diff options
Diffstat (limited to 'drivers/net/e1000e/ethtool.c')
| -rw-r--r-- | drivers/net/e1000e/ethtool.c | 1774 |
1 files changed, 1774 insertions, 0 deletions
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c new file mode 100644 index 000000000000..0e80406bfbd7 --- /dev/null +++ b/drivers/net/e1000e/ethtool.c @@ -0,0 +1,1774 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for e1000 */ + +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/delay.h> + +#include "e1000.h" + +struct e1000_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ + offsetof(struct e1000_adapter, m) +static const struct e1000_stats e1000_gstrings_stats[] = { + { "rx_packets", E1000_STAT(stats.gprc) }, + { "tx_packets", E1000_STAT(stats.gptc) }, + { "rx_bytes", E1000_STAT(stats.gorcl) }, + { "tx_bytes", E1000_STAT(stats.gotcl) }, + { "rx_broadcast", E1000_STAT(stats.bprc) }, + { "tx_broadcast", E1000_STAT(stats.bptc) }, + { "rx_multicast", E1000_STAT(stats.mprc) }, + { "tx_multicast", E1000_STAT(stats.mptc) }, + { "rx_errors", E1000_STAT(net_stats.rx_errors) }, + { "tx_errors", E1000_STAT(net_stats.tx_errors) }, + { "tx_dropped", E1000_STAT(net_stats.tx_dropped) }, + { "multicast", E1000_STAT(stats.mprc) }, + { "collisions", E1000_STAT(stats.colc) }, + { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) }, + { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) }, + { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, + { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, + { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, + { "rx_missed_errors", E1000_STAT(stats.mpc) }, + { "tx_aborted_errors", E1000_STAT(stats.ecol) }, + { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, + { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) }, + { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) }, + { "tx_window_errors", E1000_STAT(stats.latecol) }, + { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, + { "tx_deferred_ok", E1000_STAT(stats.dc) }, + { "tx_single_coll_ok", E1000_STAT(stats.scc) }, + { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, + { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, + { "tx_restart_queue", E1000_STAT(restart_queue) }, + { "rx_long_length_errors", E1000_STAT(stats.roc) }, + { "rx_short_length_errors", E1000_STAT(stats.ruc) }, + { "rx_align_errors", E1000_STAT(stats.algnerrc) }, + { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) }, + { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) }, + { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) }, + { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) }, + { "tx_flow_control_xon", E1000_STAT(stats.xontxc) }, + { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, + { "rx_long_byte_count", E1000_STAT(stats.gorcl) }, + { "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, + { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, + { "rx_header_split", E1000_STAT(rx_hdr_split) }, + { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, + { "tx_smbus", E1000_STAT(stats.mgptc) }, + { "rx_smbus", E1000_STAT(stats.mgprc) }, + { "dropped_smbus", E1000_STAT(stats.mgpdc) }, + { "rx_dma_failed", E1000_STAT(rx_dma_failed) }, + { "tx_dma_failed", E1000_STAT(tx_dma_failed) }, +}; + +#define E1000_GLOBAL_STATS_LEN \ + sizeof(e1000_gstrings_stats) / sizeof(struct e1000_stats) +#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN) +static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define E1000_TEST_LEN sizeof(e1000_gstrings_test) / ETH_GSTRING_LEN + +static int e1000_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + if (hw->media_type == e1000_media_type_copper) { + + ecmd->supported = (SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_TP); + if (hw->phy.type == e1000_phy_ife) + ecmd->supported &= ~SUPPORTED_1000baseT_Full; + ecmd->advertising = ADVERTISED_TP; + + if (hw->mac.autoneg == 1) { + ecmd->advertising |= ADVERTISED_Autoneg; + /* the e1000 autoneg seems to match ethtool nicely */ + ecmd->advertising |= hw->phy.autoneg_advertised; + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy.addr; + ecmd->transceiver = XCVR_INTERNAL; + + } else { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE | + SUPPORTED_Autoneg); + + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg); + + ecmd->port = PORT_FIBRE; + ecmd->transceiver = XCVR_EXTERNAL; + } + + if (er32(STATUS) & E1000_STATUS_LU) { + + adapter->hw.mac.ops.get_link_up_info(hw, &adapter->link_speed, + &adapter->link_duplex); + ecmd->speed = adapter->link_speed; + + /* unfortunately FULL_DUPLEX != DUPLEX_FULL + * and HALF_DUPLEX != DUPLEX_HALF */ + + if (adapter->link_duplex == FULL_DUPLEX) + ecmd->duplex = DUPLEX_FULL; + else + ecmd->duplex = DUPLEX_HALF; + } else { + ecmd->speed = -1; + ecmd->duplex = -1; + } + + ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) || + hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; + return 0; +} + +static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) +{ + struct e1000_mac_info *mac = &adapter->hw.mac; + + mac->autoneg = 0; + + /* Fiber NICs only allow 1000 gbps Full duplex */ + if ((adapter->hw.media_type == e1000_media_type_fiber) && + spddplx != (SPEED_1000 + DUPLEX_FULL)) { + ndev_err(adapter->netdev, "Unsupported Speed/Duplex " + "configuration\n"); + return -EINVAL; + } + + switch (spddplx) { + case SPEED_10 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_10_HALF; + break; + case SPEED_10 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_10_FULL; + break; + case SPEED_100 + DUPLEX_HALF: + mac->forced_speed_duplex = ADVERTISE_100_HALF; + break; + case SPEED_100 + DUPLEX_FULL: + mac->forced_speed_duplex = ADVERTISE_100_FULL; + break; + case SPEED_1000 + DUPLEX_FULL: + mac->autoneg = 1; + adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; + break; + case SPEED_1000 + DUPLEX_HALF: /* not supported */ + default: + ndev_err(adapter->netdev, "Unsupported Speed/Duplex " + "configuration\n"); + return -EINVAL; + } + return 0; +} + +static int e1000_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + /* When SoL/IDER sessions are active, autoneg/speed/duplex + * cannot be changed */ + if (e1000_check_reset_block(hw)) { + ndev_err(netdev, "Cannot change link " + "characteristics when SoL/IDER is active.\n"); + return -EINVAL; + } + + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) + msleep(1); + + if (ecmd->autoneg == AUTONEG_ENABLE) { + hw->mac.autoneg = 1; + if (hw->media_type == e1000_media_type_fiber) + hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE | + ADVERTISED_Autoneg; + else + hw->phy.autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; + ecmd->advertising = hw->phy.autoneg_advertised; + } else { + if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { + clear_bit(__E1000_RESETTING, &adapter->state); + return -EINVAL; + } + } + + /* reset the link */ + + if (netif_running(adapter->netdev)) { + e1000e_down(adapter); + e1000e_up(adapter); + } else { + e1000e_reset(adapter); + } + + clear_bit(__E1000_RESETTING, &adapter->state); + return 0; +} + +static void e1000_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + pause->autoneg = + (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); + + if (hw->mac.fc == e1000_fc_rx_pause) { + pause->rx_pause = 1; + } else if (hw->mac.fc == e1000_fc_tx_pause) { + pause->tx_pause = 1; + } else if (hw->mac.fc == e1000_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; + } +} + +static int e1000_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int retval = 0; + + adapter->fc_autoneg = pause->autoneg; + + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) + msleep(1); + + if (pause->rx_pause && pause->tx_pause) + hw->mac.fc = e1000_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + hw->mac.fc = e1000_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + hw->mac.fc = e1000_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + hw->mac.fc = e1000_fc_none; + + hw->mac.original_fc = hw->mac.fc; + + if (adapter->fc_autoneg == AUTONEG_ENABLE) { + if (netif_running(adapter->netdev)) { + e1000e_down(adapter); + e1000e_up(adapter); + } else { + e1000e_reset(adapter); + } + } else { + retval = ((hw->media_type == e1000_media_type_fiber) ? + hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + } + + clear_bit(__E1000_RESETTING, &adapter->state); + return retval; +} + +static u32 e1000_get_rx_csum(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + return (adapter->flags & FLAG_RX_CSUM_ENABLED); +} + +static int e1000_set_rx_csum(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (data) + adapter->flags |= FLAG_RX_CSUM_ENABLED; + else + adapter->flags &= ~FLAG_RX_CSUM_ENABLED; + + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + else + e1000e_reset(adapter); + return 0; +} + +static u32 e1000_get_tx_csum(struct net_device *netdev) +{ + return ((netdev->features & NETIF_F_HW_CSUM) != 0); +} + +static int e1000_set_tx_csum(struct net_device *netdev, u32 data) +{ + if (data) + netdev->features |= NETIF_F_HW_CSUM; + else + netdev->features &= ~NETIF_F_HW_CSUM; + + return 0; +} + +static int e1000_set_tso(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (data) { + netdev->features |= NETIF_F_TSO; + netdev->features |= NETIF_F_TSO6; + } else { + netdev->features &= ~NETIF_F_TSO; + netdev->features &= ~NETIF_F_TSO6; + } + + ndev_info(netdev, "TSO is %s\n", + data ? "Enabled" : "Disabled"); + adapter->flags |= FLAG_TSO_FORCE; + return 0; +} + +static u32 e1000_get_msglevel(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void e1000_set_msglevel(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int e1000_get_regs_len(struct net_device *netdev) +{ +#define E1000_REGS_LEN 32 /* overestimate */ + return E1000_REGS_LEN * sizeof(u32); +} + +static void e1000_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u16 phy_data; + u8 revision_id; + + memset(p, 0, E1000_REGS_LEN * sizeof(u32)); + + pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id); + + regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device; + + regs_buff[0] = er32(CTRL); + regs_buff[1] = er32(STATUS); + + regs_buff[2] = er32(RCTL); + regs_buff[3] = er32(RDLEN); + regs_buff[4] = er32(RDH); + regs_buff[5] = er32(RDT); + regs_buff[6] = er32(RDTR); + + regs_buff[7] = er32(TCTL); + regs_buff[8] = er32(TDLEN); + regs_buff[9] = er32(TDH); + regs_buff[10] = er32(TDT); + regs_buff[11] = er32(TIDV); + + regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */ + if (hw->phy.type == e1000_phy_m88) { + e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + regs_buff[13] = (u32)phy_data; /* cable length */ + regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + regs_buff[17] = (u32)phy_data; /* extended 10bt distance */ + regs_buff[18] = regs_buff[13]; /* cable polarity */ + regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */ + regs_buff[20] = regs_buff[17]; /* polarity correction */ + /* phy receive errors */ + regs_buff[22] = adapter->phy_stats.receive_errors; + regs_buff[23] = regs_buff[13]; /* mdix mode */ + } + regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */ + e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); + regs_buff[24] = (u32)phy_data; /* phy local receiver status */ + regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ +} + +static int e1000_get_eeprom_len(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + return adapter->hw.nvm.word_size * 2; +} + +static int e1000_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word; + int last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + + eeprom_buff = kmalloc(sizeof(u16) * + (last_word - first_word + 1), GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + if (hw->nvm.type == e1000_nvm_eeprom_spi) { + ret_val = e1000_read_nvm(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + } else { + for (i = 0; i < last_word - first_word + 1; i++) { + ret_val = e1000_read_nvm(hw, first_word + i, 1, + &eeprom_buff[i]); + if (ret_val) + break; + } + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int e1000_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len; + int first_word; + int last_word; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EOPNOTSUPP; + + if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) + return -EFAULT; + + max_len = hw->nvm.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = (void *)eeprom_buff; + + if (eeprom->offset & 1) { + /* need read/modify/write of first changed EEPROM word */ + /* only the second byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]); + ptr++; + } + if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) + /* need read/modify/write of last changed EEPROM word */ + /* only the first byte of the word is being modified */ + ret_val = e1000_read_nvm(hw, last_word, 1, + &eeprom_buff[last_word - first_word]); + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); + + ret_val = e1000_write_nvm(hw, first_word, + last_word - first_word + 1, eeprom_buff); + + /* Update the checksum over the first part of the EEPROM if needed + * and flush shadow RAM for 82573 controllers */ + if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) || + (hw->mac.type == e1000_82573))) + e1000e_update_nvm_checksum(hw); + + kfree(eeprom_buff); + return ret_val; +} + +static void e1000_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + u16 eeprom_data; + + strncpy(drvinfo->driver, e1000e_driver_name, 32); + strncpy(drvinfo->version, e1000e_driver_version, 32); + + /* EEPROM image version # is reported as firmware version # for + * PCI-E controllers */ + e1000_read_nvm(&adapter->hw, 5, 1, &eeprom_data); + sprintf(firmware_version, "%d.%d-%d", + (eeprom_data & 0xF000) >> 12, + (eeprom_data & 0x0FF0) >> 4, + eeprom_data & 0x000F); + + strncpy(drvinfo->fw_version, firmware_version, 32); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); + drvinfo->n_stats = E1000_STATS_LEN; + drvinfo->testinfo_len = E1000_TEST_LEN; + drvinfo->regdump_len = e1000_get_regs_len(netdev); + drvinfo->eedump_len = e1000_get_eeprom_len(netdev); +} + +static void e1000_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_ring *tx_ring = adapter->tx_ring; + struct e1000_ring *rx_ring = adapter->rx_ring; + + ring->rx_max_pending = E1000_MAX_RXD; + ring->tx_max_pending = E1000_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int e1000_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_ring *tx_ring, *tx_old; + struct e1000_ring *rx_ring, *rx_old; + int err; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) + msleep(1); + + if (netif_running(adapter->netdev)) + e1000e_down(adapter); + + tx_old = adapter->tx_ring; + rx_old = adapter->rx_ring; + + err = -ENOMEM; + tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!tx_ring) + goto err_alloc_tx; + + rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); + if (!rx_ring) + goto err_alloc_rx; + + adapter->tx_ring = tx_ring; + adapter->rx_ring = rx_ring; + + rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD); + rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD)); + rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); + + tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD); + tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD)); + tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); + + if (netif_running(adapter->netdev)) { + /* Try to get new resources before deleting old */ + err = e1000e_setup_rx_resources(adapter); + if (err) + goto err_setup_rx; + err = e1000e_setup_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* save the new, restore the old in order to free it, + * then restore the new back again */ + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + e1000e_free_rx_resources(adapter); + e1000e_free_tx_resources(adapter); + kfree(tx_old); + kfree(rx_old); + adapter->rx_ring = rx_ring; + adapter->tx_ring = tx_ring; + err = e1000e_up(adapter); + if (err) + goto err_setup; + } + + clear_bit(__E1000_RESETTING, &adapter->state); + return 0; +err_setup_tx: + e1000e_free_rx_resources(adapter); +err_setup_rx: + adapter->rx_ring = rx_old; + adapter->tx_ring = tx_old; + kfree(rx_ring); +err_alloc_rx: + kfree(tx_ring); +err_alloc_tx: + e1000e_up(adapter); +err_setup: + clear_bit(__E1000_RESETTING, &adapter->state); + return err; +} + +#define REG_PATTERN_TEST(R, M, W) REG_PATTERN_TEST_ARRAY(R, 0, M, W) +#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, writeable) \ +{ \ + u32 _pat; \ + u32 _value; \ + u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \ + for (_pat = 0; _pat < ARRAY_SIZE(_test); _pat++) { \ + E1000_WRITE_REG_ARRAY(hw, reg, offset, \ + (_test[_pat] & writeable)); \ + _value = E1000_READ_REG_ARRAY(hw, reg, offset); \ + if (_value != (_test[_pat] & writeable & mask)) { \ + ndev_err(netdev, "pattern test reg %04X " \ + "failed: got 0x%08X expected 0x%08X\n", \ + reg + offset, \ + value, (_test[_pat] & writeable & mask)); \ + *data = reg; \ + return 1; \ + } \ + } \ +} + +#define REG_SET_AND_CHECK(R, M, W) \ +{ \ + u32 _value; \ + __ew32(hw, R, W & M); \ + _value = __er32(hw, R); \ + if ((W & M) != (_value & M)) { \ + ndev_err(netdev, "set/check reg %04X test failed: " \ + "got 0x%08X expected 0x%08X\n", R, (_value & M), \ + (W & M)); \ + *data = R; \ + return 1; \ + } \ +} + +static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &adapter->hw.mac; + struct net_device *netdev = adapter->netdev; + u32 value; + u32 before; + u32 after; + u32 i; + u32 toggle; + + /* The status register is Read Only, so a write should fail. + * Some bits that get toggled are ignored. + */ + switch (mac->type) { + /* there are several bits on newer hardware that are r/w */ + case e1000_82571: + case e1000_82572: + case e1000_80003es2lan: + toggle = 0x7FFFF3FF; + break; + case e1000_82573: + case e1000_ich8lan: + case e1000_ich9lan: + toggle = 0x7FFFF033; + break; + default: + toggle = 0xFFFFF833; + break; + } + + before = er32(STATUS); + value = (er32(STATUS) & toggle); + ew32(STATUS, toggle); + after = er32(STATUS) & toggle; + if (value != after) { + ndev_err(netdev, "failed STATUS register test got: " + "0x%08X expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + ew32(STATUS, before); + + if ((mac->type != e1000_ich8lan) && + (mac->type != e1000_ich9lan)) { + REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF); + } + + REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF); + REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8); + REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF); + REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF); + + REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000); + + before = (((mac->type == e1000_ich8lan) || + (mac->type == e1000_ich9lan)) ? 0x06C3B33E : 0x06DFB3FE); + REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB); + REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000); + + REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x01FFFFFF); + REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFF000, 0xFFFFFFFF); + REG_PATTERN_TEST(E1000_TXCW, 0x0000FFFF, 0x0000FFFF); + REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFF000, 0xFFFFFFFF); + + for (i = 0; i < mac->mta_reg_count; i++) + REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF); + + *data = 0; + return 0; +} + +static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) +{ + u16 temp; + u16 checksum = 0; + u16 i; + + *data = 0; + /* Read and add up the contents of the EEPROM */ + for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { + if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) { + *data = 1; + break; + } + checksum += temp; + } + + /* If Checksum is not Correct return error else test passed */ + if ((checksum != (u16) NVM_SUM) && !(*data)) + *data = 2; + + return *data; +} + +static irqreturn_t e1000_test_intr(int irq, void *data) +{ + struct net_device *netdev = (struct net_device *) data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + + adapter->test_icr |= er32(ICR); + + return IRQ_HANDLED; +} + +static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) +{ + struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; + u32 mask; + u32 shared_int = 1; + u32 irq = adapter->pdev->irq; + int i; + + *data = 0; + + /* NOTE: we don't test MSI interrupts here, yet */ + /* Hook up test interrupt handler just for this test */ + if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + netdev)) { + shared_int = 0; + } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, + netdev->name, netdev)) { + *data = 1; + return -1; + } + ndev_info(netdev, "testing %s interrupt\n", + (shared_int ? "shared" : "unshared")); + + /* Disable all the interrupts */ + ew32(IMC, 0xFFFFFFFF); + msleep(10); + + /* Test each interrupt */ + for (i = 0; i < 10; i++) { + + if (((adapter->hw.mac.type == e1000_ich8lan) || + (adapter->hw.mac.type == e1000_ich9lan)) && i == 8) + continue; + + /* Interrupt to test */ + mask = 1 << i; + + if (!shared_int) { + /* Disable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMC, mask); + ew32(ICS, mask); + msleep(10); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* Enable the interrupt to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was not posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMS, mask); + ew32(ICS, mask); + msleep(10); + + if (!