diff options
Diffstat (limited to 'drivers/net/ethernet/qualcomm/emac/emac-sgmii.c')
| -rw-r--r-- | drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 784 |
1 files changed, 784 insertions, 0 deletions
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c new file mode 100644 index 000000000000..75c1b530e39e --- /dev/null +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -0,0 +1,784 @@ +/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* Qualcomm Technologies, Inc. EMAC SGMII Controller driver. + */ + +#include <linux/iopoll.h> +#include <linux/acpi.h> +#include <linux/of_device.h> +#include "emac.h" +#include "emac-mac.h" +#include "emac-sgmii.h" + +/* EMAC_QSERDES register offsets */ +#define EMAC_QSERDES_COM_SYS_CLK_CTRL 0x000000 +#define EMAC_QSERDES_COM_PLL_CNTRL 0x000014 +#define EMAC_QSERDES_COM_PLL_IP_SETI 0x000018 +#define EMAC_QSERDES_COM_PLL_CP_SETI 0x000024 +#define EMAC_QSERDES_COM_PLL_IP_SETP 0x000028 +#define EMAC_QSERDES_COM_PLL_CP_SETP 0x00002c +#define EMAC_QSERDES_COM_SYSCLK_EN_SEL 0x000038 +#define EMAC_QSERDES_COM_RESETSM_CNTRL 0x000040 +#define EMAC_QSERDES_COM_PLLLOCK_CMP1 0x000044 +#define EMAC_QSERDES_COM_PLLLOCK_CMP2 0x000048 +#define EMAC_QSERDES_COM_PLLLOCK_CMP3 0x00004c +#define EMAC_QSERDES_COM_PLLLOCK_CMP_EN 0x000050 +#define EMAC_QSERDES_COM_DEC_START1 0x000064 +#define EMAC_QSERDES_COM_DIV_FRAC_START1 0x000098 +#define EMAC_QSERDES_COM_DIV_FRAC_START2 0x00009c +#define EMAC_QSERDES_COM_DIV_FRAC_START3 0x0000a0 +#define EMAC_QSERDES_COM_DEC_START2 0x0000a4 +#define EMAC_QSERDES_COM_PLL_CRCTRL 0x0000ac +#define EMAC_QSERDES_COM_RESET_SM 0x0000bc +#define EMAC_QSERDES_TX_BIST_MODE_LANENO 0x000100 +#define EMAC_QSERDES_TX_TX_EMP_POST1_LVL 0x000108 +#define EMAC_QSERDES_TX_TX_DRV_LVL 0x00010c +#define EMAC_QSERDES_TX_LANE_MODE 0x000150 +#define EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN 0x000170 +#define EMAC_QSERDES_RX_CDR_CONTROL 0x000200 +#define EMAC_QSERDES_RX_CDR_CONTROL2 0x000210 +#define EMAC_QSERDES_RX_RX_EQ_GAIN12 0x000230 + +/* EMAC_SGMII register offsets */ +#define EMAC_SGMII_PHY_SERDES_START 0x000000 +#define EMAC_SGMII_PHY_CMN_PWR_CTRL 0x000004 +#define EMAC_SGMII_PHY_RX_PWR_CTRL 0x000008 +#define EMAC_SGMII_PHY_TX_PWR_CTRL 0x00000C +#define EMAC_SGMII_PHY_LANE_CTRL1 0x000018 +#define EMAC_SGMII_PHY_AUTONEG_CFG2 0x000048 +#define EMAC_SGMII_PHY_CDR_CTRL0 0x000058 +#define EMAC_SGMII_PHY_SPEED_CFG1 0x000074 +#define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x000080 +#define EMAC_SGMII_PHY_RESET_CTRL 0x0000a8 +#define EMAC_SGMII_PHY_IRQ_CMD 0x0000ac +#define EMAC_SGMII_PHY_INTERRUPT_CLEAR 0x0000b0 +#define EMAC_SGMII_PHY_INTERRUPT_MASK 0x0000b4 +#define EMAC_SGMII_PHY_INTERRUPT_STATUS 0x0000b8 +#define EMAC_SGMII_PHY_RX_CHK_STATUS 0x0000d4 +#define EMAC_SGMII_PHY_AUTONEG0_STATUS 0x0000e0 +#define EMAC_SGMII_PHY_AUTONEG1_STATUS 0x0000e4 + +/* EMAC_QSERDES_COM_PLL_IP_SETI */ +#define PLL_IPSETI(x) ((x) & 0x3f) + +/* EMAC_QSERDES_COM_PLL_CP_SETI */ +#define PLL_CPSETI(x) ((x) & 