + * Make sure we have at least enough entries available to send + * this CTS/RTS frame as well as the data frame. + * Note that when the driver has set the set_rts_threshold() + * callback function it doesn't need software generation of + * either RTS or CTS-to-self frame and handles everything + * inside the hardware. */ frame_control = le16_to_cpu(ieee80211hdr->frame_control); - if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) && - (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS | - IEEE80211_TXCTL_USE_CTS_PROTECT))) { + if ((tx_info->flags & (IEEE80211_TX_CTL_USE_RTS_CTS | + IEEE80211_TX_CTL_USE_CTS_PROTECT)) && + !rt2x00dev->ops->hw->set_rts_threshold) { if (rt2x00queue_available(queue) <= 1) { - ieee80211_stop_queue(rt2x00dev->hw, control->queue); + ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; } - if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb, control)) { - ieee80211_stop_queue(rt2x00dev->hw, control->queue); + if (rt2x00mac_tx_rts_cts(rt2x00dev, queue, skb)) { + ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; } } /* - * Initialize skb descriptor + * XXX: This is as wrong as the old mac80211 code was, + * due to beacons not getting sequence numbers assigned + * properly. */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); + if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + intf->seqno += 0x10; + ieee80211hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + ieee80211hdr->seq_ctrl |= cpu_to_le16(intf->seqno); + } - if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, queue, skb, control)) { - ieee80211_stop_queue(rt2x00dev->hw, control->queue); + if (rt2x00queue_write_tx_frame(queue, skb)) { + ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_BUSY; } - if (rt2x00queue_full(queue)) - ieee80211_stop_queue(rt2x00dev->hw, control->queue); - - if (rt2x00dev->ops->lib->kick_tx_queue) - rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue); + if (rt2x00queue_threshold(queue)) + ieee80211_stop_queue(rt2x00dev->hw, qid); return NETDEV_TX_OK; } @@ -183,8 +203,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, { struct rt2x00_dev *rt2x00dev = hw->priv; struct rt2x00_intf *intf = vif_to_intf(conf->vif); - struct data_queue *queue = - rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON); + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, QID_BEACON); struct queue_entry *entry = NULL; unsigned int i; @@ -197,13 +216,12 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, return -ENODEV; /* - * When we don't support mixed interfaces (a combination - * of sta and ap virtual interfaces) then we can only - * add this interface when the rival interface count is 0. + * We don't support mixed combinations of sta and ap virtual + * interfaces. We can only add this interface when the rival + * interface count is 0. */ - if (!test_bit(DRIVER_SUPPORT_MIXED_INTERFACES, &rt2x00dev->flags) && - ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || - (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count))) + if ((conf->type == IEEE80211_IF_TYPE_AP && rt2x00dev->intf_sta_count) || + (conf->type != IEEE80211_IF_TYPE_AP && rt2x00dev->intf_ap_count)) return -ENOBUFS; /* @@ -343,7 +361,8 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, { struct rt2x00_dev *rt2x00dev = hw->priv; struct rt2x00_intf *intf = vif_to_intf(vif); - int status; + int update_bssid = 0; + int status = 0; /* * Mac80211 might be calling this function while we are trying @@ -355,12 +374,13 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, spin_lock(&intf->lock); /* - * If the interface does not work in master mode, - * then the bssid value in the interface structure - * should now be set. + * conf->bssid can be NULL if coming from the internal + * beacon update routine. */ - if (conf->type != IEEE80211_IF_TYPE_AP) + if (conf->changed & IEEE80211_IFCC_BSSID && conf->bssid) { + update_bssid = 1; memcpy(&intf->bssid, conf->bssid, ETH_ALEN); + } spin_unlock(&intf->lock); @@ -370,19 +390,14 @@ int rt2x00mac_config_interface(struct ieee80211_hw *hw, * values as arguments we make keep access to rt2x00_intf thread safe * even without the lock. */ - rt2x00lib_config_intf(rt2x00dev, intf, conf->type, NULL, conf->bssid); + rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL, + update_bssid ? conf->bssid : NULL); /* - * We only need to initialize the beacon when master mode is enabled. + * Update the beacon. */ - if (conf->type != IEEE80211_IF_TYPE_AP || !conf->beacon) - return 0; - - status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, - conf->beacon, - conf->beacon_control); - if (status) - dev_kfree_skb(conf->beacon); + if (conf->changed & IEEE80211_IFCC_BEACON) + status = rt2x00queue_update_beacon(rt2x00dev, vif); return status; } @@ -428,7 +443,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); else - queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work); + queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); @@ -454,10 +469,10 @@ int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw, struct rt2x00_dev *rt2x00dev = hw->priv; unsigned int i; - for (i = 0; i < hw->queues; i++) { - stats->data[i].len = rt2x00dev->tx[i].length; - stats->data[i].limit = rt2x00dev->tx[i].limit; - stats->data[i].count = rt2x00dev->tx[i].count; + for (i = 0; i < rt2x00dev->ops->tx_queues; i++) { + stats[i].len = rt2x00dev->tx[i].length; + stats[i].limit = rt2x00dev->tx[i].limit; + stats[i].count = rt2x00dev->tx[i].count; } return 0; @@ -498,7 +513,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, * When the erp information has changed, we should perform * additional configuration steps. For all other changes we are done. */ - if (changes & BSS_CHANGED_ERP_PREAMBLE) { + if (changes & (BSS_CHANGED_ERP_PREAMBLE | BSS_CHANGED_ERP_CTS_PROT)) { if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00lib_config_erp(rt2x00dev, intf, bss_conf); else @@ -509,13 +524,13 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); if (delayed) { intf->delayed_flags |= delayed; - queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); + schedule_work(&rt2x00dev->intf_work); } spin_unlock(&intf->lock); } EXPORT_SYMBOL_GPL(rt2x00mac_bss_info_changed); -int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx, +int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue_idx, const struct ieee80211_tx_queue_params *params) { struct rt2x00_dev *rt2x00dev = hw->priv; @@ -539,10 +554,7 @@ int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue_idx, else queue->cw_max = 10; /* cw_min: 2^10 = 1024. */ - if (params->aifs >= 0) - queue->aifs = params->aifs; - else - queue->aifs = 2; + queue->aifs = params->aifs; INFO(rt2x00dev, "Configured TX queue %d - CWmin: %d, CWmax: %d, Aifs: %d.\n", diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 60893de3bf8f..adf2876ed8ab 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -34,44 +34,34 @@ /* * TX data handlers. */ -int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_tx_control *control) +int rt2x00pci_write_tx_data(struct queue_entry *entry) { - struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; u32 word; - if (rt2x00queue_full(queue)) - return -EINVAL; - - rt2x00_desc_read(priv_tx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); - if (rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || - rt2x00_get_field32(word, TXD_ENTRY_VALID)) { - ERROR(rt2x00dev, - "Arrived at non-free entry in the non-full queue %d.\n" + /* + * This should not happen, we already checked the entry + * was ours. When the hardware disagrees there has been + * a queue corruption! + */ + if (unlikely(rt2x00_get_field32(word, TXD_ENTRY_OWNER_NIC) || + rt2x00_get_field32(word, TXD_ENTRY_VALID))) { + ERROR(entry->queue->rt2x00dev, + "Corrupt queue %d, accessing entry which is not ours.\n" "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); + entry->queue->qid, DRV_PROJECT); return -EINVAL; } /* * Fill in skb descriptor */ - skbdesc = get_skb_frame_desc(skb); - skbdesc->data = skb->data; - skbdesc->data_len = skb->len; - skbdesc->desc = priv_tx->desc; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; - - memcpy(&priv_tx->control, control, sizeof(priv_tx->control)); - memcpy(priv_tx->data, skb->data, skb->len); - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - rt2x00queue_index_inc(queue, Q_INDEX); + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; return 0; } @@ -84,180 +74,62 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue = rt2x00dev->rx; struct queue_entry *entry; - struct queue_entry_priv_pci_rx *priv_rx; - struct ieee80211_hdr *hdr; + struct queue_entry_priv_pci *entry_priv; struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; - int header_size; - int align; u32 word; while (1) { entry = rt2x00queue_get_entry(queue, Q_INDEX); - priv_rx = entry->priv_data; - rt2x00_desc_read(priv_rx->desc, 0, &word); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); if (rt2x00_get_field32(word, RXD_ENTRY_OWNER_NIC)) break; - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - hdr = (struct ieee80211_hdr *)priv_rx->data; - header_size = - ieee80211_get_hdrlen(le16_to_cpu(hdr->frame_control)); - /* - * The data behind the ieee80211 header must be - * aligned on a 4 byte boundary. - */ - align = header_size % 4; - - /* - * Allocate the sk_buffer, initialize it and copy - * all data into it. - */ - entry->skb = dev_alloc_skb(rxdesc.size + align); - if (!entry->skb) - return; - - skb_reserve(entry->skb, align); - memcpy(skb_put(entry->skb, rxdesc.size), - priv_rx->data, rxdesc.size); - - /* - * Fill in skb descriptor + * Fill in desc fields of the skb descriptor */ skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->data = entry->skb->data; - skbdesc->data_len = entry->skb->len; - skbdesc->desc = priv_rx->desc; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; + skbdesc->desc = entry_priv->desc; + skbdesc->desc_len = entry->queue->desc_size; /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, &rxdesc); - - if (test_bit(DEVICE_ENABLED_RADIO, &queue->rt2x00dev->flags)) { - rt2x00_set_field32(&word, RXD_ENTRY_OWNER_NIC, 1); - rt2x00_desc_write(priv_rx->desc, 0, word); - } - - rt2x00queue_index_inc(queue, Q_INDEX); + rt2x00lib_rxdone(rt2x00dev, entry); } } EXPORT_SYMBOL_GPL(rt2x00pci_rxdone); -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *txdesc) -{ - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; - u32 word; - - txdesc->control = &priv_tx->control; - rt2x00lib_txdone(entry, txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - - rt2x00_desc_read(priv_tx->desc, 0, &word); - rt2x00_set_field32(&word, TXD_ENTRY_OWNER_NIC, 0); - rt2x00_set_field32(&word, TXD_ENTRY_VALID, 0); - rt2x00_desc_write(priv_tx->desc, 0, word); - - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_full(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue); - -} -EXPORT_SYMBOL_GPL(rt2x00pci_txdone); - /* * Device initialization handlers. */ -#define desc_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->desc_size);\ -}) - -#define data_size(__queue) \ -({ \ - ((__queue)->limit * (__queue)->data_size);\ -}) - -#define dma_size(__queue) \ -({ \ - data_size(__queue) + desc_size(__queue);\ -}) - -#define desc_offset(__queue, __base, __i) \ -({ \ - (__base) + data_size(__queue) + \ - ((__i) * (__queue)->desc_size); \ -}) - -#define data_offset(__queue, __base, __i) \ -({ \ - (__base) + \ - ((__i) * (__queue)->data_size); \ -}) - static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; void *addr; dma_addr_t dma; - void *desc_addr; - dma_addr_t desc_dma; - void *data_addr; - dma_addr_t data_dma; unsigned int i; /* * Allocate DMA memory for descriptor and buffer. */ - addr = pci_alloc_consistent(pci_dev, dma_size(queue), &dma); + addr = dma_alloc_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + &dma, GFP_KERNEL | GFP_DMA); if (!addr) return -ENOMEM; - memset(addr, 0, dma_size(queue)); + memset(addr, 0, queue->limit * queue->desc_size); /* * Initialize all queue entries to contain valid addresses. */ for (i = 0; i < queue->limit; i++) { - desc_addr = desc_offset(queue, addr, i); - desc_dma = desc_offset(queue, dma, i); - data_addr = data_offset(queue, addr, i); - data_dma = data_offset(queue, dma, i); - - if (queue->qid == QID_RX) { - priv_rx = queue->entries[i].priv_data; - priv_rx->desc = desc_addr; - priv_rx->desc_dma = desc_dma; - priv_rx->data = data_addr; - priv_rx->data_dma = data_dma; - } else { - priv_tx = queue->entries[i].priv_data; - priv_tx->desc = desc_addr; - priv_tx->desc_dma = desc_dma; - priv_tx->data = data_addr; - priv_tx->data_dma = data_dma; - } + entry_priv = queue->entries[i].priv_data; + entry_priv->desc = addr + i * queue->desc_size; + entry_priv->desc_dma = dma + i * queue->desc_size; } return 0; @@ -266,34 +138,19 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev, static void rt2x00pci_free_queue_dma(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; - void *data_addr; - dma_addr_t data_dma; - - if (queue->qid == QID_RX) { - priv_rx = queue->entries[0].priv_data; - data_addr = priv_rx->data; - data_dma = priv_rx->data_dma; - - priv_rx->data = NULL; - } else { - priv_tx = queue->entries[0].priv_data; - data_addr = priv_tx->data; - data_dma = priv_tx->data_dma; - - priv_tx->data = NULL; - } - - if (data_addr) - pci_free_consistent(pci_dev, dma_size(queue), - data_addr, data_dma); + struct queue_entry_priv_pci *entry_priv = + queue->entries[0].priv_data; + + if (entry_priv->desc) + dma_free_coherent(rt2x00dev->dev, + queue->limit * queue->desc_size, + entry_priv->desc, entry_priv->desc_dma); + entry_priv->desc = NULL; } int rt2x00pci_initialize(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); struct data_queue *queue; int status; @@ -334,7 +191,7 @@ void rt2x00pci_uninitialize(struct rt2x00_dev *rt2x00dev) /* * Free irq line. */ - free_irq(rt2x00dev_pci(rt2x00dev)->irq, rt2x00dev); + free_irq(to_pci_dev(rt2x00dev->dev)->irq, rt2x00dev); /* * Free DMA @@ -363,7 +220,7 @@ static void rt2x00pci_free_reg(struct rt2x00_dev *rt2x00dev) static int rt2x00pci_alloc_reg(struct rt2x00_dev *rt2x00dev) { - struct pci_dev *pci_dev = rt2x00dev_pci(rt2x00dev); + struct pci_dev *pci_dev = to_pci_dev(rt2x00dev->dev); rt2x00dev->csr.base = ioremap(pci_resource_start(pci_dev, 0), pci_resource_len(pci_dev, 0)); @@ -412,7 +269,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (dma_set_mask(&pci_dev->dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; @@ -428,7 +285,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) pci_set_drvdata(pci_dev, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = pci_dev; + rt2x00dev->dev = &pci_dev->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h index b41967ecbf6d..80bf97c03e2d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.h +++ b/drivers/net/wireless/rt2x00/rt2x00pci.h @@ -87,44 +87,26 @@ rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev, memcpy_toio(rt2x00dev->csr.base + offset, value, length); } -/* - * TX data handlers. - */ -int rt2x00pci_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_tx_control *control); - /** - * struct queue_entry_priv_pci_rx: Per RX entry PCI specific information + * rt2x00pci_write_tx_data - Initialize data for TX operation + * @entry: The entry where the frame is located * - * @desc: Pointer to device descriptor. - * @data: Pointer to device's entry memory. - * @dma: DMA pointer to &data. + * This function will initialize the DMA and skb descriptor + * to prepare the entry for the actual TX operation. */ -struct queue_entry_priv_pci_rx { - __le32 *desc; - dma_addr_t desc_dma; - - void *data; - dma_addr_t data_dma; -}; +int rt2x00pci_write_tx_data(struct queue_entry *entry); /** - * struct queue_entry_priv_pci_tx: Per TX entry PCI specific information + * struct queue_entry_priv_pci: Per entry PCI specific information * * @desc: Pointer to device descriptor + * @desc_dma: DMA pointer to &desc. * @data: Pointer to device's entry memory. - * @dma: DMA pointer to &data. - * @control: mac80211 control structure used to transmit data. + * @data_dma: DMA pointer to &data. */ -struct queue_entry_priv_pci_tx { +struct queue_entry_priv_pci { __le32 *desc; dma_addr_t desc_dma; - - void *data; - dma_addr_t data_dma; - - struct ieee80211_tx_control control; }; /** @@ -133,15 +115,6 @@ struct queue_entry_priv_pci_tx { */ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev); -/** - * rt2x00pci_txdone - Handle TX done events - * @rt2x00dev: Device pointer, see &struct rt2x00_dev. - * @entry: Entry which has completed the transmission of a frame. - * @desc: TX done descriptor - */ -void rt2x00pci_txdone(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry, - struct txdone_entry_desc *desc); - /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 659e9f44c40c..7f442030f5ad 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -25,24 +25,370 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/dma-mapping.h> #include "rt2x00.h" #include "rt2x00lib.h" +struct sk_buff *rt2x00queue_alloc_rxskb(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) +{ + unsigned int frame_size; + unsigned int reserved_size; + struct sk_buff *skb; + struct skb_frame_desc *skbdesc; + + /* + * The frame size includes descriptor size, because the + * hardware directly receive the frame into the skbuffer. + */ + frame_size = entry->queue->data_size + entry->queue->desc_size; + + /* + * The payload should be aligned to a 4-byte boundary, + * this means we need at least 3 bytes for moving the frame + * into the correct offset. + */ + reserved_size = 4; + + /* + * Allocate skbuffer. + */ + skb = dev_alloc_skb(frame_size + reserved_size); + if (!skb) + return NULL; + + skb_reserve(skb, reserved_size); + skb_put(skb, frame_size); + + /* + * Populate skbdesc. + */ + skbdesc = get_skb_frame_desc(skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + + if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags)) { + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, + skb->data, + skb->len, + DMA_FROM_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; + } + + return skb; +} + +void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_TO_DEVICE); + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; +} +EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); + +void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_RX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_FROM_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_RX; + } + + if (skbdesc->flags & SKBDESC_DMA_MAPPED_TX) { + dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma, skb->len, + DMA_TO_DEVICE); + skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX; + } +} + +void rt2x00queue_free_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) +{ + if (!skb) + return; + + rt2x00queue_unmap_skb(rt2x00dev, skb); + dev_kfree_skb_any(skb); +} + +static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct ieee80211_rate *rate = + ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); + const struct rt2x00_rate *hwrate; + unsigned int data_length; + unsigned int duration; + unsigned int residual; + + memset(txdesc, 0, sizeof(*txdesc)); + + /* + * Initialize information from queue + */ + txdesc->queue = entry->queue->qid; + txdesc->cw_min = entry->queue->cw_min; + txdesc->cw_max = entry->queue->cw_max; + txdesc->aifs = entry->queue->aifs; + + /* Data length should be extended with 4 bytes for CRC */ + data_length = entry->skb->len + 4; + + /* + * Check whether this frame is to be acked. + */ + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) + __set_bit(ENTRY_TXD_ACK, &txdesc->flags); + + /* + * Check if this is a RTS/CTS frame + */ + if (ieee80211_is_rts(hdr->frame_control) || + ieee80211_is_cts(hdr->frame_control)) { + __set_bit(ENTRY_TXD_BURST, &txdesc->flags); + if (ieee80211_is_rts(hdr->frame_control)) + __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags); + else + __set_bit(ENTRY_TXD_CTS_FRAME, &txdesc->flags); + if (tx_info->control.rts_cts_rate_idx >= 0) + rate = + ieee80211_get_rts_cts_rate(rt2x00dev->hw, tx_info); + } + + /* + * Determine retry information. + */ + txdesc->retry_limit = tx_info->control.retry_limit; + if (tx_info->flags & IEEE80211_TX_CTL_LONG_RETRY_LIMIT) + __set_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags); + + /* + * Check if more fragments are pending + */ + if (ieee80211_has_morefrags(hdr->frame_control)) { + __set_bit(ENTRY_TXD_BURST, &txdesc->flags); + __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags); + } + + /* + * Beacons and probe responses require the tsf timestamp + * to be inserted into the frame. + */ + if (ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control)) + __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags); + + /* + * Determine with what IFS priority this frame should be send. + * Set ifs to IFS_SIFS when the this is not the first fragment, + * or this fragment came after RTS/CTS. + */ + if (test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags)) { + txdesc->ifs = IFS_SIFS; + } else if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) { + __set_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags); + txdesc->ifs = IFS_BACKOFF; + } else { + txdesc->ifs = IFS_SIFS; + } + + /* + * PLCP setup + * Length calculation depends on OFDM/CCK rate. + */ + hwrate = rt2x00_get_rate(rate->hw_value); + txdesc->signal = hwrate->plcp; + txdesc->service = 0x04; + + if (hwrate->flags & DEV_RATE_OFDM) { + __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags); + + txdesc->length_high = (data_length >> 6) & 0x3f; + txdesc->length_low = data_length & 0x3f; + } else { + /* + * Convert length to microseconds. + */ + residual = get_duration_res(data_length, hwrate->bitrate); + duration = get_duration(data_length, hwrate->bitrate); + + if (residual != 0) { + duration++; + + /* + * Check if we need to set the Length Extension + */ + if (hwrate->bitrate == 110 && residual <= 30) + txdesc->service |= 0x80; + } + + txdesc->length_high = (duration >> 8) & 0xff; + txdesc->length_low = duration & 0xff; + + /* + * When preamble is enabled we should set the + * preamble bit for the signal. + */ + if (rt2x00_get_rate_preamble(rate->hw_value)) + txdesc->signal |= 0x08; + } +} + +static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry, + struct txentry_desc *txdesc) +{ + struct data_queue *queue = entry->queue; + struct rt2x00_dev *rt2x00dev = queue->rt2x00dev; + + rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc); + + /* + * All processing on the frame has been completed, this means + * it is now ready to be dumped to userspace through debugfs. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb); + + /* + * Check if we need to kick the queue, there are however a few rules + * 1) Don't kick beacon queue + * 2) Don't kick unless this is the last in frame in a burst. + * When the burst flag is set, this frame is always followed + * by another frame which in some way are related to eachother. + * This is true for fragments, RTS or CTS-to-self frames. + * 3) Rule 2 can be broken when the available entries + * in the queue are less then a certain threshold. + */ + if (entry->queue->qid == QID_BEACON) + return; + + if (rt2x00queue_threshold(queue) || + !test_bit(ENTRY_TXD_BURST, &txdesc->flags)) + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, queue->qid); +} + +int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb) +{ + struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); + struct txentry_desc txdesc; + struct skb_frame_desc *skbdesc; + + if (unlikely(rt2x00queue_full(queue))) + return -EINVAL; + + if (__test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { + ERROR(queue->rt2x00dev, + "Arrived at non-free entry in the non-full queue %d.\n" + "Please file bug report to %s.