(adapter->test_icr & mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + ew32(IMC, ~mask & 0x00007FFF); + ew32(ICS, ~mask & 0x00007FFF); + msleep(10); + + if (adapter->test_icr) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + ew32(IMC, 0xFFFFFFFF); + msleep(10); + + /* Unhook test interrupt handler */ + free_irq(irq, netdev); + + return *data; +} + +static void e1000_free_desc_rings(struct e1000_adapter *adapter) +{ + struct e1000_ring *tx_ring = &adapter->test_tx_ring; + struct e1000_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + int i; + + if (tx_ring->desc && tx_ring->buffer_info) { + for (i = 0; i < tx_ring->count; i++) { + if (tx_ring->buffer_info[i].dma) + pci_unmap_single(pdev, + tx_ring->buffer_info[i].dma, + tx_ring->buffer_info[i].length, + PCI_DMA_TODEVICE); + if (tx_ring->buffer_info[i].skb) + dev_kfree_skb(tx_ring->buffer_info[i].skb); + } + } + + if (rx_ring->desc && rx_ring->buffer_info) { + for (i = 0; i < rx_ring->count; i++) { + if (rx_ring->buffer_info[i].dma) + pci_unmap_single(pdev, + rx_ring->buffer_info[i].dma, + 2048, PCI_DMA_FROMDEVICE); + if (rx_ring->buffer_info[i].skb) + dev_kfree_skb(rx_ring->buffer_info[i].skb); + } + } + + if (tx_ring->desc) { + dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, + tx_ring->dma); + tx_ring->desc = NULL; + } + if (rx_ring->desc) { + dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, + rx_ring->dma); + rx_ring->desc = NULL; + } + + kfree(tx_ring->buffer_info); + tx_ring->buffer_info = NULL; + kfree(rx_ring->buffer_info); + rx_ring->buffer_info = NULL; +} + +static int e1000_setup_desc_rings(struct e1000_adapter *adapter) +{ + struct e1000_ring *tx_ring = &adapter->test_tx_ring; + struct e1000_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + int size; + int i; + int ret_val; + + /* Setup Tx descriptor ring and Tx buffers */ + + if (!tx_ring->count) + tx_ring->count = E1000_DEFAULT_TXD; + + size = tx_ring->count * sizeof(struct e1000_buffer); + tx_ring->buffer_info = kmalloc(size, GFP_KERNEL); + if (!tx_ring->buffer_info) { + ret_val = 1; + goto err_nomem; + } + memset(tx_ring->buffer_info, 0, size); + + tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + if (!tx_ring->desc) { + ret_val = 2; + goto err_nomem; + } + memset(tx_ring->desc, 0, tx_ring->size); + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + ew32(TDBAL, + ((u64) tx_ring->dma & 0x00000000FFFFFFFF)); + ew32(TDBAH, ((u64) tx_ring->dma >> 32)); + ew32(TDLEN, + tx_ring->count * sizeof(struct e1000_tx_desc)); + ew32(TDH, 0); + ew32(TDT, 0); + ew32(TCTL, + E1000_TCTL_PSP | E1000_TCTL_EN | + E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | + E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT); + + for (i = 0; i < tx_ring->count; i++) { + struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); + struct sk_buff *skb; + unsigned int skb_size = 1024; + + skb = alloc_skb(skb_size, GFP_KERNEL); + if (!skb) { + ret_val = 3; + goto err_nomem; + } + skb_put(skb, skb_size); + tx_ring->buffer_info[i].skb = skb; + tx_ring->buffer_info[i].length = skb->len; + tx_ring->buffer_info[i].dma = + pci_map_single(pdev, skb->data, skb->len, + PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(tx_ring->buffer_info[i].dma)) { + ret_val = 4; + goto err_nomem; + } + tx_desc->buffer_addr = cpu_to_le64( + tx_ring->buffer_info[i].dma); + tx_desc->lower.data = cpu_to_le32(skb->len); + tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | + E1000_TXD_CMD_IFCS | + E1000_TXD_CMD_RPS); + tx_desc->upper.data = 0; + } + + /* Setup Rx descriptor ring and Rx buffers */ + + if (!rx_ring->count) + rx_ring->count = E1000_DEFAULT_RXD; + + size = rx_ring->count * sizeof(struct e1000_buffer); + rx_ring->buffer_info = kmalloc(size, GFP_KERNEL); + if (!rx_ring->buffer_info) { + ret_val = 5; + goto err_nomem; + } + memset(rx_ring->buffer_info, 0, size); + + rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc); + rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + if (!rx_ring->desc) { + ret_val = 6; + goto err_nomem; + } + memset(rx_ring->desc, 0, rx_ring->size); + rx_ring->next_to_use = 0; + rx_ring->next_to_clean = 0; + + rctl = er32(RCTL); + ew32(RCTL, rctl & ~E1000_RCTL_EN); + ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF)); + ew32(RDBAH, ((u64) rx_ring->dma >> 32)); + ew32(RDLEN, rx_ring->size); + ew32(RDH, 0); + ew32(RDT, 0); + rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | + E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | + (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); + ew32(RCTL, rctl); + + for (i = 0; i < rx_ring->count; i++) { + struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i); + struct sk_buff *skb; + + skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL); + if (!skb) { + ret_val = 7; + goto