0xff) + +/* EMAC_QSERDES_COM_PLL_IP_SETP */ +#define PLL_IPSETP(x) ((x) & 0x3f) + +/* EMAC_QSERDES_COM_PLL_CP_SETP */ +#define PLL_CPSETP(x) ((x) & 0x1f) + +/* EMAC_QSERDES_COM_PLL_CRCTRL */ +#define PLL_RCTRL(x) (((x) & 0xf) << 4) +#define PLL_CCTRL(x) ((x) & 0xf) + +/* SGMII v2 PHY registers per lane */ +#define EMAC_SGMII_PHY_LN_OFFSET 0x0400 + +/* SGMII v2 digital lane registers */ +#define EMAC_SGMII_LN_DRVR_CTRL0 0x00C +#define EMAC_SGMII_LN_DRVR_TAP_EN 0x018 +#define EMAC_SGMII_LN_TX_MARGINING 0x01C +#define EMAC_SGMII_LN_TX_PRE 0x020 +#define EMAC_SGMII_LN_TX_POST 0x024 +#define EMAC_SGMII_LN_TX_BAND_MODE 0x060 +#define EMAC_SGMII_LN_LANE_MODE 0x064 +#define EMAC_SGMII_LN_PARALLEL_RATE 0x078 +#define EMAC_SGMII_LN_CML_CTRL_MODE0 0x0B8 +#define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x0D0 +#define EMAC_SGMII_LN_VGA_INITVAL 0x134 +#define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x17C +#define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x188 +#define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x194 +#define EMAC_SGMII_LN_RX_BAND 0x19C +#define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x1B8 +#define EMAC_SGMII_LN_RSM_CONFIG 0x1F0 +#define EMAC_SGMII_LN_SIGDET_ENABLES 0x224 +#define EMAC_SGMII_LN_SIGDET_CNTRL 0x228 +#define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x22C +#define EMAC_SGMII_LN_RX_EN_SIGNAL 0x2A0 +#define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x2AC +#define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x2BC + +/* SGMII v2 digital lane register values */ +#define UCDR_STEP_BY_TWO_MODE0 BIT(7) +#define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f) +#define UCDR_ENABLE BIT(6) +#define UCDR_SO_SATURATION(x) ((x) & 0x3f) +#define SIGDET_LP_BYP_PS4 BIT(7) +#define SIGDET_EN_PS0_TO_PS2 BIT(6) +#define EN_ACCOUPLEVCM_SW_MUX BIT(5) +#define EN_ACCOUPLEVCM_SW BIT(4) +#define RX_SYNC_EN BIT(3) +#define RXTERM_HIGHZ_PS5 BIT(2) +#define SIGDET_EN_PS3 BIT(1) +#define EN_ACCOUPLE_VCM_PS3 BIT(0) +#define UFS_MODE BIT(5) +#define TXVAL_VALID_INIT BIT(4) +#define TXVAL_VALID_MUX BIT(3) +#define TXVAL_VALID BIT(2) +#define USB3P1_MODE BIT(1) +#define KR_PCIGEN3_MODE BIT(0) +#define PRE_EN BIT(3) +#define POST_EN BIT(2) +#define MAIN_EN_MUX BIT(1) +#define MAIN_EN BIT(0) +#define TX_MARGINING_MUX BIT(6) +#define TX_MARGINING(x) ((x) & 0x3f) +#define TX_PRE_MUX BIT(6) +#define TX_PRE(x) ((x) & 0x3f) +#define TX_POST_MUX BIT(6) +#define TX_POST(x) ((x) & 0x3f) +#define CML_GEAR_MODE(x) (((x) & 7) << 3) +#define CML2CMOS_IBOOST_MODE(x) ((x) & 7) +#define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2) +#define MIXER_DATARATE_MODE(x) ((x) & 3) +#define VGA_THRESH_DFE(x) ((x) & 0x3f) +#define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5) +#define SIGDET_LP_BYP_MUX BIT(4) +#define SIGDET_LP_BYP BIT(3) +#define SIGDET_EN_MUX BIT(2) +#define SIGDET_EN BIT(1) +#define SIGDET_FLT_BYP BIT(0) +#define SIGDET_LVL(x) (((x) & 0xf) << 4) +#define SIGDET_BW_CTRL(x) ((x) & 