\n", + queue->qid, DRV_PROJECT); + return -EINVAL; + } + + /* + * Copy all TX descriptor information into txdesc, + * after that we are free to use the skb->cb array + * for our information. + */ + entry->skb = skb; + rt2x00queue_create_tx_descriptor(entry, &txdesc); + + /* + * skb->cb array is now ours and we are free to use it. + */ + skbdesc = get_skb_frame_desc(entry->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->entry = entry; + + if (unlikely(queue->rt2x00dev->ops->lib->write_tx_data(entry))) { + __clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + return -EIO; + } + + if (test_bit(DRIVER_REQUIRE_DMA, &queue->rt2x00dev->flags)) + rt2x00queue_map_txskb(queue->rt2x00dev, skb); + + __set_bit(ENTRY_DATA_PENDING, &entry->flags); + + rt2x00queue_index_inc(queue, Q_INDEX); + rt2x00queue_write_tx_descriptor(entry, &txdesc); + + return 0; +} + +int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev, + struct ieee80211_vif *vif) +{ + struct rt2x00_intf *intf = vif_to_intf(vif); + struct skb_frame_desc *skbdesc; + struct txentry_desc txdesc; + __le32 desc[16]; + + if (unlikely(!intf->beacon)) + return -ENOBUFS; + + intf->beacon->skb = ieee80211_beacon_get(rt2x00dev->hw, vif); + if (!intf->beacon->skb) + return -ENOMEM; + + /* + * Copy all TX descriptor information into txdesc, + * after that we are free to use the skb->cb array + * for our information. + */ + rt2x00queue_create_tx_descriptor(intf->beacon, &txdesc); + + /* + * For the descriptor we use a local array from where the + * driver can move it to the correct location required for + * the hardware. + */ + memset(desc, 0, sizeof(desc)); + + /* + * Fill in skb descriptor + */ + skbdesc = get_skb_frame_desc(intf->beacon->skb); + memset(skbdesc, 0, sizeof(*skbdesc)); + skbdesc->desc = desc; + skbdesc->desc_len = intf->beacon->queue->desc_size; + skbdesc->entry = intf->beacon; + + /* + * Write TX descriptor into reserved room in front of the beacon. + */ + rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc); + + /* + * Send beacon to hardware. + * Also enable beacon generation, which might have been disabled + * by the driver during the config_beacon() callback function. + */ + rt2x00dev->ops->lib->write_beacon(intf->beacon); + rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, QID_BEACON); + + return 0; +} + struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { int atim = test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags); - if (queue < rt2x00dev->hw->queues && rt2x00dev->tx) + if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx) return &rt2x00dev->tx[queue]; if (!rt2x00dev->bcn) return NULL; - if (queue == RT2X00_BCN_QUEUE_BEACON) + if (queue == QID_BEACON) return &rt2x00dev->bcn[0]; - else if (queue == RT2X00_BCN_QUEUE_ATIM && atim) + else if (queue == QID_ATIM && atim) return &rt2x00dev->bcn[1]; return NULL; @@ -96,7 +442,6 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index) spin_unlock_irqrestore(&queue->lock, irqflags); } -EXPORT_SYMBOL_GPL(rt2x00queue_index_inc); static void rt2x00queue_reset(struct data_queue *queue) { @@ -153,6 +498,7 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, rt2x00queue_reset(queue); queue->limit = qdesc->entry_num; + queue->threshold = DIV_ROUND_UP(qdesc->entry_num, 10); queue->data_size = qdesc->data_size; queue->desc_size = qdesc->desc_size; @@ -185,12 +531,41 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue, return 0; } +static void rt2x00queue_free_skbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + unsigned int i; + + if (!queue->entries) + return; + + for (i = 0; i < queue->limit; i++) { + if (queue->entries[i].skb) + rt2x00queue_free_skb(rt2x00dev, queue->entries[i].skb); + } +} + +static int rt2x00queue_alloc_rxskbs(struct rt2x00_dev *rt2x00dev, + struct data_queue *queue) +{ + unsigned int i; + struct sk_buff *skb; + + for (i = 0; i < queue->limit; i++) { + skb = rt2x00queue_alloc_rxskb(rt2x00dev, &queue->entries[i]); + if (!skb) + return -ENOMEM; + queue->entries[i].skb = skb; + } + + return 0; +} + int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; int status; - status = rt2x00queue_alloc_entries(rt2x00dev->rx, rt2x00dev->ops->rx); if (status) goto exit; @@ -205,11 +580,14 @@ int rt2x00queue_initialize(struct rt2x00_dev *rt2x00dev) if (status) goto exit; - if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - return 0; + if (test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) { + status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], + rt2x00dev->ops->atim); + if (status) + goto exit; + } - status = rt2x00queue_alloc_entries(&rt2x00dev->bcn[1], - rt2x00dev->ops->atim); + status = rt2x00queue_alloc_rxskbs(rt2x00dev, rt2x00dev->rx); if (status) goto exit; @@ -227,6 +605,8 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; + rt2x00queue_free_skbs(rt2x00dev, rt2x00dev->rx); + queue_for_each(rt2x00dev, queue) { kfree(queue->entries); queue->entries = NULL; @@ -255,11 +635,11 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) /* * We need the following queues: * RX: 1 - * TX: hw->queues + * TX: ops->tx_queues * Beacon: 1 * Atim: 1 (if required) */ - rt2x00dev->data_queues = 2 + rt2x00dev->hw->queues + req_atim; + rt2x00dev->data_queues = 2 + rt2x00dev->ops->tx_queues + req_atim; queue = kzalloc(rt2x00dev->data_queues * sizeof(*queue), GFP_KERNEL); if (!queue) { @@ -272,7 +652,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->rx = queue; rt2x00dev->tx = &queue[1]; - rt2x00dev->bcn = &queue[1 + rt2x00dev->hw->queues]; + rt2x00dev->bcn = &queue[1 + rt2x00dev->ops->tx_queues]; /* * Initialize queue parameters. @@ -280,7 +660,8 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) * TX: qid = QID_AC_BE + index * TX: cw_min: 2^5 = 32. * TX: cw_max: 2^10 = 1024. - * BCN & Atim: qid = QID_MGMT + * BCN: qid = QID_BEACON + * ATIM: qid = QID_ATIM */ rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX); @@ -288,9 +669,9 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev) tx_queue_for_each(rt2x00dev, queue) rt2x00queue_init(rt2x00dev, queue, qid++); - rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_MGMT); + rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[0], QID_BEACON); if (req_atim) - rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_MGMT); + rt2x00queue_init(rt2x00dev, &rt2x00dev->bcn[1], QID_ATIM); return 0; } diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index 7027c9f47d3f..8945945c892e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -42,18 +42,32 @@ /** * DOC: Number of entries per queue * - * After research it was concluded that 12 entries in a RX and TX - * queue would be sufficient. Although this is almost one third of - * the amount the legacy driver allocated, the queues aren't getting - * filled to the maximum even when working with the maximum rate. + * Under normal load without fragmentation 12 entries are sufficient + * without the queue being filled up to the maximum. When using fragmentation + * and the queue threshold code we need to add some additional margins to + * make sure the queue will never (or only under extreme load) fill up + * completely. + * Since we don't use preallocated DMA having a large number of queue entries + * will have only minimal impact on the memory requirements for the queue. */ -#define RX_ENTRIES 12 -#define TX_ENTRIES 12 +#define RX_ENTRIES 24 +#define TX_ENTRIES 24 #define BEACON_ENTRIES 1 -#define ATIM_ENTRIES 1 +#define ATIM_ENTRIES 8 /** * enum data_queue_qid: Queue identification + * + * @QID_AC_BE: AC BE queue + * @QID_AC_BK: AC BK queue + * @QID_AC_VI: AC VI queue + * @QID_AC_VO: AC VO queue + * @QID_HCCA: HCCA queue + * @QID_MGMT: MGMT queue (prio queue) + * @QID_RX: RX queue + * @QID_OTHER: None of the above (don't use, only present for completeness) + * @QID_BEACON: Beacon queue (value unspecified, don't send it to device) + * @QID_ATIM: Atim queue (value unspeficied, don't send it to device) */ enum data_queue_qid { QID_AC_BE = 0, @@ -64,68 +78,55 @@ enum data_queue_qid { QID_MGMT = 13, QID_RX = 14, QID_OTHER = 15, -}; - -/** - * enum rt2x00_bcn_queue: Beacon queue index - * - * Start counting with a high offset, this because this enumeration - * supplements &enum ieee80211_tx_queue and we should prevent value - * conflicts. - * - * @RT2X00_BCN_QUEUE_BEACON: Beacon queue - * @RT2X00_BCN_QUEUE_ATIM: Atim queue (sends frame after beacon) - */ -enum rt2x00_bcn_queue { - RT2X00_BCN_QUEUE_BEACON = 100, - RT2X00_BCN_QUEUE_ATIM = 101, + QID_BEACON, + QID_ATIM, }; /** * enum skb_frame_desc_flags: Flags for &struct skb_frame_desc * - * @FRAME_DESC_DRIVER_GENERATED: Frame was generated inside driver - * and should not be reported back to mac80211 during txdone. + * @SKBDESC_DMA_MAPPED_RX: &skb_dma field has been mapped for RX + * @SKBDESC_DMA_MAPPED_TX: &skb_dma field has been mapped for TX */ enum skb_frame_desc_flags { - FRAME_DESC_DRIVER_GENERATED = 1 << 0, + SKBDESC_DMA_MAPPED_RX = (1 << 0), + SKBDESC_DMA_MAPPED_TX = (1 << 1), }; /** * struct skb_frame_desc: Descriptor information for the skb buffer * - * This structure is placed over the skb->cb array, this means that - * this structure should not exceed the size of that array (48 bytes). + * This structure is placed over the driver_data array, this means that + * this structure should not exceed the size of that array (40 bytes). * * @flags: Frame flags, see &enum skb_frame_desc_flags. - * @frame_type: Frame type, see &enum rt2x00_dump_type. - * @data: Pointer to data part of frame (Start of ieee80211 header). + * @desc_len: Length of the frame descriptor. * @desc: Pointer to descriptor part of the frame. * Note that this pointer could point to something outside * of the scope of the skb->data pointer. - * @data_len: Length of the frame data. - * @desc_len: Length of the frame descriptor. - + * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. * @entry: The entry to which this sk buffer belongs. */ struct skb_frame_desc { unsigned int flags; - unsigned int frame_type; - - void *data; + unsigned int desc_len; void *desc; - unsigned int data_len; - unsigned int desc_len; + dma_addr_t skb_dma; struct queue_entry *entry; }; +/** + * get_skb_frame_desc - Obtain the rt2x00 frame descriptor from a sk_buff. + * @skb: &struct sk_buff from where we obtain the &struct skb_frame_desc + */ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb) { - BUILD_BUG_ON(sizeof(struct skb_frame_desc) > sizeof(skb->cb)); - return (struct skb_frame_desc *)&skb->cb[0]; + BUILD_BUG_ON(sizeof(struct skb_frame_desc) > + IEEE80211_TX_INFO_DRIVER_DATA_SIZE); + return (struct skb_frame_desc *)&IEEE80211_SKB_CB(skb)->driver_data; } /** @@ -145,6 +146,7 @@ enum rxdone_entry_desc_flags { * * Summary of information that has been read from the RX frame descriptor. * + * @timestamp: RX Timestamp * @signal: Signal of the received frame. * @rssi: RSSI of the received frame. * @size: Data size of the received frame. @@ -153,6 +155,7 @@ enum rxdone_entry_desc_flags { */ struct rxdone_entry_desc { + u64 timestamp; int signal; int rssi; int size; @@ -161,18 +164,32 @@ struct rxdone_entry_desc { }; /** + * enum txdone_entry_desc_flags: Flags for &struct txdone_entry_desc + * + * @TXDONE_UNKNOWN: Hardware could not determine success of transmission. + * @TXDONE_SUCCESS: Frame was successfully send + * @TXDONE_FAILURE: Frame was not successfully send + * @TXDONE_EXCESSIVE_RETRY: In addition to &TXDONE_FAILURE, the + * frame transmission failed due to excessive retries. + */ +enum txdone_entry_desc_flags { + TXDONE_UNKNOWN = 1 << 0, + TXDONE_SUCCESS = 1 << 1, + TXDONE_FAILURE = 1 << 2, + TXDONE_EXCESSIVE_RETRY = 1 << 3, +}; + +/** * struct txdone_entry_desc: TX done entry descriptor * * Summary of information that has been read from the TX frame descriptor * after the device is done with transmission. * - * @control: Control structure which was used to transmit the frame. - * @status: TX status (See &enum tx_status). + * @flags: TX done flags (See &enum txdone_entry_desc_flags). * @retry: Retry count. */ struct txdone_entry_desc { - struct ieee80211_tx_control *control; - int status; + unsigned long flags; int retry; }; @@ -180,19 +197,25 @@ struct txdone_entry_desc { * enum txentry_desc_flags: Status flags for TX entry descriptor * * @ENTRY_TXD_RTS_FRAME: This frame is a RTS frame. + * @ENTRY_TXD_CTS_FRAME: This frame is a CTS-to-self frame. * @ENTRY_TXD_OFDM_RATE: This frame is send out with an OFDM rate. + * @ENTRY_TXD_FIRST_FRAGMENT: This is the first frame. * @ENTRY_TXD_MORE_FRAG: This frame is followed by another fragment. * @ENTRY_TXD_REQ_TIMESTAMP: Require timestamp to be inserted. * @ENTRY_TXD_BURST: This frame belongs to the same burst event. * @ENTRY_TXD_ACK: An ACK is required for this frame. + * @ENTRY_TXD_RETRY_MODE: When set, the long retry count is used. */ enum txentry_desc_flags { ENTRY_TXD_RTS_FRAME, + ENTRY_TXD_CTS_FRAME, ENTRY_TXD_OFDM_RATE, + ENTRY_TXD_FIRST_FRAGMENT, ENTRY_TXD_MORE_FRAG, ENTRY_TXD_REQ_TIMESTAMP, ENTRY_TXD_BURST, ENTRY_TXD_ACK, + ENTRY_TXD_RETRY_MODE, }; /** @@ -206,6 +229,7 @@ enum txentry_desc_flags { * @length_low: PLCP length low word. * @signal: PLCP signal. * @service: PLCP