diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800lib.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800lib.c | 305 |
1 files changed, 228 insertions, 77 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 6a0cb2d924d8..27a6e225083c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -255,6 +255,23 @@ void rt2800_mcu_request(struct rt2x00_dev *rt2x00dev, } EXPORT_SYMBOL_GPL(rt2800_mcu_request); +int rt2800_wait_csr_ready(struct rt2x00_dev *rt2x00dev) +{ + unsigned int i = 0; + u32 reg; + + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { + rt2800_register_read(rt2x00dev, MAC_CSR0, ®); + if (reg && reg != ~0) + return 0; + msleep(1); + } + + ERROR(rt2x00dev, "Unstable hardware.\n"); + return -EBUSY; +} +EXPORT_SYMBOL_GPL(rt2800_wait_csr_ready); + int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev) { unsigned int i; @@ -368,19 +385,16 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev, u32 reg; /* - * Wait for stable hardware. + * If driver doesn't wake up firmware here, + * rt2800_load_firmware will hang forever when interface is up again. */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } + rt2800_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000); - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); + /* + * Wait for stable hardware. + */ + if (rt2800_wait_csr_ready(rt2x00dev)) return -EBUSY; - } if (rt2x00_is_pci(rt2x00dev)) rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002); @@ -469,7 +483,7 @@ void rt2800_write_tx_data(struct queue_entry *entry, txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, txdesc->length); - rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->queue + 1); + rt2x00_set_field32(&word, TXWI_W1_PACKETID, txdesc->qid + 1); rt2x00_desc_write(txwi, 1, word); /* @@ -573,6 +587,49 @@ void rt2800_process_rxwi(struct queue_entry *entry, } EXPORT_SYMBOL_GPL(rt2800_process_rxwi); +static bool rt2800_txdone_entry_check(struct queue_entry *entry, u32 reg) +{ + __le32 *txwi; + u32 word; + int wcid, ack, pid; + int tx_wcid, tx_ack, tx_pid; + + wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); + ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); + + /* + * This frames has returned with an IO error, + * so the status report is not intended for this + * frame. + */ + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) { + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + return false; + } + + /* + * Validate if this TX status report is intended for + * this entry by comparing the WCID/ACK/PID fields. + */ + txwi = rt2800_drv_get_txwi(entry); + + rt2x00_desc_read(txwi, 1, &word); + tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); + tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); + tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); + + if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) { + WARNING(entry->queue->rt2x00dev, + "TX status report missed for queue %d entry %d\n", + entry->queue->qid, entry->entry_idx); + rt2x00lib_txdone_noinfo(entry, TXDONE_UNKNOWN); + return false; + } + + return true; +} + void rt2800_txdone(struct rt2x00_dev *rt2x00dev) { struct data_queue *queue; @@ -581,8 +638,8 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev) struct txdone_entry_desc txdesc; u32 word; u32 reg; - int wcid, ack, pid, tx_wcid, tx_ack, tx_pid; u16 mcs, real_mcs; + u8 pid; int i; /* @@ -599,18 +656,15 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev) if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID)) break; - wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); - ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); - pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE); - /* * Skip this entry when it contains an invalid * queue identication number. */ - if (pid <= 0 || pid > QID_RX) + pid = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1; + if (pid >= QID_RX) continue; - queue = rt2x00queue_get_queue(rt2x00dev, pid - 1); + queue = rt2x00queue_get_queue(rt2x00dev, pid); if (unlikely(!queue)) continue; @@ -619,38 +673,24 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev) * order. We first check that the queue is not empty. */ entry = NULL; + txwi = NULL; while (!rt2x00queue_empty(queue)) { entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); - if (!test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + if (rt2800_txdone_entry_check(entry, reg)) break; - - rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); } if (!entry || rt2x00queue_empty(queue)) break; - /* - * Check if we got a match by looking at WCID/ACK/PID - * fields - */ - txwi = rt2800_drv_get_txwi(entry); - - rt2x00_desc_read(txwi, 