0xf) +#define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1) +#define SIGDET_DEGLITCH_BYP BIT(0) +#define INVERT_PCS_RX_CLK BIT(7) +#define PWM_EN BIT(6) +#define RXBIAS_SEL(x) (((x) & 0x3) << 4) +#define EBDAC_SIGN BIT(3) +#define EDAC_SIGN BIT(2) +#define EN_AUXTAP1SIGN_INVERT BIT(1) +#define EN_DAC_CHOPPING BIT(0) +#define DRVR_LOGIC_CLK_EN BIT(4) +#define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf) +#define PARALLEL_RATE_MODE2(x) (((x) & 0x3) << 4) +#define PARALLEL_RATE_MODE1(x) (((x) & 0x3) << 2) +#define PARALLEL_RATE_MODE0(x) ((x) & 0x3) +#define BAND_MODE2(x) (((x) & 0x3) << 4) +#define BAND_MODE1(x) (((x) & 0x3) << 2) +#define BAND_MODE0(x) ((x) & 0x3) +#define LANE_SYNC_MODE BIT(5) +#define LANE_MODE(x) ((x) & 0x1f) +#define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5) +#define EN_DLL_MODE0 BIT(4) +#define EN_IQ_DCC_MODE0 BIT(3) +#define EN_IQCAL_MODE0 BIT(2) +#define EN_QPATH_MODE0 BIT(1) +#define EN_EPATH_MODE0 BIT(0) +#define FORCE_TSYNC_ACK BIT(7) +#define FORCE_CMN_ACK BIT(6) +#define FORCE_CMN_READY BIT(5) +#define EN_RCLK_DEGLITCH BIT(4) +#define BYPASS_RSM_CDR_RESET BIT(3) +#define BYPASS_RSM_TSYNC BIT(2) +#define BYPASS_RSM_SAMP_CAL BIT(1) +#define BYPASS_RSM_DLL_CAL BIT(0) + +/* EMAC_QSERDES_COM_SYS_CLK_CTRL */ +#define SYSCLK_CM BIT(4) +#define SYSCLK_AC_COUPLE BIT(3) + +/* EMAC_QSERDES_COM_PLL_CNTRL */ +#define OCP_EN BIT(5) +#define PLL_DIV_FFEN BIT(2) +#define PLL_DIV_ORD BIT(1) + +/* EMAC_QSERDES_COM_SYSCLK_EN_SEL */ +#define SYSCLK_SEL_CMOS BIT(3) + +/* EMAC_QSERDES_COM_RESETSM_CNTRL */ +#define FRQ_TUNE_MODE BIT(4) + +/* EMAC_QSERDES_COM_PLLLOCK_CMP_EN */ +#define PLLLOCK_CMP_EN BIT(0) + +/* EMAC_QSERDES_COM_DEC_START1 */ +#define DEC_START1_MUX BIT(7) +#define DEC_START1(x) ((x) & 0x7f) + +/* EMAC_QSERDES_COM_DIV_FRAC_START1 * EMAC_QSERDES_COM_DIV_FRAC_START2 */ +#define DIV_FRAC_START_MUX BIT(7) +#define DIV_FRAC_START(x) ((x) & 0x7f) + +/* EMAC_QSERDES_COM_DIV_FRAC_START3 */ +#define DIV_FRAC_START3_MUX BIT(4) +#define DIV_FRAC_START3(x) ((x) & 0xf) + +/* EMAC_QSERDES_COM_DEC_START2 */ +#define DEC_START2_MUX BIT(1) +#define DEC_START2 BIT(0) + +/* EMAC_QSERDES_COM_RESET_SM */ +#define READY BIT(5) + +/* EMAC_QSERDES_TX_TX_EMP_POST1_LVL */ +#define TX_EMP_POST1_LVL_MUX BIT(5) +#define TX_EMP_POST1_LVL(x) ((x) & 0x1f) +#define TX_EMP_POST1_LVL_BMSK 0x1f +#define TX_EMP_POST1_LVL_SHFT 0 + +/* EMAC_QSERDES_TX_TX_DRV_LVL */ +#define TX_DRV_LVL_MUX BIT(4) +#define TX_DRV_LVL(x) ((x) & 0xf) + +/* EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN */ +#define EMP_EN_MUX BIT(1) +#define EMP_EN BIT(0) + +/* EMAC_QSERDES_RX_CDR_CONTROL & EMAC_QSERDES_RX_CDR_CONTROL2 */ +#define HBW_PD_EN BIT(7) +#define SECONDORDERENABLE BIT(6) +#define FIRSTORDER_THRESH(x) (((x) & 0x7) << 3) +#define SECONDORDERGAIN(x) ((x) & 0x7) + +/* EMAC_QSERDES_RX_RX_EQ_GAIN12 */ +#define RX_EQ_GAIN2(x) (((x) & 0xf) << 4) +#define RX_EQ_GAIN1(x) ((x) & 0xf) + +/* EMAC_SGMII_PHY_SERDES_START */ +#define SERDES_START BIT(0) + +/* EMAC_SGMII_PHY_CMN_PWR_CTRL */ +#define