service. + * @retry_limit: Max number of retries. * @aifs: AIFS value. * @ifs: IFS value. * @cw_min: cwmin value. @@ -221,10 +245,11 @@ struct txentry_desc { u16 signal; u16 service; - int aifs; - int ifs; - int cw_min; - int cw_max; + short retry_limit; + short aifs; + short ifs; + short cw_min; + short cw_max; }; /** @@ -239,12 +264,14 @@ struct txentry_desc { * @ENTRY_OWNER_DEVICE_CRYPTO: This entry is owned by the device for data * encryption or decryption. The entry should only be touched after * the device has signaled it is done with it. + * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting + * for the signal to start sending. */ - enum queue_entry_flags { ENTRY_BCN_ASSIGNED, ENTRY_OWNER_DEVICE_DATA, ENTRY_OWNER_DEVICE_CRYPTO, + ENTRY_DATA_PENDING, }; /** @@ -302,6 +329,7 @@ enum queue_index { * index corruption due to concurrency. * @count: Number of frames handled in the queue. * @limit: Maximum number of entries in the queue. + * @threshold: Minimum number of free entries before queue is kicked by force. * @length: Number of frames in queue. * @index: Index pointers to entry positions in the queue, * use &enum queue_index to get a specific index field. @@ -320,6 +348,7 @@ struct data_queue { spinlock_t lock; unsigned int count; unsigned short limit; + unsigned short threshold; unsigned short length; unsigned short index[Q_INDEX_MAX]; @@ -369,7 +398,7 @@ struct data_queue_desc { * the end of the TX queue array. */ #define tx_queue_end(__dev) \ - &(__dev)->tx[(__dev)->hw->queues] + &(__dev)->tx[(__dev)->ops->tx_queues] /** * queue_loop - Loop through the queues within a specific range (HELPER MACRO). @@ -444,6 +473,15 @@ static inline int rt2x00queue_available(struct data_queue *queue) } /** + * rt2x00queue_threshold - Check if the queue is below threshold + * @queue: Queue to check. + */ +static inline int rt2x00queue_threshold(struct data_queue *queue) +{ + return rt2x00queue_available(queue) < queue->threshold; +} + +/** * rt2x00_desc_read - Read a word from the hardware descriptor. * @desc: Base descriptor address * @word: Word index from where the descriptor should be read. diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 0325bed2fbf5..7e88ce5651b9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -27,17 +27,6 @@ #define RT2X00REG_H /* - * TX result flags. - */ -enum tx_status { - TX_SUCCESS = 0, - TX_SUCCESS_RETRY = 1, - TX_FAIL_RETRY = 2, - TX_FAIL_INVALID = 3, - TX_FAIL_OTHER = 4, -}; - -/* * Antenna values */ enum antenna { @@ -141,83 +130,107 @@ struct rt2x00_field32 { /* * Power of two check, this will check - * if the mask that has been given contains - * and contiguous set of bits. + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. */ #define is_power_of_two(x) ( !((x) & ((x)-1)) ) #define low_bit_mask(x) ( ((x)-1) & ~(x) ) #define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) +/* + * Macro's to find first set bit in a variable. + * These macro's behaves the same as the __ffs() function with + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + __builtin_choose_expr(((__x) & 0x1), 0, 1) + +#define compile_ffs4(__x) \ + __builtin_choose_expr(((__x) & 0x3), \ + (compile_ffs2((__x))), \ + (compile_ffs2((__x) >> 2) + 2)) + +#define compile_ffs8(__x) \ + __builtin_choose_expr(((__x) & 0xf), \ + (compile_ffs4((__x))), \ + (compile_ffs4((__x) >> 4) + 4)) + +#define compile_ffs16(__x) \ + __builtin_choose_expr(((__x) & 0xff), \ + (compile_ffs8((__x))), \ + (compile_ffs8((__x) >> 8) + 8)) + +#define compile_ffs32(__x) \ + __builtin_choose_expr(((__x) & 0xffff), \ + (compile_ffs16((__x))), \ + (compile_ffs16((__x) >> 16) + 16)) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask, __type) \ + BUILD_BUG_ON(!__builtin_constant_p(__mask) || \ + !(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (__type)(__mask)) \ + #define FIELD8(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u8)(__mask)); \ + FIELD_CHECK(__mask, u8); \ (struct rt2x00_field8) { \ - __ffs(__mask), (__mask) \ + compile_ffs8(__mask), (__mask) \ }; \ }) #define FIELD16(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u16)(__mask));\ + FIELD_CHECK(__mask, u16); \ (struct rt2x00_field16) { \ - __ffs(__mask), (__mask) \ + compile_ffs16(__mask), (__mask) \ }; \ }) #define FIELD32(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u32)(__mask));\ + FIELD_CHECK(__mask, u32); \ (struct rt2x00_field32) { \ - __ffs(__mask), (__mask) \ + compile_ffs32(__mask), (__mask) \ }; \ }) -static inline void rt2x00_set_field32(u32 *reg, - const struct rt2x00_field32 field, - const u32 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u32 rt2x00_get_field32(const u32 reg, - const struct rt2x00_field32 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field16(u16 *reg, - const struct rt2x00_field16 field, - const u16 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u16 rt2x00_get_field16(const u16 reg, - const struct rt2x00_field16 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} - -static inline void rt2x00_set_field8(u8 *reg, - const struct rt2x00_field8 field, - const u8 value) -{ - *reg &= ~(field.bit_mask); - *reg |= (value << field.bit_offset) & field.bit_mask; -} - -static inline u8 rt2x00_get_field8(const u8 reg, - const struct rt2x00_field8 field) -{ - return (reg & field.bit_mask) >> field.bit_offset; -} +#define SET_FIELD(__reg, __type, __field, __value)\ +({ \ + typecheck(__type, __field); \ + *(__reg) &= ~((__field).bit_mask); \ + *(__reg) |= ((__value) << \ + ((__field).bit_offset)) & \ + ((__field).bit_mask); \ +}) + +#define GET_FIELD(__reg, __type, __field) \ +({ \ + typecheck(__type, __field); \ + ((__reg) & ((__field).bit_mask)) >> \ + ((__field).bit_offset); \ +}) + +#define rt2x00_set_field32(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field32, __field, __value) +#define rt2x00_get_field32(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field32, __field) + +#define rt2x00_set_field16(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field16, __field, __value) +#define rt2x00_get_field16(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field16, __field) + +#define rt2x00_set_field8(__reg, __field, __value) \ + SET_FIELD(__reg, struct rt2x00_field8, __field, __value) +#define rt2x00_get_field8(__reg, __field) \ + GET_FIELD(__reg, struct rt2x00_field8, __field) #endif /* RT2X00REG_H */ diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index fcef9885ab5e..04b29716d356 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -23,7 +23,6 @@ Abstract: rt2x00 rfkill routines. */ -#include <linux/input-polldev.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/rfkill.h> @@ -45,28 +44,51 @@ static int rt2x00rfkill_toggle_radio(void *data, enum rfkill_state state) if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags)) return 0; - if (state == RFKILL_STATE_ON) { + if (state == RFKILL_STATE_UNBLOCKED) { INFO(rt2x00dev, "Hardware button pressed, enabling radio.\n"); __clear_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); retval = rt2x00lib_enable_radio(rt2x00dev); - } else if (state == RFKILL_STATE_OFF) { + } else if (state == RFKILL_STATE_SOFT_BLOCKED) { INFO(rt2x00dev, "Hardware button pressed, disabling radio.\n"); __set_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags); rt2x00lib_disable_radio(rt2x00dev); + } else { + WARNING(rt2x00dev, "Received unexpected rfkill state %d.\n", + state); } return retval; } -static void rt2x00rfkill_poll(struct input_polled_dev *poll_dev) +static int rt2x00rfkill_get_state(void *data, enum rfkill_state *state) { - struct rt2x00_dev *rt2x00dev = poll_dev->private; - int state = rt2x00dev->ops->lib->rfkill_poll(rt2x00dev); + struct rt2x00_dev *rt2x00dev = data; - if (rt2x00dev->rfkill->state != state) { - input_report_key(poll_dev->input, KEY_WLAN, 1); - input_report_key(poll_dev->input, KEY_WLAN, 0); - } + *state = rt2x00dev->rfkill->state; + + return 0; +} + +static void rt2x00rfkill_poll(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, rfkill_work.work); + int state; + + if (!test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) + return; + + /* + * rfkill_poll reports 1 when the key has been pressed and the + * radio should be blocked. + */ + state = !rt2x00dev->ops->lib->rfkill_poll(rt2x00dev) ? + RFKILL_STATE_UNBLOCKED : RFKILL_STATE_SOFT_BLOCKED; + + rfkill_force_state(rt2x00dev->rfkill, state); + + queue_delayed_work(rt2x00dev->hw->workqueue, + &rt2x00dev->rfkill_work, RFKILL_POLL_INTERVAL); } void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) @@ -80,12 +102,6 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) return; } - if (input_register_polled_device(rt2x00dev->poll_dev)) { - ERROR(rt2x00dev, "Failed to register polled device.\n"); - rfkill_unregister(rt2x00dev->rfkill); - return; - } - __set_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); /* @@ -93,7 +109,7 @@ void rt2x00rfkill_register(struct rt2x00_dev *rt2x00dev) * and correctly sends the signal to the rfkill layer about this * state. */ - rt2x00rfkill_poll(rt2x00dev->poll_dev); + rt2x00rfkill_poll(&rt2x00dev->rfkill_work.work); } void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) @@ -102,38 +118,13 @@ void rt2x00rfkill_unregister(struct rt2x00_dev *rt2x00dev) !test_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state)) return; - input_unregister_polled_device(rt2x00dev->poll_dev); + cancel_delayed_work_sync(&rt2x00dev->rfkill_work); + rfkill_unregister(rt2x00dev->rfkill); __clear_bit(RFKILL_STATE_REGISTERED, &rt2x00dev->rfkill_state); } -static struct input_polled_dev * -rt2x00rfkill_allocate_polldev(struct rt2x00_dev *rt2x00dev) -{ - struct input_polled_dev *poll_dev; - - poll_dev = input_allocate_polled_device(); - if (!poll_dev) - return NULL; - - poll_dev->private = rt2x00dev; - poll_dev->poll = rt2x00rfkill_poll; - poll_dev->poll_interval = RFKILL_POLL_INTERVAL; - - poll_dev->input->name = rt2x00dev->ops->name; - poll_dev->input->phys = wiphy_name(rt2x00dev->hw->wiphy); - poll_dev->input->id.bustype = BUS_HOST; - poll_dev->input->id.vendor = 0x1814; - poll_dev->input->id.product = rt2x00dev->chip.rt; - poll_dev->input->id.version = rt2x00dev->chip.rev; - poll_dev->input->dev.parent = wiphy_dev(rt2x00dev->hw->wiphy); - poll_dev->input->evbit[0] = BIT(EV_KEY); - set_bit(KEY_WLAN, poll_dev->input->keybit); - - return poll_dev; -} - void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) { if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags)) @@ -150,14 +141,9 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) rt2x00dev->rfkill->data = rt2x00dev; rt2x00dev->rfkill->state = -1; rt2x00dev->rfkill->toggle_radio = rt2x00rfkill_toggle_radio; + rt2x00dev->rfkill->get_state = rt2x00rfkill_get_state; - rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); - if (!rt2x00dev->poll_dev) { - ERROR(rt2x00dev, "Failed to allocate polled device.\n"); - rfkill_free(rt2x00dev->rfkill); - rt2x00dev->rfkill = NULL; - return; - } + INIT_DELAYED_WORK(&rt2x00dev->rfkill_work, rt2x00rfkill_poll); return; } @@ -168,32 +154,8 @@ void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; - input_free_polled_device(rt2x00dev->poll_dev); - rt2x00dev->poll_dev = NULL; + cancel_delayed_work_sync(&rt2x00dev->rfkill_work); rfkill_free(rt2x00dev->rfkill); rt2x00dev->rfkill = NULL; } - -void rt2x00rfkill_suspend(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || - !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) - return; - - input_free_polled_device(rt2x00dev->poll_dev); - rt2x00dev->poll_dev = NULL; -} - -void rt2x00rfkill_resume(struct rt2x00_dev *rt2x00dev) -{ - if (!test_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags) || - !test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) - return; - - rt2x00dev->poll_dev = rt2x00rfkill_allocate_polldev(rt2x00dev); - if (!rt2x00dev->poll_dev) { - ERROR(rt2x00dev, "Failed to allocate polled device.\n"); - return; - } -} diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index e5ceae805b57..83862e7f7aec 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -40,7 +40,7 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, void *buffer, const u16 buffer_length, const int timeout) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); int status; unsigned int i; unsigned int pipe = @@ -129,17 +129,12 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data; struct txdone_entry_desc txdesc; - __le32 *txd = (__le32 *)entry->skb->data; - u32 word; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !__test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; - rt2x00_desc_read(txd, 0, &word); - /* * Remove the descriptor data from the buffer. */ @@ -147,128 +142,116 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb) /* * Obtain the status about this packet. + * Note that when the status is 0 it does not mean the + * frame was send out correctly. It only means the frame + * was succesfully pushed to the hardware, we have no + * way to determine the transmission status right now. + * (Only indirectly by looking at the failed TX counters + * in the register). */ - txdesc.status = !urb->status ? TX_SUCCESS : TX_FAIL_RETRY; + if (!urb->status) + __set_bit(TXDONE_UNKNOWN, &txdesc.flags); + else + __set_bit(TXDONE_FAILURE, &txdesc.flags); txdesc.retry = 0; - txdesc.control = &priv_tx->control; rt2x00lib_txdone(entry, &txdesc); - - /* - * Make this entry available for reuse. - */ - entry->flags = 0; - rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE); - - /* - * If the data queue was full before the txdone handler - * we must make sure the packet queue in the mac80211 stack - * is reenabled when the txdone handler has finished. - */ - if (!rt2x00queue_full(entry->queue)) - ieee80211_wake_queue(rt2x00dev->hw, priv_tx->control.queue); } -int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_tx_control *control) +int rt2x00usb_write_tx_data(struct queue_entry *entry) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); - struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX); - struct queue_entry_priv_usb_tx *priv_tx = entry->priv_data; + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); + struct queue_entry_priv_usb *entry_priv = entry->priv_data; struct skb_frame_desc *skbdesc; u32 length; - if (rt2x00queue_full(queue)) - return -EINVAL; - - if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) { - ERROR(rt2x00dev, - "Arrived at non-free entry in the non-full queue %d.\n" - "Please file bug report to %s.\n", - control->queue, DRV_PROJECT); - return -EINVAL; - } - /* * Add the descriptor in front of the skb. */ - skb_push(skb, queue->desc_size); - memset(skb->data, 0, queue->desc_size); + skb_push(entry->skb, entry->queue->desc_size); + memset(entry->skb->data, 0, entry->queue->desc_size); /* * Fill in skb descriptor */ - skbdesc = get_skb_frame_desc(skb); - skbdesc->data = skb->data + queue->desc_size; - skbdesc->data_len = skb->len - queue->desc_size; - skbdesc->desc = skb->data; - skbdesc->desc_len = queue->desc_size; - skbdesc->entry = entry; - - memcpy(&priv_tx->control, control, sizeof(priv_tx->control)); - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); + skbdesc = get_skb_frame_desc(entry->skb); + skbdesc->desc = entry->skb->data; + skbdesc->desc_len = entry->queue->desc_size; /* * USB devices cannot blindly pass the skb->len as the * length of the data to usb_fill_bulk_urb. Pass the skb * to the driver to determine what the length should be. */ - length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, skb); - - /* - * Initialize URB and send the frame to the device. - */ - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_fill_bulk_urb(priv_tx->urb, usb_dev, usb_sndbulkpipe(usb_dev, 1), - skb->data, length, rt2x00usb_interrupt_txdone, entry); - usb_submit_urb(priv_tx->urb, GFP_ATOMIC); + length = rt2x00dev->ops->lib->get_tx_data_len(rt2x00dev, entry->skb); - rt2x00queue_index_inc(queue, Q_INDEX); + usb_fill_bulk_urb(entry_priv->urb, usb_dev, + usb_sndbulkpipe(usb_dev, 1), + entry->skb->data, length, + rt2x00usb_interrupt_txdone, entry); return 0; } EXPORT_SYMBOL_GPL(rt2x00usb_write_tx_data); -/* - * RX data handlers. - */ -static struct sk_buff* rt2x00usb_alloc_rxskb(struct data_queue *queue) +static inline void rt2x00usb_kick_tx_entry(struct queue_entry *entry) { - struct sk_buff *skb; - unsigned int frame_size; + struct queue_entry_priv_usb *entry_priv = entry->priv_data; + + if (__test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags)) + usb_submit_urb(entry_priv->urb, GFP_ATOMIC); +} + +void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid) +{ + struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, qid); + unsigned long irqflags; + unsigned int index; + unsigned int index_done; + unsigned int i; /* - * As alignment we use 2 and not NET_IP_ALIGN because we need - * to be sure we have 2 bytes room in the head. (NET_IP_ALIGN - * can be 0 on some hardware). We use these 2 bytes for frame - * alignment later, we assume that the chance that - * header_size % 4 == 2 is bigger then header_size % 2 == 0 - * and thus optimize alignment by reserving the 2 bytes in - * advance. + * Only protect the range we are going to loop over, + * if during our loop a extra entry is set to pending + * it should not be kicked during this run, since it + * is part of another TX operation. */ - frame_size = queue->data_size + queue->desc_size; - skb = dev_alloc_skb(queue->desc_size + frame_size + 2); - if (!skb) - return NULL; - - skb_reserve(skb, queue->desc_size + 2); - skb_put(skb, frame_size); + spin_lock_irqsave(&queue->lock, irqflags); + index = queue->index[Q_INDEX]; + index_done = queue->index[Q_INDEX_DONE]; + spin_unlock_irqrestore(&queue->lock, irqflags); - return skb; + /* + * Start from the TX done pointer, this guarentees that we will + * send out all frames in the correct order. + */ + if (index_done < index) { + for (i = index_done; i < index; i++) + rt2x00usb_kick_tx_entry(&queue->entries[i]); + } else { + for (i = index_done; i < queue->limit; i++) + rt2x00usb_kick_tx_entry(&queue->entries[i]); + + for (i = 0; i < index; i++) + rt2x00usb_kick_tx_entry(&queue->entries[i]); + } } +EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue); +/* + * RX data handlers. + */ static void rt2x00usb_interrupt_rxdone(struct urb *urb) { struct queue_entry *entry = (struct queue_entry *)urb->context; struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct sk_buff *skb; - struct skb_frame_desc *skbdesc; - struct rxdone_entry_desc rxdesc; - int header_size; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u8 rxd[32]; if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) || - !test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) + !test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags)) return; /* @@ -276,61 +259,22 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb) * to be actually valid, or if the urb is signaling * a problem. */ - if (urb->actual_length < entry->queue->desc_size || urb->status) - goto skip_entry; - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(entry->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->entry = entry; - - memset(&rxdesc, 0, sizeof(rxdesc)); - rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); - - /* - * The data behind the ieee80211 header must be - * aligned on a 4 byte boundary. - */ - header_size = ieee80211_get_hdrlen_from_skb(entry->skb); - if (header_size % 4 == 0) { - skb_push(entry->skb, 2); - memmove(entry->skb->data, entry->skb->data + 2, - entry->skb->len - 2); - skbdesc->data = entry->skb->data; - skb_trim(entry->skb,entry->skb->len - 2); + if (urb->actual_length < entry->queue->desc_size || urb->status) { + __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + usb_submit_urb(urb, GFP_ATOMIC); + return; } /* - * Allocate a new sk buffer to replace the current one. - * If allocation fails, we should drop the current frame - * so we can recycle the existing sk buffer for the new frame. + * Fill in desc fields of the skb descriptor */ - skb = rt2x00usb_alloc_rxskb(entry->queue); - if (!skb) - goto skip_entry; + skbdesc->desc = rxd; + skbdesc->desc_len = entry->queue->desc_size; /* * Send the frame to rt2x00lib for further processing. */ - rt2x00lib_rxdone(entry, &rxdesc); - - /* - * Replace current entry's skb with the newly allocated one, - * and reinitialize the urb. - */ - entry->skb = skb; - urb->transfer_buffer = entry->skb->data; - urb->transfer_buffer_length = entry->skb->len; - -skip_entry: - if (test_bit(DEVICE_ENABLED_RADIO, &entry->queue->rt2x00dev->flags)) { - __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(urb, GFP_ATOMIC); - } - - rt2x00queue_index_inc(entry->queue, Q_INDEX); + rt2x00lib_rxdone(rt2x00dev, entry); } /* @@ -338,27 +282,21 @@ skip_entry: */ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_usb_rx *priv_rx; - struct queue_entry_priv_usb_tx *priv_tx; - struct queue_entry_priv_usb_bcn *priv_bcn; + struct queue_entry_priv_usb *entry_priv; + struct queue_entry_priv_usb_bcn *bcn_priv; struct data_queue *queue; unsigned int i; - rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0x0000, 0x0000, + rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0, REGISTER_TIMEOUT); /* * Cancel all queues. */ - for (i = 0; i < rt2x00dev->rx->limit; i++) { - priv_rx = rt2x00dev->rx->entries[i].priv_data; - usb_kill_urb(priv_rx->urb); - } - - tx_queue_for_each(rt2x00dev, queue) { + queue_for_each(rt2x00dev, queue) { for (i = 0; i < queue->limit; i++) { - priv_tx = queue->entries[i].priv_data; - usb_kill_urb(priv_tx->urb); + entry_priv = queue->entries[i].priv_data; + usb_kill_urb(entry_priv->urb); } } @@ -369,19 +307,9 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) return; for (i = 0; i < rt2x00dev->bcn->limit; i++) { - priv_bcn = rt2x00dev->bcn->entries[i].priv_data; - usb_kill_urb(priv_bcn->urb); - - if (priv_bcn->guardian_urb) - usb_kill_urb(priv_bcn->guardian_urb); - } - - if (!test_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags)) - return; - - for (i = 0; i < rt2x00dev->bcn[1].limit; i++) { - priv_tx = rt2x00dev->bcn[1].entries[i].priv_data; - usb_kill_urb(priv_tx->urb); + bcn_priv = rt2x00dev->bcn->entries[i].priv_data; + if (bcn_priv->guardian_urb) + usb_kill_urb(bcn_priv->guardian_urb); } } EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); @@ -392,16 +320,16 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio); void rt2x00usb_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct usb_device *usb_dev = rt2x00dev_usb_dev(rt2x00dev); - struct queue_entry_priv_usb_rx *priv_rx = entry->priv_data; + struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev); + struct queue_entry_priv_usb *entry_priv = entry->priv_data; - usb_fill_bulk_urb(priv_rx->urb, usb_dev, + usb_fill_bulk_urb(entry_priv->urb, usb_dev, usb_rcvbulkpipe(usb_dev, 1), entry->skb->data, entry->skb->len, rt2x00usb_interrupt_rxdone, entry); __set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); - usb_submit_urb(priv_rx->urb, GFP_ATOMIC); + usb_submit_urb(entry_priv->urb, GFP_ATOMIC); } EXPORT_SYMBOL_GPL(rt2x00usb_init_rxentry); @@ -415,38 +343,31 @@ EXPORT_SYMBOL_GPL(rt2x00usb_init_txentry); static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct queue_entry_priv_usb_rx *priv_rx; - struct queue_entry_priv_usb_tx *priv_tx; - struct queue_entry_priv_usb_bcn *priv_bcn; - struct urb *urb; - unsigned int guardian = - test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); + struct queue_entry_priv_usb *entry_priv; + struct queue_entry_priv_usb_bcn *bcn_priv; unsigned int i; + for (i = 0; i < queue->limit; i++) { + entry_priv = queue->entries[i].priv_data; + entry_priv->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!entry_priv->urb) + return -ENOMEM; + } + /* - * Allocate the URB's + * If this is not the beacon queue or + * no guardian byte was required for the beacon, + * then we are done. */ + if (rt2x00dev->bcn != queue || + !