err_nomem; + } + skb_reserve(skb, NET_IP_ALIGN); + rx_ring->buffer_info[i].skb = skb; + rx_ring->buffer_info[i].dma = + pci_map_single(pdev, skb->data, 2048, + PCI_DMA_FROMDEVICE); + if (pci_dma_mapping_error(rx_ring->buffer_info[i].dma)) { + ret_val = 8; + goto err_nomem; + } + rx_desc->buffer_addr = + cpu_to_le64(rx_ring->buffer_info[i].dma); + memset(skb->data, 0x00, skb->len); + } + + return 0; + +err_nomem: + e1000_free_desc_rings(adapter); + return ret_val; +} + +static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) +{ + /* Write out to PHY registers 29 and 30 to disable the Receiver. */ + e1e_wphy(&adapter->hw, 29, 0x001F); + e1e_wphy(&adapter->hw, 30, 0x8FFC); + e1e_wphy(&adapter->hw, 29, 0x001A); + e1e_wphy(&adapter->hw, 30, 0x8FF0); +} + +static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl_reg = 0; + u32 stat_reg = 0; + + adapter->hw.mac.autoneg = 0; + + if (adapter->hw.phy.type == e1000_phy_m88) { + /* Auto-MDI/MDIX Off */ + e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); + /* reset to update Auto-MDI/MDIX */ + e1e_wphy(hw, PHY_CONTROL, 0x9140); + /* autoneg off */ + e1e_wphy(hw, PHY_CONTROL, 0x8140); + } else if (adapter->hw.phy.type == e1000_phy_gg82563) + e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); + + ctrl_reg = er32(CTRL); + + if (adapter->hw.phy.type == e1000_phy_ife) { + /* force 100, set loopback */ + e1e_wphy(hw, PHY_CONTROL, 0x6100); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_100 |/* Force Speed to 100 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } else { + /* force 1000, set loopback */ + e1e_wphy(hw, PHY_CONTROL, 0x4140); + + /* Now set up the MAC to the same speed/duplex as the PHY. */ + ctrl_reg = er32(CTRL); + ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ + ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ + E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ + E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ + E1000_CTRL_FD); /* Force Duplex to FULL */ + } + + if (adapter->hw.media_type == e1000_media_type_copper && + adapter->hw.phy.type == e1000_phy_m88) { + ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ + } else { + /* Set the ILOS bit on the fiber Nic if half duplex link is + * detected. */ + stat_reg = er32(STATUS); + if ((stat_reg & E1000_STATUS_FD) == 0) + ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); + } + + ew32(CTRL, ctrl_reg); + + /* Disable the receiver on the PHY so when a cable is plugged in, the + * PHY does not begin to autoneg when a cable is reconnected to the NIC. + */ + if (adapter->hw.phy.type == e1000_phy_m88) + e1000_phy_disable_receiver(adapter); + + udelay(500); + + return 0; +} + +static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrl = er32(CTRL); + int link = 0; + + /* special requirements for 82571/82572 fiber adapters */ + + /* jump through hoops to make sure link is up because serdes + * link is hardwired up */ + ctrl |= E1000_CTRL_SLU; + ew32(CTRL, ctrl); + + /* disable autoneg */ + ctrl = er32(TXCW); + ctrl &= ~(1 << 31); + ew32(TXCW, ctrl); + + link = (er32(STATUS) & E1000_STATUS_LU); + + if (!link) { + /* set invert loss of signal */ + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_ILOS; + ew32(CTRL, ctrl); + } + + /* special write to serdes control register to enable SerDes analog + * loopback */ +#define E1000_SERDES_LB_ON 0x410 + ew32(SCTL, E1000_SERDES_LB_ON); + msleep(10); + + return 0; +} + +/* only call this for fiber/serdes connections to es2lan */ +static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 ctrlext = er32(CTRL_EXT); + u32 ctrl = er32(CTRL); + + /* save CTRL_EXT to restore later, reuse an empty variable (unused + on mac_type 80003es2lan) */ + adapter->tx_fifo_head = ctrlext; + + /* clear the serdes mode bits, putting the device into mac loopback */ + ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; + ew32(CTRL_EXT, ctrlext); + + /* force speed to 1000/FD, link up */ + ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | + E1000_CTRL_SPD_1000 | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* set mac loopback */ + ctrl = er32(RCTL); + ctrl |= E1000_RCTL_LBM_MAC; + ew32(RCTL, ctrl); + + /* set testing mode parameters (no need to reset later) */ +#define KMRNCTRLSTA_OPMODE (0x1F << 16) +#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582 + ew32(KMRNCTRLSTA, + (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII)); + + return 0; +} + +static int e1000_setup_loopback_test(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + switch (hw->mac.type) { + case e1000_80003es2lan: + return e1000_set_es2lan_mac_loopback(adapter); + break; + case e1000_82571: + case e1000_82572: + return e1000_set_82571_fiber_loopback(adapter); + break; + default: + rctl = er32(RCTL); + rctl |= E1000_RCTL_LBM_TCVR; + ew32(RCTL, rctl); + return 0; + } + } else if (hw->media_type == e1000_media_type_copper) { + return e1000_integrated_phy_loopback(adapter); + } + + return 7; +} + +static void e1000_loopback_cleanup(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + u32 rctl; + u16 phy_reg; + + rctl = er32(RCTL); + rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); + ew32(RCTL, rctl); + + switch (hw->mac.type) { + case e1000_80003es2lan: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { + /* restore CTRL_EXT, stealing space from tx_fifo_head */ + ew32(CTRL_EXT, + adapter->tx_fifo_head); + adapter->tx_fifo_head = 0; + } + /* fall through */ + case e1000_82571: + case e1000_82572: + if (hw->media_type == e1000_media_type_fiber || + hw->media_type == e1000_media_type_internal_serdes) { +#define E1000_SERDES_LB_OFF 0x400 + ew32(SCTL, E1000_SERDES_LB_OFF); + msleep(10); + break; + } + /* Fall Through */ + default: + hw->mac.autoneg = 1; + if (hw->phy.type == e1000_phy_gg82563) + e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); + e1e_rphy(hw, PHY_CONTROL, &phy_reg); + if (phy_reg & MII_CR_LOOPBACK) { + phy_reg &= ~MII_CR_LOOPBACK; + e1e_wphy(hw, PHY_CONTROL, phy_reg); + e1000e_commit_phy(hw); + } + break; + } +} + +static void e1000_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size &= ~1; + memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); + memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); + memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); +} + +static int e1000_check_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + frame_size &= ~1; + if (*(skb->data + 3) == 0xFF) + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && + (*(skb->data + frame_size / 2 + 12) == 0xAF)) + return 0; + return 13; +} + +static int e1000_run_loopback_test(struct e1000_adapter *adapter) +{ + struct e1000_ring *tx_ring = &adapter->test_tx_ring; + struct e1000_ring *rx_ring = &adapter->test_rx_ring; + struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; + int i, j, k, l; + int lc; + int good_cnt; + int ret_val = 0; + unsigned long time; + + ew32(RDT, rx_ring->count - 1); + + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rx_ring->count <= tx_ring->count) + lc = ((tx_ring->count / 64) * 2) + 1; + else + lc = ((rx_ring->count / 64) * 2) + 1; + + k = 0; + l = 0; + for (j = 0; j <= lc; j++) { /* loop count loop */ + for (i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame( + tx_ring->buffer_info[i].skb, 1024); + pci_dma_sync_single_for_device(pdev, + tx_ring->buffer_info[k].dma, + tx_ring->buffer_info[k].length, + PCI_DMA_TODEVICE); + k++; + if (k == tx_ring->count) + k = 0; + } + ew32(TDT, k); + msleep(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rx_ring->buffer_info[l].dma, 2048, + PCI_DMA_FROMDEVICE); + + ret_val = e1000_check_lbtest_frame( + rx_ring->buffer_info[l].skb, 1024); + if (!ret_val) + good_cnt++; + l++; + if (l == rx_ring->count) + l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while ((good_cnt < 64) && !time_after(jiffies, time + 20)); + if (good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if (jiffies >= (time + 2)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ + return ret_val; +} + +static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) +{ + /* PHY loopback cannot be performed if SoL/IDER + * sessions are active */ + if (e1000_check_reset_block(&adapter->hw)) { + ndev_err(adapter->netdev, "Cannot do PHY loopback test " + "when SoL/IDER is active.\n"); + *data = 0; + goto out; + } + + *data = e1000_setup_desc_rings(adapter); + if (data) + goto out; + + *data = e1000_setup_loopback_test(adapter); + if (data) + goto err_loopback; + + *data = e1000_run_loopback_test(adapter); + e1000_loopback_cleanup(adapter); + +err_loopback: + e1000_free_desc_rings(adapter); +out: + return *data; +} + +static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) +{ + struct e1000_hw *hw = &adapter->hw; + + *data = 0; + if (hw->media_type == e1000_media_type_internal_serdes) { + int i = 0; + hw->mac.serdes_has_link = 0; + + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ + do { + hw->mac.ops.check_for_link(hw); + if (hw->mac.serdes_has_link) + return *data; + msleep(20); + } while (i++ < 3750); + + *data = 1; + } else { + hw->mac.ops.check_for_link(hw); + if (hw->mac.autoneg) + msleep(4000); + + if (!(er32(STATUS) & + E1000_STATUS_LU)) + *data = 1; + } + return *data; +} + +static int e1000_diag_test_count(struct net_device *netdev) +{ + return E1000_TEST_LEN; +} + +static void e1000_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + u16 autoneg_advertised; + u8 forced_speed_duplex; + u8 autoneg; + bool if_running = netif_running(netdev); + + set_bit(__E1000_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + /* save speed, duplex, autoneg settings */ + autoneg_advertised = adapter->hw.phy.autoneg_advertised; + forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; + autoneg = adapter->hw.mac.autoneg; + + ndev_info(netdev, "offline testing starting\n"); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + e1000e_reset(adapter); + + if (e1000_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000e_reset(adapter); + if (e1000_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000e_reset(adapter); + if (e1000_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + e1000e_reset(adapter); + /* make sure the phy is powered up */ + e1000e_power_up_phy(adapter); + if (e1000_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* restore speed, duplex, autoneg settings */ + adapter->hw.phy.autoneg_advertised = autoneg_advertised; + adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; + adapter->hw.mac.autoneg = autoneg; + + /* force this routine to wait until autoneg complete/timeout */ + adapter->hw.phy.wait_for_link = 1; + e1000e_reset(adapter); + adapter->hw.phy.wait_for_link = 0; + + clear_bit(__E1000_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + ndev_info(netdev, "online testing starting\n"); + /* Online tests */ + if (e1000_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__E1000_TESTING, &adapter->state); + } + msleep_interruptible(4 * 1000); +} + +static void e1000_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + wol->supported = 0; + wol->wolopts = 0; + + if (!