BIAS_EN BIT(6) +#define PLL_EN BIT(5) +#define SYSCLK_EN BIT(4) +#define CLKBUF_L_EN BIT(3) +#define PLL_TXCLK_EN BIT(1) +#define PLL_RXCLK_EN BIT(0) + +/* EMAC_SGMII_PHY_RX_PWR_CTRL */ +#define L0_RX_SIGDET_EN BIT(7) +#define L0_RX_TERM_MODE(x) (((x) & 3) << 4) +#define L0_RX_I_EN BIT(1) + +/* EMAC_SGMII_PHY_TX_PWR_CTRL */ +#define L0_TX_EN BIT(5) +#define L0_CLKBUF_EN BIT(4) +#define L0_TRAN_BIAS_EN BIT(1) + +/* EMAC_SGMII_PHY_LANE_CTRL1 */ +#define L0_RX_EQUALIZE_ENABLE BIT(6) +#define L0_RESET_TSYNC_EN BIT(4) +#define L0_DRV_LVL(x) ((x) & 0xf) + +/* EMAC_SGMII_PHY_AUTONEG_CFG2 */ +#define FORCE_AN_TX_CFG BIT(5) +#define FORCE_AN_RX_CFG BIT(4) +#define AN_ENABLE BIT(0) + +/* EMAC_SGMII_PHY_SPEED_CFG1 */ +#define DUPLEX_MODE BIT(4) +#define SPDMODE_1000 BIT(1) +#define SPDMODE_100 BIT(0) +#define SPDMODE_10 0 +#define SPDMODE_BMSK 3 +#define SPDMODE_SHFT 0 + +/* EMAC_SGMII_PHY_POW_DWN_CTRL0 */ +#define PWRDN_B BIT(0) +#define CDR_MAX_CNT(x) ((x) & 0xff) + +/* EMAC_QSERDES_TX_BIST_MODE_LANENO */ +#define BIST_LANE_NUMBER(x) (((x) & 3) << 5) +#define BISTMODE(x) ((x) & 0x1f) + +/* EMAC_QSERDES_COM_PLLLOCK_CMPx */ +#define PLLLOCK_CMP(x) ((x) & 0xff) + +/* EMAC_SGMII_PHY_RESET_CTRL */ +#define PHY_SW_RESET BIT(0) + +/* EMAC_SGMII_PHY_IRQ_CMD */ +#define IRQ_GLOBAL_CLEAR BIT(0) + +/* EMAC_SGMII_PHY_INTERRUPT_MASK */ +#define DECODE_CODE_ERR BIT(7) +#define DECODE_DISP_ERR BIT(6) +#define PLL_UNLOCK BIT(5) +#define AN_ILLEGAL_TERM BIT(4) +#define SYNC_FAIL BIT(3) +#define AN_START BIT(2) +#define AN_END BIT(1) +#define AN_REQUEST BIT(0) + +#define SGMII_PHY_IRQ_CLR_WAIT_TIME 10 + +#define SGMII_PHY_INTERRUPT_ERR (\ + DECODE_CODE_ERR |\ + DECODE_DISP_ERR) + +#define SGMII_ISR_AN_MASK (\ + AN_REQUEST |\ + AN_START |\ + AN_END |\ + AN_ILLEGAL_TERM |\ + PLL_UNLOCK |\ + SYNC_FAIL) + +#define SGMII_ISR_MASK (\ + SGMII_PHY_INTERRUPT_ERR |\ + SGMII_ISR_AN_MASK) + +/* SGMII TX_CONFIG */ +#define TXCFG_LINK 0x8000 +#define TXCFG_MODE_BMSK 0x1c00 +#define TXCFG_1000_FULL 0x1800 +#define TXCFG_100_FULL 0x1400 +#define TXCFG_100_HALF 0x0400 +#define TXCFG_10_FULL 0x1000 +#define TXCFG_10_HALF 0x0000 + +#define SERDES_START_WAIT_TIMES 100 + +struct emac_reg_write { + unsigned int offset; + u32 val; +}; + +static void emac_reg_write_all(void __iomem *base, + const struct emac_reg_write *itr, size_t size) +{ + size_t i; + + for (i = 0; i < size; ++itr, ++i) + writel(itr->val, base + itr->offset); +} + +static const struct emac_reg_write physical_coding_sublayer_programming_v1[] = { + {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)}, + {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B}, + {EMAC_SGMII_PHY_CMN_PWR_CTRL, + BIAS_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | PLL_RXCLK_EN}, + {EMAC_SGMII_PHY_TX_PWR_CTRL, L0_TX_EN | L0_CLKBUF_EN | L0_TRAN_BIAS_EN}, + {EMAC_SGMII_PHY_RX_PWR_CTRL, + L0_RX_SIGDET_EN | L0_RX_TERM_MODE(1) | L0_RX_I_EN}, + {EMAC_SGMII_PHY_CMN_PWR_CTRL, + BIAS_EN | PLL_EN | SYSCLK_EN | CLKBUF_L_EN | PLL_TXCLK_EN | + PLL_RXCLK_EN}, + {EMAC_SGMII_PHY_LANE_CTRL1, + L0_RX_EQUALIZE_ENABLE | L0_RESET_TSYNC_EN | L0_DRV_LVL(15)}, +}; + +static const struct emac_reg_write sysclk_refclk_setting[] = { + {EMAC_QSERDES_COM_SYSCLK_EN_SEL, SYSCLK_SEL_CMOS}, + {EMAC_QSERDES_COM_SYS_CLK_CTRL, SYSCLK_CM | SYSCLK_AC_COUPLE}, +}; + +static const struct emac_reg_write pll_setting[] = { + {EMAC_QSERDES_COM_PLL_IP_SETI, PLL_IPSETI(1)}, + {EMAC_QSERDES_COM_PLL_CP_SETI, PLL_CPSETI(59)}, + {EMAC_QSERDES_COM_PLL_IP_SETP, PLL_IPSETP(10)}, + {EMAC_QSERDES_COM_PLL_CP_SETP, PLL_CPSETP(9)}, + {EMAC_QSERDES_COM_PLL_CRCTRL, PLL_RCTRL(15) | PLL_CCTRL(11)}, + {EMAC_QSERDES_COM_PLL_CNTRL, OCP_EN | PLL_DIV_FFEN | PLL_DIV_ORD}, + {EMAC_QSERDES_COM_DEC_START1, DEC_START1_MUX | DEC_START1(2)}, + {EMAC_QSERDES_COM_DEC_START2, DEC_START2_MUX | DEC_START2}, + {EMAC_QSERDES_COM_DIV_FRAC_START1, + DIV_FRAC_START_MUX | DIV_FRAC_START(85)}, + {EMAC_QSERDES_COM_DIV_FRAC_START2, + DIV_FRAC_START_MUX | DIV_FRAC_START(42)}, + {EMAC_QSERDES_COM_DIV_FRAC_START3, + DIV_FRAC_START3_MUX | DIV_FRAC_START3(3)}, + {EMAC_QSERDES_COM_PLLLOCK_CMP1, PLLLOCK_CMP(43)}, + {EMAC_QSERDES_COM_PLLLOCK_CMP2, PLLLOCK_CMP(104)}, + {EMAC_QSERDES_COM_PLLLOCK_CMP3, PLLLOCK_CMP(0)}, + {EMAC_QSERDES_COM_PLLLOCK_CMP_EN, PLLLOCK_CMP_EN}, + {EMAC_QSERDES_COM_RESETSM_CNTRL, FRQ_TUNE_MODE}, +}; + +static const struct emac_reg_write cdr_setting[] = { + {EMAC_QSERDES_RX_CDR_CONTROL, + SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(2)}, + {EMAC_QSERDES_RX_CDR_CONTROL2, + SECONDORDERENABLE | FIRSTORDER_THRESH(3) | SECONDORDERGAIN(4)}, +}; + +static const struct emac_reg_write tx_rx_setting[] = { + {EMAC_QSERDES_TX_BIST_MODE_LANENO, 0}, + {EMAC_QSERDES_TX_TX_DRV_LVL, TX_DRV_LVL_MUX | TX_DRV_LVL(15)}, + {EMAC_QSERDES_TX_TRAN_DRVR_EMP_EN, EMP_EN_MUX | EMP_EN}, + {EMAC_QSERDES_TX_TX_EMP_POST1_LVL, + TX_EMP_POST1_LVL_MUX | TX_EMP_POST1_LVL(1)}, + {EMAC_QSERDES_RX_RX_EQ_GAIN12, RX_EQ_GAIN2(15) | RX_EQ_GAIN1(15)}, + {EMAC_QSERDES_TX_LANE_MODE, LANE_MODE(8)}, +}; + +static const struct emac_reg_write sgmii_v2_laned[] = { + /* CDR Settings */ + {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0, + UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)}, + {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(6)}, + {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)}, + + /* TX/RX Settings */ + {EMAC_SGMII_LN_RX_EN_SIGNAL, SIGDET_LP_BYP_PS4 | SIGDET_EN_PS0_TO_PS2}, + + {EMAC_SGMII_LN_DRVR_CTRL0, TXVAL_VALID_INIT | KR_PCIGEN3_MODE}, + {EMAC_SGMII_LN_DRVR_TAP_EN, MAIN_EN}, + {EMAC_SGMII_LN_TX_MARGINING, TX_MARGINING_MUX | TX_MARGINING(25)}, + {EMAC_SGMII_LN_TX_PRE, TX_PRE_MUX}, + {EMAC_SGMII_LN_TX_POST, TX_POST_MUX}, + + {EMAC_SGMII_LN_CML_CTRL_MODE0, + CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)}, + {EMAC_SGMII_LN_MIXER_CTRL_MODE0, + MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)}, + {EMAC_SGMII_LN_VGA_INITVAL, VGA_THRESH_DFE(31)}, + {EMAC_SGMII_LN_SIGDET_ENABLES, + SIGDET_LP_BYP_PS0_TO_PS2 | SIGDET_FLT_BYP}, + {EMAC_SGMII_LN_SIGDET_CNTRL, SIGDET_LVL(8)}, + + {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL, SIGDET_DEGLITCH_CTRL(4)}, + {EMAC_SGMII_LN_RX_MISC_CNTRL0, 0}, + {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV, + DRVR_LOGIC_CLK_EN | DRVR_LOGIC_CLK_DIV(4)}, + + {EMAC_SGMII_LN_PARALLEL_RATE, PARALLEL_RATE_MODE0(1)}, + {EMAC_SGMII_LN_TX_BAND_MODE, BAND_MODE0(2)}, + {EMAC_SGMII_LN_RX_BAND, BAND_MODE0(3)}, + {EMAC_SGMII_LN_LANE_MODE, LANE_MODE(26)}, + {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0, CDR_PD_SEL_MODE0(3)}, + {EMAC_SGMII_LN_RSM_CONFIG, BYPASS_RSM_SAMP_CAL | BYPASS_RSM_DLL_CAL}, +}; + +static const struct emac_reg_write physical_coding_sublayer_programming_v2[] = { + {EMAC_SGMII_PHY_POW_DWN_CTRL0, PWRDN_B}, + {EMAC_SGMII_PHY_CDR_CTRL0, CDR_MAX_CNT(15)}, + {EMAC_SGMII_PHY_TX_PWR_CTRL, 0}, + {EMAC_SGMII_PHY_LANE_CTRL1, L0_RX_EQUALIZE_ENABLE}, +}; + +static int emac_sgmii_link_init(struct emac_adapter *adpt) +{ + struct phy_device *phydev = adpt->phydev; + struct emac_phy *phy = &adpt->phy; + u32 val; + + val = readl(phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2); + + if (phydev->autoneg == AUTONEG_ENABLE) { + val &= ~(FORCE_AN_RX_CFG | FORCE_AN_TX_CFG); + val |= AN_ENABLE; + writel(val, phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2); + } else { + u32 speed_cfg; + + switch (phydev->speed) { + case SPEED_10: + speed_cfg = SPDMODE_10; + break; + case SPEED_100: + speed_cfg = SPDMODE_100; + break; + case SPEED_1000: + speed_cfg = SPDMODE_1000; + break; + default: + return -EINVAL; + } + + if (phydev->duplex == DUPLEX_FULL) + speed_cfg |= DUPLEX_MODE; + + val &= ~AN_ENABLE; + writel(speed_cfg, phy->base + EMAC_SGMII_PHY_SPEED_CFG1); + writel(val, phy->base + EMAC_SGMII_PHY_AUTONEG_CFG2); + } + + return 0; +} + +static int emac_sgmii_irq_clear(struct emac_adapter *adpt, u32 irq_bits) +{ + struct emac_phy *phy = &adpt->phy; + u32 status; + + writel_relaxed(irq_bits, phy->base + EMAC_SGMII_PHY_INTERRUPT_CLEAR); + writel_relaxed(IRQ_GLOBAL_CLEAR, phy->base + EMAC_SGMII_PHY_IRQ_CMD); + /* Ensure interrupt clear command is written to HW */ + wmb(); + + /* After set the IRQ_GLOBAL_CLEAR bit, the status clearing must + * be confirmed before clearing the bits in other registers. + * It takes a few cycles for hw to clear the interrupt status. + */ + if (readl_poll_timeout_atomic(phy->base + + EMAC_SGMII_PHY_INTERRUPT_STATUS, + status, !(status & irq_bits), 1, + SGMII_PHY_IRQ_CLR_WAIT_TIME)) { + netdev_err(adpt->netdev, + "error: failed clear SGMII irq: status:0x%x bits:0x%x\n", + status, irq_bits); + return -EIO; + } + + /* Finalize clearing procedure */ + writel_relaxed(0, phy->base + EMAC_SGMII_PHY_IRQ_CMD); + writel_relaxed(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_CLEAR); + + /* Ensure that clearing procedure finalization is written to HW */ + wmb(); + + return 0; +} + +int emac_sgmii_init_v1(struct emac_adapter *adpt) +{ + struct emac_phy *phy = &adpt->phy; + unsigned int i; + int ret; + + ret = emac_sgmii_link_init(adpt); + if (ret) + return