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) + return 0; + for (i = 0; i < queue->limit; i++) { - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) + bcn_priv = queue->entries[i].priv_data; + bcn_priv->guardian_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!bcn_priv->guardian_urb) return -ENOMEM; - - if (queue->qid == QID_RX) { - priv_rx = queue->entries[i].priv_data; - priv_rx->urb = urb; - } else if (queue->qid == QID_MGMT && guardian) { - priv_bcn = queue->entries[i].priv_data; - priv_bcn->urb = urb; - - urb = usb_alloc_urb(0, GFP_KERNEL); - if (!urb) - return -ENOMEM; - - priv_bcn->guardian_urb = urb; - } else { - priv_tx = queue->entries[i].priv_data; - priv_tx->urb = urb; - } } return 0; @@ -455,47 +376,39 @@ static int rt2x00usb_alloc_urb(struct rt2x00_dev *rt2x00dev, static void rt2x00usb_free_urb(struct rt2x00_dev *rt2x00dev, struct data_queue *queue) { - struct queue_entry_priv_usb_rx *priv_rx; - struct queue_entry_priv_usb_tx *priv_tx; - struct queue_entry_priv_usb_bcn *priv_bcn; - struct urb *urb; - unsigned int guardian = - test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags); + struct queue_entry_priv_usb *entry_priv; + struct queue_entry_priv_usb_bcn *bcn_priv; unsigned int i; if (!queue->entries) return; for (i = 0; i < queue->limit; i++) { - if (queue->qid == QID_RX) { - priv_rx = queue->entries[i].priv_data; - urb = priv_rx->urb; - } else if (queue->qid == QID_MGMT && guardian) { - priv_bcn = queue->entries[i].priv_data; - - usb_kill_urb(priv_bcn->guardian_urb); - usb_free_urb(priv_bcn->guardian_urb); - - urb = priv_bcn->urb; - } else { - priv_tx = queue->entries[i].priv_data; - urb = priv_tx->urb; - } + entry_priv = queue->entries[i].priv_data; + usb_kill_urb(entry_priv->urb); + usb_free_urb(entry_priv->urb); + } - usb_kill_urb(urb); - usb_free_urb(urb); - if (queue->entries[i].skb) - kfree_skb(queue->entries[i].skb); + /* + * If this is not the beacon queue or + * no guardian byte was required for the beacon, + * then we are done. + */ + if (rt2x00dev->bcn != queue || + !test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) + return; + + for (i = 0; i < queue->limit; i++) { + bcn_priv = queue->entries[i].priv_data; + usb_kill_urb(bcn_priv->guardian_urb); + usb_free_urb(bcn_priv->guardian_urb); } } int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; - struct sk_buff *skb; - unsigned int entry_size; - unsigned int i; - int uninitialized_var(status); + int status; /* * Allocate DMA @@ -506,18 +419,6 @@ int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev) goto exit; } - /* - * For the RX queue, skb's should be allocated. - */ - entry_size = rt2x00dev->rx->data_size + rt2x00dev->rx->desc_size; - for (i = 0; i < rt2x00dev->rx->limit; i++) { - skb = rt2x00usb_alloc_rxskb(rt2x00dev->rx); - if (!skb) - goto exit; - - rt2x00dev->rx->entries[i].skb = skb; - } - return 0; exit: @@ -596,7 +497,7 @@ int rt2x00usb_probe(struct usb_interface *usb_intf, usb_set_intfdata(usb_intf, hw); rt2x00dev = hw->priv; - rt2x00dev->dev = usb_intf; + rt2x00dev->dev = &usb_intf->dev; rt2x00dev->ops = ops; rt2x00dev->hw = hw; mutex_init(&rt2x00dev->usb_cache_mutex); diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 11e55180cbaf..aad794adf52c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -26,6 +26,12 @@ #ifndef RT2X00USB_H #define RT2X00USB_H +#define to_usb_device_intf(d) \ +({ \ + struct usb_interface *intf = to_usb_interface(d); \ + interface_to_usbdev(intf); \ +}) + /* * This variable should be used with the * usb_driver structure initialization. @@ -47,6 +53,20 @@ #define REGISTER_TIMEOUT 500 #define REGISTER_TIMEOUT_FIRMWARE 1000 +/** + * REGISTER_TIMEOUT16 - Determine the timeout for 16bit register access + * @__datalen: Data length + */ +#define REGISTER_TIMEOUT16(__datalen) \ + ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u16)) ) + +/** + * REGISTER_TIMEOUT32 - Determine the timeout for 32bit register access + * @__datalen: Data length + */ +#define REGISTER_TIMEOUT32(__datalen) \ + ( REGISTER_TIMEOUT * ((__datalen) / sizeof(u32)) ) + /* * Cache size */ @@ -185,13 +205,12 @@ static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, * kmalloc for correct handling inside the kernel USB layer. */ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, - __le16 *eeprom, const u16 lenght) + __le16 *eeprom, const u16 length) { - int timeout = REGISTER_TIMEOUT * (lenght / sizeof(u16)); - return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, USB_VENDOR_REQUEST_IN, 0, 0, - eeprom, lenght, timeout); + eeprom, length, + REGISTER_TIMEOUT16(length)); } /* @@ -199,55 +218,53 @@ static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, */ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); -/* - * TX data handlers. - */ -int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev, - struct data_queue *queue, struct sk_buff *skb, - struct ieee80211_tx_control *control); - /** - * struct queue_entry_priv_usb_rx: Per RX entry USB specific information + * rt2x00usb_write_tx_data - Initialize URB for TX operation + * @entry: The entry where the frame is located * - * @urb: Urb structure used for device communication. + * This function will initialize the URB and skb descriptor + * to prepare the entry for the actual TX operation. */ -struct queue_entry_priv_usb_rx { - struct urb *urb; -}; +int rt2x00usb_write_tx_data(struct queue_entry *entry); /** - * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * struct queue_entry_priv_usb: Per entry USB specific information * * @urb: Urb structure used for device communication. - * @control: mac80211 control structure used to transmit data. */ -struct queue_entry_priv_usb_tx { +struct queue_entry_priv_usb { struct urb *urb; - - struct ieee80211_tx_control control; }; /** - * struct queue_entry_priv_usb_tx: Per TX entry USB specific information + * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information * - * The first section should match &struct queue_entry_priv_usb_tx exactly. + * The first section should match &struct queue_entry_priv_usb exactly. * rt2500usb can use this structure to send a guardian byte when working * with beacons. * * @urb: Urb structure used for device communication. - * @control: mac80211 control structure used to transmit data. * @guardian_data: Set to 0, used for sending the guardian data. * @guardian_urb: Urb structure used to send the guardian data. */ struct queue_entry_priv_usb_bcn { struct urb *urb; - struct ieee80211_tx_control control; - unsigned int guardian_data; struct urb *guardian_urb; }; +/** + * rt2x00usb_kick_tx_queue - Kick data queue + * @rt2x00dev: Pointer to &struct rt2x00_dev + * @qid: Data queue to kick + * + * This will walk through all entries of the queue and push all pending + * frames to the hardware as a single burst. + */ +void rt2x00usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, + const enum data_queue_qid qid); + /* * Device initialization handlers. */ diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 580f90b63de7..f7c1f92c1448 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -330,6 +330,17 @@ static int rt61pci_blink_set(struct led_classdev *led_cdev, return 0; } + +static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt61pci_brightness_set; + led->led_dev.blink_set = rt61pci_blink_set; + led->flags = LED_INITIALIZED; +} #endif /* CONFIG_RT61PCI_LEDS */ /* @@ -1018,49 +1029,35 @@ static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, static void rt61pci_init_rxentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); u32 word; - rt2x00_desc_read(priv_rx->desc, 5, &word); + rt2x00_desc_read(entry_priv->desc, 5, &word); rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS, - priv_rx->data_dma); - rt2x00_desc_write(priv_rx->desc, 5, word); + skbdesc->skb_dma); + rt2x00_desc_write(entry_priv->desc, 5, word); - rt2x00_desc_read(priv_rx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1); - rt2x00_desc_write(priv_rx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static void rt61pci_init_txentry(struct rt2x00_dev *rt2x00dev, struct queue_entry *entry) { - struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word; - rt2x00_desc_read(priv_tx->desc, 1, &word); - rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); - rt2x00_desc_write(priv_tx->desc, 1, word); - - rt2x00_desc_read(priv_tx->desc, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); - rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx); - rt2x00_desc_write(priv_tx->desc, 5, word); - - rt2x00_desc_read(priv_tx->desc, 6, &word); - rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, - priv_tx->data_dma); - rt2x00_desc_write(priv_tx->desc, 6, word); - - rt2x00_desc_read(priv_tx->desc, 0, &word); + rt2x00_desc_read(entry_priv->desc, 0, &word); rt2x00_set_field32(&word, TXD_W0_VALID, 0); rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0); - rt2x00_desc_write(priv_tx->desc, 0, word); + rt2x00_desc_write(entry_priv->desc, 0, word); } static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) { - struct queue_entry_priv_pci_rx *priv_rx; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; u32 reg; /* @@ -1082,28 +1079,28 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00dev->tx[0].desc_size / 4); rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg); - priv_tx = rt2x00dev->tx[0].entries[0].priv_data; + entry_priv = rt2x00dev->tx[0].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, ®); rt2x00_set_field32(®, AC0_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[1].entries[0].priv_data; + entry_priv = rt2x00dev->tx[1].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, ®); rt2x00_set_field32(®, AC1_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[2].entries[0].priv_data; + entry_priv = rt2x00dev->tx[2].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, ®); rt2x00_set_field32(®, AC2_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg); - priv_tx = rt2x00dev->tx[3].entries[0].priv_data; + entry_priv = rt2x00dev->tx[3].entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, ®); rt2x00_set_field32(®, AC3_BASE_CSR_RING_REGISTER, - priv_tx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, ®); @@ -1113,10 +1110,10 @@ static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4); rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg); - priv_rx = rt2x00dev->rx->entries[0].priv_data; + entry_priv = rt2x00dev->rx->entries[0].priv_data; rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, ®); rt2x00_set_field32(®, RX_BASE_CSR_RING_REGISTER, - priv_rx->desc_dma); + entry_priv->desc_dma); rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg); rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, ®); @@ -1294,25 +1291,32 @@ static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; - u8 reg_id; u8 value; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt61pci_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt61pci_bbp_write(rt2x00dev, 3, 0x00); rt61pci_bbp_write(rt2x00dev, 15, 0x30); rt61pci_bbp_write(rt2x00dev, 21, 0xc8); @@ -1361,7 +1365,8 @@ static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev, rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg); } @@ -1413,17 +1418,10 @@ static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt61pci_init_queues(rt2x00dev) || - rt61pci_init_registers(rt2x00dev) || - rt61pci_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt61pci_init_queues(rt2x00dev) || + rt61pci_init_registers(rt2x00dev) || + rt61pci_init_bbp(rt2x00dev))) return -EIO; - } - - /* - * Enable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON); /* * Enable RX. @@ -1455,11 +1453,6 @@ static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC2, 1); rt2x00_set_field32(®, TX_CNTL_CSR_ABORT_TX_AC3, 1); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); - - /* - * Disable interrupts. - */ - rt61pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF); } static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) @@ -1467,7 +1460,6 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) u32 reg; unsigned int i; char put_to_sleep; - char current_state; put_to_sleep = (state != STATE_AWAKE); @@ -1483,16 +1475,12 @@ static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00pci_register_read(rt2x00dev, MAC_CSR12, ®); - current_state = - rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); - if (current_state == !put_to_sleep) + state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); + if (state == !put_to_sleep) return 0; msleep(10); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state %d.