1 files changed, 31 insertions, 19 deletions

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 02b5a343b195..0875ecfe3372 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -7561,8 +7561,14 @@ int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac,
 	}
 
 	rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
-	if (rc < 0)
+
+	if (rc == -EEXIST) {
+		DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc);
+		/* do not treat adding same MAC as error */
+		rc = 0;
+	} else if (rc < 0)
 		BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del"));
+
 	return rc;
 }
 
@@ -8427,6 +8433,8 @@ unload_error:
 
 	/* Disable HW interrupts, NAPI */
 	bnx2x_netif_stop(bp, 1);
+	/* Delete all NAPI objects */
+	bnx2x_del_all_napi(bp);
 
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
@@ -9823,12 +9831,13 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
 	}
 
 #ifdef CONFIG_PCI_MSI
-	/*
-	 * It's expected that number of CAM entries for this functions is equal
-	 * to the number evaluated based on the MSI-X table size. We want a
-	 * harsh warning if these values are different!
+	/* Due to new PF resource allocation by MFW T7.4 and above, it's
+	 * optional that number of CAM entries will not be equal to the value
+	 * advertised in PCI.
+	 * Driver should use the minimal value of both as the actual status
+	 * block count
 	 */
-	WARN_ON(bp->igu_sb_cnt != igu_sb_cnt);
+	bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt);
 #endif
 
 	if (igu_sb_cnt == 0)
@@ -10292,13 +10301,11 @@ static void __devinit bnx2x_get_fcoe_info(struct bnx2x *bp)
 				dev_info.port_hw_config[port].
 				 fcoe_wwn_node_name_lower);
 	} else if (!IS_MF_SD(bp)) {
-		u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
-
 		/*
 		 * Read the WWN info only if the FCoE feature is enabled for
 		 * this function.
 		 */
-		if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD)
+		if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp))
 			bnx2x_get_ext_wwn_info(bp, func);
 
 	} else if (IS_MF_FCOE_SD(bp))
@@ -11071,7 +11078,14 @@ static int bnx2x_set_uc_list(struct bnx2x *bp)
 	netdev_for_each_uc_addr(ha, dev) {
 		rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true,
 				       BNX2X_UC_LIST_MAC, &ramrod_flags);
-		if (rc < 0) {
+		if (rc == -EEXIST) {
+			DP(BNX2X_MSG_SP,
+			   "Failed to schedule ADD operations: %d\n", rc);
+			/* do not treat adding same MAC as error */
+			rc = 0;
+
+		} else if (rc < 0) {
+
 			BNX2X_ERR("Failed to schedule ADD operations: %d\n",
 				  rc);
 			return rc;
@@ -11229,10 +11243,12 @@ static int bnx2x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 static void poll_bnx2x(struct net_device *dev)
 {
 	struct bnx2x *bp = netdev_priv(dev);
+	int i;
 
-	disable_irq(bp->pdev->irq);
-	bnx2x_interrupt(bp->pdev->irq, dev);
-	enable_irq(bp->pdev->irq);
+	for_each_eth_queue(bp, i) {
+		struct bnx2x_fastpath *fp = &bp->fp[i];
+		napi_schedule(&bnx2x_fp(bp, fp->index, napi));
+	}
 }
 #endif
 
@@ -11899,9 +11915,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	 */
 	bnx2x_set_int_mode(bp);
 
-	/* Add all NAPI objects */
-	bnx2x_add_all_napi(bp);
-
 	rc = register_netdev(dev);
 	if (rc) {
 		dev_err(&pdev->dev, "Cannot register net device\n");
@@ -11976,9 +11989,6 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 
 	unregister_netdev(dev);
 
-	/* Delete all NAPI objects */
-	bnx2x_del_all_napi(bp);
-
 	/* Power on: we can't let PCI layer write to us while we are in D3 */
 	bnx2x_set_power_state(bp, PCI_D0);
 
@@ -12025,6 +12035,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	bnx2x_tx_disable(bp);
 
 	bnx2x_netif_stop(bp, 0);
+	/* Delete all NAPI objects */
+	bnx2x_del_all_napi(bp);
 
 	del_timer_sync(&bp->timer);