ret; + + emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v1, + ARRAY_SIZE(physical_coding_sublayer_programming_v1)); + emac_reg_write_all(phy->base, sysclk_refclk_setting, + ARRAY_SIZE(sysclk_refclk_setting)); + emac_reg_write_all(phy->base, pll_setting, ARRAY_SIZE(pll_setting)); + emac_reg_write_all(phy->base, cdr_setting, ARRAY_SIZE(cdr_setting)); + emac_reg_write_all(phy->base, tx_rx_setting, + ARRAY_SIZE(tx_rx_setting)); + + /* Power up the Ser/Des engine */ + writel(SERDES_START, phy->base + EMAC_SGMII_PHY_SERDES_START); + + for (i = 0; i < SERDES_START_WAIT_TIMES; i++) { + if (readl(phy->base + EMAC_QSERDES_COM_RESET_SM) & READY) + break; + usleep_range(100, 200); + } + + if (i == SERDES_START_WAIT_TIMES) { + netdev_err(adpt->netdev, "error: ser/des failed to start\n"); + return -EIO; + } + /* Mask out all the SGMII Interrupt */ + writel(0, phy->base + EMAC_SGMII_PHY_INTERRUPT_MASK); + + emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR); + + return 0; +} + +int emac_sgmii_init_v2(struct emac_adapter *adpt) +{ + struct emac_phy *phy = &adpt->phy; + void __iomem *phy_regs = phy->base; + void __iomem *laned = phy->digital; + unsigned int i; + u32 lnstatus; + int ret; + + ret = emac_sgmii_link_init(adpt); + if (ret) + return ret; + + /* PCS lane-x init */ + emac_reg_write_all(phy->base, physical_coding_sublayer_programming_v2, + ARRAY_SIZE(physical_coding_sublayer_programming_v2)); + + /* SGMII lane-x init */ + emac_reg_write_all(phy->digital, + sgmii_v2_laned, ARRAY_SIZE(sgmii_v2_laned)); + + /* Power up PCS and start reset lane state machine */ + + writel(0, phy_regs + EMAC_SGMII_PHY_RESET_CTRL); + writel(1, laned + SGMII_LN_RSM_START); + + /* Wait for c_ready assertion */ + for (i = 0; i < SERDES_START_WAIT_TIMES; i++) { + lnstatus = readl(phy_regs + SGMII_PHY_LN_LANE_STATUS); + if (lnstatus & BIT(1)) + break; + usleep_range(100, 200); + } + + if (i == SERDES_START_WAIT_TIMES) { + netdev_err(adpt->netdev, "SGMII failed to start\n"); + return -EIO; + } + + /* Disable digital and SERDES loopback */ + writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN0); + writel(0, phy_regs + SGMII_PHY_LN_BIST_GEN2); + writel(0, phy_regs + SGMII_PHY_LN_CDR_CTRL1); + + /* Mask out all the SGMII Interrupt */ + writel(0, phy_regs + EMAC_SGMII_PHY_INTERRUPT_MASK); + + emac_sgmii_irq_clear(adpt, SGMII_PHY_INTERRUPT_ERR); + + return 0; +} + +static void emac_sgmii_reset_prepare(struct emac_adapter *adpt) +{ + struct emac_phy *phy = &adpt->phy; + u32 val; + + /* Reset PHY */ + val = readl(phy->base + EMAC_EMAC_WRAPPER_CSR2); + writel(((val & ~PHY_RESET) | PHY_RESET), phy->base + + EMAC_EMAC_WRAPPER_CSR2); + /* Ensure phy-reset command is written to HW before the release cmd */ + msleep(50); + val = readl(phy->base + EMAC_EMAC_WRAPPER_CSR2); + writel((val & ~PHY_RESET), phy->base + EMAC_EMAC_WRAPPER_CSR2); + /* Ensure phy-reset release command is written to HW before initializing + * SGMII + */ + msleep(50); +} + +void emac_sgmii_reset(struct emac_adapter *adpt) +{ + int