\n", !put_to_sleep, current_state); - return -EBUSY; } @@ -1510,11 +1498,13 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt61pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt61pci_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + rt61pci_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1527,6 +1517,10 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1535,8 +1529,7 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1552,6 +1545,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max); rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER); rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1); + rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1); rt2x00_desc_write(txd, 1, word); rt2x00_desc_read(txd, 2, &word); @@ -1562,14 +1556,22 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 5, &word); + rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid); + rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, + skbdesc->entry->entry_idx); rt2x00_set_field32(&word, TXD_W5_TX_POWER, TXPOWER_TO_DEV(rt2x00dev->tx_power)); rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); rt2x00_desc_write(txd, 5, word); + rt2x00_desc_read(txd, 6, &word); + rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS, + skbdesc->skb_dma); + rt2x00_desc_write(txd, 6, word); + if (skbdesc->desc_len > TXINFO_SIZE) { rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len); rt2x00_desc_write(txd, 11, word); } @@ -1586,10 +1588,9 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); @@ -1599,12 +1600,47 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * TX data initialization */ +static void rt61pci_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2x00pci_register_multiwrite(rt2x00dev, + beacon_base, + skbdesc->desc, skbdesc->desc_len); + rt2x00pci_register_multiwrite(rt2x00dev, + beacon_base + skbdesc->desc_len, + entry->skb->data, entry->skb->len); + + /* + * Clean up beacon skb. + */ + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; +} + static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue == RT2X00_BCN_QUEUE_BEACON) { + if (queue == QID_BEACON) { /* * For Wi-Fi faily generated beacons between participating * stations. Set TBTT phase adaptive adjustment step to 8us. @@ -1622,14 +1658,10 @@ static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev, } rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, ®); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, - (queue == IEEE80211_TX_QUEUE_DATA0)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, - (queue == IEEE80211_TX_QUEUE_DATA1)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, - (queue == IEEE80211_TX_QUEUE_DATA2)); - rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, - (queue == IEEE80211_TX_QUEUE_DATA3)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI)); + rt2x00_set_field32(®, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO)); rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg); } @@ -1680,14 +1712,13 @@ static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1) static void rt61pci_fill_rxdone(struct queue_entry *entry, struct rxdone_entry_desc *rxdesc) { - struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data; + struct queue_entry_priv_pci *entry_priv = entry->priv_data; u32 word0; u32 word1; - rt2x00_desc_read(priv_rx->desc, 0, &word0); - rt2x00_desc_read(priv_rx->desc, 1, &word1); + rt2x00_desc_read(entry_priv->desc, 0, &word0); + rt2x00_desc_read(entry_priv->desc, 1, &word1); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; @@ -1701,7 +1732,6 @@ static void rt61pci_fill_rxdone(struct queue_entry *entry, rxdesc->rssi = rt61pci_agc_to_rssi(entry->queue->rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = 0; if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) @@ -1716,7 +1746,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) struct data_queue *queue; struct queue_entry *entry; struct queue_entry *entry_done; - struct queue_entry_priv_pci_tx *priv_tx; + struct queue_entry_priv_pci *entry_priv; struct txdone_entry_desc txdesc; u32 word; u32 reg; @@ -1761,8 +1791,8 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) continue; entry = &queue->entries[index]; - priv_tx = entry->priv_data; - rt2x00_desc_read(priv_tx->desc, 0, &word); + entry_priv = entry->priv_data; + rt2x00_desc_read(entry_priv->desc, 0, &word); if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) || !rt2x00_get_field32(word, TXD_W0_VALID)) @@ -1777,20 +1807,31 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev) "TX status report missed for entry %d\n", entry_done->entry_idx); - txdesc.status = TX_FAIL_OTHER; + txdesc.flags = 0; + __set_bit(TXDONE_UNKNOWN, &txdesc.flags); txdesc.retry = 0; - rt2x00pci_txdone(rt2x00dev, entry_done, &txdesc); + rt2x00lib_txdone(entry_done, &txdesc); entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE); } /* * Obtain the status about this packet. */ - txdesc.status = rt2x00_get_field32(reg, STA_CSR4_TX_RESULT); + txdesc.flags = 0; + switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) { + case 0: /* Success, maybe with retry */ + __set_bit(TXDONE_SUCCESS, &txdesc.flags); + break; + case 6: /* Failure, excessive retries */ + __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags); + /* Don't break, this is a failed frame! */ + default: /* Failure */ + __set_bit(TXDONE_FAILURE, &txdesc.flags); + } txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT); - rt2x00pci_txdone(rt2x00dev, entry, &txdesc); + rt2x00lib_txdone(entry, &txdesc); } } @@ -1976,7 +2017,7 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) * To determine the RT chip we have to read the * PCI header of the device. */ - pci_read_config_word(rt2x00dev_pci(rt2x00dev), + pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_CONFIG_HEADER_DEVICE, &device); value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE); rt2x00pci_register_read(rt2x00dev, MAC_CSR0, ®); @@ -2078,31 +2119,11 @@ static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev) rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; - rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; - rt2x00dev->led_assoc.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_assoc.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_assoc.flags = LED_INITIALIZED; - - if (value == LED_MODE_SIGNAL_STRENGTH) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_QUALITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt61pci_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt61pci_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + if (value == LED_MODE_SIGNAL_STRENGTH) + rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_QUALITY); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, @@ -2258,13 +2279,11 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = 0; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 4; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -2327,9 +2346,10 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) rt61pci_probe_hw_mode(rt2x00dev); /* - * This device requires firmware. + * This device requires firmware and DMA mapped skbs. */ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags); /* * Set the rssi offset. @@ -2370,67 +2390,6 @@ static u64 rt61pci_get_tsf(struct ieee80211_hw *hw) return tsf; } -static int rt61pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct queue_entry_priv_pci_tx *priv_tx; - struct skb_frame_desc *skbdesc; - unsigned int beacon_base; - u32 reg; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - priv_tx = intf->beacon->priv_data; - memset(priv_tx->desc, 0, intf->beacon->queue->desc_size); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data; - skbdesc->data_len = skb->len; - skbdesc->desc = priv_tx->desc; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - rt2x00pci_register_multiwrite(rt2x00dev, beacon_base, - skbdesc->desc, skbdesc->desc_len); - rt2x00pci_register_multiwrite(rt2x00dev, - beacon_base + skbdesc->desc_len, - skbdesc->data, skbdesc->data_len); - rt61pci_kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} - static const struct ieee80211_ops rt61pci_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -2446,7 +2405,6 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = { .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt61pci_get_tsf, - .beacon_update = rt61pci_beacon_update, }; static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { @@ -2466,6 +2424,7 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = { .link_tuner = rt61pci_link_tuner, .write_tx_desc = rt61pci_write_tx_desc, .write_tx_data = rt2x00pci_write_tx_data, + .write_beacon = rt61pci_write_beacon, .kick_tx_queue = rt61pci_kick_tx_queue, .fill_rxdone = rt61pci_fill_rxdone, .config_filter = rt61pci_config_filter, @@ -2478,21 +2437,21 @@ static const struct data_queue_desc rt61pci_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_rx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt61pci_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct data_queue_desc rt61pci_queue_bcn = { .entry_num = 4 * BEACON_ENTRIES, .data_size = 0, /* No DMA required for beacons */ .desc_size = TXINFO_SIZE, - .priv_size = sizeof(struct queue_entry_priv_pci_tx), + .priv_size = sizeof(struct queue_entry_priv_pci), }; static const struct rt2x00_ops rt61pci_ops = { @@ -2501,6 +2460,7 @@ static const struct rt2x00_ops rt61pci_ops = { .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt61pci_queue_rx, .tx = &rt61pci_queue_tx, .bcn = &rt61pci_queue_bcn, diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index 3511bba7ff65..1004d5b899e6 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -39,8 +39,6 @@ * Signal information. * Defaul offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 120 /* @@ -54,6 +52,11 @@ #define RF_SIZE 0x0014 /* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 4 + +/* * PCI registers. */ diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 6a62d6bb96fe..d383735ab8f2 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -74,10 +74,10 @@ static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u32 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, USB_VENDOR_REQUEST_IN, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT32(length)); } static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev, @@ -102,10 +102,10 @@ static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, const unsigned int offset, void *value, const u32 length) { - int timeout = REGISTER_TIMEOUT * (length / sizeof(u32)); rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, offset, - value, length, timeout); + value, length, + REGISTER_TIMEOUT32(length)); } static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev) @@ -341,6 +341,17 @@ static int rt73usb_blink_set(struct led_classdev *led_cdev, return 0; } + +static void rt73usb_init_led(struct rt2x00_dev *rt2x00dev, + struct rt2x00_led *led, + enum led_type type) +{ + led->rt2x00dev = rt2x00dev; + led->type = type; + led->led_dev.brightness_set = rt73usb_brightness_set; + led->led_dev.blink_set = rt73usb_blink_set; + led->flags = LED_INITIALIZED; +} #endif /* CONFIG_RT73USB_LEDS */ /* @@ -882,7 +893,6 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, const char *ptr = data; char *cache; int buflen; - int timeout; /* * Wait for stable hardware. @@ -913,14 +923,14 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data, for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) { buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE); - timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32)); memcpy(cache, ptr, buflen); rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, USB_VENDOR_REQUEST_OUT, FIRMWARE_IMAGE_BASE + i, 0, - cache, buflen, timeout); + cache, buflen, + REGISTER_TIMEOUT32(buflen)); ptr += buflen; } @@ -1100,25 +1110,32 @@ static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt73usb_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; - u16 eeprom; - u8 reg_id; u8 value; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt73usb_bbp_read(rt2x00dev, 0, &value); if ((value != 0xff) && (value != 0x00)) - goto continue_csr_init; - NOTICE(rt2x00dev, "Waiting for BBP register.\n"); + return 0; udelay(REGISTER_BUSY_DELAY); } ERROR(rt2x00dev, "BBP register access failed, aborting.\n"); return -EACCES; +} + +static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i; + u16 eeprom; + u8 reg_id; + u8 value; + + if (unlikely(rt73usb_wait_bbp_ready(rt2x00dev))) + return -EACCES; -continue_csr_init: rt73usb_bbp_write(rt2x00dev, 3, 0x80); rt73usb_bbp_write(rt2x00dev, 15, 0x30); rt73usb_bbp_write(rt2x00dev, 21, 0xc8); @@ -1168,7 +1185,8 @@ static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev, rt73usb_register_read(rt2x00dev, TXRX_CSR0, ®); rt2x00_set_field32(®, TXRX_CSR0_DISABLE_RX, - state == STATE_RADIO_RX_OFF); + (state == STATE_RADIO_RX_OFF) || + (state == STATE_RADIO_RX_OFF_LINK)); rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg); } @@ -1177,11 +1195,9 @@ static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev) /* * Initialize all registers. */ - if (rt73usb_init_registers(rt2x00dev) || - rt73usb_init_bbp(rt2x00dev)) { - ERROR(rt2x00dev, "Register initialization failed.