summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/libertas/if_sdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/libertas/if_sdio.c')
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c21
1 files changed, 16 insertions, 5 deletions
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index a7b5cb0c2753..224e9853c480 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -907,7 +907,7 @@ static void if_sdio_interrupt(struct sdio_func *func)
card = sdio_get_drvdata(func);
cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret);
- if (ret)
+ if (ret || !cause)
goto out;
lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause);
@@ -1008,10 +1008,6 @@ static int if_sdio_probe(struct sdio_func *func,
if (ret)
goto release;
- ret = sdio_claim_irq(func, if_sdio_interrupt);
- if (ret)
- goto disable;
-
/* For 1-bit transfers to the 8686 model, we need to enable the
* interrupt flag in the CCCR register. Set the MMC_QUIRK_LENIENT_FN0
* bit to allow access to non-vendor registers. */
@@ -1083,6 +1079,21 @@ static int if_sdio_probe(struct sdio_func *func,
card->rx_unit = 0;
/*
+ * Set up the interrupt handler late.
+ *
+ * If we set it up earlier, the (buggy) hardware generates a spurious
+ * interrupt, even before the interrupt has been enabled, with
+ * CCCR_INTx = 0.
+ *
+ * We register the interrupt handler late so that we can handle any
+ * spurious interrupts, and also to avoid generation of that known
+ * spurious interrupt in the first place.
+ */
+ ret = sdio_claim_irq(func, if_sdio_interrupt);
+ if (ret)
+ goto disable;
+
+ /*
* Enable interrupts now that everything is set up
*/
sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret);
OpenPOWER on IntegriCloud