ret; + + clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 19200000); + emac_sgmii_reset_prepare(adpt); + + ret = adpt->phy.initialize(adpt); + if (ret) + netdev_err(adpt->netdev, + "could not reinitialize internal PHY (error=%i)\n", + ret); + + clk_set_rate(adpt->clk[EMAC_CLK_HIGH_SPEED], 125000000); +} + +static int emac_sgmii_acpi_match(struct device *dev, void *data) +{ + static const struct acpi_device_id match_table[] = { + { + .id = "QCOM8071", + .driver_data = (kernel_ulong_t)emac_sgmii_init_v2, + }, + {} + }; + const struct acpi_device_id *id = acpi_match_device(match_table, dev); + emac_sgmii_initialize *initialize = data; + + if (id) + *initialize = (emac_sgmii_initialize)id->driver_data; + + return !!id; +} + +static const struct of_device_id emac_sgmii_dt_match[] = { + { + .compatible = "qcom,fsm9900-emac-sgmii", + .data = emac_sgmii_init_v1, + }, + { + .compatible = "qcom,qdf2432-emac-sgmii", + .data = emac_sgmii_init_v2, + }, + {} +}; + +int emac_sgmii_config(struct platform_device *pdev, struct emac_adapter *adpt) +{ + struct platform_device *sgmii_pdev = NULL; + struct emac_phy *phy = &adpt->phy; + struct resource *res; + int ret; + + if (has_acpi_companion(&pdev->dev)) { + struct device *dev; + + dev = device_find_child(&pdev->dev, &phy->initialize, + emac_sgmii_acpi_match); + + if (!dev) { + dev_err(&pdev->dev, "cannot find internal phy node\n"); + return -ENODEV; + } + + sgmii_pdev = to_platform_device(dev); + } else { + const struct of_device_id *match; + struct device_node *np; + + np = of_parse_phandle(pdev->dev.of_node, "internal-phy", 0); + if (!np) { + dev_err(&pdev->dev, "missing internal-phy property\n"); + return -ENODEV; + } + + sgmii_pdev = of_find_device_by_node(np); + if (!sgmii_pdev) { + dev_err(&pdev->dev, "invalid internal-phy property\n"); + return -ENODEV; + } + + match = of_match_device(emac_sgmii_dt_match, &sgmii_pdev->dev); + if (!match) { + dev_err(&pdev->dev, "unrecognized internal phy node\n"); + ret = -ENODEV; + goto error_put_device; + } + + phy->initialize = (emac_sgmii_initialize)match->data; + } + + /* Base address is the first address */ + res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -EINVAL; + goto error_put_device; + } + + phy->base = ioremap(res->start, resource_size(res)); + if (!phy->base) { + ret = -ENOMEM; + goto error_put_device; + } + + /* v2 SGMII has a per-lane digital digital, so parse it if it exists */ + res = platform_get_resource(sgmii_pdev, IORESOURCE_MEM, 1); + if (res) { + phy->digital = ioremap(res->start, resource_size(res)); + if (!phy->digital) { + ret = -ENOMEM; + goto error_unmap_base; + } + } + + ret = phy->initialize(adpt); + if (ret) + goto error; + + /* We've remapped the addresses, so we don't need the device any + * more. of_find_device_by_node() says we should release it. + */ + put_device(&sgmii_pdev->dev); + + return 0; + +error: + if (phy->digital) + iounmap(phy->digital); +error_unmap_base: + iounmap(phy->base); +error_put_device: + put_device(&sgmii_pdev->dev); + + return ret; +} |