\n"); + if (unlikely(rt73usb_init_registers(rt2x00dev) || + rt73usb_init_bbp(rt2x00dev))) return -EIO; - } return 0; } @@ -1203,7 +1219,6 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) u32 reg; unsigned int i; char put_to_sleep; - char current_state; put_to_sleep = (state != STATE_AWAKE); @@ -1219,16 +1234,12 @@ static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) */ for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt73usb_register_read(rt2x00dev, MAC_CSR12, ®); - current_state = - rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); - if (current_state == !put_to_sleep) + state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE); + if (state == !put_to_sleep) return 0; msleep(10); } - NOTICE(rt2x00dev, "Device failed to enter state %d, " - "current device state %d.\n", !put_to_sleep, current_state); - return -EBUSY; } @@ -1246,11 +1257,13 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, break; case STATE_RADIO_RX_ON: case STATE_RADIO_RX_ON_LINK: - rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON); - break; case STATE_RADIO_RX_OFF: case STATE_RADIO_RX_OFF_LINK: - rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF); + rt73usb_toggle_rx(rt2x00dev, state); + break; + case STATE_RADIO_IRQ_ON: + case STATE_RADIO_IRQ_OFF: + /* No support, but no error either */ break; case STATE_DEEP_SLEEP: case STATE_SLEEP: @@ -1263,6 +1276,10 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, break; } + if (unlikely(retval)) + ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n", + state, retval); + return retval; } @@ -1271,8 +1288,7 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev, */ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc, - struct ieee80211_tx_control *control) + struct txentry_desc *txdesc) { struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); __le32 *txd = skbdesc->desc; @@ -1317,16 +1333,59 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, - !!(control->flags & - IEEE80211_TXCTL_LONG_RETRY_LIMIT)); + test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, + skb->len - skbdesc->desc_len); rt2x00_set_field32(&word, TXD_W0_BURST2, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } +/* + * TX data initialization + */ +static void rt73usb_write_beacon(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + unsigned int beacon_base; + u32 reg; + + /* + * Add the descriptor in front of the skb. + */ + skb_push(entry->skb, entry->queue->desc_size); + memcpy(entry->skb->data, skbdesc->desc, skbdesc->desc_len); + skbdesc->desc = entry->skb->data; + + /* + * Disable beaconing while we are reloading the beacon data, + * otherwise we might be sending out invalid data. + */ + rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); + rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); + rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); + rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); + rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); + + /* + * Write entire beacon with descriptor to register. + */ + beacon_base = HW_BEACON_OFFSET(entry->entry_idx); + rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, + USB_VENDOR_REQUEST_OUT, beacon_base, 0, + entry->skb->data, entry->skb->len, + REGISTER_TIMEOUT32(entry->skb->len)); + + /* + * Clean up the beacon skb. + */ + dev_kfree_skb(entry->skb); + entry->skb = NULL; +} + static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb) { @@ -1342,16 +1401,15 @@ static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev, return length; } -/* - * TX data initialization - */ static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev, - const unsigned int queue) + const enum data_queue_qid queue) { u32 reg; - if (queue != RT2X00_BCN_QUEUE_BEACON) + if (queue != QID_BEACON) { + rt2x00usb_kick_tx_queue(rt2x00dev, queue); return; + } /* * For Wi-Fi faily generated beacons between participating stations. @@ -1421,25 +1479,22 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, { struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); __le32 *rxd = (__le32 *)entry->skb->data; - unsigned int offset = entry->queue->desc_size + 2; u32 word0; u32 word1; /* - * Copy descriptor to the available headroom inside the skbuffer. + * Copy descriptor to the skbdesc->desc buffer, making it safe from moving of + * frame data in rt2x00usb. */ - skb_push(entry->skb, offset); - memcpy(entry->skb->data, rxd, entry->queue->desc_size); - rxd = (__le32 *)entry->skb->data; + memcpy(skbdesc->desc, rxd, skbdesc->desc_len); + rxd = (__le32 *)skbdesc->desc; /* - * The descriptor is now aligned to 4 bytes and thus it is - * now safe to read it on all architectures. + * It is now safe to read the descriptor on all architectures. */ rt2x00_desc_read(rxd, 0, &word0); rt2x00_desc_read(rxd, 1, &word1); - rxdesc->flags = 0; if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR)) rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC; @@ -1453,25 +1508,16 @@ static void rt73usb_fill_rxdone(struct queue_entry *entry, rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1); rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT); - rxdesc->dev_flags = 0; if (rt2x00_get_field32(word0, RXD_W0_OFDM)) rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP; if (rt2x00_get_field32(word0, RXD_W0_MY_BSS)) rxdesc->dev_flags |= RXDONE_MY_BSS; /* - * Adjust the skb memory window to the frame boundaries. + * Set skb pointers, and update frame information. */ - skb_pull(entry->skb, offset + entry->queue->desc_size); + skb_pull(entry->skb, entry->queue->desc_size); skb_trim(entry->skb, rxdesc->size); - - /* - * Set descriptor and data pointer. - */ - skbdesc->data = entry->skb->data; - skbdesc->data_len = rxdesc->size; - skbdesc->desc = rxd; - skbdesc->desc_len = entry->queue->desc_size; } /* @@ -1644,31 +1690,11 @@ static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev) #ifdef CONFIG_RT73USB_LEDS rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom); - rt2x00dev->led_radio.rt2x00dev = rt2x00dev; - rt2x00dev->led_radio.type = LED_TYPE_RADIO; - rt2x00dev->led_radio.led_dev.brightness_set = - rt73usb_brightness_set; - rt2x00dev->led_radio.led_dev.blink_set = - rt73usb_blink_set; - rt2x00dev->led_radio.flags = LED_INITIALIZED; - - rt2x00dev->led_assoc.rt2x00dev = rt2x00dev; - rt2x00dev->led_assoc.type = LED_TYPE_ASSOC; - rt2x00dev->led_assoc.led_dev.brightness_set = - rt73usb_brightness_set; - rt2x00dev->led_assoc.led_dev.blink_set = - rt73usb_blink_set; - rt2x00dev->led_assoc.flags = LED_INITIALIZED; - - if (value == LED_MODE_SIGNAL_STRENGTH) { - rt2x00dev->led_qual.rt2x00dev = rt2x00dev; - rt2x00dev->led_qual.type = LED_TYPE_QUALITY; - rt2x00dev->led_qual.led_dev.brightness_set = - rt73usb_brightness_set; - rt2x00dev->led_qual.led_dev.blink_set = - rt73usb_blink_set; - rt2x00dev->led_qual.flags = LED_INITIALIZED; - } + rt73usb_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO); + rt73usb_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); + if (value == LED_MODE_SIGNAL_STRENGTH) + rt73usb_init_led(rt2x00dev, &rt2x00dev->led_qual, + LED_TYPE_QUALITY); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value); rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0, @@ -1846,13 +1872,11 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE | - IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | + IEEE80211_HW_SIGNAL_DBM; rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE; - rt2x00dev->hw->max_signal = MAX_SIGNAL; - rt2x00dev->hw->max_rssi = MAX_RX_SSI; - rt2x00dev->hw->queues = 4; - SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev); + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0)); @@ -1974,69 +1998,6 @@ static u64 rt73usb_get_tsf(struct ieee80211_hw *hw) #define rt73usb_get_tsf NULL #endif -static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control) -{ - struct rt2x00_dev *rt2x00dev = hw->priv; - struct rt2x00_intf *intf = vif_to_intf(control->vif); - struct skb_frame_desc *skbdesc; - unsigned int beacon_base; - unsigned int timeout; - u32 reg; - - if (unlikely(!intf->beacon)) - return -ENOBUFS; - - /* - * Add the descriptor in front of the skb. - */ - skb_push(skb, intf->beacon->queue->desc_size); - memset(skb->data, 0, intf->beacon->queue->desc_size); - - /* - * Fill in skb descriptor - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); - skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED; - skbdesc->data = skb->data + intf->beacon->queue->desc_size; - skbdesc->data_len = skb->len - intf->beacon->queue->desc_size; - skbdesc->desc = skb->data; - skbdesc->desc_len = intf->beacon->queue->desc_size; - skbdesc->entry = intf->beacon; - - /* - * Disable beaconing while we are reloading the beacon data, - * otherwise we might be sending out invalid data. - */ - rt73usb_register_read(rt2x00dev, TXRX_CSR9, ®); - rt2x00_set_field32(®, TXRX_CSR9_TSF_TICKING, 0); - rt2x00_set_field32(®, TXRX_CSR9_TBTT_ENABLE, 0); - rt2x00_set_field32(®, TXRX_CSR9_BEACON_GEN, 0); - rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg); - - /* - * mac80211 doesn't provide the control->queue variable - * for beacons. Set our own queue identification so - * it can be used during descriptor initialization. - */ - control->queue = RT2X00_BCN_QUEUE_BEACON; - rt2x00lib_write_tx_desc(rt2x00dev, skb, control); - - /* - * Write entire beacon with descriptor to register, - * and kick the beacon generator. - */ - beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx); - timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32)); - rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, 0, - skb->data, skb->len, timeout); - rt73usb_kick_tx_queue(rt2x00dev, control->queue); - - return 0; -} - static const struct ieee80211_ops rt73usb_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, @@ -2052,7 +2013,6 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = { .conf_tx = rt2x00mac_conf_tx, .get_tx_stats = rt2x00mac_get_tx_stats, .get_tsf = rt73usb_get_tsf, - .beacon_update = rt73usb_beacon_update, }; static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { @@ -2070,6 +2030,7 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = { .link_tuner = rt73usb_link_tuner, .write_tx_desc = rt73usb_write_tx_desc, .write_tx_data = rt2x00usb_write_tx_data, + .write_beacon = rt73usb_write_beacon, .get_tx_data_len = rt73usb_get_tx_data_len, .kick_tx_queue = rt73usb_kick_tx_queue, .fill_rxdone = rt73usb_fill_rxdone, @@ -2083,21 +2044,21 @@ static const struct data_queue_desc rt73usb_queue_rx = { .entry_num = RX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = RXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_rx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct data_queue_desc rt73usb_queue_tx = { .entry_num = TX_ENTRIES, .data_size = DATA_FRAME_SIZE, .desc_size = TXD_DESC_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_tx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct data_queue_desc rt73usb_queue_bcn = { .entry_num = 4 * BEACON_ENTRIES, .data_size = MGMT_FRAME_SIZE, .desc_size = TXINFO_SIZE, - .priv_size = sizeof(struct queue_entry_priv_usb_tx), + .priv_size = sizeof(struct queue_entry_priv_usb), }; static const struct rt2x00_ops rt73usb_ops = { @@ -2106,6 +2067,7 @@ static const struct rt2x00_ops rt73usb_ops = { .max_ap_intf = 4, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, + .tx_queues = NUM_TX_QUEUES, .rx = &rt73usb_queue_rx, .tx = &rt73usb_queue_tx, .bcn = &rt73usb_queue_bcn, diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 06d687425fef..148493501011 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -39,8 +39,6 @@ * Signal information. * Defaul offset is required for RSSI <-> dBm conversion. */ -#define MAX_SIGNAL 100 -#define MAX_RX_SSI -1 #define DEFAULT_RSSI_OFFSET 120 /* @@ -54,6 +52,11 @@ #define RF_SIZE 0x0014 /* + * Number of TX queues. + */ +#define NUM_TX_QUEUES 4 + +/* * USB registers. */ |