1, &word); - tx_wcid = rt2x00_get_field32(word, TXWI_W1_WIRELESS_CLI_ID); - tx_ack = rt2x00_get_field32(word, TXWI_W1_ACK); - tx_pid = rt2x00_get_field32(word, TXWI_W1_PACKETID); - - if ((wcid != tx_wcid) || (ack != tx_ack) || (pid != tx_pid)) - WARNING(rt2x00dev, "invalid TX_STA_FIFO content"); /* * Obtain the status about this packet. */ txdesc.flags = 0; + txwi = rt2800_drv_get_txwi(entry); rt2x00_desc_read(txwi, 0, &word); mcs = rt2x00_get_field32(word, TXWI_W0_MCS); - mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS); /* @@ -1095,19 +1135,23 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf, } if (flags & CONFIG_UPDATE_MAC) { - reg = le32_to_cpu(conf->mac[1]); - rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); - conf->mac[1] = cpu_to_le32(reg); + if (!is_zero_ether_addr((const u8 *)conf->mac)) { + reg = le32_to_cpu(conf->mac[1]); + rt2x00_set_field32(®, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff); + conf->mac[1] = cpu_to_le32(reg); + } rt2800_register_multiwrite(rt2x00dev, MAC_ADDR_DW0, conf->mac, sizeof(conf->mac)); } if (flags & CONFIG_UPDATE_BSSID) { - reg = le32_to_cpu(conf->bssid[1]); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); - rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 7); - conf->bssid[1] = cpu_to_le32(reg); + if (!is_zero_ether_addr((const u8 *)conf->bssid)) { + reg = le32_to_cpu(conf->bssid[1]); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_ID_MASK, 3); + rt2x00_set_field32(®, MAC_BSSID_DW1_BSS_BCN_NUM, 7); + conf->bssid[1] = cpu_to_le32(reg); + } rt2800_register_multiwrite(rt2x00dev, MAC_BSSID_DW0, conf->bssid, sizeof(conf->bssid)); @@ -1240,27 +1284,23 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev, * double meaning, and we should set a 7DBm boost flag. */ rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST, - (info->tx_power1 >= 0)); + (info->default_power1 >= 0)); - if (info->tx_power1 < 0) - info->tx_power1 += 7; + if (info->default_power1 < 0) + info->default_power1 += 7; - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power1)); + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A, info->default_power1); rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST, - (info->tx_power2 >= 0)); + (info->default_power2 >= 0)); - if (info->tx_power2 < 0) - info->tx_power2 += 7; + if (info->default_power2 < 0) + info->default_power2 += 7; - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, - TXPOWER_A_TO_DEV(info->tx_power2)); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A, info->default_power2); } else { - rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power1)); - rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, - TXPOWER_G_TO_DEV(info->tx_power2)); + rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G, info->default_power1); + rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G, info->default_power2); } rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf)); @@ -1300,13 +1340,11 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); rt2800_rfcsr_read(rt2x00dev, 12, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power1)); + rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER, info->default_power1); rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, - TXPOWER_G_TO_DEV(info->tx_power2)); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, info->default_power2); rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); @@ -1330,10 +1368,19 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, unsigned int tx_pin; u8 bbp; + if (rf->channel <= 14) { + info->default_power1 = TXPOWER_G_TO_DEV(info->default_power1); + info->default_power2 = TXPOWER_G_TO_DEV(info->default_power2); + } else { + info->default_power1 = TXPOWER_A_TO_DEV(info->default_power1); + info->default_power2 = TXPOWER_A_TO_DEV(info->default_power2); + } + if (rt2x00_rf(rt2x00dev, RF2020) || rt2x00_rf(rt2x00dev, RF3020) || rt2x00_rf(rt2x00dev, RF3021) || - rt2x00_rf(rt2x00dev, RF3022)) + rt2x00_rf(rt2x00dev, RF3022) || + rt2x00_rf(rt2x00dev, RF3052)) rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info); else rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); @@ -1656,7 +1703,7 @@ EXPORT_SYMBOL_GPL(rt2800_link_tuner); /* * Initialization functions. */ -int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 eeprom; @@ -2026,7 +2073,6 @@ int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_registers); static int rt2800_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev) { @@ -2069,7 +2115,7 @@ static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev) return -EACCES; } -int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) { unsigned