(adapter->flags & FLAG_HAS_WOL)) + return; + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + + /* apply any specific unsupported masks here */ + if (adapter->flags & FLAG_NO_WAKE_UCAST) { + wol->supported &= ~WAKE_UCAST; + + if (adapter->wol & E1000_WUFC_EX) + ndev_err(netdev, "Interface does not support " + "directed (unicast) frame wake-up packets\n"); + } + + if (adapter->wol & E1000_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & E1000_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & E1000_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & E1000_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; +} + +static int e1000_set_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (!(adapter->flags & FLAG_HAS_WOL)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + /* these settings will always override what we currently have */ + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= E1000_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= E1000_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= E1000_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= E1000_WUFC_MAG; + + return 0; +} + +/* toggle LED 4 times per second = 2 "blinks" per second */ +#define E1000_ID_INTERVAL (HZ/4) + +/* bit defines for adapter->led_status */ +#define E1000_LED_ON 0 + +static void e1000_led_blink_callback(unsigned long data) +{ + struct e1000_adapter *adapter = (struct e1000_adapter *) data; + + if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) + adapter->hw.mac.ops.led_off(&adapter->hw); + else + adapter->hw.mac.ops.led_on(&adapter->hw); + + mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL); +} + +static int e1000_phys_id(struct net_device *netdev, u32 data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + + if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + if (adapter->hw.phy.type == e1000_phy_ife) { + if (!adapter->blink_timer.function) { + init_timer(&adapter->blink_timer); + adapter->blink_timer.function = + e1000_led_blink_callback; + adapter->blink_timer.data = (unsigned long) adapter; + } + mod_timer(&adapter->blink_timer, jiffies); + msleep_interruptible(data * 1000); + del_timer_sync(&adapter->blink_timer); + e1e_wphy(&adapter->hw, + IFE_PHY_SPECIAL_CONTROL_LED, 0); + } else { + e1000e_blink_led(&adapter->hw); + msleep_interruptible(data * 1000); + } + + adapter->hw.mac.ops.led_off(&adapter->hw); + clear_bit(E1000_LED_ON, &adapter->led_status); + adapter->hw.mac.ops.cleanup_led(&adapter->hw); + + return 0; +} + +static int e1000_nway_reset(struct net_device *netdev) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + if (netif_running(netdev)) + e1000e_reinit_locked(adapter); + return 0; +} + +static int e1000_get_stats_count(struct net_device *netdev) +{ + return E1000_STATS_LEN; +} + +static void e1000_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, + u64 *data) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + int i; + + e1000e_update_stats(adapter); + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset; + data[i] = (e1000_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } +} + +static void e1000_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + u8 *p = data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *e1000_gstrings_test, + E1000_TEST_LEN*ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { + memcpy(p, e1000_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static const struct ethtool_ops e1000_ethtool_ops = { + .get_settings = e1000_get_settings, + .set_settings = e1000_set_settings, + .get_drvinfo = e1000_get_drvinfo, + .get_regs_len = e1000_get_regs_len, + .get_regs = e1000_get_regs, + .get_wol = e1000_get_wol, + .set_wol = e1000_set_wol, + .get_msglevel = e1000_get_msglevel, + .set_msglevel = e1000_set_msglevel, + .nway_reset = e1000_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = e1000_get_eeprom_len, + .get_eeprom = e1000_get_eeprom, + .set_eeprom = e1000_set_eeprom, + .get_ringparam = e1000_get_ringparam, + .set_ringparam = e1000_set_ringparam, + .get_pauseparam = e1000_get_pauseparam, + .set_pauseparam = e1000_set_pauseparam, + .get_rx_csum = e1000_get_rx_csum, + .set_rx_csum = e1000_set_rx_csum, + .get_tx_csum = e1000_get_tx_csum, + .set_tx_csum = e1000_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = e1000_set_tso, + .self_test_count = e1000_diag_test_count, + .self_test = e1000_diag_test, + .get_strings = e1000_get_strings, + .phys_id = e1000_phys_id, + .get_stats_count = e1000_get_stats_count, + .get_ethtool_stats = e1000_get_ethtool_stats, +}; + +void e1000e_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); +} |