int i; u16 eeprom; @@ -2164,7 +2210,6 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_bbp); static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, bool bw40, u8 rfcsr24, u8 filter_target) @@ -2226,7 +2271,7 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, return rfcsr24; } -int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { u8 rfcsr; u8 bbp; @@ -2480,7 +2525,100 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_rfcsr); + +int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + u16 word; + + /* + * Initialize all registers. + */ + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || + rt2800_init_registers(rt2x00dev) || + rt2800_init_bbp(rt2x00dev) || + rt2800_init_rfcsr(rt2x00dev))) + return -EIO; + + /* + * Send signal to firmware during boot time. + */ + rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); + + if (rt2x00_is_usb(rt2x00dev) && + (rt2x00_rt(rt2x00dev, RT3070) || + rt2x00_rt(rt2x00dev, RT3071) || + rt2x00_rt(rt2x00dev, RT3572))) { + udelay(200); + rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); + udelay(10); + } + + /* + * Enable RX. + */ + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + udelay(50); + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); + rt2x00_set_field32(®, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + /* + * Initialize LED control + */ + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, + word & 0xff, (word >> 8) & 0xff); + + rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); + rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, + word & 0xff, (word >> 8) & 0xff); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_enable_radio); + +void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + u32 reg; + + rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_RX_DMA_BUSY, 0); + rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); + rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); + + /* Wait for DMA, ignore error */ + rt2800_wait_wpdma_ready(rt2x00dev); + + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 0); + rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 0); + rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); + + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); + rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); +} +EXPORT_SYMBOL_GPL(rt2800_disable_radio); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev) { @@ -2636,6 +2774,13 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) default_lna_gain); rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); + rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &word); + if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_24GHZ) == 0xff) + rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_24GHZ, MAX_G_TXPOWER); + if (rt2x00_get_field16(word, EEPROM_MAX_TX_POWER_5GHZ) == 0xff) + rt2x00_set_field16(&word, EEPROM_MAX_TX_POWER_5GHZ, MAX_A_TXPOWER); + rt2x00_eeprom_write(rt2x00dev, EEPROM_MAX_TX_POWER, word); + return 0; } EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); @@ -2875,9 +3020,10 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; - char *tx_power1; - char *tx_power2; + char *default_power1; + char *default_power2; unsigned int i; + unsigned short max_power; u16 eeprom; /* @@ -2991,21 +3137,26 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) spec->channels_info = info; - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); + rt2x00_eeprom_read(rt2x00dev, EEPROM_MAX_TX_POWER, &eeprom); + max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_24GHZ); + default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1); + default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2); for (i = 0; i < 14; i++) { - info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]); + info[i].max_power = max_power; + info[i].default_power1 = TXPOWER_G_FROM_DEV(default_power1[i]); + info[i].default_power2 = TXPOWER_G_FROM_DEV(default_power2[i]); } if (spec->num_channels > 14) { - tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); - tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); + max_power = rt2x00_get_field16(eeprom, EEPROM_MAX_TX_POWER_5GHZ); + default_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1); + default_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2); for (i = 14; i < spec->num_channels; i++) { - info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]); - info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]); + info[i].max_power = max_power; + info[i].default_power1 = TXPOWER_A_FROM_DEV(default_power1[i]); + info[i].default_power2 = TXPOWER_A_FROM_DEV(default_power2[i]); } } |
